Resco Radio over BT Headset issue after a call! - HD2 General

I have bluetooth headset SE HBH-PV740 and I can hear Resco Radio over it but after receiving or outgoing call the sound is coming out of the HD2 speaker.
I couldn´t find any way to change it back to bluetooth headset again but softreset.
What is the problem?
I hope it´s not caused by the widcomm stack...
In fact the widcomm stack already is a big issue for voicedial, too.
edit: I realized that my stereo bluetooth headset (Motorola HT820) can establish connection again after stopping call. But the non stereo bluetooth headset (se hbh-pv740) cannot do. This one needs a softreset to listen to resco radio again.

Related

HP BT stereo headphones with XDAII

Does anyone tried to connect the XDAII with the new HP BT stereo heaphones with XDAII?
I have this HP device but can not install it.
Bummer..
Widcomm BT Stack on XDAII...
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Interesting. Will check it out and reply.
This is my experience using a HP bluetooth stereo headphone bonded with an O2 xdaII. I use Wincom 1.5 Build 2000 from "dtktvu". So far the setup has worked very well. After having used the setup for three weeks, my impression is as follows:
1. Connection with headset is very stable
2. Stereo sound is clear, quality is quite superb really.
3. So far this setup works only for music, it does not work together with bluetooth headsets (if you happen to have one). This means that you can not use your headset at all while using the headphone.
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
5. You have to use Windows Media Player as the player for point 4 to happen. I am not sure how the setup will react to incoming calls with other players such as Winamp, GS Player etc..
6. Battery life is quite good. I get about 6-7 hours of playtime from the headphone.
Now, if only someone will update this Wincom Driver further so that it can work together with bluetooth headsets, then we will have the best of both worlds... Maybe donations from potential users to provide incentive to some expert out there.
Widcomm BT Stack - Get it here
http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
You may need this key as well
[HKEY_LOCAL_MACHINE\Services\BTIcon]
"Dll"=""
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\Transports\BuiltIn\3]
"driver"=""
Thank you to dtktvu
Widcom on XDA II without Windows Mobile SE?
I would also like to use the HP bluetooth headset. I have a XDA II (not IIs). Will the Widdcom stack install on this? I am currently not running Windows Mobile SE.
Many thanks.
keys
where do we copy and paste those keys? do you think this could work with the Magician?
khanh_xda said:
4. The only inconvenience is that if there is an incoming call during song playback, the music pauses but there is not any other audio warning. On the screen you do get a warning that there is an incoming call, though. So in my case, while I listen to music, if I hear a sudden pause then I know that there is an incoming call and act accordingly. Now, let us come to the next point....
Click to expand...
Click to collapse
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.
[/quote]
Try MS VoiceCommand - in new 1.5 version there is incoming call voice notyfication (normal ring goes at half of the sound level and voice engine reads callers ID) maybe it will go through UR headset.[/quote]
Thanks for the pointer, didn't work though.
Would welcome any other ideas.
Will this work on XdA2JoJo.v3.2zS version that has broadcom 3900? I'm planning in getting one.
Need advise...
Thanks
HP BT stereo headphones with XDAIIi
Hi,
I've read the thread but cannot see any indication of someone using an XDA IIi and the HP BT stereo headphones. Anyone know anything about this particular combination? So far I know the software that comes with the HP BT stereo headphones will not install on the XDA. And without the BT high quality audio profile installed I cannot get past pairing the devices. Any ideas?
Thanks,
R
Re: HP BT stereo headphones with XDAIIi
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
someone tried hp bluetooth headset with wm5?
Re: Widcomm BT Stack on XDAII...
dtktvu said:
HP BT stereo headphones does work with XDAII (myself and few friends have been using it for a while now). You will need to install Widcomm BT stack (1.0.0.3500 or 1.5.0.2000, or the one that have High Quality Audio Profile) though.
However, you will loose Bluetooth Headset profile if you install Widcomm BT Stack. Apparently BT headset does not work with Widcomm stack on XDAII yet. I've managed to get the headset detects incoming calls, take calls, but still no sound coming out from the headset yet. Still trying...
Click to expand...
Click to collapse
Other than the hp headset, does it work on i-tech clip S or i-tech clip S35 bluetooth stereo headset as well.
Re: HP BT stereo headphones with XDAIIi
hahol said:
rodrigol said:
Anyone know anything about this particular combination?
Click to expand...
Click to collapse
I am using this combination.
I have HP iPaq BT stereo headset and O2 XDA IIi.
Just did the following.
0 Full backup!
1 Uninstall a GPS software that was using BT Serial Port (GPS tuner, OziExplorer, Russa)
2 Uninstall BT Tools
3 Remove all paired devices
4 Soft reset
6 Install Attached file (warning: with this patch you will not be able to use a HandsFree BT, so if you do not really mind, then continue).
7 Soft Reset
8 In BT manager Find HP Headphones and pair them with password "0000"
9 Start Player and press a cental button on headphones.
10 Then I installed back GPS software and BT Tools.
11 Check thet everithing works fine, make a full backup.
Click to expand...
Click to collapse
install where ? :?:
has anybody done it this way !
Bstard said:
someone tried hp bluetooth headset with wm5?
Click to expand...
Click to collapse
anyone an idea? i want a bt headset (hp) but not willing 2 go back 2 wm2003
headsets
I have three stereo bluetooth headsets here for testing purposes:
- Logitech Wireless Bluetooth MP3 Headphones for PC (aka Hewlett Packard FA303 or Toshiba PA1831)
- Motorola HT820
- iTech Blueband
I have tested them on my Qtek 9090 (BlueAngel) and they all worked fine. There is not much diffrence in audi quality, the diffrence is more in the comfort of wearing them. Most of my collegues liked the Motorola the most but I prefer the Logitech. The iTech feels a little bit cheap...
More experience and info about stereo bluetooth headset is posted on http://www.robertwebbe.nl/A2DP.html.
Has anyone connected headphones with XDAII? i can't at all( after installing broadcom 1.5 phone cannot call correctly, i can't hear anything(
I have a iMate PDA2k EVDO & iTech BlueBAND headpones. I was able to use use the BT headset to use the phone however as the Broadcom 3500 stack didn't come with a Audio profile I couldn't hear music (mp3s via WM10). I installed Broadcom 3900 stack - can now hear stereo music but the volume on the phone is so low I can bearly hear it. Otherwise my PDA is stock standard Windows 2003 WWE etc. Any suggests? As I am a new owner, I would appreciate the help. Cheers,
Hi
I have recently received a Blue Angel from our mobile provider and it comes with the Bradcom stack 1.0.0.3900.
Does it have A2DP integrated, or I need to install anything to make it compatible? I am interested on a Motorola HT820 headset and i want to make sure it will be compatible...
Broadcom Bluetooth stack for Benq P50
Hi,
Has anyone tried installing the Broadcom Bluetooth stack onto a Benq P50 Window2003 2nd edition? Thanks.
Cheers!

Cyberon Voice command with Bluetooth in HP6315 and 6515

Hi ,
I know many guys are intesting use VC through bluetooth headset. I found that it can be done in HP6315. Original there is only hands-free/Headset profile for bluetoothn in 6315, the Widcomm BT version is 1.0.0build 3701, the all sounds is from phone to BT headset,the VC dial can be down through BT headset. But the MP3 quality is very poor.
I just upgrade the Widcomm driver to 1.6.0.700, there have another "High quality Audio"profile, so you can use stero BT headset to listen MP3. The quality is good. So if we use SE HBH-ds970 BT headst, we can listen good MP3 and also can dial the number through VC use HBH-ds970. It is very convenience to get both function. When you launch VC, the phone will connect BT handset, the sound is transfer to headset, you can say the number or others instruction by BT headset, when you finish it, the connection between 6315 and BT headset will automatic be active. It will not lost the battery of headset.
Here the question is I 'd like do it in 6515 since I need the mini keyboard and GPS function. 6515 already have "High quality Audio" and "Handsfree/Headset" profile, you can listen good quality music and also can call/answer the calling through BT headset. But it can not use VC, the VC sound is always from phone.
I check the Reg file of them, its are almost same. Unfortunately, I do not have knowledge of Reg file and widcomm stack, can some expert can help me on this?
Thanks in advance!
Regards,
lxy
Could someone share the latest BT drivers for 6515e?
Hi,
I wonder if I could find a good voice dialing software for my iPAQ. Could you please help?
Also, does anyone know the latest BT version post the 1.21 rom?
Thanks and kind regards,
Prankey

HTC P3600 pairing with the Philips SHB7102 Stereo Bluetooth headset

I have a HTC P3600 (Trinity) PDA telephone with WM5 installed on it. I use it with the Philips SHB7102 Bluetooth Stereo Headset. When I pair the Philips SHB7102 Bluetooth Stereo Headset with my PDA it connects. When I walk away from the PDA for more than 10 metres and than walk back, I have to redo the whole pairing again from the beginning. The strange thing is that when I walk back the telephone function is normally working through my Philips SHB7102 Bluetooth Stereo Headset (it recoqnize my bluetooth headset) but the Wireless Stereo function (musicplayer software on my PDA) doesn't Recognize my bluetooth headset. So for this I have to do the whole repairing process again. If I turn off the bluetooth headset and then turn it on again I also have to do the whole repairing process again. The manual says that the pairing process is a one time process. This is only true for the telephone function but not for the music listening function.
I also tried the HTC P3600 with the Plantronics Pulsar 260 Bluetooth Stereo Headset and then this problem didn't occur. With the Plantronics the pairing is a one time action, but the sound quality is far less good as the Philips.
Does anyone has the same problem or knows how to fix this.

**HELP!** Problem with SE DS980 Music Streaming

Hi guys,
I have experienced a nagging issue with my SonyEricsson DS980 bluetooth headset paired with the Dopod 838Pro (Official WM6 3.54.707.3 ROM).
Here goes: Cyberon Voice Command, A2DP and AVRCP works flawlessly but once a call is initiated, thereafter during or after the call, the DS980 disconnects itself and I have trouble reconnecting it again. Had to soft-reset to get it working.
I have done several hard resets and also tried A2DPfix, HTweaksC and also Jetware Bluetooth Extension 1.3.1, but to no avail...
Can someone help?
Or can any registry hack / software help?
You have to pair your device as hands-free and high quality audio too(and disable standard audio for hands-free if you use multiple devices).
nezz said:
You have to pair your device as hands-free and high quality audio too(and disable standard audio for hands-free if you use multiple devices).
Click to expand...
Click to collapse
I have paired my device as hands-free and high quality audio already and the headset is paired solely to my PDA only (no multiple devices)...
Any other recommended solutions?
I'm desperate...
If you have it connected as handsfree and you see the headset icon it should work.
nezz said:
If you have it connected as handsfree and you see the headset icon it should work.
Click to expand...
Click to collapse
Problem is I can see the icon and it is connected perfectly but the problem still happens!

A2DP together with Bluetooth headset

I’m running the official HTC (Dutch) Windows Mobile 6 version on the HTC X7500.
I’m using a Motorola HT820 Stereo Bluetooth headset to listen to music by A2DP.
I’m using a Jabra BT5010 Bluetooth headset for voice calls.
Voicecalls with the BT5010 are no problem at all. Listening to music with the Motorola headset is no problem too, when the Jabra IS NOT connected (turned off) at the same time.
The Motorola stereo headset and the Jabra BT5010 can both be connected at the same time, they are even working (I can call with the Jabra and listen to music with the Motorola) but now and then the stereo music is lagging.
When it starts lagging in stereo audio playback it doesn’t seem to stop anymore. Sometimes the music continues the normal way, and sometimes the lags will come up again a few seconds later.
There are no more lags when I then shut down the Jabra headset.
Is there a way to solve this? It looks like some sort of “Bluetooth bandwith” issue since it only happens when both headsets are connected.
Please note that even though the Motorola HT820 can make voice calls too, I only checked the “Wireless Stereo” service to be used, and “Wireless headset” is only selected for the Jabra.
Adding/editing registry entries like BitPool, UseJointStereo, MaxBitPool, SampleRate and all WILL NOT resolve this problem, I’ve already tried that.
Thanks guys!!

Categories

Resources