Related
Hi all,
I just got a TyTN and was instantly very impressed with the camera's quality. So i tried my DirectShow camera library which I know to run fine on the HTC Wizard/Universal/Tornado devices, but I immediatelly realized the following problem:
When i enumerate the camera modes on the TyTN, the only mode i get is 160x120, 7.5Hz, YUV12. While my lib can play that back without problems, I'd rather acess those modes with higher resolution and framerate.
Looking at the built-in camera tool and comparing the video quality againt other devices I'd guess the preview runs at 320x240 at 7.5 Hz (video quality of the preview is really great). I already checked that this is the higher quality camera on the back side and not the low quality camera on the front side.
Is HTC trying to block us from using the more advanced camera modes via DirectShow or am i missing something here?
thanks for any hints,
Daniel
Hi,
Sorry to disturb your thread
But I was wondering if you know if it's possible to re-flash the HTC TyTN to an English firmware.
Currently I have the French version of the HTC TyTN with an azerty keyboard and french language.
I would like to keep the azerty layout, but change the language to English.
Let me know if you have any experience with this.
Thanks
I have been reflashing and unlocking my HTC Universal which all worked fine, but i did not reflash the HTC TyTN yet - I already got it today. Since it is in english (the language i prefer for developing on it) i also have little reason to do so...
Still maybe anybody has an idea about the DirectShow issue?
Any experiences like that on other devices?
Daniel
I'm willing to bet you have a G4 flash chip in that TyTN. What's your IPL/SPL rev level?
On the camera.... is there any chance that DirectShow is enumerating the front camera instead of the back? Perhaps it isn't properly coded for a device that actually has two cameras.
> On the camera.... is there any chance that DirectShow is enumerating the front camera instead of the back? Perhaps it isn't properly coded for a device that actually has two cameras.
that was also my first thought, although even that camera can do more. but streaming out the pictures i read from the camera confirms that it is the back camera.
maybe you are right and there is a bug in the DirectShow driver of HTC. i never tried enumerating the 2nd camera, but maybe it is worth a try now...
Daniel
Hi, could you dump the english version to an image and upload it somewhere ? On the XDA ftp for example.
Or is that asking too much ?
> What's your IPL/SPL rev level?
Sorry to ask, but where can I find this ? The power+camera button solution apparently doesn't work with the HTC TyTN, or I'm doing it the wrong way.
General info:
ROM version: 1.18.256.2
Radio version: 1.03.03.10
Protocol version: 32.34.7010.01H
ROM ext ver: 1.18.256.103
That's all i could find.
Hope it helps.
when you first boot it, does it display the spl/ipl revision on the initial splash screen?
My ROM shows the following numbers
M05
S04
B05
R 1.03.03.10
G 32.34.7010.01H
D 1.18
i'm not quite sure how to read that and i never dumped a ROM yet. if you tell me how to do it i might give it a try...
Daniel
All the versions are the same for me too,
M05
S04
B05
R 1.03.03.10
G 32.43.7010.01H
D 1.18
But I'm currently also unaware of how to dump an image, tried using the same mechanism as for the other Qteks.
But holding the power + camera for 1 second, then releasing the power button, but still holding the camera button will do nothing.
Anyone got an idea ? Going to search around on the net to see if i can get more information.
Thanks
The world has changed, apparently! :shock:
Anyone have updates on this subject?
Seems that the front camera isn't listed on DirectShow...
Anyone knows a solution?
Thanks
Hi,
I've a big camera problem with my new prophet (i-mate jamin).
This is a photo taken with the camera, you can notice the vertical line I can't kill :x
I've tried a different camera program (Coolcamera) but the result are still the same...
Do you have any suggestion before I trew it out of the window?!
up
Yikes!
It seems to me like your CMOS camera is faulty...
Time to make use of your warranty...
There seems to be not much you can do exept maybe try some other camera software just in case. (CoolCamera).
If it also displays the same line then it's a CMOS problem.
Good luck!
Rayan
Yesterday I've had a nice speaking with the i-mate online helpdesk. They made me upload the Rom, but with no result. Then they suggest me the same solution you've proposed...
I brought it back to the shop and they changed it without any problem with a new one..(strange indeed..it made me think it was not the first return they had...).
Now I've a new s200 with no camera problem. Hope the random phone freeze are solved too, but I'm not so optimistic...let's see after some deeper tests...
Thanks for answering me,
andrea
I need help from you TyTn professionals
I got a HTC TyTn with the Vodafone Portuguese Rom (Rom:1.18.260.2, Radio:1.16.00.00, Extended Rom:1.18.260.105)
I tried to make a video call but I was unsuccessful (on the top of the phone there is an U meaning it is a 3G covered area) I could not hear or see the other person neither my video fee
I download coolcamera and webcamera+ trial and was unsuccessful in activating the front camera (black screen only)...
could this be a ROM problem???? or am I doing something wrong????
thanks in advanced...
Yes
there might be some problem in your ROM definitly..
I suggest upgrade your ROM.
Front camera issue
I have the same problem with my front camera...just installed the newest WebCamera Plus, main camera and screen sharing work excellent! I still have an problem with the front camera, when the source is switched to front, it just sits and spins.
I contacted HTC and they say the only way to test it is to video call in 3G.
I did find the link to the video calling cabs and installed them after upgrading to WMXL 2.01. (the camera didn't work with WM5 either).
I'm in Chicago this weekend, unfortunately I don't know anyone I can call to test this with. (hint hint, wink, wink, nudge, nudge)
I read through all the posts and WIKI and didn't see this problem resolved.
Suggestions are very welcome!
hardware problem
I also have the problem that the front camera on my tytn doesn't work.
I'v tested it with different kind of roms (not the xda live version though) but it never worked.
I guess it's a hardware problem.
A couple of weeks ago I did send it to htc repair center, but unfortunately they did not fix it. I didn't send it in again, because I dont want to loose my tytn that long (last time it took nearly 2 months before I got it back) and I really do not use video calling that much.
Ouch!
Well if I had to send mine in, I would have to get another one first!
I have flashed both Cingular and HTC ROMS (5 times) to see if that was an issue, buy no avail. There is no 3G where I live but I really want it to work...oh well, could be worse.
Cam
Mine too -
also not working showing only black screen in phone mode
-> camera apps are saying not able to initialize !!
Rom problem -> because initialisation error or hardware prob?
Who can help!
PS: Working on Black 3.0.1
I've had the exact same problem!!
tried many ROM versions and no solution...
I have the same prob.
Anyone can help me. i tried the coolcamera and it is black also.. any advise
Front Camera not working!!! In US?
I am not sure that the video calling feature is supported yet in the US... did anyone contact your provider... As far as I know, if you are not in a 3G area, videocalling won't work... And you still need for that feature to be supported by your wireless carrier...
Just my two cents... If you do get it to work, PM me and we can use it together... Since AT&T isn't offering it yet, I will be happy when they do...
I don't think it is a hardware error, cause there are a lot of users having the same problem.
so i will add my Herm300 currently working on LVSW and originally from Tmobile UK to the list of same front camera problem herm's
tried couple of roms and all the time same black screen :/
anybody any clue ?
I also can't use the main camera in Video Call
any body know how to use the main camera in Video Call,, i press the toggle since i was in the call.. but it also black ... but when i go out of the call and go to camera it give me black. but if i close it and open it again it work fine....
kefou said:
any body know how to use the main camera in Video Call,, i press the toggle since i was in the call.. but it also black ... but when i go out of the call and go to camera it give me black. but if i close it and open it again it work fine....
Click to expand...
Click to collapse
Sane thing here.
This problem is very weird! - I see many of us are having it
wecamera plus working on my hermes
hi guys, i have i-mate jasjam (hermes) and the rom is:
ROM versioro BLACK 3.0.1
ROM date:01/04/07
Rom version: 1.38.00.10
protocol version: 32.71.7020.12H
and i have installed Webcamera plus, and working perfectly on both, front and main camera. and to switch between them, all i have to do is, after running the webcamera plus, go to menu/source and select the soirce. wether the front sensor or the camera
note: you may find in the menu of the webcamera plus the word "sensor". sensor refers to the front camera.
thank u guys, and good luck
rassien said:
hi guys, i have i-mate jasjam (hermes) and the rom is:
ROM versioro BLACK 3.0.1
ROM date:01/04/07
Rom version: 1.38.00.10
protocol version: 32.71.7020.12H
and i have installed Webcamera plus, and working perfectly on both, front and main camera. and to switch between them, all i have to do is, after running the webcamera plus, go to menu/source and select the soirce. wether the front sensor or the camera
note: you may find in the menu of the webcamera plus the word "sensor". sensor refers to the front camera.
thank u guys, and good luck
Click to expand...
Click to collapse
You said that it works fine.. ok before you upgrade to ROM version (Pro Black 3.0.1) the front camera are not working or it was workin????
Just tried, it's not working - I get a device.exe error.
this is really wierd, can you guys make a video call with the back camera on? (i get the black screen with it two...)
I can take pictures with no problems...
we need HELP
we need HELP .... i contact the support and they didn't reply me.
kefou said:
You said that it works fine.. ok before you upgrade to ROM version (Pro Black 3.0.1) the front camera are not working or it was workin????
Click to expand...
Click to collapse
frankly, i didn't try it before upgrading the rom.
my working front webcam plus
my webcam version is: 1.04
http://www.ateksoft.com
Webcam doesnt work - is no help!
Webcam worked also for the front camera before this black phenemon happend to me!
Now nothing is working - the fault has begun with wired picture lines and rows (back camera) - ended up with none working front camera - and with a back camera which have to be opened twice (first time starting also black) before working.
Help is really needed ! Are there any Initialisation Files or sth. like that for testing purposes to get rid of this.....
Thanx
My Ameo,s main camera started by showing blurry and distorted image, then the camera does not start all together at time and the last issue is that when it finally started nothing was showing on the main camera as of now but the inner camera is working good... tweaked all settings, NO WAY! could this be as a result of a corrupt camera application in the extended rom or a manufacturer defect?
If it is an application problem, can someone please post the appliaction .cab file.
thanks
bR
essojay said:
My Ameo,s main camera started by showing blurry and distorted image, then the camera does not start all together at time and the last issue is that when it finally started nothing was showing on the main camera as of now but the inner camera is working good... tweaked all settings, NO WAY! could this be as a result of a corrupt camera application in the extended rom or a manufacturer defect?
If it is an application problem, can someone please post the appliaction .cab file.
thanks
bR
Click to expand...
Click to collapse
I have problem with main camera too. Is cab file fix this problem?
Will you send me this cab to [email protected]?
thanks
yea dude me too...but the front vga camera seems to respond much quicker and gives better quality!
my main camera has a problem of "green color area" around the left-bottom corner of each photos
every photos took by the main carema has the same area "more green"
the green area izz DEFAULT...that cannot be fixed..since it izz a manufacturing fault from HTC!!!
bilalperwaiz said:
the green area izz DEFAULT...that cannot be fixed..since it izz a manufacturing fault from HTC!!!
Click to expand...
Click to collapse
do you have the same problem? how do you know that?
The problem I have been having soince flashing to the newest WM6 Rom
is that ever now and then the picture taken is just a solid grey.. The Camera
app works as normal, but the resulting pic. is just all grey.. It seems to happen once every 10 or so pix, sometimes more.
Madhadder said:
The problem I have been having soince flashing to the newest WM6 Rom
is that ever now and then the picture taken is just a solid grey.. The Camera
app works as normal, but the resulting pic. is just all grey.. It seems to happen once every 10 or so pix, sometimes more.
Click to expand...
Click to collapse
I have this problem, only when I place it extremely close to the screen of my laptop to take pictures of the screen.
Mine happens at all times.. Inside, Outside, still subjects, moving subjects..
It happens at random times.. 10 pix will be good the 11th is screwed then the
next 7 work, then 1 bad.. etc.etc.
hi guys.. same here. this is my first dopod.. i've been using my old xda ii and the camera is at least quite decent.. i would have thought that with the high cpu speed, refresh rate would have at least be similar to something that a nokia phone can produce.. but in a indoor setting, the main camera is like so damn blur and in sloow motion... and the result is that if i am taking a picture of my kid, it is like an artistic picture.. i see nothing!!! haha.. but with a nokia phone, at least the picture is ok.. what is wrong!?!?!
how can we improve our picture taking or it is doom???? PLLEEAASSEE someone with any solutions, please help.. i tried to download cool camera but it does not work on the u1000.
i bought the phone also to capture my kid and post the pic online.. so i m not expecting super high quality shots.. but at least something decent.. and i mean decent like at least i can tell the features of my kid.. now i see blurness.. haha
Ok I have the same problem. Does anyone have a manual on how to open up the device. I think it isn't fitted corectly and want to see if i can fix it.
Hello,
This kind of problem ?
It's coming after WM6 french version upgrade...
Fred, waiting for a solution, and searching...
Its a bunch of different results... I have not had the prob. since upgrading to the latest HTC WWE ROM.
For the moment, my main camera does not work anymore...
2 hard reset and 2 installation of the french WM6 update, nothing better...
Is-it possible to make a copy of the WM5 and WM6
HKLM/Software/HTC/Camera keys for me ?
Thanks a lot.
Fred.
Try the PK2 ROM, or the latest HTC ROM
zefred said:
For the moment, my main camera does not work anymore...
2 hard reset and 2 installation of the french WM6 update, nothing better...
Is-it possible to make a copy of the WM5 and WM6
HKLM/Software/HTC/Camera keys for me ?
Thanks a lot.
Fred.
Click to expand...
Click to collapse
It's a hardware problem. I had this problem too.
Hi, Zatesz,
Zatesz said:
It's a hardware problem. I had this problem too.
Click to expand...
Click to collapse
I think like you. My 7500 will return to the store.
Fred.
I have the X7501 with the latest HTC USA ROM. I have only taken about 15 pictures and I have seen the green distorted image and one grey frame as well. My device was locked up so I soft-reset and I have not seen the problem since. I will post here if I have any more trouble. We may be onto something here.
toyfreak said:
I have the X7501 with the latest HTC USA ROM. I have only taken about 15 pictures and I have seen the green distorted image and one grey frame as well. My device was locked up so I soft-reset and I have not seen the problem since. I will post here if I have any more trouble. We may be onto something here.
Click to expand...
Click to collapse
The first problem with my device was the green distorted image. The next level was the pink noise (1 color missed), and finally my main camera did not work anymore. The softreset and hard reset did not help me.
You should be lucky!
just a quick rehash about the topic on camera quality indoors.
i have noticed that if i lower the brightness to -2, i get really smooth video on the screen when i am trying to take a picture indoors. now if only we can have this smooth video but increase the brightness...
i don't know if i am asking too much.. is this possible? is there someways we can do this by adjusting the HKEY?
The HTC HD2 WM 6.5 I have a problem with the camera. All photos taken outdoors in daylight are OK. When shooting indoor pictures are pretty bad and two pictures taken at the same place at intervals of 10 seconds are completely različiog quality (both are bad) Please help because the photos were great until I had the original German ROM that was installed, when you buy your phone.
Which rom (WWE) that I install to solve the problem. Please note that we operate is essential to navigation and WiFi and a normal phone.
did you check the settings in the camera-menue?