Related
HSPL is released by bepe here but there is limitation of flashing ROM from SD Card if the cooked ROM image includes SPL.
Now Question and Request:
I am wondering if SPL can be removed from cooked ROM image. If yes, I would suggest to ALL CHEFS to remove SPL from the ROM image, so that everyone can flash all cooked ROM from SD Card without overwriting HSPL.
Anyone, any idea?
gd.. so it wont create confuse
Guys, when I was clarifying in bepe's thread regarding this, I think it was only a NO, NO, with having stocked Roms in the SD card as Stocked Roms would contain the SPL package.
Cooked Roms don't have this thus SD flashing should be fine...
Can I have a chef please confirm this so that this confusion can be put to rest.
band27 said:
Guys, when I was clarifying in bepe's threading regarding this, I think it was only a NO, NO, with having stocked Roms in the SD card as Stocked Roms would contain the SPL package.
Cooked Roms don't have this thus SD flashing should be fine...
Can I have a chef please confirm this so that this confusion can be put to rest.
Click to expand...
Click to collapse
You may be right.
Yeah, it would be great to have some chef confirming this so that we feel safe when flashing cooked ROM from SD card.
Ok, I have confirmation from Xannytech, SPL's are included in chef's Rom so at this stage in the development......
NEVER FLASH YOUR DEVICE USING THE SD CARD UNLESS IT"S SPECIFIED BY THE CHEF THAT ITS SAFE TO DO SO..
CHEFS should mentioned on their First page as they usually do, the Best way to Flash their Rom.
Perhaps in the future Roms maybe SD Flash Friendly, but at this stage they are NOT. Well some are but not to make matters confusing, just simple use your PC-USB way of flashing.
band27 said:
Ok, I have confirmation from Xannytech, SPL's are included in chef's Rom so at this stage in the development......
NEVER FLASH YOUR DEVICE USING THE SD CARD UNLESS IT"S SPECIFIED BY THE CHEF THAT ITS SAFE TO DO SO..
CHEFS should mentioned on their First page as they usually do, the Best way to Flash their Rom.
Perhaps in the future Roms maybe SD Flash Friendly, but at this stage they are NOT. Well some are but not to make matters confusing, just simple use your PC-USB way of flashing.
Click to expand...
Click to collapse
I don't really understand why to include SPL.nb to custom ROM... I never see this in other phone model. I'll take a look to a part of actual ROM but I really don't understand. I think to have ONLY OS.nb and some time a RADIO.nb is sufficient (and less dangerous) [SPL flash can brick the device but not OS].
So I haven't coocked with new style kitchen (old-style coocking ) I'll take a look to this.
xvx45 said:
I don't really understand why to include SPL.nb to custom ROM... I never see this in other phone model. I'll take a look to a part of actual ROM but I really don't understand. I think to have ONLY OS.nb and some time a RADIO.nb is sufficient (and less dangerous) [SPL flash can brick the device but not OS].
So I haven't coocked with new style kitchen (old-style coocking ) I'll take a look to this.
Click to expand...
Click to collapse
Same for me, I wonder why one would include SPL.
Guys, I had flashed two ROMs (Topix 1.1.2 and SONE 1.1) from SD card without any problem. HSPL was not overwritten.
However, it would be very helpful for chef to mention if their ROM includes SPL in their post.
I still don't understand HOW TO FLASH FROM SD-CARD after i applied the HSPL patch?
I read the HSPL thread but i still don't know it. Help appreciated
Darkyy said:
I still don't understand HOW TO FLASH FROM SD-CARD after i applied the HSPL patch?
I read the HSPL thread but i still don't know it. Help appreciated
Click to expand...
Click to collapse
From [TUT] How to change from one official ROM to another:
6 (normal): Put your Favourite OFFICIAL Rom on the Leo
--a:Right click on your exampleOFFICIALrom.exe and Extract it to a folder
--b:From the extracted file locate RUU_signed.nbh and rename it LEOIMG.nbh
--c:Copy the LEOIMG.nbh file to your MicroSD card
--d: Make sure your phone is charged at least 80% then power it off
--e: Press and hold the VOLUME DOWN then Press POWER button
--f: A menu will appear select (usually the power button) to continue to write the ROM
--g:After 5-10 minutes the phone should tell you the ROM was successfully written and the bar is full. You can now press reset (the small Red button beside the battery, use a pen)
Click to expand...
Click to collapse
Instead of the official ROM, copy and rename the cooked ROM of your choice...
Cheers!
Rob
vichet007 said:
Guys, I had flashed two ROMs (Topix 1.1.2 and SONE 1.1) from SD card without any problem. HSPL was not overwritten.
However, it would be very helpful for chef to mention if their ROM includes SPL in their post.
Click to expand...
Click to collapse
Xanny's Rom does include the SPL but its just not any SPL that will impact the HARD SPL , it's the SPL that contains the 1.42.000 one that will override the HDSPL.
Well quite simply I dont understand the worry.
First off, always install HSPL just in case you dont have a goldcard.
Then always flash a cooked rom with SSPL and you will never have to worry about it!
problem solved.
And should you re-install a stock ROM either via HTC's website or stage 6 as posted, re-install HSPL again.
Problem solved.
And if you're really paranoid have a goldcard anyway
chris_ah1 said:
Well quite simply I dont understand the worry.
First off, always install HSPL just in case you dont have a goldcard.
Then always flash a cooked rom with SSPL and you will never have to worry about it!
problem solved.
And should you re-install a stock ROM either via HTC's website or stage 6 as posted, re-install HSPL again.
Problem solved.
And if you're really paranoid have a goldcard anyway
Click to expand...
Click to collapse
First off, Hard SPL is to be only done once.
Secondly, having Hard SPL and using SSPL is not only redundant but makes no sense.
Thirdly, just flashing using the Active Sync bottom line.
Forth, for Folks who want to flash via SD card, just do it and you can always check Bootloader after to see if you wiped out HDSPL. No biggy, just make sure your flash HDSPL over again for your next flash.
Still easier then using SSPL & Gold Card route.
Enough Said...
Firstly: But you will have to do HSPL more than once if you flash a stock ROM or a cooked ROM that overwrites HSPL? or do no cooked roms do that?
Secondly: I only thought that you should use SSPL just incase the cooked rom overwrote HSPL?
Thirdly: duh, yeah i didnt see the obvious. sorry.
Fourth: yeah, you're right - I was just thinking what if the ROM hosed the device lol and you werent able to re-install HSPL.
I could be totally wrong - never done this stuff before. just getting the technical stuff right first before i plow in with an actual device.
thanks for any tips.
Which is the best way to flash the Leo now?
Some chefs recommend flashing back to an original rom then to a custom.
Now we have a working HSPL, until now Bepe's custom RUU was used for flashing just the OS part (and this util is still part of the Rom's on here). Do we now no longer use this and use UDK's customRUU instead?
It just seems that when I flash one custom rom over another and one over that one etc etc, I always end up with strange rom results :-/
jonboyuk said:
It just seems that when I flash one custom rom over another and one over that one etc etc, I always end up with strange rom results :-/
Click to expand...
Click to collapse
I would of thought that problems with ROMS are due more to them all being new and the chefs trying to iron out the bugs....I ended up going through most of the roms available on the site until I found one that worked for me.
The only time I install an official rom is if I have problems booting and am not able to get activesync working otherwise I just go straight over the top of whatever rom is on my device and then hard reset before booting up for the first time.
Awesome! Good advice, thank you!
Ok, just to piggyback on this. As a first time flasher (without the HD2 as yet), have i got this correct:
a) Install HSPL so I can install 1.48 or 1.61 onto my 1.43 device without goldcard by placing the HTC Rom on a FAT16 microsd card as leoimg.nbh? Then should i want to do that again I will have to re-install hspl?
b) For cooked roms, install HSPL, then use SSPL to install cooked rom. Should it all go wrong I can then put back my stock 1.61 ROM onto a sd card and voila back to work without goldcard?
chris_ah1 said:
Ok, just to piggyback on this. As a first time flasher (without the HD2 as yet), have i got this correct:
a) Install HSPL so I can install 1.48 or 1.61 onto my 1.43 device without goldcard by placing the HTC Rom on a FAT16 microsd card as leoimg.nbh? Then should i want to do that again I will have to re-install hspl?
Click to expand...
Click to collapse
I believe that the micro sd card should be formated FAT32. Just remember that when you flash an offical ROM, it will also remove the HSPL so you will need to reinstall it.
chris_ah1 said:
b) For cooked roms, install HSPL, then use SSPL to install cooked rom. Should it all go wrong I can then put back my stock 1.61 ROM onto a sd card and voila back to work without goldcard?
Click to expand...
Click to collapse
I only use SSPL, but I've got a Goldcard in case of problems.....just follow the guides and without the goldcard, it's a good idea to make sure that HSPL is installed so you've got a way to revert back if you have any problems. Hope that explains it a bit better
Yep, that's precisely what I thought. thanks for confirming it.
I understand that some regulars are getting irritated by general newbie questions but sometimes it is good just to confirm and understanding of how it all works before hosing a device and then asking stupid qs on how to fix rather than posting how great a new ROM is
sadly I'm a bit too lazy to do the goldcard thing. But I might get one done for safety.
chris_ah1 said:
Ok, just to piggyback on this. As a first time flasher (without the HD2 as yet), have i got this correct:
a) Install HSPL so I can install 1.48 or 1.61 onto my 1.43 device without goldcard by placing the HTC Rom on a FAT16 microsd card as leoimg.nbh? Then should i want to do that again I will have to re-install hspl?
b) For cooked roms, install HSPL, then use SSPL to install cooked rom. Should it all go wrong I can then put back my stock 1.61 ROM onto a sd card and voila back to work without goldcard?
Click to expand...
Click to collapse
You do not need any sspl to install a cooked rom when you've hspl'ed your leo.
You can revert back to the original spl by using the sd card method with a stock rom.
chris_ah1 said:
Yep, that's precisely what I thought. thanks for confirming it.
I understand that some regulars are getting irritated by general newbie questions but sometimes it is good just to confirm and understanding of how it all works before hosing a device and then asking stupid qs on how to fix rather than posting how great a new ROM is
sadly I'm a bit too lazy to do the goldcard thing. But I might get one done for safety.
Click to expand...
Click to collapse
too bad you got the wrong answer. there is no need for sspl or goldcard after you use HSPL. with that you can install official and custom roms. you don't have to install hspl again. just the once. UNLESS you install a official ROM with the SD card method. that will overwrite HSPL with the original (locked) SPL. you can flash a original ROM over usb. this will leave the hspl intact.
Svenvdmeer said:
too bad you got the wrong answer. there is no need for sspl or goldcard after you use HSPL. with that you can install official and custom roms. you don't have to install hspl again. just the once. UNLESS you install a official ROM with the SD card method. that will overwrite HSPL with the original (locked) SPL. you can flash a original ROM over usb. this will leave the hspl intact.
Click to expand...
Click to collapse
Am i bad, just trying to help. Still all they were after was some reassurence they wouldn't brick there device and what i said was at worst long winded.
Didn't see anyone else rushing to help.
So are we supposed to use UDK's RUU utility to flash now?
Svenvdmeer said:
too bad you got the wrong answer. there is no need for sspl or goldcard after you use HSPL. with that you can install official and custom roms. you don't have to install hspl again. just the once. UNLESS you install a official ROM with the SD card method. that will overwrite HSPL with the original (locked) SPL. you can flash a original ROM over usb. this will leave the hspl intact.
Click to expand...
Click to collapse
So no cooked ROM will over-write HSPL?
ah, good. I just saw some ROm page (i think Xannytech) which said use only SSPL.
I dunno - it's all a bit technical for a first timer. perhaps i should stick to official updates and CABs for now.
Hopefully someone can put down some clear methods/ways for the new people, as there seems to be a lot of conflicting ideas (or maybe i'm imagining it).
I just tried flashing stock 1.61 to my 1.48 Leo, (after installing HSPL, which seemed to install fine).
I done a bad flash though (for whatever reason) as the phone just went in to perpetual rebooting after the update utility completed. Just managed to get it started by reflashing 1.48 back on to it.
Well here is the issue Hskalay:
You are meant to be able to uninstall HSPL...but some say that flashing a stock rom does not uninstall it.
Some say that cooked roms include SPL.nbh and that it will overwrite HSPL. In fact some rom cookers have said in their posts to only use SSPL and not sd flashing via leoimg.nbh and HSPL. However others say that cooked ROMS do not (and should not) overwrite the HSPL.
From what I have gathered without clear consensus is that as long as HSPL is on the device, ANY rom can be installed from the sd card - cooked or official. Without HSPL you NEEDED goldcard. With HSPL you can still use goldcard but it isnt essential, as long as HSPL works and boots.
From what I have read, it appears that HSPL is a bootloader like GRUB or windows boot loader or LILO. The difference from SSPL is that HSPL gets written to the boot sector, and SSPL is a temporary fix as if you installed GRUB/LILO to your linux system partition and had the stock bootloader in the boot sector point to it to boot.
Goldcard: you dont need a working bootloader (Bepe's HSPL or stock), you dont need a working ROM.
HSPL: you need a working bootloader (i.e HSPL of course), you dont need a working ROM.
SSPL: you need working rom, and working bootloader.
If you ever over-write your Bepe HSPL you will need to put it back on. hence it is not a once only deal. However, it appears as said that it is not over-written.
Thanks for your reply Chris.
With HSPL - Do the rom HAVE to be installed via the SD card? Or can they be launch and installed from the PC (via USB). ie install HSPL to the phone, and then running the standard update program for say, 1.48 to 1.61 (which needed goldcard previously if I am correct).
Right just tested everything out this morning. Installed HSPL.
Can run installs either using CustomRUU or SSPLRUU tools either leaving the phone in active sync or in the boot loader menu by holding down Vol Down key.
To install new Radio ROM just use CustomRUU as this won't wipe your device
and just install the radio. There is a tread with all the Radio only roms here http://forum.xda-developers.com/showthread.php?t=611787
Also wiped HSPL by installing original O2 ROM and this did clear the HSPL. To install original ROM, just copy the nbh to the device, rename it to LEOIMG.nbh and then reboot into the Bootloader and it will then reinstall the rom. Just to let you know I got some wiered error when doing this and it restarted the update and then completed. Hope this helps
It's been said that at the moment you shouldn't install custom ROMs by copying the nbh files to your memory card.
Update:
To reinstall HSPL again after flashing original ROM, I had to remove my memory card or it would not work.
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Did you try to install the ROM from HTC website or did you find an Orange specific ROM?
It is an orange specific rom. cause it is a branded handy.
I even try from HTC website one but no satisfaction. I think it is normal by this one ?
I have a non branded "german" device.
I decided to go back from the HSPL to the stock SPL.
I wanted to flash with the Turkey 1.61 rom to have after this procedure the newest radio 2.07 on it.
I have followed the steps from bepe
But my SD card has a "goldcard" file on it.
Go to the HSPL thread and see my post #383
http://forum.xda-developers.com/showthread.php?t=611433
I have noted down all outputs during flashing.
At least I would give it a try and use a "Goldcard" to get back your original rom.
Hope it helps & Good luck!
dingolino
doudaix said:
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Click to expand...
Click to collapse
In addition to what the previous poster described:
One can definitely flash the original ROM using the SD card to uninstall HSPL.
Many people do it by accident...
That being said, one question: Are you sure you have the correct ROM file?
You know, the error you mention only arises if you have to answer "no" to that question.
doudaix said:
Hi,
I have a little issue: I HSPL my HD2 no problem with . It's just my phone have a hardware problem & I wanna go back to Original SPL 1.42000. I found the original rom made for my branded handy
extract and rename the .nbh
format sdcard in proper format.
neither in sync nor in bootloader mode. Invalid vendor ID. Rom Upgrade issue for me.
How can I uninstall the HSPL ?
PS/ I tried all words given by bepe and other's concerning issues. I didn't found it. I must sent back my phone soon for warrantly reason...
Click to expand...
Click to collapse
SD card should be formated FAT32. The original one is FAT16
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
tictac0566 said:
In addition to what the previous poster described:
One can definitely flash the original ROM using the SD card to uninstall HSPL.
Many people do it by accident...
That being said, one question: Are you sure you have the correct ROM file?
You know, the error you mention only arises if you have to answer "no" to that question.
Click to expand...
Click to collapse
doudaix said:
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
Click to expand...
Click to collapse
looks like the good way. is the nbh file calla LEOING.nbg in your SD card ?
doudaix said:
What does it exactly mean: "One can definitely flash the original ROM using the SD card to uninstall HSPL"
We can uninstall HSPL by loading the .nbh from the official ROM from htc website from fat32 formated sd card ?
If the answer is yes, I have done it many times but no satisfaction.
Yes I use the proper and official htc and/or orange .nbh.
How to get out please.
Click to expand...
Click to collapse
If you do all steps in the correct way, flashing the original nbh with the SD card will definitely overwrite HSPL with stock SPL.
It has happened to quite a lot of people who were not aware of the fact that this happens when flashing a stock ROM with this method.
When you get a wrong carrier ID error message, you don´t have the right ROM, as the device will only allow to flash ROMs with the correct CID, be it HTC or operator stock ROMs.
Did you check the SPL version after the process with the SD card? If it says 1.42.0000, why don´t you try flashing with the original RUU?
yes confirm
tictac0566 said:
If you do all steps in the correct way, flashing the original nbh with the SD card will definitely overwrite HSPL with stock SPL.
It has happened to quite a lot of people who were not aware of the fact that this happens when flashing a stock ROM with with this method.
When you get a wrong carrier ID error message, you don´t have the right ROM, as the device will only allow to flash ROMs with the correct CID, be it HTC or operator stock ROMs.
Did you check the SPL version after the process with the SD card? If it says 1.42.0000, why don´t you try flashing with the original RUU?
Click to expand...
Click to collapse
I confirm: it happends to me: when I flashed the 1.61 HTC official rom from my SD, it replace the HSPL by the original SPL of HTC.
hi all, just want to share..
stock spl is 1.42 and after hspl 1.42hspl or 1.42.6666 if i'm not mistaken.
if to unsintall this hspl, i use flash using sd card method and it will re write radio and spl back to 1.42.
i also using turkey stock rom, but we cannot flash turkey stock rom using sd card method as it will rewrite spl and will give you error. wrong region. if this happen, in 3 colour mode, run you hspl. when it restart, make sure you push volume down button to get back in tricolour mode. if you not pushing vol down button, it will also boot in tricolour but hspl wont work, happen to me, spl back to 1.42.000. the flash using custom ruu.
just sharing with you guys.
Steve0007 said:
looks like the good way. is the nbh file calla LEOING.nbg in your SD card ?
Click to expand...
Click to collapse
It should be LEOIMG.nbh.
dont forget you might want to use MTTY to do task29 to format the device instead of CustomRUU.exe
tbh you can probably use the RUU from HTC if you have HSPL anyway.
p.s. yeah LEOIMG.nbh - LEOING.nbg made me smile - finger-twister
Okay I have tested restoring SPL1.42.0000 on a vendor-id'd phone.
Tried 2 ways of formatting the SD card:
a. formatting the sd card to FAT32 via Diskdrive mode connected to pc
b. Formatted in HD2 using onboard utility in HD2.
Tried 2 images but not the vendor-id image since I do not have that image.
a. Vendor ROM but in different language
b. Stock ROM HTC
Tried 2 ways of changing SPL back to 1.42.0000
a. Reset + vol down shows a 1 second message "Checking.", after that it immediately goes to the blue-green-red bootscreen showing bootloader 1.42.HSPL
b. From bootloader connect USB to pc and flash using stock RUU.
All combinations of above I can not restore SPL. Must be because HD2 requires correct ROM image + correct vendor-id.
Is there possibly a way to remove HSPL in some way without the original vendor image? Goldcard?
Check out my video on reverting back to stock spl
Its in my signature.
Not sure if its the same for locked devices though, just have a look
[★] said:
Check out my video on reverting back to stock spl
Its in my signature.
Not sure if its the same for locked devices though, just have a look
Click to expand...
Click to collapse
very good manual that is. In video manual is exactly the procedure I did. However the vendor-id'd HD2 won't get to the point where the image can be flashed. It gets to the point up to 1:37-1:38 in your video where the word "Checking..." blinks in an instant. After that it returns to bootloader screen.
So no luck yet
htc12345 said:
very good manual that is. In video manual is exactly the procedure I did. However the vendor-id'd HD2 won't get to the point where the image can be flashed. It gets to the point up to 1:37-1:38 in your video where the word "Checking..." blinks in an instant. After that it returns to bootloader screen.
So no luck yet
Click to expand...
Click to collapse
Oh sorry man
Goldcard also tried and no luck.
Every time I reboot to bootloader it gives the colored screen, proceeds to white screen with blue letters, in an instant shows: "Loading..." ..followed by: "Checking..." ..and then returns to colored bootloader main screen.
edit:
I keep thinking whether it is normal or not that the white screen doesn't show any kind of confirmation that it did actually find any nbh file whether it is valid or not. Maybe it just exits when the nbh is not valid, that may be the case.
However I have now ran the routine a whole lot of times and make zero progress.
Maybe better continue the search for the correct ROM to flash with.
just try one of the official roms posted in the official roms thread. don't try 1.61 - only 1.43/48
I have tried all official roms posted including 1.43 and 1.48 and up without success. The bootloader wouldn't go further after having checked the SD card contents. It did not work at all.
Finally now I bricked (I hope temporarily) my HD2 by trying to install the latest official 2.02 from the RUU.
Strange things have happened here.
I had earlier copied an 148 or so nbh to sd card. Bootloader would't work out as explained in posts above. So after all (with card with 148 nbh still inside) I figured it was time to check what ROM 2.02 would do, since I believe it would overwrite all SPL including HSPL since it is a v2 SPL. At least I hoped.
When I opened the RUU, it did reboot the phone as it is supposed to do with RUU.
Few things happened:
a. The phone booted in bootloader and showed me the white step screen which indicated there was a nbh about to be flashed. This was the nbh on the card!
b. The RUU errored with error 260 that the connection was lost. I have never lost a connection, must be because file on sd card took control.
c. Since connection was lost and the phone wanted a flash from the sd card I pressed vol up to continue update. it did start updating... but at about 9% I got a big triangle /exclamation mark, and HD2 stopped updating.
Reboot. Guess what??? SPL 1.42.0000 in bootloader now. From the nbh on the card.
But NO boot, NO radio .... After all I managed to destroy phone and HSPL.
Had to goldcard my way back in. However, problem solved!
I think I made a grave error and updated to the TMO USA 2.02 ROM not knowing it would be watermarked all over the place. So now I'm trying to revert back to HSPL and am having no luck whatsoever. I've read and read and read but can find no clear cut path to downgrade the SPL. I really just want to get back to the WWE 1.66 official release I was running.
Can anybody please help? I've tried flashing all kinds of different ROMS including official roms but nothing works. Even from the memory card is of no help.
I hear gold card mentioned but I have no idea what that is and Google gives billions of results for gold card, nothing that explained it to me. I have to buy a gold card?
Can somebody please help?
Either downgrade my SPL or instruct me on ridding my 2.02 of these water marks. HTC Confidential is printed in the middle.
Thanks.
balane said:
I think I made a grave error and updated to the TMO USA 2.02 ROM not knowing it would be watermarked all over the place. So now I'm trying to revert back to HSPL and am having no luck whatsoever. I've read and read and read but can find no clear cut path to downgrade the SPL. I really just want to get back to the WWE 1.66 official release I was running.
Can anybody please help? I've tried flashing all kinds of different ROMS including official roms but nothing works. Even from the memory card is of no help.
I hear gold card mentioned but I have no idea what that is and Google gives billions of results for gold card, nothing that explained it to me. I have to buy a gold card?
Can somebody please help?
Either downgrade my SPL or instruct me on ridding my 2.02 of these water marks. HTC Confidential is printed in the middle.
Thanks.
Click to expand...
Click to collapse
if you flash a stock 166 rom then you don't need goldcard.. especially with the 200spl in place.
flashing via ssdcard or using just running the full exe from windows should install the 166 complete including the 142 spl.
I know as I've done it a few times over the last couple of days.
the watermarking is nothing to do with the spl btw.. it's the ddi.dll that's the cause.
next time read a bit more before you go around flashing everything, it will save you some heartache, as the 202 rom has been discussed in some detail adn isn't suitable for noobs to use, as you've found out. .
Thanks. I did try flashing down to the official 1.66 rom WWE and neither the exe from the PC nor the leoimg.nbh worked.
Using the SD card method it flashes gray for a second with some red number up top and then returns to the rainbow bootloader screen and sits.
Using the PC method it boots the phone, gets to 1% of the flash, returns some error about communication and goes back into the 2.02
Honestly, if there were a way to remove the water mark I would be just fine with it all. I tried to replace the ddi.dll with the one from 2.01 earlier in the day but it just froze at the Stick Together first splash screen so I don't know what else to try in that regard.
edit -deleted in case I'm wrong (more often than not )
I just got done getting the 1.66 official WWE on there via SSPL. For some reason it won't let me install any custom rom via SSPL saying it loses communication with the phone.
So I'm OK for the time being.
Can somebody please direct me to the location of Gold Card? I'm having a bear of a time finding it.
Thank you very much for your help.
balane,
I feel your pain but as Fards has just said doing a significant amount of research first before jumping in can save hassle later on.
XDA can be a bit hit and miss to search so use this to help you out...http://www.google.com/advanced_search?q=+site:http://forum.xda-developers.com&hl=en&lr=&as_qdr=all
If you search for Gold Card the 3rd or 4th item down is the thread you are looking for.
Good luck, hope you get it sorted.
All the best,
WB
OK, thanks for that. Now that I have some links I'll get to reading.
I'm pretty sure if you get the right official rom for your device, you can place the rom image as leoimg.nbh in your sdcard and it will flash for you including the spl.
had that before so the steps work for me
I would love to know which one. I know for certain that 1.66 did not work via this method. Do you have any suggestions as to which official ROM package to try?
zenkinz said:
I'm pretty sure if you get the right official rom for your device, you can place the rom image as leoimg.nbh in your sdcard and it will flash for you including the spl.
had that before so the steps work for me
Click to expand...
Click to collapse
edit -deleted in case I'm wrong (more often than not )
Re:Goldcards, to make one for the leo you need PSAS, which is not free. see revskills.de
samsamuel said:
I'm pretty sure sd card flashing wont downgrade spl unless the card is gold, only overwrite same version spl
(I.e 1.42.hspl can be overwritten by 1.42.0000 but 2.0 wont be overwritten by 1.42)
Re:Goldcards, to make one for the leo you need PSAS, which is not free. see revskills.de
Click to expand...
Click to collapse
well it does for me... and I don't use goldcard. (unless you consider credit gold card as one)
you must make sure you are using an nbh rom that has spl image obviously, otherwise it won't downgrade (or upgrade) depending on your spl version in the nbh
zenkinz said:
well it does for me... and I don't use goldcard. (unless you consider credit gold card as one)
you must make sure you are using an nbh rom that has spl image obviously, otherwise it won't downgrade (or upgrade) depending on your spl version in the nbh
Click to expand...
Click to collapse
so you have flashed the test t mob rom like the OP? that is the only rom to contain the v2 spl.
zenkinz said:
you must make sure you are using an nbh rom that has spl image obviously, otherwise it won't downgrade (or upgrade) depending on your spl version in the nbh
Click to expand...
Click to collapse
Can you give me an example please?
Is it OK to keep my 1.66 official flashed via SSPL on a phone with SPL-2.0? There is no problem with that, right?
In the future something should transpire that makes this problem easier to work with?
balane said:
Can you give me an example please?
Is it OK to keep my 1.66 official flashed via SSPL on a phone with SPL-2.0? There is no problem with that, right?
In the future something should transpire that makes this problem easier to work with?
Click to expand...
Click to collapse
probably don't help, anyway is your SD fat32 formatted?
if yes or not, you can try to reformat SD and flash from root LEOIMG.nbh extracted from 1.66 official .exe
To restore original SPL:
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
How to take the RUU_signed.nbh file from the official shipped ROM file as most files are in the exe format -> you can extract the .exe using winrar.
Click to expand...
Click to collapse
This procedure worked for me. Restored back SPL 1.42 from HSPL 2.0 (and HTC Reworked)
I used the first official ROM available on htc.com and extracted the RUU_signed.nbh from it. Renamed to leoimg.nbh, put the file on microSD card, restated while holding the volume down + power button and followed on-screen instructions.
cenzor said:
This procedure worked for me. Restored back SPL 1.42 from HSPL 2.0 (and HTC Reworked)
I used the first official ROM available on htc.com and extracted the RUU_signed.nbh from it. Renamed to leoimg.nbh, put the file on microSD card, restated while holding the volume down + power button and followed on-screen instructions.
Click to expand...
Click to collapse
HSPL 2.0 ?? is this out???
and HTC Reworked you mean the italian chef custom rom? the custom rom don't flash spl
STOP TRYING TO USE SSPL for this.
it works ***ONLY*** for flashing the os and splash..
it doesnt flash radio or spl
You may need to format you Sdcard or try another one..
try another 166 rom, the exe (NOT the custom ruu or sspl version) will flash this over the top of 200 spl
the 200 spl is MFGR that means it's not region locked, so you dont need a goldcard to flash it..
pm me if you want a hand
huggy_72 said:
HSPL 2.0 ?? is this out???
and HTC Reworked you mean the italian chef custom rom? the custom rom don't flash spl
Click to expand...
Click to collapse
Maybe not sure about the HSPL version, it was the one from here.
And yes, the HTC Reworked was a custom rom (and very buggy unfortunatelly), with 1Ghz patch and 576 RAM enabled.
Easiest (possibly) method would be to flash HardSPL and then flash the 1.66 ROM from the SD card. HardSPL will accept an SPL if flashed from SD, and HardSPL will overwrite the 2.00 SPL.
edit -deleted in case I'm wrong (more often than not )
I have a very strange problem and if anyone could help me I'd very much appreciate it as I can't find anything similar in the forums (with a solution) after a month of searching.
My HD2 has HardSPL3 and the ChuckyDroid ROM with Android on an SDCard.
The USB connector on the handset has stopped working (the metal D-shape thing wobbles about) so I cannot flash a ROM to it via the ROM Update Utility, only by the LEOIMG.nbh on an SDCard method works.
I need to send the handset back to Vodafone for a warranty repair, but obviously having HSPL3 and a custom WM ROM invalidates my warranty so I need to flash the stock ROM back to the phone to remove them both.
Problem is that I can flash any custom ROM I find to the handset using the SDCard method (Except Energy ROM's for some reason) but when I try to flash the stock Vodafone ROM using this method it fails to start the phones flash routine.
So I'm stuck with a phone I can't charge (using desktop charger for the battery atm) and I can't send back for repair.
Any ideas?????
Thanks in advance!
dont worry too much about the rom, get a close to stock custom rom on there, use hspl2.exe to remove hspl (set it to 1.66.0000) and it should be fine.
samsamuel said:
dont worry too much about the rom, get a close to stock custom rom on there, use hspl2.exe to remove hspl (set it to 1.66.0000) and it should be fine.
Click to expand...
Click to collapse
Is it possible to flash HSPL2 onto it without using the USB cable?
The connector on the handset is totally borked so i can't use the PC for anything, just the SDCard flashing method. :/
**BUMP**
I haven't found a solution still.
no, you cant use any other means to run hspl.
as to why custom roms flash from card and stock dont, you must be doing something wrong. please outline your proceedure.
samsamuel said:
no, you cant use any other means to run hspl.
as to why custom roms flash from card and stock dont, you must be doing something wrong. please outline your proceedure.
Click to expand...
Click to collapse
I downloaded the stock Vodafone ROM from the link in mskip's flashing thread.
Rename the .exe to .zip
Extract the zip
Rename the RUU_Signed.nbh to LEOIMG.nbh and copy it to an SDCard.
insert card into handset and reboot holding the volume down button.
Same procedure I use for flashing custom ROM's.
hmm, very strange, all i can suggest is trying several different stock roms. dont forget to check what your bootloader says for spl, because even a failed stock flash can remove hspl and reset stock spl.
samsamuel said:
hmm, very strange, all i can suggest is trying several different stock roms. dont forget to check what your bootloader says for spl, because even a failed stock flash can remove hspl and reset stock spl.
Click to expand...
Click to collapse
I downloaded the ROM directly from HTC support site but same thing occurs when I try to flash it. HSPL is definitely still on there too.
I find it weird that I can flash any custom ROM except the Energy ROMs, I'm assuming that perhaps these have more in common with stock ROM's than the others.
I'm lost atm!
a long shot, but are you extracting the ruu_signed before copying it to the sd card, or are you drag/dropping it directly to the phone from within winrar/winzip? I've heard of that causing problems with corruption before, though I can't remember the files involved or the context.
try different stock roms, you said its voda, but was it locked voda?
appart from that, thoughts would be, make sure the sd is freshly formatted, full format, not quick format, fat32, get the roms from different sources, maybe even use different browsers to download them, maybe even try the wwe 3.14 rom, even if it flashes the spl and then wont load the rom, you can always plead ignorance with them, it's a stock spl after all. (Course, they may just tell you to do one, so only try that if you are prepared to argue)
samsamuel said:
a long shot, but are you extracting the ruu_signed before copying it to the sd card, or are you drag/dropping it directly to the phone from within winrar/winzip? I've heard of that causing problems with corruption before, though I can't remember the files involved or the context.
Click to expand...
Click to collapse
I've tried it both of those ways, on my Macbook Pro and on another Linux box and from Win2K in a VM.
try different stock roms, you said its voda, but was it locked voda?
Click to expand...
Click to collapse
It's a contract vodafone that came unlocked when it arrived, had it nearly a year now.
appart from that, thoughts would be, make sure the sd is freshly formatted, full format, not quick format, fat32, get the roms from different sources, maybe even use different browsers to download them, maybe even try the wwe 3.14 rom, even if it flashes the spl and then wont load the rom, you can always plead ignorance with them, it's a stock spl after all. (Course, they may just tell you to do one, so only try that if you are prepared to argue)
Click to expand...
Click to collapse
I've tried two different downloads of the ROM (htc.com and the one in mskips thread) and two different sdcards, the 2GB that came with it and a Class 4 Kingston. I'll try formatting both cards using the sdcard.org formatter in Win2K and see if that makes a difference.
My desktop charger has now decided to die on me so I can't try anything until my new one arrives from Hong Kong in a week or so. :/