Database Users

I-Go 2008 in Diamond Touch

Hi,
Is there anybody being succesfull in transferring the I-GO 2008 navigation software into Diamond Touch? I heard that it was possible and worked but I could not figure out how. I found in forums how to transfer the software to my PDA with Win mobile 5, but the same process was not succesfull with Diamond. My Rom is 1.93.479.3. The app would not finnish instalation and cannot be run after (it just would not start, though it appears in PROGRAMMS as if installed... Any advice?
Thanks.

Do you know why there is a search button in the upper bar?
http://forum.xda-developers.com/showthread.php?t=403325

ChiefmasterB said:
Do you know why there is a search button in the upper bar?
http://forum.xda-developers.com/showthread.php?t=403325
Click to expand...
Click to collapse
Now I found the button:_) Thanks mate, I was lost when I googled out a couple of non-related results.
I will read it
Thanx

I have it working on mine, email me for help.
[email protected]

I have installed Igo8 in my Diamond and it works. Then installation in device, you must copy igo8.exe from device to internal storage/igo8/ and start the application with it. excuse me for my english

delete anything within the [folders] key in sys.txt

UK Postcodes?
has anyone got postcodes working on iGo 8?
i have iGo running with UK maps, but can only search for places by address.
Cheers,

running iGo 8 on my XDA Diamond with original O2 Rom....
running fine with 3d terrain and buildings enabled....
GPS working without problem...search works by adress, poi...everything
only TTS suxx right now....
good ...small maps....(found no tomtom7 map for germany and the netherlands..so i used the 1GB version of western europe)
igo uses only ~360MB for maps (ger+ned) buildings poi speedcams etc....NIIICE

mugglesquop said:
has anyone got postcodes working on iGo 8?
i have iGo running with UK maps, but can only search for places by address.
Cheers,
Click to expand...
Click to collapse
you type postcodes in the CITY box mate

i've got full 7 digit postcodes in uk, BUT not for 2008.4 map only 2008.1

Igo8 will do 7 digit postcode
to get the 7 digit postcode search working in IGO8 do the following
1: download the postcode enabled map from here --> http://rapidshare.com/files/166750423/UnitedKingdom7PPC.rar.
2: after putting it in the map folder in your igo8.content/maps folder start the app
3: when running click find and in the box UNDER United kingdom, the one where you normally put the city put your post code, but (and this is important) you MUST put a space in it, eg DL17 2HR . if you try and put DL172HR you will only get as far as DL172 then it will jump to the 5 digit address.
I have this running on a Touch HD with full postcode search and it works a treat with 3D landscapes, looks very nice.
Have fun

IGO R8.3
majo551 said:
Hi,
Is there anybody being succesfull in transferring the I-GO 2008 navigation software into Diamond Touch? I heard that it was possible and worked but I could not figure out how. I found in forums how to transfer the software to my PDA with Win mobile 5, but the same process was not succesfull with Diamond. My Rom is 1.93.479.3. The app would not finnish instalation and cannot be run after (it just would not start, though it appears in PROGRAMMS as if installed... Any advice?
Thanks.
Click to expand...
Click to collapse
Hi,
I've installed and using the IGO R8.3 with my Touch diamond device. Use this sys.txt file Should work.

I have onCourse, and it's working but voice doesn't seem to work at all.
Want to try iGo. However, don't know where to get the required cabs/files, etc. Any help?

Tom Tom Working But!

I have amanged to get tomtom 7.450 and it is working, i have downloaded the free map of London and all is fine.
However i want to add additional maps and this is where i get stuck. I have TT6 maps and would like to use them, i know that others have got this to work. However i cant access using tom tom home as the latest version of TT Home does not recognise the TomTom version 7 on my HD.
Is there another way to load the TT6 maps from the DVD to the device?
Can i get TT Home to work to transfer the maps, i did hear that TT Home 1.5 may be the answer but i cant find any where to download it?
Any help much appreciated

warning on the TomTom website when ordering maps for Navigator 7:
Remark "Please note that maps for Navigator 7 are only compatible with devices that have this software pre-installed. Please ensure that you have Navigator 7 installed on your device before purchasing a map."
The maps for Navigator 7 are 8.15 maps.
TomTom v7 is not supposed to be running on a hTC touch HD
tomtom HOME 2.5 is the one you need to install maps for Navigator 7. you can download tomtom HOME from the tomtom website (one of the few items you can download for free)

I am using Tom Tom Home 2.5 and it tells me that i am using an incompatable version of Tom Tom Navigator for my device and thus i cant install anything, to be honest that is why i am looking to install the maps without using tom tom home, or using tom tom home 1.5 which appears may work with the HD

TT7 does not support TT6 maps,
install tt6 instead, simple.
wampots said:
I have amanged to get tomtom 7.450 and it is working, i have downloaded the free map of London and all is fine.
However i want to add additional maps and this is where i get stuck. I have TT6 maps and would like to use them, i know that others have got this to work. However i cant access using tom tom home as the latest version of TT Home does not recognise the TomTom version 7 on my HD.
Is there another way to load the TT6 maps from the DVD to the device?
Can i get TT Home to work to transfer the maps, i did hear that TT Home 1.5 may be the answer but i cant find any where to download it?
Any help much appreciated
Click to expand...
Click to collapse

TT6 Does not work on the HD, and i cant install the TT6 maps without being able to use TT Home

Can i ask if you have TOMTOM working on your HD:
What version of TT?
What version of the Maps?
Did you use TT Home and if so what version?
If you did not use TT Home how did you load the maps?
Sorry to be a pain but this is driving me nuts! and i really want to get this to work

I have been really stupid. I have installed TomTom7 9.10.9185 and it is working fine, I then purchased v8.15 maps for UK & Ireland but the link I have been sent just tells me to download through TT Home 2.5, which as you know isn't an option.
Is there anyway of downloading the maps that I have purchased from a direct link? Or can I get a refund?

ScarySquirrel
Look if it makes you feel better I have TomTom7 9.10.9185 running and Home 2.5.1.36 and as you know I have the westen map.
I downloaded the home of the tomtom site and set it to pocketpc.

MDAIIIUser said:
ScarySquirrel
Look if it makes you feel better I have TomTom7 9.10.9185 running and Home 2.5.1.36 and as you know I have the westen map.
I downloaded the home of the tomtom site and set it to pocketpc.
Click to expand...
Click to collapse
Where do I set it to PocketPC?

fastie said:
TT7 does not support TT6 maps,
install tt6 instead, simple.
Click to expand...
Click to collapse
There is TomTom7 9.10.9185 with a link on this forum that does run TT 6.75 maps. Look in one of the other several threads that have already been going on for weeks about TT.

ScarySquirrel said:
Where do I set it to PocketPC?
Click to expand...
Click to collapse
To be honest I dont remember.
Here is however what I do remeber.
There was a thread around that told you how to copy files onto your SD card that made Home think that you had a different version as a device (pass on whihc one but is one of those hardware boxes for your car).
I used this and it worked fine, so then Home said it needed to update, after doing that I scaned for devices and it found a pocket pc.
So try the scan for device whilest connected else see if you can find that thread. it was a long time ago, sorry, not trying to be an A** but I just cant remember.

MDAIIIUser said:
To be honest I dont remember.
Here is however what I do remeber.
There was a thread around that told you how to copy files onto your SD card that made Home think that you had a different version as a device (pass on whihc one but is one of those hardware boxes for your car).
I used this and it worked fine, so then Home said it needed to update, after doing that I scaned for devices and it found a pocket pc.
So try the scan for device whilest connected else see if you can find that thread. it was a long time ago, sorry, not trying to be an A** but I just cant remember.
Click to expand...
Click to collapse
No, that's useful mate, thank you. At least it gives me a direction to go in, I'll do some digging and see what I can find.

ScarySquirrel said:
No, that's useful mate, thank you. At least it gives me a direction to go in, I'll do some digging and see what I can find.
Click to expand...
Click to collapse
Does anybody already has a solution?
I'm interested in this, too.

I was starting to lose hope with this, if anyone does resolve please post it here

did you get this to work?

TomTom Home 1.5 worked great for me as it recognized the mircoSD card first in my Kaiser and then also a card in the HD. To locate TTHome 1.5 Google: fixya tomtom home 1.5. This then allowed me to move my 6.75 Western US States maps from one card/device to the other.
TT7.910.9185 works perfectly, thanks do Dr_S, found here: http://forum.xda-developers.com/showthread.php?t=432410&page=10

TOMTOM

Hi, did a search and nothing came up.
But just wondering where can i get the TOMTOM navigation software that works with the TP2 please??
also are there any sites specially for TP2/windows mobile apps??
thanks

AFAIK the Tomtom software is free, you only pay for the maps, but I could be wrong. I'm using 7.915.9196 which is VGA and works fine
I don't think there is any TP2 specific software on the market but there is loads of WM6 stuff
http://www.pocketpcfreeware.com/en/index.php is a place to start and handango

stunno said:
I'm using 7.915.9196 which is VGA and works fine
Click to expand...
Click to collapse
same here, no problems at all. already tookm a trip, relied on it, and trip went perfect

TomTom is shipped with some devices. But it's not freeware!
Beware you don't start talking warez here
TomTom just made TomTom 7 available on their website for PocketPC's.
TomTom works just fine on the Rhodium probably.

no GPS LAG?

TOM TOM software is not free. and will not currently work with TP2. well the home software dont work. So i cant get the map i purchased. And they wont refund as i was not using a licensed version of software so definitely not free and not officially working

purple8 said:
TOM TOM software is not free. and will not currently work with TP2. well the home software dont work. So i cant get the map i purchased. And they wont refund as i was not using a licensed version of software so definitely not free and not officially working
Click to expand...
Click to collapse
tom tom navigator works purfect on the TP2, have it on mine

Hi
I Have tomtom 7.450 installed on my tp2 and its working well for me.

yes but are they legal versions and work with the TOMTOm home

I had version 7.910.9185 which didn't install.
I have now installed 7.915.9196 but it is asking to activate the map and wants an activation code.
So I went to ttcode.com to get one and it needs the product code. I can't find the product code anywhere, tomtom.com myorders doesn't mention one and tomtom home just shows the map version.
As far as I can make out from tomtom's help version ttn7 onwards don't use product codes.
So how do I get the activation code?

Contact TomTom about that

tomtom again
Hey guys,
iam new here and from germany.
Last week i got my new TP2 (branded by T-Mobile, now called "MDA Vario V")
i tried to install following versions:
Mod Edit: NO MENTION OF WAREZ PERMITTED
so,
if i install the programm on my "phone-storage" i got the warning "BTTrayCE is not a valiued application..."
if i install it on my sd-card i got NO warnings.
but in every versions i got the problem that the software do not find my extractet maps. I searched for a long time and tried different folders, and now its 11:00PM and i dont have any nerves left
i hope somebody can help me and gimme a detailed instructure how to get my tomtom running.
so far,
mypTx

TomTom questions always walk a thin line with regards to legality. No discussion of maps will be permitted.

Opps sorry never mind

There should be a ttnavigator.bif file on the root of the storage card which you can open up in notepad and find the code in there...I think.

if you have live services like traffic and speed cameras then 7.915 is useless as you cannot enable traffic (bug). There is also a definate lag on the GPS side of things compared to my TYTNII. Tomtom at present do not officially support the TP2, although when i phoned them they were more than happy to assist. TTHome is not worth bothering with till they release a version that is compatible with it. I kept on getting errors about device id not matching even though you select to change it and TomTom had reset my account. Gave up in the end and have copied speed cameras manually and traffic is now working.

Managed to get Tomtom 6 working!
Hi,
Having just bought a Touch Pro 2 sim free - loving the device and just about got it set up the way I like it.
You can indeed install Tomtom 6 on it, but BEFORE you do I highly recommend you install a utility called WVGAFIX3. What it does is allow you to change the resolution on your TP2.
Change it to VGA (640x480), then install and run TomTom. It's a bit of a pain toggling between resolutions at the moment, but once a WVGA version of tomtom is released then problem solved.
Got the radio working thanks to the CAB on here, and the 1% batt driver!

robsamuel2k8 said:
Hi,
Having just bought a Touch Pro 2 sim free - loving the device and just about got it set up the way I like it.
You can indeed install Tomtom 6 on it, but BEFORE you do I highly recommend you install a utility called WVGAFIX3. What it does is allow you to change the resolution on your TP2.
Change it to VGA (640x480), then install and run TomTom. It's a bit of a pain toggling between resolutions at the moment, but once a WVGA version of tomtom is released then problem solved.
Got the radio working thanks to the CAB on here, and the 1% batt driver!
Click to expand...
Click to collapse
Why TT6? TT7.915.916 runs great on my Rhodium. No hassle with resolutions or anything.

Hi,
I tried to install TT Nav. 7 on my TP2, but it doesn't seem to work. I get a message dat TT7 is not compatible with my device. How did you guys got it to work?

Dear all,
It is posible to route Tomtom sounds to bluetooth headset or radio cd bt enabled as handsfree (as a phone call, only hear Tomtom when needed and till then carry on listening music)?
Thanks.

Has anyone gotten TomTom to work on this device yet?

I just got the T-Mobile USA version of the TP2. Here's my issue:
Ok, I have legal maps and software from when I purchased TT6 that I used with my P3300. I tried to use the same TT6 program on the TP2, but it screwed up my BT stack and it wouldn't run anyway. So I downloaded two different versions of TT7 (7.450 & 7.910) that will run, but neither of them can find my US & Canada maps. Is there a way to use TT7 with TT6 maps or is there another version of TT6 that will work with the TP2?
I also went to the TomTom website to see if I could buy new maps. They don't even give you an option to buy it if your phone didn't come preinstalled with TomTom. SUCKS!

TomTom 7.915 installed and working fine here with Western European maps.

andrewrees said:
TomTom 7.915 installed and working fine here with Western European maps.
Click to expand...
Click to collapse
I've got USA & Canada maps. Any way to tell the version of the maps you're using?
Nevermind. I found out how to make my TT6 maps work. This guy is golden!!!
http://belthur.blogspot.com/2009/08/getting-tomtom7-software-work-with.html

shawndh said:
I've got USA & Canada maps. Any way to tell the version of the maps you're using?
Click to expand...
Click to collapse
in the main screen -> click signal bar -> click version -> look for "Map"

Thanx for all the info guys. I'll def use it in the future, but I was able to get US & Canada maps, vers 660 recognizable with TT7.450 by changing the vers#, build#, and ID#. I also had to reregister my maps using my product code. I didn't have any problems after that.
FYI, I could not get some versions of TT7.910 to install as a CAB. Those had to be unbacked first. I did get TT7.450 to install with no problems, but I had to:
1) install it to the SD card first
2) hard reset my device (because the install screws up your BT stack on TP2)
3) then make my short cuts from the storage card
Now all is working fine. I just don't get update features and the better looking maps.

TomTom 7 indeed seems to mess up your BT stack. However removing the dlls it adds on installation fixes this issue, a hard reset is not necessary (I know this won't help you anymore, but it might benefit the next guy )
I've been using TT7 for a while now, it works perfectly and so does my bluetooth.
The files you need to remove/rename are:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
There, my first post. I'm new but I quite like this place already.

shawndh said:
I just got the T-Mobile USA version of the TP2. Here's my issue:
Ok, I have legal maps and software from when I purchased TT6 that I used with my P3300. I tried to use the same TT6 program on the TP2, but it screwed up my BT stack and it wouldn't run anyway. So I downloaded two different versions of TT7 (7.450 & 7.910) that will run, but neither of them can find my US & Canada maps. Is there a way to use TT7 with TT6 maps or is there another version of TT6 that will work with the TP2?
I also went to the TomTom website to see if I could buy new maps. They don't even give you an option to buy it if your phone didn't come preinstalled with TomTom. SUCKS!
Click to expand...
Click to collapse
also had issues w/ bluetooth after installing it, so i hard booted, currently using Garmin Mobile XT and it works great on my TP2

shawndh said:
I just got the T-Mobile USA version of the TP2. Here's my issue:
Ok, I have legal maps and software from when I purchased TT6 that I used with my P3300. I tried to use the same TT6 program on the TP2, but it screwed up my BT stack and it wouldn't run anyway. So I downloaded two different versions of TT7 (7.450 & 7.910) that will run, but neither of them can find my US & Canada maps. Is there a way to use TT7 with TT6 maps or is there another version of TT6 that will work with the TP2?
I also went to the TomTom website to see if I could buy new maps. They don't even give you an option to buy it if your phone didn't come preinstalled with TomTom. SUCKS!
Click to expand...
Click to collapse
I have TT7 working on my tmo tp2 but no voices, everything else works great.

Ekipsey said:
TomTom 7 indeed seems to mess up your BT stack. However removing the dlls it adds on installation fixes this issue, a hard reset is not necessary (I know this won't help you anymore, but it might benefit the next guy )
I've been using TT7 for a while now, it works perfectly and so does my bluetooth.
The files you need to remove/rename are:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
There, my first post. I'm new but I quite like this place already.
Click to expand...
Click to collapse
I could never find those dll files, so I just hard reset it.
Nice first post.

Ekipsey said:
TomTom 7 indeed seems to mess up your BT stack. However removing the dlls it adds on installation fixes this issue, a hard reset is not necessary (I know this won't help you anymore, but it might benefit the next guy )
I've been using TT7 for a while now, it works perfectly and so does my bluetooth.
The files you need to remove/rename are:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
There, my first post. I'm new but I quite like this place already.
Click to expand...
Click to collapse
I don't have those files... is that good or bad?

Gman65 said:
I have TT7 working on my tmo tp2 but no voices, everything else works great.
Click to expand...
Click to collapse
You should have a "voices" folder on the root of your storage card. If you can connect to TomTom Home on your desktop, you can down load them to your phone. Or you can find them on the net. They're not hard to come by. But you should check to see if your voices folder is on your storage card somewhere.

error, sorry

201reyes said:
also had issues w/ bluetooth after installing it, so i hard booted, currently using Garmin Mobile XT and it works great on my TP2
Click to expand...
Click to collapse
Were you able to copy the Garmin maps to another storage card or did you have to keep it on the storage card that came with the software? I was looking at buying the Garmin software but that uncertainty made me hesitant.

shawndh said:
I could never find those dll files, so I just hard reset it.
Nice first post.
Click to expand...
Click to collapse
Ow yes, you'd need something like Total Commander to view/remove .dll files in the /Windows directory. Neither the default WM Explorer or the W7 explorer when USB-linked could do that here.

TT7 works fine here, just some GPS lag and hardware keyboard adds some weird 'a' character after each normal character.
Had BT troubles with some older version, downloaded the latest I could find and had no troubles at all.

shawndh said:
You should have a "voices" folder on the root of your storage card. If you can connect to TomTom Home on your desktop, you can down load them to your phone. Or you can find them on the net. They're not hard to come by. But you should check to see if your voices folder is on your storage card somewhere.
Click to expand...
Click to collapse
No luck connecting with home, and i do have the voices folder in the root of the mem card. I also tried placing the voices folder on the device in the navigator folder... still no luck, but thanks for the help

Got TomTom 7.915 working fine on TP2, with no issues with BT. Australian and US/Canada maps installed. Installed onto device, with maps on SD card. With voice working.

i have tt7 working for me, here is what I did.
installed tt7 to my sd card then hard reset (because i have all sorts of problems with the bluetooth)
copy my voices files to sd card\program files\navigator\voices
my maps are in the root of the sd card
then use total commander to create a short cut to the program.
I havent had anymore problems at all and it works first time I have flashed my phone 6 times so far and I dont have to reinstall it.
I hope this helps someone here

I read the issues with TT7 so tried to do Garmin XT - City Navigator 2010.10 install. I have it working successfully with Voice, Traffic and Fuel prices.
BTW, I am newbie unlike most people here
=ShyGuyCalif

Worked !!! Great !!! Just renaming BtSdkCE30.dll, BtCoreIf.dll and all is back again
Ekipsey said:
TomTom 7 indeed seems to mess up your BT stack. However removing the dlls it adds on installation fixes this issue, a hard reset is not necessary (I know this won't help you anymore, but it might benefit the next guy )
I've been using TT7 for a while now, it works perfectly and so does my bluetooth.
The files you need to remove/rename are:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
There, my first post. I'm new but I quite like this place already.
Click to expand...
Click to collapse
I'm tne next guy!!! Thanks !!! Worked !!! Great !!! Just renaming BtSdkCE30.dll, BtCoreIf.dll and all is back to normal again

TomTom on this phone?

How do I install TomTom on this phone? I have tried to install from a cab file that I used successfully on a Touch Pro but the installation fails on the Touch2 reporting the application as incompatible.
Can you please point to a TomTom cab file that works with WM6.5?
Even better if it is a version where I can activate a free local map as in fact that's all is need on this phone....
Thanks.

There are certain sources that provide QVGA cabs, google is your friend.

The QVGA version easily found googling has problems with WM6.5: it screws the Bluetooth stack.

Ah that explains why my bluetooth isnt working anymore, well Navigation is more useful then bluetooth for me.

http://forum.xda-developers.com/showpost.php?p=4898541&postcount=8
Do this and both bluetooth and tomtom will work.

i didn't have a problem with tomtom 7 installing on the htc touch 2 aka mega.
I even got it working with my external gps. so bluetooth doesn't stop working with my cellphone. I will try tomtom 7 + bluetooth external GPS + Bluetooth earphone this evening to test if even that will work

After installing TT7 just delete these 2 files BtSdkCE30.dll & BtCoreIf.dll from Windows directory. Bluetooth stack will work again

Touch2 Tomtom screenshot
Can any post a screenshot of Tomtom on the Touch2 please.
I'm thinking of buying this phone but i'm afraid the screen will be too small for tomtom.
Would be much appreciated.

From the small test i did, it works fine although it seems to suffer a small lag, it remembered my previous diamond, ...
Here a screenshot i've take inside my home, for me the visual it's good ( not awesome but still good )

Good enough to use. Bought this phone. Loving it more the more i use it.
Thanks for the trouble making the screen. xx

tomtom works fine on my HTC with MEGA:
tomtom navigator 7910
Wester Europe

Please, how to delete those 2 files
gl0b said:
After installing TT7 just delete these 2 files BtSdkCE30.dll & BtCoreIf.dll from Windows directory. Bluetooth stack will work again
Click to expand...
Click to collapse
Hi,
I have a hard time to find those 2 files in windows directory.
please help

bob8x said:
From the small test i did, it works fine although it seems to suffer a small lag, it remembered my previous diamond, ...
Here a screenshot i've take inside my home, for me the visual it's good ( not awesome but still good )
Click to expand...
Click to collapse
You can make the visual map screen bigger by selecting less elements in the statusbar....I use only remaining distance, arrival time and speed.....
Also the colorscheme you use makes quite a difference in visibility...can recommend you "default contrast" for the day and Vapno for the night. Via TomTom website many many schemes available.

jasontran2010 said:
Hi,
I have a hard time to find those 2 files in windows directory.
please help
Click to expand...
Click to collapse
Just install Total Commander, and browse your Windows directory to delete those files.
Easy

Trouble installing Navigator 7
I have a Touch 2 with Windows 6.5 and recently bought Tomtom Navigator 7 on a memory card from Handtec. I had trouble getting it to install so here are my notes & instructions which I hope will help others in future.
The Tomtom web site says that the Touch 2 is compatible with Navigator 7 but when I tried to install the software it said my device was incompatible with the version of software. Strangely, given that Navigator 7 is supposed to be new, the newest “modified” date of any of the software on the memory card is June 2009, more than a year ago.
I logged a question with Tomtom support after logging into my account on their web site. After asking me to send them a copy of my invoice for purchasing Navigator 7 they said there was a software update ttn7.zip which I could download from the web site. The support response was very prompt – less than half an hour – but their installation instructions were poor and it took several rounds of questioning to figure out what actually had to be done.
I had copied the contents of the Tomtom memory card on to my own card. The correct instructions for the update are as follows:
- with ttn7.zip downloaded from Tomtom and on the PC, click on it in Windows Explorer to display the contents.
- This is a folder called ttn7. Click on it again in Windows Explorer to display the contents.
- You will see two items – start.exe and a folder called “2577”
- Delete the existing folder “2577” on the memory card (which had been copied from the Tomtom memory card earlier
- copy the new “2577” folder from the Tomtom download on to the memory card so it takes the place of the old “2577”
- there is no need to copy start,exe as a version with the same date is on the memory card
- With the Touch 2 off, load the memory card
- Power the Touch 2 on.
- During the power up process the Tomtom software will auto-install
- Worryingly my Touch 2 gave the same old warning message that the device is incompatible with the version of the Navigator but the installation process ignored this and carried on.
- Tomtom will prompt for the usual installation questions including the activation code that came on a sheet of paper with the memory card
- From now on it’s a case of answering the questions and configuring the various options to taste. Navigator 7 seems to work fine although I haven’t taken it out in the car yet.