Database Users

universal dead?? HELP red light!!!!

Hello, earlier today i felt the device was very warm, i tried to switch it on but it dint respond, even to a reset. when i plugged it into the wall charger all i get is the right hand LED glowing red.
HELP!!!!!!!!!!! how do i hard reset it or get it to work again!!!!!!
i would call in orange care, but im out of the country and i really need the pda functionality!!!!

Unlucky. The 'red' light on most HTC devices indicates a serious power problem, usually it means that the battery is dead (as opposed to simply having run out of charge) or very close to death. You can probably get it working again with a new battery, if the incident hasn't damaged any other components.

i had this with my JJ after I accidently let the battery run down, I plugged it in and led went red and unit would not power on, left it plugged in started scanning the manual and web about a red led, 30 mins later, JJ just switched on and all fine.
It's worth a go and ive not had problem since

i dont think that was the case...
i have a feeling it might have been a short or something, because the unit was SERIOUSLY hot.....
nothing i did worked....until............
final time before giving up, the light was still red etc.
i figured what the heck, either way its dead and im going to get a replacement.
i then gave it fairly hard thump
the red light disappeared. i thought to myself, oh crap, i've really killed it.
then i reset it............. IT BOOTED UP!!!!!!!!!!!!!!!
and all my info still intact......brilliant.....im still going to try and get a replacement when i get back, but thank goodness.
and here i was thinking the last computer to respond to physical violence was the old 486'es hehehehehe

afhstingray said:
and here i was thinking the last computer to respond to physical violence was the old 486'es hehehehehe
Click to expand...
Click to collapse
Actually, it's called percussive maintenance, "the fine art of whacking a machine till it works"

hehe, i'm an IT technician and it's the first thing i try, especially with Printers.....
They don't teach you that on MSCA courses.....

I would recommend not using the machine too much until you can get a replacement battery if I were you. Lithium batteries will get very very hot (in some cases expand and ignite) if they are dis-charged too far. Most equipment which uses lithium technologies will have a voltage cut-off on the power input. As each cell is a nominal 3.3V-3.6V, this is often at around 3V in order to not discharge the battery too far. I would have hoped that this was a HARDWARE function rather than software. However with what you have described, if the voltage cutout was somehow disabled, then this could explain the problems.
Of the units that I have seen in the past like this, the red LED would describe the battery voltage being too low to safely power the unit (i.e. battery be dead). Generally a couple of minutes charge will bring it up to a safe working value. However, after 30 minutes this certainly should have been enough. On one of my motorola units, the battery has expanded a couple of millimeters as it starts to dissociate. It may be worth you checking to see whether the battery in your universal has distorted in any way.

Hmm the red light comes on mine all the time.
It just means the battery is low and the unit is charging. .
It should turn green when the battery is at or near optimum charge.

no....thats not the red, charging is orangy when i say red i mean PROPER red. battery is not distorted, and to the best of my knowledge the unit had a good charge, im pretty sure it must have been some kind of hardware short, and am going to call orange as soon as im back in the country.
dosent explain though why when i whacked it it started working again. the whack instantly made the light go out :wink:
i did a battery rundown test as soon as i got the unit, and posted the results on the forum, if the cut off was not working, i would have ended up with a red light then.
i dont have the manual with me now, but is there any documentation on the red light?

Found this site which had an online manual:
http://www.rich-michael.com/pdf/User Manuals/050802_Universal_Generic_Manual_English_CDL.pdf
What does the phone say in the Power Tab?
A really useful extract:
13 Notification LED Bi-color LED on the right side: Green and Orange
for GSM/WCDMA standby, SMS message, GSM/
WCDMA network status, notification, battery charging
status.
Bi-color LED on the left side: Blue andGreen for
Bluetooth system notification of powered-up and
ready to transmit radio frequency signal, and Wi-Fi
status.
Couldn't find anything else on the LEDs

Found this site which had an online manual:
http://www.rich-michael.com/pdf/User Manuals/050802_Universal_Generic_Manual_English_CDL.pdf
What does the phone say in the Power Tab?
A really useful extract:
13 Notification LED Bi-color LED on the right side: Green and Orange
for GSM/WCDMA standby, SMS message, GSM/
WCDMA network status, notification, battery charging
status.
Bi-color LED on the left side: Blue andGreen for
Bluetooth system notification of powered-up and
ready to transmit radio frequency signal, and Wi-Fi
status.
Couldn't find anything else on the LEDs

Sorry to drag up this old post.
My friend dropped my phone (Orange SPV C500) a few days ago on to a tiled floor. The phone didn't appear to be broken or faulty at all at the time. I even managed to use TomTom navigator to go to the airport, but for some reason when I looked at it before I went to sleep, the phone was off. I assumed the battery had gone (even though it should have lasted at least another day). I tried to plug in the mains charger, but the LED showed a red light. I left it plugged in while I slept, but it was the same in the morning. The phone won't power on at all. I've read that this normally happens on a flat battery, but I am pretty sure it still had juice for another day.
I brought a new battery, but to no avail, the phone still shows the red light when plugged into the mains. No light at all when plugged via USB to my computer. The phone won't power on at all.
It must have broke something when it was dropped. But I'm confused as to why it took a few hours to take any effect.
I also notice that even without the battery in the phone, the LED will still light up as red when plugged in to the mains.
I've tried whacking the phone now, but nothing. Anyone have any idea whether it can be fixed?

JOEJOETHEJOEY said:
Sorry to drag up this old post.
My friend dropped my phone (Orange SPV C500) a few days ago on to a tiled floor. The phone didn't appear to be broken or faulty at all at the time. I even managed to use TomTom navigator to go to the airport, but for some reason when I looked at it before I went to sleep, the phone was off. I assumed the battery had gone (even though it should have lasted at least another day). I tried to plug in the mains charger, but the LED showed a red light. I left it plugged in while I slept, but it was the same in the morning. The phone won't power on at all. I've read that this normally happens on a flat battery, but I am pretty sure it still had juice for another day.
I brought a new battery, but to no avail, the phone still shows the red light when plugged into the mains. No light at all when plugged via USB to my computer. The phone won't power on at all.
It must have broke something when it was dropped. But I'm confused as to why it took a few hours to take any effect.
I also notice that even without the battery in the phone, the LED will still light up as red when plugged in to the mains.
I've tried whacking the phone now, but nothing. Anyone have any idea whether it can be fixed?
Click to expand...
Click to collapse
this is damn scary! Every day more people add on to the "my univ's gone dead after a small drop" community :?
When my univ was brand new, a friend of mine dropped it from a coffee bar table 3 feet high, and i still heave a sigh! Cant believe nothing happened...!
But one thing i guess we all know, its a "drop" away to kiss our device good bye :roll:
hope you get it back up and running m8! look around the forums, there are lots of breakdown-solutions threads...
cheers,
San

nice work afhstingray
do you think it was a baterry problem.
i have often used my battery till tit just ran out, from what i read in the post it seems to be a bad practice. anyway to turn off the phone

i doubt it was a battery problem as i've been using it until now without problems. (i didnt get a replacement as soon as i got back cos im waiting for this unit to get a bit scruffy before i get it replaced)
i had this once on my c500 as well, but taking out the battery for an hour did the trick. so i dont think the problem is related.
i've dropped my universal quite a few times already and im happy to say other than a few annoying dings on the metal plate with the orange logo, its working fine. and 2 of the drops were pretty bad ones too, i thought for sure the screen would die or crack. guess i got lucky and it hit the floor at an angle not too critical

total stab in the dark but maybe a broken connection on charging circuit? that could be why phone was ok then battery died and its now unable to charge?

ViaraiX said:
total stab in the dark but maybe a broken connection on charging circuit? that could be why phone was ok then battery died and its now unable to charge?
Click to expand...
Click to collapse
wouldnt it have worked if it was plugged into the AC then?

Well my Exec was dropped onto concrete at the petrol station whilst I was trying to sort out TomTom and fill up my Yamaha R6 bike at the same time :roll:
No problems, just a couple of case marks.
I guess multitasking should be left to the ladies and computers :lol:

steverae said:
hehe, i'm an IT technician and it's the first thing i try, especially with Printers.....
They don't teach you that on MSCA courses.....
Click to expand...
Click to collapse
Also explains why Servers are built so solidly.
When you are trying to recover a server at 2am in the morning they need to stand up to all but a sledgehammer :twisted:

Athena dead or dying........any miracle workers out there?

Background:
I have had MANY PPC's (so many I can't even count them) and I've loaded many different cooked ROMS and such on most of them so I'm not a complete noob on these things (don't claim to be an expert either).
However, my most recent acquisition is an HTC Advantage bought at CompUSA. I've read most of these came with a test ROM and mine was no different except for the fact that when I attempted to update the ROM to the "official" one provided to me by HTC it would not work. I always got the error "Connection lost" about half way through the process. I tried it numerous times and it never worked. On some occasions it would get stuck on the bootloader screen but I was able to get it back to working status (still on the test ROM).
I decided to try installing step 1 of Ollipro's SPL to see if that would help loading the HTC ROM. Turns out that wouldn't work either. It would get stuck at step 1 where it would ask if "PPC gone idle and didn't work or to wait 30 seconds". Tried it many times and would try to get it to keep going but the grey box on the bottom left would say the "parameters were incorrect" and would give me the option to quit, which I would. No problem, at least my 7501 was still working.
After that I tried the official HTC ROM again and I got the same "connection lost" error I had previously, except this time I didn't get anything on my PPC screen, just a black screen, not even the battery charging light behind the joystick lights up anymore. Soft reset...........nothing. Bootloader reset....................nothing. Hard reset.......................nothing. No lights, nada. The only flicker I get is if I try a reset wheen the power cord is connected. A red light flickers behind the joystick whenever I click the reset button. Any ideas or any help?

Sounds to me like the battery is just dead. I bought one at CompUSA (had the test ROM also) and I got the red ring around the joystick too when I tried to turn it on in the store. I left it plugged in awhile and it finally booted up okay. I then replaced the test ROM with the one and only available for the X7501 on HTC USA's web site. Good luck and I hope you get it working!

I think it could be battery related as well but it had a full charge when this happened. For some reason the unit has lost communication with the battery. I'm at a loss.

I got the same problem like you man !!! but i bad luck and so stupid man , i did with HTC X7501 then it dead after that i bought the X7500 then did it again , holy "... " it dead again....man ...So how your phone now bro ????

I left out the battery a half day and tried it again but still dead. Then I left it charging overnight and tried it again but still dead.
I can't believe this. I've never had a bricked device that can't be revived but after so many have seen this post and still no solutions I'm guessing it's no hope.

I met the same situation when I started to unlock Athena ( TMobile Ameo) within not fully charged battery ( less then 70%).
Solution ( try to make BL mode) with connected wallsocket charger ( not connected to PC USB slot) or find 100% charged battery. It helped me two times.
After many tries it changed to BL mode .
Now I didn't start unlock/change ROM without 100% charged battery.

I have the same BIG Problem, only red fliker when soft reset when AC conected. I wanted to update rom from russian to english and phone stoped working (black screen), and battery heats when inserted in phone . nothing to do? i read everything but i have not got any solution. I think it may be bios dead. helap us please

Lobstrick said:
I have the same BIG Problem, only red fliker when soft reset when AC conected. I wanted to update rom from russian to english and phone stoped working (black screen), and battery heats when inserted in phone . nothing to do? i read everything but i have not got any solution. I think it may be bios dead. helap us please
Click to expand...
Click to collapse
"heating battery" (i.e. discharging when inserted, you mean?), no charge led = dead bootloader indeed.

I get the same problem. My device is work, but not charge. Also like yours i have red ring around the joystick when the battery is taked out. And if battery inside, when i make a softreset it blink one time, continued to load but not charge.
You`r speaking all wonderful. But have anybody found the solution?

Hearing these stories makes me nervous. I'm on the stock ROM (mine came from CompUSA with the latest ROM and I don't have an urge to try the cooked ROM yet). I've been using my Athena daily for 4 months, it charges correctly from several different chargers I have (car, computer USB, stock wall charger, aftermarket wall charger).
However, one day 2 weeks ago I went to make a call in the middle of the day and my Athena was dead. D-e-a-d. Usually I can make it back home at night and still have 90-100% on the battery meter, so with no use in the middle of the day and a dead battery, this was weird. It wouldn't turn on, no soft boot, took the battery out and put it back in, and always got nothing.
I bring this up here because when I plugged it in, I encountered similar problems that others here are describing. It wouldn't turn on, and it didn't give me the orange charging light behind the joystick. I ended up leaving it plugged in for a while and finally I got a red ring, not the usual orange. I've only seen red when the battery was almost dead and the unit was on. Then after some more time the ring turned orange and at this point it would turn on again. I still have no idea why my battery died so fast and hard.
So, is there a problem with the battery charging system that is starting to crop up in units that have been used a while???

miha_conan said:
I get the same problem. My device is work, but not charge. Also like yours i have red ring around the joystick when the battery is taked out. And if battery inside, when i make a softreset it blink one time, continued to load but not charge.
You`r speaking all wonderful. But have anybody found the solution?
Click to expand...
Click to collapse
Hi i am no expert but i had simaler problem no display or no lights round ring no responce to any commands (ie hard reset and bootloader ) only red light flickred on reset button all i did was removed battery while pressing reset button and placed new battery and left it on wall charger for couple of hours and before doing hard reset i pressed reset button 2 to 3 times and green light round the battery came up so i tryed bootloader and it worked and insted of flashing it with pc i just loaded the img in sd card and flashed it while whole thing was on charge (i had tmob test rom before ) which i think is best way to do no hassle of losing connection or failing in half way and it works like a charm
hope this helps
and ya if you have a spare battery it dose help

New battery?
I'm a wizard user (and lots of former PDAs) looking to buy and Athena, maybe.
Has anyone tried a new, right out of the envelope, battery? these issues sound like worn out Li-Ion batteries to me. I've had them completely conk (won't take a charge at all) if I let them go completely down, and I've had them wear out and stop taking a full charge (down to maxing out at about %20, but sometimes showing %100 depending on ROM status) when I kept charging them while they're already charged.
Li-Ion batts don't sit for long periods too well, either, so if they're sitting on the shelf at the store/warehouse, they may be suffering even more than one that has been used since earlier in its childhood.
Perhaps the answer is a switched charger that stops charging when the battery (not the ROM/unit reading) gets to %100. ???
I didn't see anything like this posted. I'm terribly curious to see if anyone can resolve it.

nother AMEO dead
http://forum.xda-developers.com/showthread.php?p=1859021#post1859021

Red ring comes for a sec only try to RESET the device with Charger connected
Click to expand...
Click to collapse
same here,
i am afraid i got a dead athena too, did you guys found any solution?? i tried switching batteries. this is my first experience with a windows mobile device not powering on, in inrepairable condition.
found another member with similar problems- http://forum.xda-developers.com/showpost.php?p=1639311&postcount=24

No genius,s on here,just insults
i have read every page on the advantage x7500,being such an old phone you would thin the genius,s on here could sort it out in seconds,but all they do is insult you.i tried to update from windows 6 on radio 1.20 to michys radio 6.5
it got to 94 percent then crashed, now when i boot up i just get a black and white screen,which then turns white,if it try to reinstall advantage 6.0 the phone reets after 2 or 3 percent..will anyboby help by giving simple term advice to unbrick it? NO.will they provide links to there advice no.THEY JUST INSULT YOU AND SAY ITS IN ONE OF THE THREADS.well im a computer tech and if anybody wants there pc or laptop fixing.guess what i will return the favour with computer speak,THAT YOU CANT UNDERSTAND

Hermes battery drains, Hermes won't charge, get brand new battery, still the same :O

Hello,
I'm sure my Hermes is not dead, I'm just having ridicious battery problems.
My battery completely drained out, I saw the screen fade out and kind of "die" as it happened. I then couldn't even charge the Hermes up, so it seems the battery just ran out of juice period. I googled around and it seemed the only way to revive the battery again is doing some complicated wiry thing with alkaline batteries.
But instead of that I just bought a new replacement battery. But it still won't charge! Does this mean my Hermes actually did die? The battery WAS extremely low so I'm certain that it was the battery. The phone can't just die like that.
Thank you so much for your help. N.B. the phone LED won't even give a red light when plugged in without battery in. I hope that's not a bad sign...

Hey there just a guess but I had a simular problem in the past and it seemed to be due to a defective camera part draining power. Only way I was able to fix it was to remove the camera part and then put it back together.

If the red LED doesn't come on when you connect to the power without the battery then your Hermes is dead, good only for parts.... If the LED does light up, connect the battery and see if it turns amber(orangey) that means its charging.
It could be the internal fuse blew. Might be replaceable but could be costly....

Yes, after reading that other people could usually still see a red LED without the battery, I gave up.
Sigh...well at least I got to see my Hermes die...the screen gradually fading away in front of me....sniff.... I will miss it dearly.
- - -
But life moves on and hey hey hey I'm the proud owner of a new Blackstone! I just wasn't ready to upgrade yet...I wanted to wait until a capacitive screened successor to the Touch HD came out...sigh
But I suppose deaths of family and friends don't happen when you're ready for them
Goodbye my Hermes

eyupwolf said:
Hey there just a guess but I had a simular problem in the past and it seemed to be due to a defective camera part draining power. Only way I was able to fix it was to remove the camera part and then put it back together.
Click to expand...
Click to collapse
Dear eyupwolf, I have similar problems.
Camera just works some times, but after that it can not be initialised again and drains my battery out. So I don't use it anyway (since 99% times tried it didn't work). If I do, I have to reset Hermes many times to set things up.
Can you describe the procedure how you fixed (removed) that problem?
Thank you,
F

battery wont charge
I got the same problems with the Hermes 200. I tired the 3 AAA battries in serial connection but it didn't help.
I even tried to cool the battery for 30 mins in the freezer (an old trick to squeeze the last little bit from the battery) the phone turned on for about 10 seconds but the os never loaded up. the phone shows red when connected to usb without a battery but led turns off when battery is insterted.
I ordered a battery on ebay, but until it arrives does anyone have any other suggestions?
thanks
Scuter
PS. It had Olipro 2.10 spl and recently installed the amazing golden globe v9 rom http://forum.xda-developers.com/showthread.php?t=458456
which is amazing.

Battery Won't Charge

hey, i got the leo just over two weeks ago, and swapped my orange sim for my o2 sim (my phone is unlocked) yesterday night. This morning the phone did not charge at all and i still cannot get it to charge, i have tried via the wall plug and plugging into my PC. At the top of the phone there is a green LED flash and then an orange one.
Any ideas as to why it wont charge, im still under guarentee so if its any problems with the battery etc. i am sure i can get it replaced, Thanks in advance.

i've tried taking out the SIM then turned it on and off, that didn't work. I then tried the same but with the SanDisk card. Still no hope.

Hi, sorry to here about your troubles but it is nothing I haven't seen before. Hope this helps.
http://forum.xda-developers.com/showthread.php?t=610330

Try to release all the energy of the battery, then plug the usb cable to computer, us your PC to charge it.If it dosen't work, congrats then, you are in the same situation as me,
-order a new battery replacement see if it's sloved, if not, send it to HTC for repair.

btw, just curious, are you in Canada as well...?

hi i have the same problem solution is simple you just bend middle pin that connect battery bend it down a little and it should works

Thanks mmpl, I am gonna try that, I wish that may solve my battery drain problem as well.

nah im not Canadian, from the UK. The place i bought it from said i could send it to them and they can check it, if they can't fix it they'll send a new one to me

WOW! amazingly, i had no hope in it. But i did play around with the middle pin just a slight tap backwards and then *forced* the usb into my phone and computer, it switched on switched off i unplugged my phone is did a white screen flash, but it is now holding the solid orange LED of life! i can't understand what on earth was wrong, and it could still not charge but the LED seems to be correct!

Unfortunately i am now experiencing this with a replacement battery from China. It flashes green and orange when plugged in and won't charge. Original battery works normal. Well... back to seller.

Problem Fixed!
Thanks mmpl. The middle prong on the HD2 that connects the battery was pointing slightly up from horizontal (and it looks different than the two prongs and seems a little limp/loose); I pushed it down a little so it's just slightly down from horizontal; put the battery in and that fixed it! Thank you for posting the solution!!!
My symptoms were that the battery indicator icon in the title bar would switch to full bars when plugged in (did not show the plug icon in the title bar as it should have), but when I click on the battery indicator icon the sub screen (showing the battery) would show the actual state of the battery, e.g., 30% with one bar.
I've been also having freeze-up problems when dialing out, thereby requiring a re-boot (take the battery out or push the reset pin) once or twice every day (I'm on the phone a lot however), and maybe the daily removal/re-install of the battery weakened the prong.

Replacement battery from China...
ahdai said:
Unfortunately i am now experiencing this with a replacement battery from China. It flashes green and orange when plugged in and won't charge. Original battery works normal. Well... back to seller.
Click to expand...
Click to collapse
Hi, I also have purchased a cheap replacement battery from China as a backup for my Samsung i500. I cannot charge this battery in the phone! I get a pop window when I connect my charging cable that states; "battery is not connected"! The stock original Samsung OEM battery charges in the phone just fine.
I wonder what the problem is?

mmpl said:
hi i have the same problem solution is simple you just bend middle pin that connect battery bend it down a little and it should works
Click to expand...
Click to collapse
Thanks mmpl, I had not even considered the pin until I read your post.
I know this is the wrong thread for xperia ray, but I just wanted to say that this is something that could happen to absolutely every phone. The middle pin on my ray was stuck in, so far in that it would not connect properly to the battery. By getting a sewing needle in and tinkering it back out it now connects and charges properly.
Also, I hear that if you have flashed your phone you may need to re-calibrate it. If your phone is rooted, you can do this with the aptly named app called BatteryCalibration. Worth considering I think.

CHARGING ISSUE - shouldi be worried?

I bought a second hand HD2, however it arrived with a third-party chinese battery. I contacted the seller who apologised and said that battery was a replacement because the original didn't hold a good charge, and he would send the original through the post. The battery however was fully charged so I flashed all the neccessary files and installed NAND Android (my reason for buying it in the first place), however today - the same day it arrived - I noticed that the orange charge light was going off, usually when the phone screen went off. This necessitated plugging the USB lead back in again, and within sometimes less than a minute the same problem would occur. I have checked the battery prongs, reset the the phone, changed USB settings etc and the problem persists.
Just wondered of I should be worried...I am unable to find an identical problem to this on the forums so I'm assuming it's not a ROM issue. I am currently using the Desire port from DFT.
Would a cheap Chinese battery demonstrate this sort of problem?
The seller says he never had an issue of charging the phone.
My next resort is to flash Windows Mobile back on, but I'm at work and a bit anxious so was hoping for someone with some experience to reassure me!
All USB syncing etc works fine...it is literally just charging that's the issue.

Maybe it's your USB that's faulty. I had a faulty usb that would go on and off sometimes too. However I don't see why the battery would affect the LED light, as the battery has to be connected to the phone for it to stay on, and so the battery can't be losing it's connection with the phone randomly, so it's either your usb cord, or the port.
Word of advice, don't let your phone lose power cuz of the faulty charging. I assume you know that MAGLDR doesn't let you charge the phone while off, so a dead battery in our case, is a dead phone. Happened to me once cuz of my usb, luckily there was still a small amount of charge left after i took the battery out and placed it back in.

It's definitely not the cable as I've used an official HTC charger with it which does exactly the same thing. I've also tried with a Samsung MicroUSB charger from my Galaxy S

Maybe it's the usb port then... That's the worst case scenario because you'd have to get the whole motherboard replaced...
However if in winmo you don't experience the problems, then it was just some software problems, so try a different radio and build, and see if they work.
Edit:
Or maybe it's the LED that's faulty. (never heard of such a situation but anything is possible) >.>
Does it still charge even if the LED is not orange/on?

Thing is though I can pretty much get it to stay charging if I don't let it lock and the screen go off? Could this still be a problem with the USB port? I'm getting worried now as I don't like the hassle of sending things back through eBay. I'm wondering if the seller bought a spare battery thinking it was just a battery problem and isn't telling the whole story. Foolishly I didn't test the device with Windows Mobile, I just went straight into flashing as I had put Android on my friend's HD2 the other day in exactly the same way...his is even an ex Virgin Mobile phone like this one. Needless to say, he is having no charging issues.

Dude dont worry , the problem is the battery ! i got two chinese battery ones and both cant charge with the phone, i have to use eksternal charger Dont worry the red and orange led flashes constantly when i try to charge it
Just buy a cheap charger from ebay , and buy a oem htc hd2 battery

Hi thanks for your reply. Mine doesn't flash red and orange though: the orange light comes on as normal and the phone reports it as charging, but after a while (seems to be when the phone goes to standby most of the time) the orange light turns off and the charging symbol disappears. If I unplug and replug again the light comes back on for a period. I've not tested thoroughly but I THINK it will stay charging when I leave the phone out of standby with the screen set to stay on for 30 minutes. I really HOPE it's a battery issue but it sounds slightly different to yours as mine does at least charge to a degree. I'm worried there's a blown capacitor somewhere on the logic board that's making the phone charge malfunction but obviously there's no way of testing until I get a new battery.
It concerns me that the seller said he had no charging problems...he must have been able to charge it somehow as the battery was full when it arrived...could I have burnt something out when flashing?!

Mine do charge to about 50 % and then it stops
Im 100 % sure its the battery becouse the battery has a circuitboard inside of it, and thats often messed up considering its made cheap in china . But test it with your friends hd2 original battery You can 2 see if the wet indicatior has been activated
the " white " paper next to the battery poles should be white and not pink, alltso where the skrewholes of the phone that should allso be white just to make sure your phone is not waterdamaget

I don't think flashing could have burnt something out. Overclocking and generating a lot of heat can burn something out though.
Didn't you receive the stock battery? Why not try it with that, and if the problem stilll persists then it might not be the battery. Either way, it will help you to test out the phone with a stock battery.

I tried it again after a few hours and it charged for a fair while before the light went off again.
I don't have the original battery as the seller has yet to mail it to me.
Does anyone else think it's worth me trying out a stock Windows Mobile ROM to see if it works? Might be that Android ROMs are less forgiving of cheap batteries with dodgy circuitry..

UPDATE
Ok so I've flashed Windows Mobile onto the device and wiped Magldr. The phone now alternates between a green and an amber light on the charging indicator. Looks like Windows Mobile won't charge it at all!
Does anyone know what this means?
I've checked for water damage in the areas mentioned and there is no sign.

Well your best bet is to send it in for repairs. But I'd suggest you test the phone out first with a stock battery.

Well I Only bought the phone yesterday so I certainly won't be paying for any repairs.
Got a replacement battery today - a genuine HTC one.
Plugged in, switched on....flashing between amber and green
I have a nagging suspicion this is going to be an eBay refund nightmare.

have you checked that the pins on the phone is not bendt? pins where battery poles connect to phone

problem solved? fingers crossed
OK so as a last resort I flashed radio 2.15 to the device. Seems that this has completely fixed the problem as without even restoring the phone is now charging properly. It seems that a corrupted radio flash had affected the charge somehow....at least I hope so.
The same problem has not come back again today at all.
Might be worth throwing this solution in a problems and solutions section as I haven't found any reference to it on the net and it might fix things for others panicking over their handsets.

That's nice.
Good for you, since it's a hassle to deal with sending back the device and shizz like that.

was just searching is anyone had a similar problem like me. to the OP yours sounds like my problem.
Had these fake OEM batteries for a while now. Until recently they have been charging ang turning off in 1 1/2 minutes. put a genuine OEM battery in and the problem is gone.
My solution was OEM can charge thru phone but fakes cant, use fakes as backup and charge it thru a desktop charger. goodluck