hi. is there a way to quickly password lock the phone? anyone know? lets say im using the phone somewhere where dont feel secure, fear of it be stolen... can I password lock it quickly with a shortcut/ hardware button?k thanx
Anyone please?
Has anyone idea how this can be done? there must be away to activate the password lock immedieately?
I know you can set the password to 5minutes, but normal circumstances it would be annoying to always keep entering the pin. I wonder there must be a way to activate the password/pin lock immmeadiately to prevent unauthorised use (ie if phone gets stolen).
Dont know if this is what you mean. But try S2U2 it has a password lock that can be set to lock immedieately.
there is a program specifically for that called SmartPhoneTracker. i think some of the newer updates introduce an autolock feature...
check it out...
You could program the End Key to lock the device - in Settings, choose Long Press End Key and set it to Lock Device. Then when you press & hold the End (hang up) key, it locks.
Any good to you?
Caerb
Related
I did a search but could not find a result.
Is there a way to place a shortcut to lock device. I know S2U2 and all but I prefer Organic Lock which does not just run by itself (like for S2U2, I just run S2U2.exe and the device is locked). So I was trying to look for a way to lock as a shortcut for a button but to no avail.
Does anyone know a way? Thanks in advance.
testdasi said:
I did a search but could not find a result.
Is there a way to place a shortcut to lock device. I know S2U2 and all but I prefer Organic Lock which does not just run by itself (like for S2U2, I just run S2U2.exe and the device is locked). So I was trying to look for a way to lock as a shortcut for a button but to no avail.
Does anyone know a way? Thanks in advance.
Click to expand...
Click to collapse
There are a couple of different ways it could be done. If organic lock is what you are wanting to use then lets post this question in that thread to generate results that last with that program.
an alternative... http://forum.xda-developers.com/showpost.php?p=2141872&postcount=187
is there also a way to lock the device as you can set it in the settings...
i have the problem, that if i set the automatic locking to 1 minute, its mostly is to short and i do have to reenter my 4 digit pin.
if i set it to 5 minutes (next option point after the 1 minute), then the period is too long... so how can i use a button or program, that locks the devicce, that you would need to reenter the password to unlock it? like if you softreset your device?
is there a way?
Hi all,
Do you know how to auto lock wm6.5 when you turn off the mobile? I speak about the "standard" lock screen not a software like S2U2.
Thanks in advance for the tweak.
Regards, Sylvain.
you can use smartlock : http://forum.xda-developers.com/showthread.php?t=505032
Or you can just check the Auto Lock in the Lock Settings. Then every time you boot the phone, turn on the screen, etc... it will prompt for your 4 digit pin and slide to unlock.
player911 said:
Or you can just check the Auto Lock in the Lock Settings. Then every time you boot the phone, turn on the screen, etc... it will prompt for your 4 digit pin and slide to unlock.
Click to expand...
Click to collapse
Hi,
Thanks for your answer but I would like to lock the phone without a digit pin. I don't know if there is a registry key for that or something I can change with Advanced Configuration Tools, HTCPedia, HD Tweak...
I'm sure I have seen an old post with this kind of trick but I can't find it that's why I need your help.
If you have another idea...
Thanks
vinsyl said:
Hi,
Thanks for your answer but I would like to lock the phone without a digit pin. I don't know if there is a registry key for that or something I can change with Advanced Configuration Tools, HTCPedia, HD Tweak...
I'm sure I have seen an old post with this kind of trick but I can't find it that's why I need your help.
If you have another idea...
Thanks
Click to expand...
Click to collapse
http://thewingster.com/autolockscreen.aspx
Does exactly what you want! Remember to configure it after installing, under Start - Settings - System - Smart Lock.
You can"t do it by changing a registry key. A light application to auto-lock is LockDevice, link (and other applications links) here : http://forum.xda-developers.com/showthread.php?t=550973
or simply use smartlock ... it's the easiest way to lock your device
I realise that this might not help you but, if you hold down the hang up button for 1 sec another menu appears and you can press lock. it also has other functions on the menu like cancelling data connections turning flight mode on etc.
hello all...i had a quick question regarding throttle lock...the reason im using it is as an alternative to s2u2 bc that is a battery hog on my tp2...i was wondering if anyone knows through experience whether or not throttlelock will consume less battery power...also, is there a way to get it to lock whenever u put the phone into "sleep" mode (pressing the top power button to shut off the screen)...thats really the only thing i want to use it for...for example, when i press the top power button and the screen goes off, how do i get throttlelock to be whats on the screen when i "wake" the phone back up...it seems to me that the only options are to have it activate once u restart (power off and on) the phone or by pressing the throttle lock icon...i would find it very more useful if u could use it like s2u2 (turn screen off and tada!!! theres throttlelock)...can anyone help???
try smartlock. It works with the 6.5 lock and adds the functionality of locking when the phone is powered down. Search for the cab and there are instructions on what box to check to get that functionality.
will smartlock work with 6.1?
I tried s2u2 and also found that it seemed to use more power (based on readings from Homescreen++). Using throttlelock doesn't seem to have much noticable increase at all.
As for getting it to lock when you turn the screen off and wake try the following ...
Go into settings > Lock > Change 'idle time before lock' to '1' then click ok to save settings. Then exit the config go back in and change this back to '0' and 'ok'/save.
It works on my xperia as your wanting ... e.g, turn off screen using button on top, turn on and I need to enter the sequence to activate. I can't find the thread that I read the above solution on at the moment but if your struggling I will see if i can find it.
Throttlelock seems to be ok for me. It does not take much RAM, and does not consume that much power. I do have the lock thing to 0, and throttle lock comes up whenever i turn the phone on.
I used to use smartlock, but for some reason it doesnt work on the build i have!
sillysquid said:
I tried s2u2 and also found that it seemed to use more power (based on readings from Homescreen++). Using throttlelock doesn't seem to have much noticable increase at all.
As for getting it to lock when you turn the screen off and wake try the following ...
Go into settings > Lock > Change 'idle time before lock' to '1' then click ok to save settings. Then exit the config go back in and change this back to '0' and 'ok'/save.
It works on my xperia as your wanting ... e.g, turn off screen using button on top, turn on and I need to enter the sequence to activate. I can't find the thread that I read the above solution on at the moment but if your struggling I will see if i can find it.
Click to expand...
Click to collapse
well, i appreciate the help but unfortuantely that method, nor anything else i do makes it work like i want it to...any other options?
do you have to disable the pin lock before using throttlelock? i currently have to enter a pin and dont know how to disable it
mwrood said:
well, i appreciate the help but unfortuantely that method, nor anything else i do makes it work like i want it to...any other options?
Click to expand...
Click to collapse
I realise this is probably a daft suggestion but you do have autolock switch in the config?
Are you using 0.7?
Heres a link to the Throttlelock website wiki explaining the functions.
Might be of some help.
I'm having some trouble with the incoming call feature but apart from that it seems pretty stable.
I've tried the other options but the pattern unlock does it for me
judicious said:
do you have to disable the pin lock before using throttlelock? i currently have to enter a pin and dont know how to disable it
Click to expand...
Click to collapse
Do you mean the sim pinlock?
On mine the simlock asks for the password when i start up and i use throttlelock as a general screenlock.
sillysquid said:
Do you mean the sim pinlock?
On mine the simlock asks for the password when i start up and i use throttlelock as a general screenlock.
Click to expand...
Click to collapse
it's the pin lock for the whole because i use exchange mail, it's a security pin that everytime the phone goes to sleep, i have to enter it in. i did find a fix for this, it's in the reg file.
How do you use the new WM6.5 without setting a password?
On the demonstration videos of WM6.5 around the web, there is no password screen when they slide the lock. But I can only activate the lock when i also set a password.
Hopefully someone can help solve this.
I do not want to use another program when Microsoft finally implemented this feature in the new Mobile OS.
http://forum.xda-developers.com/showthread.php?t=542482&highlight=lockdevice maybe your looking for something like this?
If you are trying to disable the default pin lock goto settings-Lock. Under password uncheck "prompt if phone unused for" thats all I did.
larsmn said:
How do you use the new WM6.5 without setting a password?
On the demonstration videos of WM6.5 around the web, there is no password screen when they slide the lock. But I can only activate the lock when i also set a password.
Hopefully someone can help solve this.
I do not want to use another program when Microsoft finally implemented this feature in the new Mobile OS.
Click to expand...
Click to collapse
If you press and hold the hang up button you can choose lock phone - no password setting required
seems like you should be able to reprogram a key to lock..
SmartLock 1.7E
Hi all
Look for SmartLock 1.7E. You can set it to "Suspend Lock" which means every time the device is resumed from being suspended its locked.
Cheers
andrew-in-woking
I did search in HD2 android thread, but did not get the answer.
Is it possible to set only the power key (or just one single specific key) to active the screen?
It is too easy for me to active the screen and mistakenly unlock it while I put it in my pants' pocket. The screen is very sensitive.
Any help? thanks.
Easy
just set up a password or pattern lock this way it wont accidently activate and call somoene
Thanks, almost forgot i can do it that way
casemandan said:
Easy
just set up a password or pattern lock this way it wont accidently activate and call somoene
Click to expand...
Click to collapse