Hello,
I want to cook my own ROM. After I read many many sites at this forum, I found a 'polaris kitchen 1.3' that seems to be good for me.
I want to use the original WM6.1 O2-ROM as base for my 'new' ROM.
My target is the original ROM without some progs (O2 specific) an also without tomtom, 'Erste Schritte' (First Steps) and opera.
I want to add MyMobiler, and some other cabs. Also, I want to make some registry corrections.
These steps I made:
1. Extract the Updatefile with 7Zip and got the neccassary file 'RUU_signed.nbh' as I understand correctly.
2. Extract the 'RUU_signed.nbh' with this command
Code:
NBHextract.exe RUU_signed.nbh
Now, I have these files
- '00_Unknown.nb', <== Radiofile (Thanx to ianl8888)
- '01_SPL.nb', <== ???
- '02_MainSplash.bmp', <== O2 BootSplashScreen Bitmap
- '02_MainSplash.nb' <== ???
- '03_OS.nb' <== OS file which we need to split
Question1: Do I need only the '03_OS.nb'? What do i need the other files for?
3. I used this command to split the nb-File '03_OS.nb'
Code:
NBSplit.exe -kaiser 03_OS.nb
I got this:
- '03_OS.nb.payload'
- '03_OS.nb.extra'
Question2: Is it OK to use the parameter -kaiser? Remember, I will create a orbit2/polaris ROM
Question3: What are this files for?
4. now I used this command
Code:
imgfsfromnb 03_OS.nb.payload imgfs.bin
to build the 'imgfs.bin' file
5. with the following command I've created a 'dump' folder
Code:
imgfstodump imgfs.bin
This dump folder include many subfolders and files
6. I start the package tool 'PKGTool.exe' an selected the dump-Folder
The output:
Code:
[Selected Path]
C:\Extracted ROM\dump
[Core OS]
Windows Mobile-based Pocket PCs
[Versions]
SYS: 5.2.19965.1203
OEM: 3.13.0.0
OEM: 0.0.1.0
SYS: 5.2.19958.1200
NET: 2.0.7045.0
OEM: 29.6.31301.207
OEM: 29.3.31301.207
[Language]
0407 - German (Germany)
[DPI]
96
[Certificates]
CN=Microsoft Windows Mobile PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
CN=OEM_UpdateCert
CN=O2___102
[Missing Manifests]
d92a4f0a-378a-4482-8fd3-bd127a05e4de.dsm
723fb954-d931-4348-b672-82a188e587b5.dsm
3346da5d-3675-4a67-925e-75f623184bda.dsm
98af2d70-895d-99af-0ffc-ede71fc1186d.dsm
75bcb9fa-30b9-8705-5d86-11acd2e2c1b1.dsm
Question4: Everything OK till now?
7. Now I've selected 'tool' - 'build packages'
Inside the dump folder, I've only two subfolder 'SYS' and 'OEM'
Maybe this is the next step ... (Thanx to ianl8888)
8. Now we must dump the 'xip.bin' with this command:
Code:
RomMaster.exe 03_OS.nb.payload -w 5 -b 0x00310000 -x -o xip.bin
[The syntax recorded in the how-to page had left out the suffix "payload" ]
So I have a XIP.BIN about 3.3Mb which XIPPort.exe has dumped into \Out\Files & \Out\Modules
Question5: What to do next?
Hi,
that is exactly the same I wanna do. After you have the SYS and OEM folder the next would be to re-create the ROM folder for your kitchen. We need a new XIP. That is the point where I don't know how to continue. I have already tested to replace the original SYS and OEM with those versions I build via dumping the new O2 Germany ROM. But after trying to rebuild and flashing the ROM with the kitchen the ROM won't boot.
Therefore I asked the chefs at http://forum.xda-developers.com/showthread.php?p=2657634 to help me.
Hopefully we can take a step further.
Tom
I have already managed to build a new german rom based on the
O2 GER 3.13 released some days ago and I used the XIP 20743 from
Shayders thread to build. Had no errors in cooking but I did not
flash yet because of maybe wrong location of XIP files in the ROM.
But I have another problem with HTC ROM Tool when trying to cook
the radio 1.59.42.15 (or any other) in the ROM. The tool always states:
"The size of this file is greater than default. Do you want to assign this file?"
I said yes and it builds the rom but now I don't know if it would work
because of the warning. I tried different radio.nb files and all of them
are 17MB and all of them give the error in HTC ROM Tool when assigning
them... Is this normal?
Olioaglio
Orbitter2 said:
Hello,
6. I start the package tool 'PKGTool.exe' an selected the dump-Folder
The output:
Code:
[Selected Path]
C:\Extracted ROM\dump
[Core OS]
Windows Mobile-based Pocket PCs
[Versions]
SYS: 5.2.19965.1203
OEM: 3.13.0.0
OEM: 0.0.1.0
SYS: 5.2.19958.1200
NET: 2.0.7045.0
OEM: 29.6.31301.207
OEM: 29.3.31301.207
[Language]
0407 - German (Germany)
[DPI]
96
[Certificates]
CN=Microsoft Windows Mobile PCA, O=Microsoft Corporation, L=Redmond, S=Washington, C=US
CN=OEM_UpdateCert
CN=O2___102
[Missing Manifests]
d92a4f0a-378a-4482-8fd3-bd127a05e4de.dsm
723fb954-d931-4348-b672-82a188e587b5.dsm
3346da5d-3675-4a67-925e-75f623184bda.dsm
98af2d70-895d-99af-0ffc-ede71fc1186d.dsm
75bcb9fa-30b9-8705-5d86-11acd2e2c1b1.dsm
Question4: Everything OK till now?
7. Now I've selected 'tool' - 'build packages'
Inside the dump folder, I've only two subfolder 'SYS' and 'OEM'
Question5: What to do next?
Question6: Should I copy these folder to the kitchen?
Click to expand...
Click to collapse
I don't know how to proceed yet with the "re-building stage", but I think you are still 3 steps short of this, anyway:
we need the XIP.BIN file to use the XIPPORT.exe tool on for XIP Files\Modules. The XIP build no. I have extracted is 19965, but we are already at 20753 for the device-independent MS files
I do NOT yet know how to extract the XIP.BIN file for this. I have successfully extracted it from an Eten temp.dat file (nbh equivalent) but not for HTC ROM files.
So I think we need to do steps 7,8,9 (xip.bin, xipport, \out) yet. How to extract xip.bin ??
Then re-build with edits (whole new ball game)
Some ROM chefs (eg. Ervius, swtos, cs) are generous enough to help, I hope, as they have in the past.
ianl8888 said:
I do NOT yet know how to extract the XIP.BIN file for this. I have successfully extracted it from an Eten temp.dat file (nbh equivalent) but not for HTC ROM files.
So I think we need to do steps 7,8,9 (xip.bin, xipport, \out) yet. How to extract xip.bin ??
Then re-build with edits (whole new ball game)
Some ROM chefs (eg. Ervius, swtos, cs) are generous enough to help, I hope, as they have in the past.
Click to expand...
Click to collapse
OK, later edit:
I've figured out how to dump xip.bin
RomMaster.exe OS.nb.payload -w 5 -b 0x00310000 -x -o xip.bin
[The syntax recorded in the how-to page had left out the suffix "payload" ]
So I have a XIP.BIN about 3.3Mb which XIPPort.exe has dumped into \Out\Files & \Out\Modules
But now, when attempting "make pkgs", XIPPort.exe falls over with "could not load file or assembly" errors these tools are so prone to. A path problem (I think) that continually drives me up the wall. We need the "packages" from XIP.BIN to know which files are the OEM drivers etc specific to the Polaris.
So I'm at steps 7, 8 and 8.5 ... it's like pulling teeth
BTW, 00_unknown.nb is the radio file.
ianl8888 said:
I have successfully extracted it from an Eten temp.dat file
Click to expand...
Click to collapse
I already thought I knew your nickname from somewhere .
ianl8888 said:
OK, later edit:
I've figured out how to dump xip.bin
RomMaster.exe OS.nb.payload -w 5 -b 0x00310000 -x -o xip.bin
[The syntax recorded in the how-to page had left out the suffix "payload" ]
So I have a XIP.BIN about 3.3Mb which XIPPort.exe has dumped into \Out\Files & \Out\Modules
Click to expand...
Click to collapse
Seems to be step 8, thank you! If we are sure that this is the right way, I will insert this step8 into the first post.
But where can I find 'RomMaster.exe'? I've only the beta without the command '-b'.
BTW, 00_unknown.nb is the radio file.
Click to expand...
Click to collapse
I already inserted this into #1
I did it the following way and created a new rom without glitches.
Though don't know if it works because I don't dare to flash it
Thanks, I see that you provided a new XIP in packages
20753 in your new thread. So I decided to use this one with your kitchen and I would breakdown the
steps now with which I built my ROM. Could you
please confirm if I have done right?
1. Download and unrar Shayder kitchen with included (3,8MB) os.nb.payload and imgfs.bin (4,0KB)
http://forum.xda-developers.com/showthread.php?t=421444
(Post #8 in the thread)
2. Download and XIP 20753 from the new thread.
http://forum.xda-developers.com/showthread.php?t=427730
3. Put the extracted SYS and OEM folder from
dumped and packaged ROM of you choice into the Build folder
of the Shayder Kitchen.
4. Put the extracted MSXIPKernel and MSXIPKernelLTK
folder from Shayders XIP 20753 into the SYS folder which
was before copied into the Build Folder.
5. Start ROM.bat in the kitchen
6. Select "1 - Build"
7. Select "1+2+3+4+5" in the next screen
8. Select "0" to let it run
9. Click the green button in the Build tool
10. Close Build tool when run ready
11. Wait to finish the nbh and enjoy!
I did so and got the ruu_signed.nbh file
ready to flash... think no need to XIPport etc.
but in fact I don't know exactly as I didn't flash my rom
Olioaglio
Olioaglio said:
I did it the following way and created a new rom without glitches.
Though don't know if it works because I don't dare to flash it
Thanks, I see that you provided a new XIP in packages
20753 in your new thread. So I decided to use this one with your kitchen and I would breakdown the
steps now with which I built my ROM. Could you
please confirm if I have done right?
1. Download and unrar Shayder kitchen with included (3,8MB) os.nb.payload and imgfs.bin (4,0KB)
http://forum.xda-developers.com/showthread.php?t=421444
(Post #8 in the thread)
2. Download and XIP 20753 from the new thread.
http://forum.xda-developers.com/showthread.php?t=427730
3. Put the extracted SYS and OEM folder from
dumped and packaged ROM of you choice into the Build folder
of the Shayder Kitchen.
4. Put the extracted MSXIPKernel and MSXIPKernelLTK
folder from Shayders XIP 20753 into the SYS folder which
was before copied into the Build Folder.
5. Start ROM.bat in the kitchen
6. Select "1 - Build"
7. Select "1+2+3+4+5" in the next screen
8. Select "0" to let it run
9. Click the green button in the Build tool
10. Close Build tool when run ready
11. Wait to finish the nbh and enjoy!
I did so and got the ruu_signed.nbh file
ready to flash... think no need to XIPport etc.
but in fact I don't know exactly as I didn't flash my rom
Olioaglio
Click to expand...
Click to collapse
I also did it this way. You're right, there is a ruu_signed.nbh after all that staff has finished. But the after flashing this ROM image to the orbit it won't boot. The splash screen is shown but nothing else happens.
I think this is caused by the XIP part.
Tom
tomduke99 said:
. But the after flashing this ROM image to the orbit it won't boot. The splash screen is shown but nothing else happens.
I think this is caused by the XIP part.
Tom
Click to expand...
Click to collapse
OK, what about the 20743 version as os.nb.payload version
as downloadable in Shayders XIP 20743 thread:
http://forum.xda-developers.com/showthread.php?t=424655
(the rapidshare link). This one does not have to be copied
into the SYS folder, but copied directly into the ROM folder.
I created a rom with this one with Polaris Kitchen 1.3.
Don't know if this would boot (didn't flash it either).
Orbitter2 said:
Seems to be step 8, thank you! If we are sure that this is the right way, I will insert this step8 into the first post.
But where can I find 'RomMaster.exe'? I've only the beta without the command '-b'.
Click to expand...
Click to collapse
1) Of course I'm not yet sure that this is the right direction. But I do know that if we want to upgrade the XIP build we have to sort the \OEM and \SYS "packages" from xip.bin. These directories contain OEM drivers specific to the device (here, Polaris)
Still cannot get XIPPort.exe to "make pkgs" although it works with an Eten X500 ROM
2) rommaster.exe is found (from my memory only) in any one of the Polaris or Kaiser kitchen files. It is a very old file, though - Nov 25, 2005. You can also find it in Shayder's kitchen on the front page of this sub-forum
Perhaps there's a later version of a "rommaster.exe" somewhere ?
Olioaglio said:
OK, what about the 20743 version as os.nb.payload version
as downloadable in Shayders XIP 20743 thread:
http://forum.xda-developers.com/showthread.php?t=424655
(the rapidshare link). This one does not have to be copied
into the SYS folder, but copied directly into the ROM folder.
I created a rom with this one with Polaris Kitchen 1.3.
Don't know if this would boot (didn't flash it either).
Click to expand...
Click to collapse
If you are too unsure to test with flashing (I thought that was what HardSPL was for !!) then try to extract your own RUU_signed.nbh in full and see what you get.
ianl8888 said:
1) Of course I'm not yet sure that this is the right direction. But I do know that if we want to upgrade the XIP build we have to sort the \OEM and \SYS "packages" from xip.bin. These directories contain OEM drivers specific to the device (here, Polaris)
Still cannot get XIPPort.exe to "make pkgs" although it works with an Eten X500 ROM
Click to expand...
Click to collapse
later edit: I have XIPPort.exe "making pkgs" now. XIPPort needs to be in its own folder ( ?? )with the support dll's etc.
So now I'm at Step 9 (the unknown) with \OEM and \SYS "packages" for editing.
The base ROM I'm trying to edit is the recent release of the official HTC WM6.1 Polaris ROM. This ROM is not protected by "all-commands-to-one" etc and so is fully extractable and editable if I can figure out how.
I think the next step (likely 10 or 12 sub-steps in there) is to understand the DSM's, RGU's, HV boot files etc. There is a tool XIPAddrTools available on this sub-forum that I have some hope for in helping here
I am trying to do two things with this ROM:
1) replace the XIP device-independent files with an upgraded set (build 1995 to build 2073)
2) remove all the crap that HTC and other ROM cooks put into it - like Cube, Home, Office etc etc
In other words, I'm trying for a WM6.1, recent XIP build, very clean ROM
Maybe ...
ianl8888 said:
I think the next step (likely 10 or 12 sub-steps in there) is to understand the DSM's, RGU's, HV boot files etc. There is a tool XIPAddrTools available on this sub-forum that I have some hope for in helping here
Click to expand...
Click to collapse
There is a very useful "sticky" thread on some of this, started by udK.
Olioaglio said:
OK, what about the 20743 version as os.nb.payload version
as downloadable in Shayders XIP 20743 thread:
http://forum.xda-developers.com/showthread.php?t=424655
(the rapidshare link). This one does not have to be copied
into the SYS folder, but copied directly into the ROM folder.
I created a rom with this one with Polaris Kitchen 1.3.
Don't know if this would boot (didn't flash it either).
Click to expand...
Click to collapse
I just tested without any modifications of XIP. I used the original XIP (os.nb.payload, imgfs.bin) delivered within the Kitchen. Only copied the SYS and OEM from the O2 ROM to the kitchen and tried to build a ROM. Result is a non booting ruu_signed.nbh.
Tom
tomduke99 said:
I just tested without any modifications of XIP. I used the original XIP (os.nb.payload, imgfs.bin) delivered within the Kitchen. Only copied the SYS and OEM from the O2 ROM to the kitchen and tried to build a ROM. Result is a non booting ruu_signed.nbh.
Tom
Click to expand...
Click to collapse
My version attached. If someone wants to try...
It's a german light version of O2 3.13.207.0 ROM
without Cube, TTN, Opera, useless stuff.
With XIP 20743 cooked in as os.nb.payload with
Polaris Kitchen V1.3
No radio included. You will most likely have to flash
1.59.42.15 manually after installation of the rom.
Olio v1 GER (Rapidshare link)
Olioaglio
If been testing around with this thread and this one and made a successful rom, some how the xip files needs to be extracted, 3,4 MB is little low, cause the one i got was 3.8 MB.
I used buildos+package_tools-2.7.exe to build my package and htcrt.exe to build the rom. (i change model from KAIS***** to POLA***** to get working and flash able rom)
I will experiment more cause i need to convert raw dump to original rom for warranty
tomduke99 said:
I just tested without any modifications of XIP. I used the original XIP (os.nb.payload, imgfs.bin) delivered within the Kitchen. Only copied the SYS and OEM from the O2 ROM to the kitchen and tried to build a ROM. Result is a non booting ruu_signed.nbh.
Tom
Click to expand...
Click to collapse
Yes, the various Registry addresses change as the XIP build changes so we need to understand RGU's, DSM's etc. The uDk sticky is helpful
Because the kitchens require a "template" to re-build a ROM, I still believe that the most thorough method is to use the just-released WWE WM6.1 HTC ROM as this template. Extract it all, replace the XIP device-independent filesystem with a newer build, remove all the stuff you don't want from \OEM "packages" and re-compile.
This is struggle street maybe, but this jigsaw is a challenge.
I've downloaded a newer version from Shayder's kitchen (found here: http://forum.xda-developers.com/showthread.php?t=427962). There is another os.nb.payload template. With this version of the kitchen I was able to produce a working ruu_signed.nbh with the SYS and OEM folder from the new German O2 ROM. Encouraged by this result I then tried to change the Kernel parts from XIP 20753 and replace NETCF2 with NETCF3.5 - Result: working ROM with NetCF3.5. Many thanks to all guys helping me especially those who have developed Kitchen's, Tools etc.
At this point I have OS version CE OS 5.2.20753 but the Build is still 19965.1.2.3. Therefore the next step should be replacing the SYS parts with its equivalents from a newer Build.
Questions about this:
1. Can I use a SYS folder from another (newer) ROM without modifications?
2. How to build a ROM with German localization? Shall I only copy the language specific folders from the original ROM to the SYS-part of the new ROM?
3. Are there some other stuff? What about Registry settings for different languages?
....
I read so many threads but I'm still not sure what to do next.
Thanks.
Tom
tomduke99 said:
I've downloaded a newer version from Shayder's kitchen (found here: http://forum.xda-developers.com/showthread.php?t=427962). There is another os.nb.payload template. With this version of the kitchen I was able to produce a working ruu_signed.nbh with the SYS and OEM folder from the new German O2 ROM. Encouraged by this result I then tried to change the Kernel parts from XIP 20753 and replace NETCF2 with NETCF3.5 - Result: working ROM with NetCF3.5. Many thanks to all guys helping me especially those who have developed Kitchen's, Tools etc.
Tom
Click to expand...
Click to collapse
Yes, that's real progress.
BUT - list step-by-step exactly how you did it, please
This is the problem - many posts about being successful, very few listing the detail.
Hello all,
Is it possible to dump a .BIN rom ?
I've search before asking, but i did not find the answer. Thank you in advance.
Talonette said:
Hello all,
Is it possible to dump a .BIN rom ?
I've search before asking, but i did not find the answer. Thank you in advance.
Click to expand...
Click to collapse
To dump a .BIN ROM you need:
- OSNBTool
- XIDUMP
Run "OSNBTool -sp" on the .bin file once and you'll obtain a NB0, run it again and you'll obtain a NB. Run XiDump -B on the NB file and you will obtain the xip and imgfs dump .
Thank you very much
Perfcect answer, thread solved but opened if requires to ask more
Error while dumping the .bin ROM image using osKitchen Zero
i am getting an error while dumping the .bin ROM image using
osKitchen Zero v1.30.
osKitchen Zero uses OSNBTool; XIDUMP to dump a .BIN ROM.
The error description is attached as image.
Also the log file of the process.
It successfully extracts the original .bin ROM to folder
BIN to NB Conversion\
Rom.bin.BIN.NB0.OS.NB
Rom.bin.Footer
OS Sections\
imgfs.bin
uldr.bin
xip.bin
OS Sections Dump\
IMGFS\
OEM\
SYS\
While extracting the IMGFS.BIN it ends giving the error.
i am using the following ROM. Both the ROMs in the following post ends to the same error, couldn't complete the import process.
forum.xda-developers.com/showthread.php?t=579639
[sorry i cant write it as a link, its disabled for new user]
kindly suggest whats going wrong.
how can it be fully extracted w/o error.
I have cooked a few roms for my diamond using the HTC WM6.1 1.93 release as a base. But i'd like to try Titanium and I gather i'd need WM6.5.
I have downloaded OEM xip kernel, SYS_23563_192DPI_0409, SYS_23563_Common and SYS_23563_XIP.
Please could someone give me some idea of what to do with these folders.... I use EVK 12.5.8
rikpotts said:
I have cooked a few roms for my diamond using the HTC WM6.1 1.93 release as a base. But i'd like to try Titanium and I gather i'd need WM6.5.
I have downloaded OEM xip kernel, SYS_23563_192DPI_0409, SYS_23563_Common and SYS_23563_XIP.
Please could someone give me some idea of what to do with these folders.... I use EVK 12.5.8
Click to expand...
Click to collapse
first thing is port the SYS (common and DPI 192),unpack this two archives then useing the Packer.jar you will create a new SYS for youre build,next you will need some OEMDrivers(the touch.dll for WM 6.5) and a OEMXIPKernel (the nk.exe for WM 6.5) and last but not least the MSXIPKernel,in ROM/Shared (just create a new folder and copy the content of SYS_23563_XIP.
Thankyou so much for your reply.
I have just built my first wm6.5 rom and will attempt to flash in a minute.
The only thing i'm left slightly confused about is a few bits in the OEM folder.
OEM/DIAMOND/COMMON/OEMVERSION/mxipupdate_OEMVERSION_100.provxml
It reads "ROMVersion" value="1.93.401.2"" Surely I should have a second file for wm6.5?
Also in ROM/DIAMOND there were a load of files in the OEMXIPKernel I downloaded that wanted to overwrite some existing files.... namely info.txt, ROMHdr.bin, xip.bin, os.nb.payload.
I didn't let them overwrite but do I need to keep both sets of files?
rikpotts said:
Thankyou so much for your reply.
I have just built my first wm6.5 rom and will attempt to flash in a minute.
The only thing i'm left slightly confused about is a few bits in the OEM folder.
OEM/DIAMOND/COMMON/OEMVERSION/mxipupdate_OEMVERSION_100.provxml
It reads "ROMVersion" value="1.93.401.2"" Surely I should have a second file for wm6.5?
Also in ROM/DIAMOND there were a load of files in the OEMXIPKernel I downloaded that wanted to overwrite some existing files.... namely info.txt, ROMHdr.bin, xip.bin, os.nb.payload.
I didn't let them overwrite but do I need to keep both sets of files?
Click to expand...
Click to collapse
the part with the rom version, you can modified as you wish ,yo can put you're name in there(PS: dont modify the phones ID or things like that)...then,you don't need the info.txt files anymore,delete them(PS: don't delete them if you are trying to build a new XIP.bin).If it says to overwrite.overwrite them with the new ones.Because the xip.bin,os.nb.payload,and the ROMHdr.bin are the old build files.so you need to replace them with the new ones,but you need to make a backup,just to be shure...or if you dont have the xip.bin and also the os.nb.payload for the new build you have to create the xip.bin with XIPport.exe and then we use again the XIPport app to inplant the new created xip.bin in the OS.nb.payload...that its a little tricky even i can do it properly