[KITCHEN][WWE] Leo 2.02 - HD2 Windows Mobile 6.5 ROM Development

Let's share Leo 2.02 EV Kitchen WWE.
It is based on New T-Mobile ROM
RUU_Leo_1_5_TMOUS_2.02.531
MASD_S__Radio_Signed_15.29.50.07
U_2.06.50.04_TeleNav-5.5.42
The folders are already structured the way they should - Tools, mytools, EXT, OEM, etc... Only the SYS file has been removed from the Kiychen to gain space.
The Rom is an Confidential HTC Test rom.
It's a one time boot rom.
Enjoy !
uploading link - available soon

http://www.sendspace.com/file/7xl31i

Steve0007 said:
It's a one time boot rom
Click to expand...
Click to collapse
thanks! I will test this tonight and post some results.
What exactly do you mean with your line above?

pencilcase said:
thanks! I will test this tonight and post some results.
What exactly do you mean with your line above?
Click to expand...
Click to collapse
Look @ some posts from Fards, xmoo and others :
http://forum.xda-developers.com/showthread.php?t=577717&page=21
HTC has included a one time boot in this TEST Rom.
On the good part, It has some nice drivers and packages that could probably be used in custom roms.

Steve0007 said:
Look @ some posts from Fards, xmoo and others :
http://forum.xda-developers.com/showthread.php?t=577717&page=21
HTC has included a one time boot in this TEST Rom.
On the good part, It has some nice drivers and packages that could probably be used in custom roms.
Click to expand...
Click to collapse
is this similiar to the kitchen that kwbr published earlier? because when I open his kitchen, it says ROM version 2.00 (although I subsequently extract official 1.48 WWE Asia ROM, the ROM version stays unchange)

zenkinz said:
is this similiar to the kitchen that kwbr published earlier? because when I open his kitchen, it says ROM version 2.00 (although I subsequently extract official 1.48 WWE Asia ROM, the ROM version stays unchange)
Click to expand...
Click to collapse
No this EV Kitchen is Leo 2.02 - Test and confidential Rom

yes out has some nice things in the 202
however to use the drivers you need the spl from it, quite likely the boot loader, the oemxip and clean out quite a lot of the nasties..
the drivers and xip don't work too well with spl142

This seems to work for me let me know if anyone has anymore issues
ddi.dll - Removes Watermark (Replace with 2.01 in OEM\OEMDrivers)
DDI.Dll
One time boot(Checking again)

sgilesuk said:
This seems to work for me let me know if anyone has anymore issues
ddi.dll - Removes Watermark (Replace with 2.01 in OEM\OEMDrivers)
DDI.Dll
msm_time.dll -Removes one time boot only (Replaced with 2.01 in ROMXipKernal)
MSM_Time.dll
Click to expand...
Click to collapse
Damn good news!!!
Does this have to be coocked, or can it replace the files using the rom.
Can someone cook it with the fix, I want to do some kernell researching using the HTC Debug Tools and Qualcomm Programms

can the 2.00 spl be overwritten with 1.42 by flashing a stock rom with spl included?

Johnston411 said:
can the 2.00 spl be overwritten with 1.42 by flashing a stock rom with spl included?
Click to expand...
Click to collapse
If you flash trough SD card, it will change to stock 2.0 SPL.
But bepe will come with a 2.0 HSPL...
So or wait, or try

xmoo said:
If you flash trough SD card, it will change to stock 2.0 SPL.
But bepe will come with a 2.0 HSPL...
So or wait, or try
Click to expand...
Click to collapse
You can flash back full stock Rom to get 1.42 SPL back
Or use my kitchen and cook 1.42 SPL in 2.02, you can also include the files to avoid the "one boot time" thing

Johnston411 said:
can the 2.00 spl be overwritten with 1.42 by flashing a stock rom with spl included?
Click to expand...
Click to collapse
yes
quite happily, I've run the stock exe installer to do it a few times now..
xmoo I've got several roms built with it. but none with the debug tools in them so not what you want..

fards said:
yes
quite happily, I've run the stock exe installer to do it a few times now..
xmoo I've got several roms built with it. but none with the debug tools in them so not what you want..
Click to expand...
Click to collapse
Could you coock one with the debug tools and qualcomm tools in it?
I dropped the files, and some of them work and some of them don't.
I tried the old HTC debug tools, but it did not have everything what the hd2 debug tools have in it. For example TV out settings.
fard do I got you on msn?

cheers xmoo
so you can get back to 1.42 via sd flash?
(just double checking as im not sure if you meant getting spl 2.00 or getting back)
edit: ignore that just read the other posts. cheers all

Johnston411 said:
cheers xmoo
so you can get back to 1.42 via sd flash?
(just double checking as im not sure if you meant getting spl 2.00 or getting back)
Click to expand...
Click to collapse
No HSPL has to be flashed using the tool.
Going back to stock SPL, you have to flash a stock rom using SD card.
Cause the stock roms also flash ur SPL + Radio, the stock rom don't.

im uploading my rom to rapidshare now, so you can use that, it has the debug tools and most tmobile stuff gone

sgilesuk said:
im uploading my rom to rapidshare now, so you can use that, it has the debug tools and most tmobile stuff gone
Click to expand...
Click to collapse
I'm also busy with the kitchen.
Does someone know how to enable Internet sharing in ROM?
Also for usb to pop-up.
Where to find the sys btw.
I'm new in the rom coocking thing.

rom wasnt working.
2.02 Debug ROM no one time boot

xmoo said:
fard do I got you on msn?
Click to expand...
Click to collapse
along time ago..
just added you

Related

Hotfix to enhance the security mechanism of Bluetooth service for HTC Touch HD

Hotfix to enhance the security mechanism of Bluetooth service for HTC Touch HD
This hotfix can enhance the security mechanisms of the Bluetooth service.
http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=0&dl_id=609
Have fun~
thanks, very good post!
do you know by chance what are the enhancements exactly?
http://www.1800pocketpc.com/2009/07/15/htc-wm6-1-and-wm6-bluetooth-vulnerability.html
http://www.seguridadmobile.com/wind...ile-OBEX-FTP-Service-Directory-Traversal.html
Installs the following.
Code:
obexfile.dll
btpropext.dll
btfsd.dll
BTDisk.dll
btctxmenu.dll
btrenamedir.exe
felvop.exe
BTFtpClient.exe
btdwake.exe
CheckFile.exe
__cusTSKTEMP.exe
Looks like some checking mechanism for the executable files received.
Hope it doesn't make the already incompatible bt stack more incompatible with other mobiles (read nokia, samsung etc).
Anyone installed this on Dutty roms??
onesolo said:
Anyone installed this on Dutty roms??
Click to expand...
Click to collapse
Can't be installed on Miri's WM6.5.
maati said:
Can't be installed on Miri's WM6.5.
Click to expand...
Click to collapse
Which version have you tested it on?
V23, the newest one. Maybe it's because of WM6.5 or cooked ROMs in general?
@moa9:
thanks my friend! i am used to google these things, but i think my brain stopped working after 12:00 am!
onesolo said:
Anyone installed this on Dutty roms??
Click to expand...
Click to collapse
I did on 3.9. No problems so far.
i tried to install on my HD with original 6.1. WM ROM but it says that it is not for my device?
any ideeas?
Yeah same here on my 1.56 ROM, it's not installing.
faw+ said:
Yeah same here on my 1.56 ROM, it's not installing.
Click to expand...
Click to collapse
same here on stock NLD 1.56
Yup same here, using latest stock ROM, no worky for me. Guess that's already been silently fixed ?
I'm getting the same on my stock ROM. Still waiting for HTC to get back to me for reasons why and possible solutions.
I've just had confirmation from HTC that those using the latest official stock ROM already have the hotfix installed as part of the ROM upgrade.
Can somebody maKe a cab please?
or a folder with all file inside?
Solved!
http://forum.xda-developers.com/showpost.php?p=4195945&postcount=5
All credits for Shark147

the cleanest ROM without HTC customizations

I would like to have your opinion: which cooked ROM is the cleanest and lightest ROM without all those "slowing" HTC customizations?
Or if this is not possible, which ROM has the least f those HTC embedded apps?
My ideal ROM is that one which has succesfull get rid of Manila, HTC messaging and all the other staff, except one: Compass.
At the moment I am satisfied with Freyberry Barebone: but up to now I cannot get rid of HTC Contacts, (I cannot re-enable the default MS Outlook Contact)
Thanks and waiting
Saulo
I understand that some of HTC customizations cannot be removed, but I wish to find a ROM which has the least of them.
Thanks and waiting.
Saulo
You can make it easily if u want Microsoft Phone (WM) OS only for ur device. But ur device will become weird. High tech mobile hardware with errrr looking
I'm finally not alone in this quest !
http://forum.xda-developers.com/showthread.php?t=630301
saulo866 said:
I would like to have your opinion: which cooked ROM is the cleanest and lightest ROM without all those "slowing" HTC customizations?
Or if this is not possible, which ROM has the least f those HTC embedded apps?
My ideal ROM is that one which has succesfull get rid of Manila, HTC messaging and all the other staff, except one: Compass.
At the moment I am satisfied with Freyberry Barebone: but up to now I cannot get rid of HTC Contacts, (I cannot re-enable the default MS Outlook Contact)
Thanks and waiting
Saulo
Click to expand...
Click to collapse
I made one
I dont know if you'll like it.
http://u.115.com/file/f914f73751
ruu_signed.rar
It only 70M hehe
zd_lc said:
I made one
I dont know if you'll like it.
http://u.115.com/file/f914f73751
ruu_signed.rar
It only 70M hehe
Click to expand...
Click to collapse
Thanks !
Can you make a thread with screenshots, specs, things removed... All we have to know about it !
WTF ?
Piece of **** ?
Did you tested your crap ?
Just flashed, get stucked on white boot screen for minutes... nothing happens !
Trying to reflash (LEOMIG.nbh) with a WORKING and KNOWN rom, same result, nothing and stucked on boot image, no radio/rom in red on the left bottom part... **** !
Needed to reflash with shipped official HTC rom... Everything's fine now, but wasted 1 hour
Had to set HardSPL once again
luminouche said:
WTF ?
Piece of **** ?
Did you tested your crap ?
Just flashed, get stucked on white boot screen for minutes... nothing happens !
Trying to reflash (LEOMIG.nbh) with a WORKING and KNOWN rom, same result, nothing and stucked on boot image, no radio/rom in red on the left bottom part... **** !
Needed to reflash with shipped official HTC rom... Everything's fine now, but wasted 1 hour
Had to set HardSPL once again
Click to expand...
Click to collapse
I use this rom for week
I dont know what wrong with you
Did you Flash this ROM by LeoCustomRUU.exe
??
If you will,Try this one.
http://u.115.com/file/f9c1a5f9b4
FmFlashLight.rar
With The Pic below
So you can see it run
By the way. It need a 2.07 Radio
The Compass need Manila
So I cant do it...
Can anyone help me ?
I used Leo_RADIO_15.30.50.07U_2.06.51.07 when i flashed...
Please post required config to flash your rom, to avoid problems...
2.07 and 2.08 are OK ? Or only 2.07 ?
Please also give us informations about removed apps, built version...
zd_lc said:
The Compass need Manila
So I cant do it...
Can anyone help me ?
Click to expand...
Click to collapse
Done
@
http://forum.xda-developers.com/showthread.php?t=624256
I'll try it....
you looked at the miri xtra light roms?
They are pretty stripped back.
tonycosta said:
you looked at the miri xtra light roms?
They are pretty stripped back.
Click to expand...
Click to collapse
I see But is a little huge to me.
His rom is My first ROM. He is a great man.
I think I would contribute to this thread.
If I knew what the hell they were talking about!

Success!! But wait...

Hey folks!
Just want to say thanks to everyone who put up some of the great FAQs and guides on here.
I'm successfully running Android on my HTC HD2 (TMOUS) w/ 1024Flash.
However, I am in need of some guidance.
I'm using the HD2Froyo_v2.1 build.
I have also successfully installed HardSPL.
I made a test call, and the person on the other end sounded like a tiny robot.
I read about this in the forum guides, but I'm not sure what exactly I should do.
Can anyone offer some advice/guidance?
I believe I need to install a custom Radio, but I'm not sure which one.
Also, are there any other issues I should expect or anticipate?
Will I be okay to continue using the Android OS from now on if I like it?
Thanks!!
Try changing your WM. For my I'm using
http://forum.xda-developers.com/showthread.php?t=776971
Its a barebones for using Android.
Also if you want a different Android try
http://forum.xda-developers.com/showthread.php?t=791835
Its FAST and really really RESPONSIVE
nova hands said:
Hey folks!
Just want to say thanks to everyone who put up some of the great FAQs and guides on here.
I'm successfully running Android on my HTC HD2 (TMOUS) w/ 1024Flash.
However, I am in need of some guidance.
I'm using the HD2Froyo_v2.1 build.
I have also successfully installed HardSPL.
I made a test call, and the person on the other end sounded like a tiny robot.
I read about this in the forum guides, but I'm not sure what exactly I should do.
Can anyone offer some advice/guidance?
I believe I need to install a custom Radio, but I'm not sure which one.
Also, are there any other issues I should expect or anticipate?
Will I be okay to continue using the Android OS from now on if I like it?
Thanks!!
Click to expand...
Click to collapse
You need to change your radio.
blacksxe said:
Try changing your WM. For my I'm using
http://forum.xda-developers.com/showthread.php?t=776971
Its a barebones for using Android.
Also if you want a different Android try
http://forum.xda-developers.com/showthread.php?t=791835
Its FAST and really really RESPONSIVE
Click to expand...
Click to collapse
I am running the same combi and i am really happy!
I have tried like so many combinations....BTW, do you know how to show
the correct battery level on the vbn reloaded winmo rom ? Due to its low
current draw, i would like to run it as main OS
z
Okay, so if I install that first one you gave me, I shouldn't have any call issues?
The build of Android I'm using seems to be running great, except for calls.
So here are my questions:
I need to install this VBNROM, correct?
Does this affect the Radio? My Android was running fine, but wasn't processing calls.
Will this VBNROM take care of this issue?
Also, how do I get back to Android after a reboot.
I'm currently back in Windows Mobile, but don't know how to get back to my Android install.
Thanks for the help, guys!
Change your radio
bigvandal said:
Change your radio
Click to expand...
Click to collapse
I'll try that first.
Any recommendations?
Try changing your radio. Search this as I am not allowed to post threads:
HTC HD2 Radio ROM Thread
Im pretty sure that you shouldn't flash to a .51 radio (grab the .50 ones) as they brick your TMOUS HD2.
If that doesn't fix the issue then you have to change your WM rom. Try Chucky's rom I found that got rid of the robot voice for me.
Post up if you have any questions.
krum55 said:
Try changing your radio. Search this as I am not allowed to post threads:
HTC HD2 Radio ROM Thread
Im pretty sure that you shouldn't flash to a .51 radio (grab the .50 ones) as they brick your TMOUS HD2.
If that doesn't fix the issue then you have to change your WM rom. Try Chucky's rom I found that got rid of the robot voice for me.
Post up if you have any questions.
Click to expand...
Click to collapse
Thanks.
If you can email me the link, my email is kms311 AT hotmail DOT com
I want to make sure I have the right thread.
try the 2.12.50.02_2, I am using that and it works perfect.
Also try putting music on your phone if you notice that it is playing faster than normal then change your WM rom.
Also, can someone tell me how to get back into Android?
I'm back in WinMobile, and I ran haret again. But now it just reboots to WinMobile each time.
Once android is loaded you won't have to do anything except get some cool new apps like angry birds (which is free and AWESOME). Also to boot up android, open the CRLCAD.exe then Haret.exe then it should boot. Not sure if i spelt it correctly but i hope you understand what i meant.
As I said before changing you WM rom may also help the robot voice. I would recommend Chucky's rom as it has a bootloader, so when WM loads there will be a black and white robot you press and it will boot up Android, better then opening both exe files.
To flash a radio go to the forum i sent you, then go to the installing section
to install as said you need HardSPL, and then download the radio rar file, and also download the CustomRUU file. After they have finished downloading Rename and extract the radio rar file make sure the name says: RUU_Signed.nbh and then open up the CustomRUU.exe and it should load it on to your HD2.
Here is what they wrote:
Installing:
For installing a RADIO ROM you need HardSPL installed to your device.
Rename the extracted file to "RUU_Signed.nbh" and flash with the CustomRUU: it won't hardreset your device.
Okay. I think I follow.
So I'll load a Custom ROM, like Chucky's, using CustomRUU and renaming the file.
Then I'll load the 2.12.50.02.2 Radio, and I should be set.
Have I got that right?
Try flashing a radio first and see if it works. If you still have robo-voice which i doubt then you can load Chucky's Rom.
krum55 said:
Try flashing a radio first and see if it works. If you still have robo-voice which i doubt then you can load Chucky's Rom.
Click to expand...
Click to collapse
Trying that now.
I'll post results.
Well, I installed the new Radio, but I'm still getting the robotic, poor audio quality on calls.
I can't understand what the person on the other end is saying.
Should I now try a custom ROM?
nova hands said:
Well, I installed the new Radio, but I'm still getting the robotic, poor audio quality on calls.
I can't understand what the person on the other end is saying.
Should I now try a custom ROM?[/QUOTE
Yeh try Chucky's Rom, its the same procedure but it will take 5-10 mins longer.
Click to expand...
Click to collapse
nova hands said:
Well, I installed the new Radio, but I'm still getting the robotic, poor audio quality on calls.
I can't understand what the person on the other end is saying.
Should I now try a custom ROM?
Click to expand...
Click to collapse
i would take the suggestion from the first reply by blacksxe, which is the VBNRom.. and install the radio recommendation version that was posted at the VBNRom page as well (2.15)... also, expect that you will boot to winmo each and everytime that you restart your phone.. as of now, there is no nand support that's available for users.. only the devs has it and it's still under development.. so just use the EBL program that's included on the VBNRom and set it to autoboot (6 seconds or even 10).. that way you won't have to run haret manually each and everytime you restart..

is it safe to flash cocked rom after wp7 using?

i like to flash my tmobile hd2 with wp7,its now with miri rom,is it safe,cause i dont wont to brick it,and after flashing it with wp7 can i reflash it with cocked rom or stock rom?
thank you all
I was using a cooked rom and flashed magdlr and wp7 with no problems... then flashed back from magldr/wp7 to a cooked rom
BUT that was my experience I can promise nothing! The one problem I encountered was the Radio I was using before no longer worked with android... Can't figure out why....
thank u,what radio u are using now?what about sd?did u format it again successfully
abufaris said:
thank u,what radio u are using now?what about sd?did u format it again successfully
Click to expand...
Click to collapse
I used another android phone to format the SD card, but other have used 3rd party software to do it. Search the forum and you will find what...
Sorry, I didn't try any other Radios, I just flashed back to see if I could.
I'm back on WP7 now lol
i will try now,thank u
Thread name is epic... *to flash *COCKED* rom*
ffs, Stop flashing you ***** guys!!!
TheATHEiST said:
ffs, Stop flashing you ***** guys!!!
Click to expand...
Click to collapse
someone has a fetish with *****!!! lmaooooooooo
it is safe to flash a cocked rom as long as you wear a condom

Rebooting into Windows Mobile

Hi
I followed this tutorial to installing Android on an SD card. This worked well for the first time.
I used a 4GB SD card, and my radio is 2.8.000. Though what happens is when I load it, the 'loader' launches fine, though then reboots the device into Windows Mobile. I am not sure if this has anything to do with the Windows Mobile ROM being custom or not.
NOTE - I am a noob to custom roms ect, therefor I thought it would be a good idea to post the tutorial source. I'm also sorry if I did not include enough information.
If anyone has had this problem or knows a solution, all help would be appreciated.
Thanks.
Francis
Frant123 said:
Hi
I followed this tutorial to installing Android on an SD card. This worked well for the first time.
I used a 4GB SD card, and my radio is 2.8.000. Though what happens is when I load it, the 'loader' launches fine, though then reboots the device into Windows Mobile. I am not sure if this has anything to do with the Windows Mobile ROM being custom or not.
NOTE - I am a noob to custom roms ect, therefor I thought it would be a good idea to post the tutorial source. I'm also sorry if I did not include enough information.
If anyone has had this problem or knows a solution, all help would be appreciated.
Thanks.
Francis
Click to expand...
Click to collapse
It's been a while since I used my HD2 but do you have H-SPL Installed? And what ROM are u trying to boot?
Edit: also if I remember correctly u need to update your radio. Go to HD2 SD development then the sticky post all the info is there my man.
Sent from my HTC EVO 3D X515m using XDA App
Bebida said:
It's been a while since I used my HD2 but do you have H-SPL Installed? And what ROM are u trying to boot?
Edit: also if I remember correctly u need to update your radio. Go to HD2 SD development then the sticky post all the info is there my man.
Sent from my HTC EVO 3D X515m using XDA App
Click to expand...
Click to collapse
HSPL won't affect SD Android and (if I'm not mistaken) he has a .50 radio which is fine for booting Android... unless he got the SPL/HSPL version and the radio version confused, which is likely as radio 2.8.000 doesn't exist, I think he meant HSPL 2.08. In this case OP, flash a newer radio with .50 (see this thread)
Nigeldg said:
HSPL won't affect SD Android and (if I'm not mistaken) he has a .50 radio which is fine for booting Android... unless he got the SPL/HSPL version and the radio version confused, which is likely as radio 2.8.000 doesn't exist, I think he meant HSPL 2.08. In this case OP, flash a newer radio with .50 (see this thread)
Click to expand...
Click to collapse
So is HSPL Just needed to update the radio?
Sent from my HTC EVO 3D X515m using XDA App
Bebida said:
So is HSPL Just needed to update the radio?
Sent from my HTC EVO 3D X515m using XDA App
Click to expand...
Click to collapse
Basically yeah, and to flash Cutsom ROMs. It is of course needed for everything to do with NAND Android as well, but as far as I know SPL version doesn't affect SD Android, only the radio does. When I used SD Android I just skipped the whole HSPL/Radio things and just flashed the latest stock ROM 3.14 which gave me the latest radio, then ran Android
Nigeldg said:
HSPL won't affect SD Android and (if I'm not mistaken) he has a .50 radio which is fine for booting Android... unless he got the SPL/HSPL version and the radio version confused, which is likely as radio 2.8.000 doesn't exist, I think he meant HSPL 2.08. In this case OP, flash a newer radio with .50 (see this thread)
Click to expand...
Click to collapse
I've tried something like this before. Though I had issues with it not picking it up. It would just hang at 0%. I'm not sure if this was because I was doing something wrong or not. Do you know how to resolve this issue? I used ActiveSync and Windows Mobile Device Center on different machines.
Thanks.
Francis.
Frant123 said:
I've tried something like this before. Though I had issues with it not picking it up. It would just hang at 0%. I'm not sure if this was because I was doing something wrong or not. Do you know how to resolve this issue? I used ActiveSync and Windows Mobile Device Center on different machines.
Thanks.
Francis.
Click to expand...
Click to collapse
I put mine phone into bootloader it then picked it up give that try.
Sent from my HTC EVO 3D X515m using XDA App
I've tryed both starting it in Windows Mobile and in 'Recovery mode' (pressing volume up button along with the power button) All it does is hangs at 0%.
Frant123 said:
I've tryed both starting it in Windows Mobile and in 'Recovery mode' (pressing volume up button along with the power button) All it does is hangs at 0%.
Click to expand...
Click to collapse
What radio are u running? How much free space u got on ur SD?
Sent from my HTC EVO 3D X515m using XDA App
This guide is a must
Bebida said:
What radio are u running? How much free space u got on ur SD?
Sent from my HTC EVO 3D X515m using XDA App
This guide is a must
Click to expand...
Click to collapse
I'm using a 4GB memory card. I'm using a custom ROM, in my case CleanEX DsE Core V3.5 WWE. I do not know how to remove this because it came with the device. Could this be the reason for the rebooting back into Windows Mobile?
The radio version is SPL-2.08.0000
Thanks.
Francis
Frant123 said:
I'm using a 4GB memory card. I'm using a custom ROM, in my case CleanEX DsE Core V3.5 WWE. I do not know how to remove this because it came with the device. Could this be the reason for the rebooting back into Windows Mobile?
The radio version is SPL-2.08.0000
Thanks.
Francis
Click to expand...
Click to collapse
You're becoming very confused. SPL 2.08 is not the radio version, it is the SPL version. You should have HSPL 2.08 and Radio 2.15 is recommended. You can check radio version in WinMo by going to settings>software information>radio (if I'm not mistaken at least, it's been ages since I used WinMo) and your radio should be 2.xx.50.xx (in other words, 2.08 or above). If it isn't, see this guide for all the info you need
Nigeldg said:
You're becoming very confused. SPL 2.08 is not the radio version, it is the SPL version. You should have HSPL 2.08 and Radio 2.15 is recommended. You can check radio version in WinMo by going to settings>software information>radio (if I'm not mistaken at least, it's been ages since I used WinMo) and your radio should be 2.xx.50.xx (in other words, 2.08 or above). If it isn't, see this guide for all the info you need
Click to expand...
Click to collapse
+1 you beat me to it.
Sent from my HTC EVO 3D X515m using XDA App
Nigeldg said:
You're becoming very confused. SPL 2.08 is not the radio version, it is the SPL version. You should have HSPL 2.08 and Radio 2.15 is recommended. You can check radio version in WinMo by going to settings>software information>radio (if I'm not mistaken at least, it's been ages since I used WinMo) and your radio should be 2.xx.50.xx (in other words, 2.08 or above). If it isn't, see this guide for all the info you need
Click to expand...
Click to collapse
Oh, sorry. Yes, I was very confused.
In that case, my radio version is 2.10.50.08_2
So this shows that I need to update the Radio version?
Frant123 said:
Oh, sorry. Yes, I was very confused.
In that case, my radio version is 2.10.50.08_2
So this shows that I need to update the Radio version?
Click to expand...
Click to collapse
Could be the issue if u check the thread nigeldg posted that will show you what to do.
Sent from my HTC EVO 3D X515m using XDA App
Frant123 said:
Oh, sorry. Yes, I was very confused.
In that case, my radio version is 2.10.50.08_2
So this shows that I need to update the Radio version?
Click to expand...
Click to collapse
No, in that case this radio is perfectly fine. Have you tried a full format of your SD card to FAT32 format? This often helps.
Nigeldg said:
No, in that case this radio is perfectly fine. Have you tried a full format of your SD card to FAT32 format? This often helps.
Click to expand...
Click to collapse
I've tryed this multiple times, though it has not helped. I have even tryed using a program for SD cards. I have a feeling it is something to do with the custom ROM in Windows Mobile, though I cannot restore it due to having problems with CustomRUU.
Is their any equivalent to CustomRUU? Or a way to get round the problem?
Frant123 said:
I've tryed this multiple times, though it has not helped. I have even tryed using a program for SD cards. I have a feeling it is something to do with the custom ROM in Windows Mobile, though I cannot restore it due to having problems with CustomRUU.
Is their any equivalent to CustomRUU? Or a way to get round the problem?
Click to expand...
Click to collapse
OK I know this may seem patronising, but the Android files are in a folder named 'Andriod' with a startup.txt with rel_path='Android' right?
Nigeldg said:
OK I know this may seem patronising, but the Android files are in a folder named 'Andriod' with a startup.txt with rel_path='Android' right?
Click to expand...
Click to collapse
Yup, the startup file contains
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline ""
boot
I think it may be a problem with the Android version or something.
Is there another Android SD card version here? I don't mind if it has HTC Sence or not.
I've just tried 2 different versions of Android (for SD cards) and it did the same thing. Though with one of them it worked the first time, though when I restarted it, it would not work after that.
Something wrong with the HD2?
Frant123 said:
Yup, the startup file contains
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline ""
boot
I think it may be a problem with the Android version or something.
Is there another Android SD card version here? I don't mind if it has HTC Sence or not.
Click to expand...
Click to collapse
Startup.txt should have:
set cmdline "rel_path=Android nand_boot=0"

Categories

Resources