Hi, i want to show my CellID on Homescreen with HS++ (Homescreen plus plus).
But on my hd2 there is no CellID shown. On my former polaris it worked with a wm6.5.3 rom.
Any ideas?
I even can´t find this option in telephone/menu.
On my other devices there is an extra menu-entry to enable this. Where can i find this on HD2?
Also missing is the Cell-Text-Messages (short messages available, like RDS-text on fm-radio).
On my former polaris this was working:
HOW TO DISABLE THE “DING” NOTIFICATION SOUND FOR SENT SMS
1. Install a registry editor like Resco File Explorer’s add-on registry editor or PHM registry editor.
2. Open HKEY_CURRENT_USER
3. Tap control panel>notifications
4. Tap default
5. Tap options
6. Choose what value will be applicable to you and replace the default number with it (for XDA Atom, the number was 13, I replaced it with 8 to suit my preference):
0 – show icon
1 – show icon and play notification sound
2 – show icon and vibration
3 – show icon and vibration and play notification sound
4 – same as 0
5 – same as 1
6 – same as 3
7 – same as 3
8 – show icon and notification bubble
9 – show icon and play notification sound and show notification bubble
10 – show icon and notification bubble and vibration
7. If you want to configure how long the notification bubble will stay on the screen, tap on duration instead of options. Change the number there into the number of seconds you want the notification bubble to stay up.
Click to expand...
Click to collapse
Look here: http://www.4winmobile.com/forums/ht...-disable-sound-but-keep-popup.html#post130673
But it seems not to work on HD2.
On my HD2 with 1.48 Stock-ROM there was "13" by default.
Related
I did search but couldn't find anything relevant.
Is there some kind of reg hack that turns off the vibrate notification when sending a text message if the phone is set to vibrate mode? Makes is tricky to send a sneaky txt during a meeting as it is.
Cheers.
try downloading pocketzenphone its a great app for sorting out profiles to turn on/off stuff like vibrating, message alerts etc.....it hasnt the ability to turn off the 'sms sent' feature but it no longer vibrates on mine!?
Id suggest using the beta 3 release (no problems to report) as for some reason some alerts dont work correctly with the 6.0 release on the TyTN.
Its easier to switch between preset profiles using this too.
Nice thanks. I'll check it out.
got this from one of the threads here...
Use a registry editor and go to:
HKCU\control panel\notifications\default\options
change the dword value to whatever suits your needs.
here are the following dword value and corresponding results:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
Hi all,
I tweaked my devices (Qtek 9000 & HTC 3300) with this registry setting:
http://forum.xda-developers.com/viewtopic.php?t=15663
Now I still want to receive those "Delivery Reports", but I would like to disable the standard SMS Sound or add another sound for them. Then I can easily know if I receive a SMS Message or Delivery Report.
Anyone knows how to tweak this or how to do this?
Thanks in advance!
Sam
here
this was posted somewhere in the forum...cannot rem...
i only have the message sent notification
*************************************
There are a couple of threads on disabling the "Message Sent" notification bubble, such as this thread. Here's something different. If you still want the message sent notification to appear but in a different way, you can also do so.
Registry Key: HKCU\Control Panel\Notifications\Default
Registry Value: Options
Registry Data: 0 to 11
Here are the description for the different registry data values:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
samvds said:
Hi all,
I tweaked my devices (Qtek 9000 & HTC 3300) with this registry setting:
http://forum.xda-developers.com/viewtopic.php?t=15663
Now I still want to receive those "Delivery Reports", but I would like to disable the standard SMS Sound or add another sound for them. Then I can easily know if I receive a SMS Message or Delivery Report.
Anyone knows how to tweak this or how to do this?
Thanks in advance!
Sam
Click to expand...
Click to collapse
I'm searching for the same thing.
Did you came up with any solution?
Cheers
Thank you!
xmonster said:
Registry Key: HKCU\Control Panel\Notifications\Default
Registry Value: Options
Registry Data: 0 to 11
Here are the description for the different registry data values:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
Click to expand...
Click to collapse
that's exactly what I was looking for, with value set to 2 I ony get a topbar icon and a vibration to confirm that my message has been sent.
Works on WM 6.5.
If i do a request like *222#, I get the response as show in the images. Now when i get that response, i also get a sound which is the notify.wav sound. I tried and searched everywhere in the registry, changed everything i could possibly change which had notify in it. But i still get that sound. I tried notification and reminders. No use. How to set it to not make that sound?
Any ideas?
Well, it is like the tail wagging the dog, but you can try replacing the notify.wav with a silent wav file (or whatever sound you like). Just make sure your other notification sounds are not using this notify.wav.
Use Total Commander (or similar, not Fie Explorer) to over write the notify.wav.
Use a registry editor and go to:
HKCU\control panel\notifications\default\options
change the dword value to whatever suits your needs.
here are the following dword value and corresponding results:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
I need this answered within a few hours.. Whenever i put my phone on vibrate and get a text it gives me a longgggg vibrate.. no matter what i put the sound to its always a long vibrate.. is there anyway so i can make the vibrate short?
*bump*
Is there a registry entry or something that can be edited that removes the confirmation of sent text noise/vibrate and make it just the confirmation screen?
Tweak Description
Disable DING notification for SMS sent 1. Install a registry editor like Resco File Explorer’s add-on registry editor or PHM registry editor.
2. Open HKEY_CURRENT_USER
3. Tap control panel>notifications
4. Tap default
5. Tap options
6. Choose what value will be applicable to you and replace the default number with it (for XDA Atom, the number was 13, I replaced it with 8 to suit my preference):
0 – show icon
1 – show icon and play notification sound
2 – show icon and vibration
3 – show icon and vibration and play notification sound
4 – same as 0
5 – same as 1
6 – same as 3
7 – same as 3
8 – show icon and notification bubble
9 – show icon and play notification sound and show notification bubble
10 – show icon and notification bubble and vibration
7. If you want to configure how long the notification bubble will stay on the screen, tap on duration instead of options. Change the number there into the number of seconds you want the notification bubble to stay up.
please note not my tweak credit is due else where
Should have made you wait longer try searching next time google is a wonderful place my son!
Thanks a whole bunch, I always forget to hit up my boy Google first when it comes to phone issues. Appreciate it!
I know that Jasjam had Pimp My Black for his Hermes Black ROMs (which I used on my old Hermes) and was hoping to find similar fixes for the Polaris/Cruise.
The main annoyance is the SMS confirmation msg/alert. Anyone know how to remove it?
I've tried going into registry but changing the settings there along similar lines to the Hermes achieved nothing.
Dont know what exactly is Pimp My Black, byt U can try to use "black bars" they are somewhere here, search for it (it makes both bars-top&bottom black)
SMS confirmation alert - shaps advanced config, sktools, kaisertweak
le_paulo said:
I know that Jasjam had Pimp My Black for his Hermes Black ROMs (which I used on my old Hermes) and was hoping to find similar fixes for the Polaris/Cruise.
The main annoyance is the SMS confirmation msg/alert. Anyone know how to remove it?
I've tried going into registry but changing the settings there along similar lines to the Hermes achieved nothing.
Click to expand...
Click to collapse
If you try Schap's advanced configuration tool v.2.02.0.2.0 u have the option to disable SMS sent notification, and delivery notification.
Thanks Gents - Schap's Tool works a treat...
For everyone else:
http://forum.xda-developers.com/showpost.php?p=1817956&postcount=4
here try this!!!
use the registry editor of your choice;
HKCU\Control Panel\Notifications\Default\Options
change the dword value to whatever suits your needs.
here are the following dword value and corresponding results:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
i use 0 and it works flawlessly..... hope this helps
xrrkrrkx said:
use the registry editor of your choice;
HKCU\Control Panel\Notifications\Default\Options
change the dword value to whatever suits your needs.
here are the following dword value and corresponding results:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
i use 0 and it works flawlessly..... hope this helps
Click to expand...
Click to collapse
This is great
But is there any way to change the notification sound?
HKCU\Control Panel\Notifications\Default\Wave
Change the location of the notification sound from
\Windows\Alarm2.wav to \Windows\"alert tone of your choice" (w/o quote)
Let me know if this works.
xrrkrrkx said:
use the registry editor of your choice;
HKCU\Control Panel\Notifications\Default\Options
change the dword value to whatever suits your needs.
here are the following dword value and corresponding results:
0 - show icon
1 - show icon and play notification sound
2 - show icon and vibration
3 - show icon and vibration and play notification sound
4 - same as 0
5 - same as 1
6 - same as 3
7 - same as 3
8 - show icon and notification bubble
9 - show icon and play notification sound and show notification bubble
10 - show icon and notification bubble and vibration
11 - show icon and play notification sound and show notification bubble and vibration
i use 0 and it works flawlessly..... hope this helps
Click to expand...
Click to collapse
This didnt work for me...and my options was set on 13 :S?
Advanced config 2 ffs >_<. Though the send notification is gone, but not the revieve. I see the pop-up everytime when i get a msg
reg edit worked
Old thread I know, but the reg edit suggested by calvin_M worked flawlessly using CERegEditor.
HKEY_LOCAL_MACHINE\Software\Microsoft\Inbox\Settings.
Create the SMSNoMsgSent in there with the value 1
anyone know how to keep the phone asleep when receiving a text message?
On an old custom Rom, (cant remember which) I had a sound, vibrate ticked,display message unticked.
the phone would just make a sound and vibrate and stay asleep.
doesnt work anymore on the latest roms. im currently using 3liteVI
phsnake said:
Dont know what exactly is Pimp My Black, byt U can try to use "black bars" they are somewhere here, search for it (it makes both bars-top&bottom black)
SMS confirmation alert - shaps advanced config, sktools, kaisertweak
Click to expand...
Click to collapse
'Pimp My Black' was a splendid configuration tool created for the Hermes by the legendary jasjamming I believe....