I have elfin and skype can not work. I can chat but i can not call or recive calls. When i try to make a call it rings and then skype shuts down. then i can see the icon of a phone on the top of my display and that is it. I can not make a call. I nead to start the skype again and then is the icon gone but the calling is still a mistery. does anybody know what do i nead to do to fix that
maybe it doesn't work because it didn't meet the requirements to make a call... Try using wifi connection... it might work
no luck with wifi to. same problem. thanks for adwice but i nead to find another solution
Related
Has anyone ever successfully make/answer a TAPI data call? I can have the voice call working but not the data one.
Can someone point me some example?
thanks.
look into source code at www.cryptophone.de
the idea is to kill cprog.exe application so that it does not pops up at incoming call. Than you can answer the data call as usual using TAPI.
When I was making a data call, the receiving XDA did not popup the cprog at all. And my program at receiving side didn't show any message either. (But it works fine with voice call and the cprog showed up to intercept the call). Does this problem indicate that the data call doesn't work at all?
If I can get rid of the cprog, do you think the data call will get through?
thanks,
- David
this seems to be a problem of your operator. Maybe it does not support incoming data calls.
Hey all , my issue is about making DATA CALLS !!!!
I have managed to get the modem in my XDA2 to respond to my AT COMMANDS however i dont think that a data call is possible the old way. So i want to investigate TAPI , i have managed to write up a function which calls a number by the function TapiRequestMakeCall but i am not too sure how to use the other functions .... wanna HELP ?>??
Is it actually possible to make data calls by using TAPI ???
Yes it is.
Did you look at an answer I gave you a while back ?
http://forum.xda-developers.com/viewtopic.php?t=1716
Cheers
Paul
Hi all,
I've been messing around with the VoIP capabilities on my Dopod 838 with Pandoras Kitchen built ROM...
I've selected the VoIP options and making a call works perfectly as well as having incoming calls work ok. What I have noticed however is that when I make an outgoing call, there is no ringback to indicate that the call is ringing. I get silence from when the dial command starts until someone answers the phone.
Is this a known issue? is it related to Pandoras ROM? a generic issue? something else?
EDIT: \Windows\ringback.wma is present... I can't find much else to check :|
Use a registry editor and go to:
HKEY_CURRENT_USER\ControlPanel\Sounds\DialingVoIP
Check that the <Sound> string is set to a valid sound file.
I'm using Midi2Wave_079_4098.wav and is works fine.
Good luck!
Ahhh ok - I shall try this when I get my unit back. At the moment it's in for repair as I've only ever managed to get ~8 hours battery life on standby. They've had it 3 weeks at the moment, and it doesn't look like I'll get it back for at least another week, maybe 2
HI
i almost install 100 ROM on my phone all dont work well with sip settings and voipstunt
when i put my sip settings in phone and try to call always voice come from speaker and also tooo low to hear i always use headphone so i can listen what people saying on phone using VOIP call
is there any software or anything els i can use to call voip and listen normal voice from phone like when i use GSM carrier
i have iphone when i use with that it work perfect and no problem i change to HTC HD but this is the only problem im not able to solve
please help regarding this
than take your damn iPhone dude!!!
no use just use portsip works lovely. http://forum.xda-developers.com/showthread.php?t=508715
regards
btw. wrong section
chamkilla said:
HI
i almost install 100 ROM on my phone all dont work well with sip settings and voipstunt
when i put my sip settings in phone and try to call always voice come from speaker and also tooo low to hear i always use headphone so i can listen what people saying on phone using VOIP call
is there any software or anything els i can use to call voip and listen normal voice from phone like when i use GSM carrier
i have iphone when i use with that it work perfect and no problem i change to HTC HD but this is the only problem im not able to solve
please help regarding this
Click to expand...
Click to collapse
Use this VOIP client.
http://forum.ppcwarez.org/viewtopic.php?f=41&t=95190&hilit=agephone
It changes the sound to ear-piece during call. Fast switch between different SIP service providers, use of WM phone book etc.
MOD EDIT - Move to general discussion
Hello guys! I have been trying to make internet calls with my new HTC HD2, and so far I have not managed to make it work properly.
Actually after testing PortSip I almost got it, but the problem I have with this software is that my voice is not being heard at all/clear enough. I can hear the person I'm calling very well, without delays, but they can not hear me. I tried using BT headset, normal headset, and without headsets for the same result, not being heard.
Could it be that the microphone is set too low? is there any way to increase it?
Any help would be appreciated.
Thnx.
I use PortSip without any such problem....
Try fring as an alternate solution...may work for you...
Are you connecting to your own VOIP server? If so, make sure that the correct ports are open.
I had the same problem with portsip. I find Agephone to work nicely, only problem with it not being able to direct sound to the earpiece so you will need some software that does that instead.
After a lot of testing, I'm still in the same situation. I'd be great to make voip calls to work. I am certain there's some settings in windows mobile (codecs maybe) that my voip provider don't like, and therefore calls drop.
My voip provider is Saunalahti (Finland) which actually rents the gsm network from Elisa.
I am trying making calls from two different voip accounts, calling other voip numbers and normal gsm numbers. I am using one HD2, one TYTN and a Softphone that Saunalahti offers.
The only way that the calls work is calling from the softphone in the PC, no problem there. I have audio both ways and calls do not drop.
If I call from:
wm to PC, call drops (lasts 2 sec)
wm to wm, call drops (lasts 2 sec)
wm to gsm, connects but the other person can not hear me
One wm is using 3G and the other is using WIFI. port 5060 is open in the registry.
Like a said earlier, I have tried different programs, but it's the same scenario.
Any idea on what the problem actually is? thnx i nadcance.
Hi guys,
I am interested in VoIP calling with my HD2. I don't know much about this, and I would like to be able to use it when I travel to Mexico next month. I know that Blackberry's have UMA technology or soemthing like that to make WiFi calling for free back to the states. Will this PortGo/PortSip program do the same thing if I use the free version, or buy the Professional version?
האם אפשר לקבל עזרה בעיברית להפעלת voip
gorelshv said:
i had the same problem with portsip. I find agephone to work nicely, only problem with it not being able to direct sound to the earpiece so you will need some software that does that instead.
Click to expand...
Click to collapse
האם אפשר לקבל עזרה בשפת הקודש?
I'm fancing strange problem. I can call out to anybody and we can talk, but when someone call to me there is one signal and then message from network like: person U want reach is temporary unavinable...
So noone can call me
Is there any option in android to automaticaly reject calls? I wasn't changing anything in settings or soo, it stops working suddenly ;/