Hi Guys,
I am having a "little" problem, no matter what i do i can't turn the WIFI on, i am not sure but i think that something happened when i updated my radio from 1.14.25.25 to 1.17.25.09, have tried to downgrade the radio and rom to many different versions, but i can't get the WIFI to work, i hope someone has a solution to this problem........Thanks!!!!!
Current:
Device: Touch HD
Rom: miri WM6.5 21885 v/manila v2.5 REV15
Radio: 1.17.25.09
HSPL: Olinex 1.56
Protocol version: 52.69.25.37U
Regards, Vallia
Vallia said:
Hi Guys,
I am having a "little" problem, no matter what i do i can't turn the WIFI on, i am not sure but i think that something happened when i updated my radio from 1.14.25.25 to 1.17.25.09, have tried to downgrade the radio and rom to many different versions, but i can't get the WIFI to work, i hope someone has a solution to this problem........Thanks!!!!!
Current:
Device: Touch HD
Rom: miri WM6.5 21885 v/manila v2.5 REV15
Radio: 1.17.25.09
HSPL: Olinex 1.56
Protocol version: 52.69.25.37U
Regards, Vallia
Click to expand...
Click to collapse
Have you tried a hard reset?
Try going to settings/connections/wifi/advanced/power mode and put it in the middle (or on Best Performance).
Also try checking your network settings. go to advanced config (normally found in Utilities folder), then collapse the Network option and verify your connection settings.
Related
I have just upgraded from bepe .67 to Phuangquang (Diamond).....
It all went swimingly until The Radio Rom will not install. I am meant to have 1.58.25.14
My device says I have the 1.58.21.23......
The protocol version on my device is 25.65.30.04H anf I am meant to have 25.69.30.05H - does this make difference please?
Any suggestions all of the bepe stuff worked - should I return back to that one?
Kind Regards,
Will
The protocol numbers comes with the radio rom, so if you changes radio the protocol number will change too. So dont bother about that!
Hi, I am new to this, but I'm curious and wanna play.
I have tried to flash my HD2 with the following ROM's:
Artemis HD2 ROM Family Ver 15.5
ChuckyROM-23569-Tabtastic.May.17
I have SPL-1.66.HSPL
I have installed the radio "Leo_RADIO_15.36.50 .07U_2.09.51.03"
The flashing goes fine. It boots the first time. Great. And then it does a restart and it freezes. And all I see is HTC. Where am I going wrong, and what do I still need to do.
Nevermind.
I got my first flash done! All I needed was SPL 2.08.HSPL.
nothing to do with hspl.
chucky is a 576 enabled rom so needs a matching radio... I.e one with version ..50.. and not ..51..
it says so in the first post of chucky thread.
samsamuel said:
nothing to do with hspl.
chucky is a 576 enabled rom so needs a matching radio... I.e one with version ..50.. and not ..51..
it says so in the first post of chucky thread.
Click to expand...
Click to collapse
Before installing Chucky, I made sure I am going to flash the correct Radio version. Later I installed 2.09.51.03_2. Still, I had no luck when I tried a different ROM. I had the same problem. So the problem was me. Then I played around. I changed from 1.66.HSPL to 2.08.HSPL, and suddenly everything worked.
But thanks, I can see why you guys gets addicted to flashing.
OS: 5.2.3569
Manila: 2.5.20121412.1
ROM: ChuckyROM WWE
Radio: 2.09.51.03_2
Protocol: 15.36.50.07U
make sure you back-up your stock rom....heheheheeheh
have you done soft reset since you flashed? cos you are still saying you are using radio x.x.51.x when chucky explicitly says you need x.x.50.x
but anyway, you're working now so it doesn't matter, but just for info of it hangs at grey screen that's why.
Before anyone asks I have spent a few days researching this and it just should work.
This is my first time trying Android so this may be a newbie problem but I don't think so.
When i try to boot Android I don't get any error but this just stays on the screen in very small writing. My Rom size is 512k
HaRET boot
Shutting down hardware
Turning off MMU
In preloader
PSR=600000df
Tags relocated to 0x11800100 (size 0x00000f00)
Kernel relocated to 0x11808000 (size 0x00211190)
Initrd relocated to 0x12200000 (size 0x001d0210)
Jumping to Kernel (cuStom)...
I have even left it 20 minutes
History of what I have tried
1) Stock T-Mobile UK 1.72 image
Tried the above with Froyo 1.7 and 1.8 (latest)
2) Re-imaged my HD2 with 1.72 again (just to have a clean start)
Tried Froyo 1.8 - same problem
3) Re-imaged my HD2 with Artemis 41 - lates
Tried Froyo 1.8 - no luck
Pulled down
Mdeejay_FroYo_Sense_v._2.3_Clean_#15
Still no luck
Setup
====
I used HSPL 2 as my HD2 was SPL 1.66
I think HSPL is working or I would not have been able to flash Artemis
When loading any of the Android images I just unpack and put the Android folder (nothing else) in the rood of the SD card.
I have tried both my 16gb card and a 2gb.
Setup when using T-Mobile UK 1.72
===========================
HSPL 2
Manila Version 2.5.20121429.0
ROM Version: 1.72 110.4 (86586525) WWE
Radio Version: 2.07.51.22_2
Protocol Version 15.32.50.07U
Setup on Artemis
=============
HSPL 2
Manila Version 2.5.20191914.0
ROM Version: 41.0 WWE
Radio Version: 2.07.51.22_2
Protocol Version 15.32.50.07U
I really would like to have Android working on this machine so any help would be very much appreciated.
that what u got Radio Version: 2.07.51.22_2
that what u need Radio Version: 2.08.50.X minimum
TonyOCL said:
Before anyone asks I have spent a few days researching this and it just should work.
This is my first time trying Android so this may be a newbie problem but I don't think so.
When i try to boot Android I don't get any error but this just stays on the screen in very small writing. My Rom size is 512k
HaRET boot
Shutting down hardware
Turning off MMU
In preloader
PSR=600000df
Tags relocated to 0x11800100 (size 0x00000f00)
Kernel relocated to 0x11808000 (size 0x00211190)
Initrd relocated to 0x12200000 (size 0x001d0210)
Jumping to Kernel (cuStom)...
I have even left it 20 minutes
History of what I have tried
1) Stock T-Mobile UK 1.72 image
Tried the above with Froyo 1.7 and 1.8 (latest)
2) Re-imaged my HD2 with 1.72 again (just to have a clean start)
Tried Froyo 1.8 - same problem
3) Re-imaged my HD2 with Artemis 41 - lates
Tried Froyo 1.8 - no luck
Pulled down
Mdeejay_FroYo_Sense_v._2.3_Clean_#15
Still no luck
Setup
====
I used HSPL 2 as my HD2 was SPL 1.66
I think HSPL is working or I would not have been able to flash Artemis
When loading any of the Android images I just unpack and put the Android folder (nothing else) in the rood of the SD card.
I have tried both my 16gb card and a 2gb.
Setup when using T-Mobile UK 1.92
===========================
HSPL 2
Manila Version 2.5.20121429.0
ROM Version: 1.72 110.4 (86586525) WWE
Radio Version: 2.07.51.22_2
Protocol Version 15.32.50.07U
Setup on Artemis
=============
HSPL 2
Manila Version 2.5.20191914.0
ROM Version: 41.0 WWE
Radio Version: 2.07.51.22_2
Protocol Version 15.32.50.07U
I really would like to have Android working on this machine so any help would be very much appreciated.
Click to expand...
Click to collapse
I had the same problem when I had following configuration
================================
OS 5.2.21869(21869.5.0.82)
Manila Ver: 2.5.19211619.0
ROM Version: 1.48.720.2 (71294)WWE
ROM Date: 11/25/09
Radio Version: 2.05.51.05_2
Protocol Version: 15.28.50.07U
==================================
I upgraded to version ROM 3.14.720.3 (04666)WWE and now I'm able to boot Darkstone FroyoV3
Following is my current configuration
================================
OS 5.2.21913(21913.5.0.94)
Manila Ver: 2.5.20181527.0
ROM Version: 3.14.720.3 (04666)WWE
ROM Date: 10/08/10
Radio Version: 2.15.50.14
Protocol Version: 15.42.50.11U
================================
Hope this help Thanks to Darkstone for superb work...
I upgraded to Artemis... thought the radio would be upgraded too..
Can somone point me to how to upgrade radio only . or firmware upgrade with correct radio.
Honest I am not being lazy.. just want to get it working quickly...
I have tried all weekend honest ;-)
pretty please ;-)
Thanks in advance
Radio is the same as flashing a Rom but it won't wipe the device. Download radio, put phone into bootloader, connect usb then run the exe
Sent from my HTC HD2 using XDA App
cd78 said:
Radio is the same as flashing a Rom but it won't wipe the device. Download radio, put phone into bootloader, connect usb then run the exe
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thanks very much....Radio update and Android running...off to play ;-)
I need to update my radio version to allow Android to run (I Believe)
My version is
Setup when using T-Mobile UK 1.72
===========================
HSPL 2
Manila Version 2.5.20121429.0
ROM Version: 1.72 110.4 (86586525) WWE
Radio Version: 2.07.51.22_2
Protocol Version 15.32.50.07U
I have updated the rom to Artemis 41
Setup on Artemis
=============
HSPL 2
Manila Version 2.5.20191914.0
ROM Version: 41.0 WWE
Radio Version: 2.07.51.22_2
Protocol Version 15.32.50.07U
But now I still believe I need to update the Radio to at least 2.08.
Can someone tell me if this is possible and if so when I can get the necessary Radio file?
Thanks in advance
TonyOCL said:
I need to update my radio version to allow Android to run (I Believe)
My version is
Setup when using T-Mobile UK 1.72
===========================
HSPL 2
Manila Version 2.5.20121429.0
ROM Version: 1.72 110.4 (86586525) WWE
Radio Version: 2.07.51.22_2
Protocol Version 15.32.50.07U
I have updated the rom to Artemis 41
Setup on Artemis
=============
HSPL 2
Manila Version 2.5.20191914.0
ROM Version: 41.0 WWE
Radio Version: 2.07.51.22_2
Protocol Version 15.32.50.07U
But now I still believe I need to update the Radio to at least 2.08.
Can someone tell me if this is possible and if so when I can get the necessary Radio file?
Thanks in advance
Click to expand...
Click to collapse
Hi,
I think, if what you have posted is correct, that you have made a little mistake. Artemis' new roms have great problems with HSPL. You must flash using SSPL as described here.
All Leo's radio can be found here. Be careful to use the right radio for your phone. The last 2.15.50, if you have an european version of HD2 it's right. If you have a T-mobile 1GB ram I don't know,
TonyOCL said:
I need to update my radio version to allow Android to run (I Believe)
My version is
Setup when using T-Mobile UK 1.72
===========================
HSPL 2
Manila Version 2.5.20121429.0
ROM Version: 1.72 110.4 (86586525) WWE
Radio Version: 2.07.51.22_2
Protocol Version 15.32.50.07U
I have updated the rom to Artemis 41
Setup on Artemis
=============
HSPL 2
Manila Version 2.5.20191914.0
ROM Version: 41.0 WWE
Radio Version: 2.07.51.22_2
Protocol Version 15.32.50.07U
But now I still believe I need to update the Radio to at least 2.08.
Can someone tell me if this is possible and if so when I can get the necessary Radio file?
Thanks in advance
Click to expand...
Click to collapse
Sir first of all go back on the Artemis thread. If you mention to have Artemis ROM v41.0 and HSPL!!! You missed some important informations.
First of all Artemis ROM v41 Is build on latest Stock ROM 3.14!!!
And Stock Rom 3.14 isn't compatible with HSPL!!!
So first of all; tern back on previous stock rom
- remove HSPL!!!!
- install stock ROM 3.14
- and than install Artemis Rom v41.0!!!
More info can be find on first page of Artemis ROM.
Ow, on's you have done all this (correctly) you don't need to have a other radio version. the radio version of Sock Rom 3.14 is compatible with Android; also Artemis ROM v41.0 is compatible.
unvisigoth said:
Hi,
I think, if what you have posted is correct, that you have made a little mistake. Artemis' new roms have great problems with HSPL. You must flash using SSPL as described here.
All Leo's radio can be found here. Be careful to use the right radio for your phone. The last 2.15.50, if you have an european version of HD2 it's right. If you have a T-mobile 1GB ram I don't know,
Click to expand...
Click to collapse
It isn't Artemis ROM who have problems with HSPL sir.
The problem is that latest Artemis version is build on Stock Rom 3.14; the one who isn't compatible with HSPL!
PS, you can't change Radio version from Stock Rom 3.14! because you need HSPL (the one who isn't compatible with spl 3.03)
Hi Kurt,
I read the Artemis and didn't see that it wasn't compatible with HSPL 2. I read this
http://forum.xda-developers.com/showthread.php?t=612580
I still have HSPL running and Atemis and when I upgraded the radio now Android is running, but the radio functions are not too stable, so looking to find the correct radio.
Thanks for your help.
TonyOCL said:
Hi Kurt,
I read the Artemis and didn't see that it wasn't compatible with HSPL 2. I read this
http://forum.xda-developers.com/showthread.php?t=612580
I still have HSPL running and Atemis and when I upgraded the radio now Android is running, but the radio functions are not too stable, so looking to find the correct radio.
Thanks for your help.
Click to expand...
Click to collapse
its not the radio making it unstable, it is hspl plus a 3.x ROM.
go look at your free program memory, bet it says about 50mb,, it should be around 170
TonyOCL said:
Hi Kurt,
I read the Artemis and didn't see that it wasn't compatible with HSPL 2. I read this
http://forum.xda-developers.com/showthread.php?t=612580
I still have HSPL running and Atemis and when I upgraded the radio now Android is running, but the radio functions are not too stable, so looking to find the correct radio.
Thanks for your help.
Click to expand...
Click to collapse
Pleas sir, I have the impression you don't read; ore you don't see it.
Ow, This is nothing from me; but this is mentioned from the beginning at the Artemis First Page thread!!
NOTE 5 : Please use ver 4x.x GEN IV with SPL 3.03.0000 from stock LEO-S 3.14
Click to expand...
Click to collapse
In case you miss it; SPL 3.03 is not the same as HSPL
No offence, I don't have anything against you, but it seems sometime peoples have problems to read.
Hi all,
I'm trying to flash a friends HTC HD 2 after succesfully having Android on my own. The problem is that the ROM version on his HD 2 is different from my own and I can't find any way to update the 1.66.404.1 version or to get a lower version like 1.66.0000 or lower to get hardSPL on it. HSPL3 does install and do give al the correct reports during install, but after rebooting, there is still that annoying Rom 1.66.404.1!
Manilla: 2.5.19211619.0
Rom: 1.66.404.1 (76641) NLD
Rom date: 01/14/10
Radio: 2.06.51.07
Does anybody have any idea?
P.S. ( probably a known issue, but i searched for an hour now and found nothing on this forum about it. if so, sorry )
Hi Glideboy,
First of all which rom version is on your own HD2?
An HSPL overwrites the existing SPL so you can flash different roms from another carrier or cooked roms. The 1.66 rom version stays also after flashing an HSPL.
I see that you're a new member here and don't want to give you to much difficulties because if somehting is going wrong you can brick the device.
So if you want to run android you need a 3.14 based rom (check HD2 rom thread) and also a good radio for example 2.15.
Easiest way is to flash the official HTC 3.14 rom with the newest drivers and radio already in it.
The phone is having a HSPL already so now you can flash every rom you like with the customruu. Check the HD2 rom thread, read carefully and after that you can run a nice android build.
Good Luck