Related
Hope someone can help me with this. I am developing an application using VB.net and I have two problems.
1. When I copy the .exe file to my SX66 and try to run it nothing happens. I can see a wait cursor appear briefly and it seems to be starting but nothing happens after that (no error messages even). I have seen the same problem with other VB.net apps I have tried to use that others created.
I have the latest .Net Compact framework installed. The app works fine on a Toshiba Pocket PC I have with the older verison of Pocket PC 2003.
2. When I try to run the app directly from VB.net VB.net doesn't recognize that there is a device connected and won't copy the .exe from my desktop to my SX66. This works fine with the Toshiba Pocket PC too.
is your sx66 connected to activeSync ?
Does it run on your Emulator?
Yes on activesync
I haven't tried the emulator. As I said it works fine on a Toshiba PPC so I am figuring it will work in the emulator. I am pretty sure it is something on the SX66 because I have seen the same problem with other .NET apps that I have tried to use that were created by someone else.
is the debug manager service running?
Hi,
feeling very silly for asking... how do you install Compact .Net?
Or better: how do you get it to be recognized by the system?
I have installed the latest Cnet 2 SP1 version, which appears among the installed apps both on my desktop Pc and on the Wizard... but HitchHiker won't install as "you need Compact .Net installed..."!!!
I know I did find a solution a few months ago when first installing the damn app, but I can't remember what it was. I searched the forum and I only found a suggestion to close all the running app on the Wiz, but this doesn't seem to work.
Can anybody provide a reliable procedure to get it working?
TIA!
hi there
from your post it seems that you have not install .net compact framework on ur wizard.
it is very simple, all you need to do is to find out if you need .net compact framework v1.1 or 2.0? i am not sure if both is compatible with each other.
then goto micrsoft website and search for the download link to either one. download the installation file to your pc and run the installation there. it will install on ur wizard over activesync.
Not so simple, in fact.
I'm using the right build, and it installs nicely both on the desktop Pc and the Wiz.
Only problem is: when I try to install Hitchhiker (from the PC, as it is the only possible setup), it doesn't recognize the presence of C.Net.
did you install in a storage card or ram?
have you got the right version?
No more blues!
The problem wasn't in c.Net at all, but in the faulty instructions for HitchHiker! It turns out it needs BOTH c.Net and the "normal" .Net framework to be installed, but they only state it needs the Compact flavour.
I just wonder how come nobody else came up with this issue before...
Thanks to everyone, however!
now this really puzzled me. does wm5 able to run .net framework as well as compact framework? as far as i know wm2003 only able to run .net compact framework.
how do you squeeze 20mb of file, not to mention not mobile device install file for .net framrwork?
I don't. Compact .Net does a double-install on both che desktop and the Wiz, while "normal" .Net framework only installs on the desktop, but is apparently needed to get the Hitchiker app to install... on the portable device.
There WAS a reason for which I couldn't get around it all, y'see?
Most apps here require the latest .net Compact Framework. Here is v3.5 cab which works on Diamond/Touch Pro:
http://rapidshare.com/files/150399830/NETCFv35.rar
EXE:
http://rapidshare.com/files/130519938/NETCFSetupv35.msi
http://download.microsoft.com/download/c/b/e/cbe1c611-7f2f-4bcf-921d-2df718591e1e/NETCFSetupv35.msi
Remote Desktop:
http://rapidshare.com/files/151331556/Remote_Desktop.rar
.Net Compact Framework v3.5 + Remote Desktop:
http://rapidshare.com/files/151332489/Missing.rar
thanks but er
how do i install it?
i mean i installed once but i forgot..
and i formatted the phone
now i connect the diamond in activesync then run netcf... from my computer
then on my diamond theres the ''do you wanna install'' screen
then i click yes and it says install unsuccessful
the cab should run on your device, so just copy it over then run it
cab file name is: NETCFv35.wm.armv4i
okay thanks i will try that
hi, im getting install unsuccessful, untrusted certificate error message....
any ideas?
Thanks
Ed
no idea sorry.
here is another file that is missing:
Remote Desktop: http://rapidshare.com/files/151331556/Remote_Desktop.rar
Dude Is there A Cab I Can Just Install Threw My Phone My Pc Is Jacked.
Hello, I am trying to install frameworks to DiamondTouch , but the problem is that I am "green" , can You expain me how to do that ?pleasssse
Mirror link for cab file
http://rapidshare.com/files/304384771/NETCFv35-ALL-IN-ONE.cab
im using imate ultimate 8502 and running the windows mobile 6.1...
where could i find the .net compact framework v3.5???
thx
You can find it here:
http://rapidshare.com/files/304384771/NETCFv35-ALL-IN-ONE.cab
Can you make another download . RapidShare asks for Premium User which i don't have .
thanks a lot
It is not a big file and you can download it as a free user easily.
it says become a premium member...
compact 3.5
went to link (rapidshare) - did free user download - received message that the download was
unsuccessful. i am running a paid version of spb mobile shell, have the basic rom and radio that came with phone. is there anywhere else to find this? i had it before, but have had to get refurb phone...again..so not sure where to find it. thanks
ps also- i know am in wrong part,but really would like to know more about new rom and windows 6.5, how easy or should i say hard is it to
put it on here? though, i do understand that u guys have already did the hardest part.
I am traing to install NETCFv35-ALL-IN-ONE.cab and it keep having an error msg saying
"Instalation error. Stop all aplications and processes, maximize available disc space and execut the installation again. Support informations: 2."
I all so traied NETCFv35.wm.armv4i.cab and hapens the same.
I have instaled on the phone .net 2.0.7045.0 (ROM) do I need to uninstall this first?
And sorry about my english
My Phone is the touch HD
hi to run most of the good apps you need frame work 3.5 i have down loaded it but i cant install it do i on my phone but if i click on it on the pc then it trys to install on the pc any help thanks alot
dareuk said:
hi to run most of the good apps you need frame work 3.5 i have down loaded it but i cant install it do i on my phone but if i click on it on the pc then it trys to install on the pc any help thanks alot
Click to expand...
Click to collapse
--are you sure that the base rom hasn't .net 3.5 already installed?
.net compact framework 3.5 is not standard installed on a TD2 aka Topaz.
Download it from MSDN Microsoft here: http://msdn.microsoft.com/en-us/netframework/default.aspx
dareuk said:
hi to run most of the good apps you need frame work 3.5 i have down loaded it but i cant install it do i on my phone but if i click on it on the pc then it trys to install on the pc any help thanks alot
Click to expand...
Click to collapse
You should have a Active Sync (Windows XP) connection with your device.
For Windows Vista and Windows 7 you must connect through Windows Mobile Device Center.
Active Sync 4.5 and Windows Mobile Device Center are free for download from Microsoft: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync-download.mspx
It looks like the framework is being installed on your PC but it will be installed on your phone.
You must have .net compact framework 3.5 from my link above.
ok downloaded every thing you have stated and installed accordingly but im still no further forward if you could add me to msn and help me out id really appreciate it buddy add me : [email protected] thanks alot guys
having the same problem. I connected Topaz to PC via active sync and waited to install net framework. Tried to open advanced config and said I needed net framework 3.5 at least. I think I know the problem, I JUST THINK :d
yea im no noob but this is really confusing me i cant update to 3.5 any one help me thanks
updating to .NET 3.5
dareuk said:
yea im no noob but this is really confusing me i cant update to 3.5 any one help me thanks
Click to expand...
Click to collapse
I`m confused too: my polaris says - .NET 3.5 is already at the ROM but I´ve got a punch of apps which cannot be installed on behalf of lecking "actual .NET-version"????
sucks a lot - could somebody give me a hand instead of HR?
thxs in advance
Download this:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
and run it on your PC. The idea is that it'll then copy CF3.5 to your device the next time you connect via activesync. If it doesn't do that for some reason then goto C:\Program Files\Microsoft.NET\SDK\CompactFramework\v3.5\WindowsCE on your PC and copy the file NETCFv35.wm.armv4i.cab onto your D2. Then using the D2, find that file in File Explorer and click on it, to install it manually.
Tom Lenferink said:
.net compact framework 3.5 is not standard installed on a TD2 aka Topaz.
Download it from MSDN Microsoft here: http://msdn.microsoft.com/en-us/netframework/default.aspx
Click to expand...
Click to collapse
That link is for the desktop .NET 3.5, not the Compact Framework, which kinda explains why people were having no success with it!
I have isntalled on my PC compact version and same problem ...
see http://forum.xda-developers.com/showthread.php?t=347537. Download the cab file and put in on the sd-card, doubleclick on the file
NETCFv35.wm.armv4i.cab and install process begin. I hope it works for yoy
http://forum.xda-developers.com/showthread.php?t=529783
If you don't use Activesync, you may want to get just the cab file instead. Just google for NETCFv35.wm.armv4i.cab, then instal like any other app, to the main memory.
Also, whilst you're about it, google netcfcfg.cab. This app lets you set windows CF policy, so that all apps which need CF2.0 to run will automatically use your newly installed CF3.5, which is apparently better and more stable.
The file sizes should be 2644KB and 34KB respectively.
Click to expand...
Click to collapse
For what it's worth, the above mentioned netcfcfg.cab .NET config program is part of the CF 3.5 Power Toys, available from MS here: http://www.microsoft.com/downloads/...14-a27d-4148-bf01-86c2e0953eab&displaylang=en
HandySpanner said:
Download this:
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
and run it on your PC. The idea is that it'll then copy CF3.5 to your device the next time you connect via activesync. If it doesn't do that for some reason then goto C:\Program Files\Microsoft.NET\SDK\CompactFramework\v3.5\WindowsCE on your PC and copy the file NETCFv35.wm.armv4i.cab onto your D2. Then using the D2, find that file in File Explorer and click on it, to install it manually.
Click to expand...
Click to collapse
Thanks for info....it's working for me
HandySpanner said:
That link is for the desktop .NET 3.5, not the Compact Framework, which kinda explains why people were having no success with it!
Click to expand...
Click to collapse
Sorry, my bad, here it is: http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
okay, will try and give you info
Pete_S said:
http://forum.xda-developers.com/showthread.php?t=529783
Click to expand...
Click to collapse
I was never able to get the cab file to work. Every time I ran it on the phone, I got an error saying that the aplication was not installed. When I installed the full msi on my laptop with the TD2 attached it successfuly installed on the phone.
works great. copy NETCFv35.wm.armv4i.cab, install, soft reset and go for it
do you want to try this
http://bbs.592ppc.com/attachment.ph...e4gKy/xwc1N87qsQH22Bnc32Fwr2Hs75z4ra9fJ87poIE
Hi
I have an question, I downloaded on the site http://www.freewarepocketpc.net some applications but they didn't start on my Pro2 with WM6.5 he says me that there would be an error with .NET Compact Framework. but i made an update and it doesn't start yet. Waht could I do?
Thanks
try this
did you open the net framework file on your computer while your phone was plugged in/with an active syn connection? i dont think you can open it straight from your phone and use it on your phone,pretty sure it must be opened on your home computer
try explaining it again? i might be able to help,which program did u download and how did you install 3.5 net framework,via your computer or what?
I just downloaded : TicTacToe.CAB / BubbleSetup.CAB / PowerRadio.CAB / SinkMyShipsSetup.CAB / HTCLightSaberSetup.CAB
I made them on my phone and there opened them for installing , when the instalaition was finished the phone said it would be in order but wehn i tryed to start one of the programms it did start
ok
do you get an error message? what did it say if you did? explain to me how you installed netframe work 3.5 ,did you install it on your computer while your phone was plugged in,download net framework 3.5 ,search for the version you need.in the search box here in xda download it to your computer,plug in your tp2 to the computer make sure you have an active sync connection,then open the netframework file on your computer and it will install net framework on your phone,if you have done this do it again then redownload the games,put them on your phone,maybe install on device instead of storage card then try again,hopefully that works or maybe another program you have installed is in conflict with it,or maybe the rom you have isnt compatable
perhaps something you downloaded is in conflict or the games are not compatable with a touch screen
I'm trying to install the .net compact framework 3.5 on my tp2 but i always get the message "installation of Microsoft .NET CF 3.5.CAB was unsuccessful."
i have synced the tp2 with my laptop and i run the installation program on the laptop.