Related
Here goes.
I bought a Magician a few months back. Hated the lack of space but liked the Bluetooth functionality. I could connect wirelessly around the house no problem. Sending/receiving files to/from anyone with a Bluetooth device.
Decided to proceed with BigStorage ROM Flash. Flash succesful. Enjoyed adequate space. Hated Bluetooth. I tried to get some help in this forum but the help extended wasn't exactly too successful. I was missing the [`Bluetooth] option in ActiveSync [a registry key I believe], and I couldn't send/receive files. I decided to give up on it until I had enough time to retrieve the registry key by reflashing with shipped ROM and flashing back to BigStorage.
I found the time to do it last week. Flashed and reflashed several times [every single attempt was successful], checking and rechecking for the Bluetooth registry keys. Yet I couldn't find them.
My Magician can still detect Bluetooth devices so I'm sure the hardware isn't busted. But I can't even transfer files using Bluetooth. Tried installing that Bluetooth Stack from http://forum.xda-developers.com/viewtopic.php?t=33532. Added some new features, but functionality is as stated in this paragraph.
Help? ::crycry:: hahahaha
I am now totally clueless as to how to go about this predicament..
EDIT
I've recently did the BigStorage ROM on my Magician. And everything was just peachy. Up until I tried to sync my Magician to the PC via Bluetooth.
Before I did the ROM patch, I was able to sync my unit through Bluetooth after some few hours of tweaking my system. But after I did the patch, I tried to sync it again through Bluetooth. My PC was waiting for the Magician but the unit kept disconnecting itself.
I ran Activesync on the Magician, went to its settings, and the Bluetooth option was gone. Only `USB was left along with some numbers (baud rates?), when previously it had `Bluetooth as well.
I'm sure Bluetooth works (as I've installed the CAB associated with it from the ExtRom) on the unit since it can make a device pairing and ask for a passkey and all that, but syncing through Bluetooth doesn't work anymore.
Could anyone shed some light on this for me?
Click to expand...
Click to collapse
try pairing your device to the pc! make sure that ur pc is not listed on the magician paired devices, activate the pairing from the magician through bluetooth under settings system tab through "Bluetooth ActiveSync Setup" and go from there.
let me know how you go!
errr.. ok i tried what you suggested. and i'm starting to wonder..
now my device can't see and can't be seen. i can't make a pair anymore even from the pc. my unit says 'no new devices found' yet my pc is discoverable.
broken bluetooth radio maybe (but it was working before the patch...)? or could it be a cab file i missed?
Hi i'm only new myself but you could try a soft reset then retry pairing your device, or a hard reset and see if the bluetooth works then? or maybe even try the cab file on
http://forum.xda-developers.com/viewtopic.php?t=33532
I have found that worst case senario a hard reset and look for the right bluetooth cab to install from the ext rom.
run a search on this site for ext rom and look for the post with details about each of the seperate files and what they do!
*Edit* i did a quick search and i wasnt able to find anything in the ext rom that applies to bluetooth setup or settings! so i guess a hard reset maybe the best way to find out whether is software or hardware?!!
Maybe one of the more experienced guys on this site might be able to help you further.
Hope this helps a little
thanks for your time boh113. i can still sync through the USB port so i guess bluetooth will have to wait. i just use it for wireless internet around the house when i'm not at the pc anyway.
i might try the hard reset when i have more time to tinker with the magician. but in any case, i'd like to thank you for trying to help
just an update in case somebody can help
i managed to pair my device with the pc already. but i still can't connect via bluetooth in the magician's async.
ok i found something in my registry pertaining to my problem. although i'm not sure how to fix it.
in the magician's async, under tools -> options -> PC -> options, there's a drop-down list for PC synchronization options:
`115200 Default
`19200 Default
`38400 Default
`57600 Default
`USB
there was a `Bluetooth option included at the end of the list before i did the bigstorage ROM.
going back to the registry, i found the keys to this list (although i'm not entirely sure if these are correct, but these are the only ones on my list)
HKEY_CURRENT_USER\Comm\RasBook\`115200 Default
HKEY_CURRENT_USER\Comm\RasBook\`19200 Default
HKEY_CURRENT_USER\Comm\RasBook\`38400 Default
HKEY_CURRENT_USER\Comm\RasBook\`57600 Default
HKEY_CURRENT_USER\Comm\RasBook\`USB
and to what i can see, HKEY_CURRENT_USER\Comm\RasBook\`Bluetooth doesn't exist. there are a whole lot of hex values under these keys and i'm not sure what they are for.
although if somebody could post/upload the `Bluetooth key from their device, i'd be grateful.
i'm aware that the hex values are also based upon hardware but i'm willing to try it out.
Ok i can find what your talking about but i dont have the ability to copy and paste the registry entry anywhere?!
if you can tell me how to get hold of this for you i'd be happy to help anyway i can!
most registry editors have the capability for exporting specific keys up to whole trees. perhaps if you have resco explorer and the registry add-on. or some other software similar to it. tap-hold and export?
thanks
I have resco explorer and the registry add-on but i cant find anyway to export the registry file?!
There's an option for import but thats it, also there's an option to copy but all it allows you to do is copy and past within the registry itself!
unfortunately i dont have the technical experience to do much ore tha n this, a quick guide as to which program to use and how to do it and i would be more than happy to help!
oh ok. open up resco explorer or the registry add-on. then navigate your way to this folder:
HKEY_CURRENT_USER\Comm\RasBook
there should be a \`Bluetooth\ folder within \RasBook\ what you do is tap-and-hold on that (`Bluetooth) folder until you see the drop down text list. "Export..." should be one of the options then you can specify where to put it. by default resco places it in the main memory
will wait thanks boh113
No worries found it and exported for your satisfaction!
Had to zip it ;D
hope this can help you further!
Goodluck
Much appreciated!!
Will try it out in a bit. I'll post my results after
Thanks boh113!
well, i got back the `Bluetooth option in async. but still doesn't want to connect to the pc. the hex values probably don't match the hardware in my unit. oh well. i'll test it out a couple more hours. and if i still don't get it to work, a hard reset might be my only solution. or re-flash with my original rom and start all over again. hahahaha
thanks for your help and time boh113. forgive me for having taken too much of it
No worries, sorry i couldnt have been of more help!
Good luck with it all!
*bump*
I have been searching the web for years trying to find the solution to what I would consider is a very simple requirement:
From Outlook on the PC, right click on a contact and dial to a connected Pocket PC via Activesync.
Now, either I am alone in this world, or my search capabilities are flawed. This is a function/capability I used to have with my old Sony-Ericsson & I am missing it badly - yes, I know there is a Powertool that provides you with a "window" to your PPC, but I have found that this is somewhat flakey, doesnt like Landscape mode and frequenly freezes the PPC.
Further, I have enhanced my Access application to perform the dialup via the CPROG.exe, what I am after is the same or similar functionality direct from Outlook... please help!
Is there anyone out there that can help me?
looking for the same
it seems we both live in the same world
Come on guys, are you really telling me there isn't anything out there at all?
err so remind me why one would want to do this other than to write some annoying dialer program?
OK, rather simple, really:
Working from Desktop PC, with PPC connected via ActiveSync and sitting in a cradle - by definition, this makes it a pain to access the PPC.
Current Scenario:
1. PC has Outlook open, search for a contact that you wish to converse with
2. Open Contact
3. Look at number
4. Lean over desk, usually spilling coffee, or unintentionally moving to another website
5. Try to use Stylus to dial number (or use Intellidialer to access the same contact you have in Outlook)
6. Make call
7. Hope you have put in the right number
8. Call goes to voicemail, throw phone against wall
All in all, a rather cumbersome scenario.
Preferred Scenario:
1. PC has Outlook open, search for a contact that you wish to converse with
2. Open Contact, or right click on Contact
3. Select number to dial
4. "Magical programme" sends dial request to PPC
5. Make call
6. Call answered, sale made, kids go to expensive Private School and Wife loves you forever
Makes sense now?
yep so get one of those programs to control your phone from the desktop?
sure its not what you really want to do but it will do the job
st3v3 said:
yep so get one of those programs to control your phone from the desktop?
sure its not what you really want to do but it will do the job
Click to expand...
Click to collapse
Did you ever read his first post?
yeah for about 4 or 5 seconds, gave pity and responded for the simple fact no one else did and thought i would show some interest.
at least some of us make an attempt eh helterskelter
Thanks for your pity, but I would prefer to know what, if anything, is out there. Obviously, I was mistaken in believing this was the font of all wisdom and exciting development in the PPC world. I truly cant believe that nobody has thought to put this together. Funnily enough, there is one that does this via Bluetooth, but as the XDA Mini wont allow multiple Bluetooth connections, I have been "forced" to find out if there is anyone clever enough to make this happen :sigh:
Hi!
I miss this funtion in windows mobile. This is the only reason why I consider to go back to my old Ericsson.
A little bit strange that it works with other software but not with Microsofts own?
Using .net you might be able to write an app (server) that listens on an open port on the PPC for coms from the active sync pc. When a certial string is sent down this port DIAL(123456789) the app calls the dial command in .net framework.
Maby its time to bite the bullet and code it.
Im having to with another app
No need for a PPC app, as you can already do this from the desktop - using:
rapistart.exe "cprog.exe -n -url tel:numbertocall"
from within any ap. I have done this from my Access program, I was looking to see if anyone had done this for Outlook as a plugin for the Desktop, or indeed some form of TSR on the PC that will take a hotkey and use the above for a highlighted number (yes, I know that I am now officially in fairyland).
mlk said:
No need for a PPC app, as you can already do this from the desktop - using:
rapistart.exe "cprog.exe -n -url tel:numbertocall"
from within any ap. I have done this from my Access program, I was looking to see if anyone had done this for Outlook as a plugin for the Desktop, or indeed some form of TSR on the PC that will take a hotkey and use the above for a highlighted number (yes, I know that I am now officially in fairyland).
Click to expand...
Click to collapse
Nope this can then be done using windows scripting host cause its the outlook that you need to automate not he PPC.
See the 3rd item on this page.
http://www.cooperstown.net/tips/outlook-address.html
It should be able to help you out just make a custom toolbar button in outlook to call this piece of code and your away laughing.
EDIT:
Where did you fiind the info on cprog. Is there any way it could help with this
Unfortunately, I cant remember where I found the information on Cprog - only thing I have is the "How to call a number".. tried for some time to find various parameters to no avail... not too sure if this will help with your problem.
OK Guys, I finally bit the bullet - thanks Shaun for the "hint" - and coded a Macro to perform this.
It may be a bit clunky and as a "non-developer" I don't have the requisite nous nor software to distribute this as a plugin. For this reason, I have provided this as completely open (as far as I can tell), so if anyone wants to take this further, I hope I have started you on the track and that you wont forget the initial starter!
For those of you that wish to install - you will need to access your \Documents and Settings\<username>\Application Data\Microsoft\Outlook folder and extract the zipped file. My recommendation is that you save the existing one first, just in case you have written a bunch of Macros - wouldn't want to get any nasty surprises here - remember, Outlook only has one Macro bucket and this file is it!
Once you have installed and either provided your own Digital Certificate, or have an appropriate level Security within Outlook to allow this to run, simply add the Macro "Dial2PPC.Dialit" to a toolbar both in Outlook (that comes up in Contacts preferably) and in the Contact Form itself (use "Customise" as you would in any other Office application to facilitate this).
From here, it is as simple as selecting the Contact from your contact list and clicking on the Macro button you have setup - then follow the instructions, make sure your PPC is connected & Dial away!
Please note that you will need to have installed RapiStart from the Windows Mobile Power Toys and that I make no assertions that this is bug free, so use wisely - although, I am pretty sure I have most of the bugs out.
Again, this is provided open & free, so if you make an enhancement, please share it with the rest of us!
Hope this solves the "issue" for you guys as it has done for me!
DialViaActiveSync
mlk – thanks very much for your macro. I’ve taken the liberty of rewriting quite a bit of it (everything other than the part which communicates with the device, really), and have made it available under the GPL v2.0, in order to preserve its “Free” status.
In terms of changes, as I say, I’ve rewritten most of the back-end functionality. In particular:
1.) Adding items to the listbox – this now only shows fields which have a valid phone number, so there are no empty spaces
2.) Dynamic resizing of the form
3.) Form and “Dial” button captions show the name of the contact
4.) Where a contact has no valid phone number, a dialogue to this effect is shown
5.) You need to select number from the listbox before the “Dial” button is available
6.) You can double-click on a number in the listbox to dial it
7.) General tidy-up of some of the variable names, and removed a couple of unused variables
Installing my version:
I’ve exported the relevant files from the Project, so there is no need to overwrite the existing Project file – just open Visual Basic Editor (Tools / Macro in Outlook) and select “Import” and the browse to the relevant folder.
I'm a lurker rather than a poster on here, but, any questions, please do let me know.
Cheers,
Neil
Administrator
WindowsMobile247.com
[email protected]
Neil,
Champion stuff mate - I have always said it is best to wait for Version 2! Just one question: The ".frx" file, what is that for?
Mark.
It's the binary file for the VB .frm - it's not something you manually import, but it's necessary for the display of the form.
BTW- I've changed the contents of the .zip file for download- realised that I'd left in a line (an extra ResetState call) which stopped the whole thing from working - new version uploaded (same name) should be fine.
Cheers,
Neil
Administrator
WindowsMobile247.com
[email protected]
Thanks for this, maybe should change my mantra to: Wait for V2.1?
P.S. Thanks for coming out of the lurk!
Nah- v2 was fine... if I hadn't been meddling with it...
Managed to put the reset call before the RAPI argument, which, of course, wiped out the phone number it was trying to dial... Stupid, stupid, stupid -embarrassing, but at least easy to fix.
I guess that the next step is to try and implement SMS via ActiveSync - not sure if cprog.exe handles this, though, so it could be rather more complicated...
I’m using Diamond with original 1.93 version ROM. I got it to work perfectly with both Wi-Fi and 3G network for all applications without exceptions.
Lately, Internet Explorer started to behave strangely. When I start it, it immediately responds with “The address is not valid. Check the address and try again”. Same respond when I select Menu->Home. The address bar in both cases is left empty and doesn’t show "file://\windows\default_0409.htm" as before.
Favorites and manually entered URL addresses work flawlessly. This issue repeats itself when I modify the home page in the registry, with and without soft reset.
It seems Internet Explorer is disregarding the registry key.
I’ve searched the net and found similar issues in other Windows Mobile phones and also in previous versions, but couldn’t find a solution, besides hard-reset, which I’d like to avoid at the moment.
Any help to overcome this is appreciated.
Warning! More and more dumb questions are being asked.
1. Open IE
2. Type the address you want as your home in to the Address bar.
3. Click on Menu (Right softkey)
4. >Tools
5. >Options...
6. Use Current
Thanks for the fast reply, Usper.
you are right, it was dumb of me not to mention in the first place that I've tried that already. But I've repeated according to your steps, just to be sure.
Here's what happened next:
7. click OK
8. Select Menu->Home, got the same error
9. Click Menu->Tools->Options...
10. No home page is mentioned
Any more suggestions will be appreciated.
I have the same problem!
Anyone come up with a solution?
I have to say,that I have the same problem with IE. My first step was open google and in settings set it like the home tab...Didn't helped...Anybody with solution?
i have a Toshiba Satellite.. about 1 year long and i put a Kingston bluetooth USB on.. ive used it before with my Sony Ericsson and i had no problem but now that i try to connect with my HD it doesn't work.
my HD thinks it connected but my computer doesn't
i cant send files to the phone or anything at all.
its not even recognized
everything works fine if i use the USB cable the HD brought
do i need to update some kind of drive? or what?
anyone got any ideas?
Windows Bluetooth Protocols
Just an idea, but some phones use File Transfer Protocol on Bluetooth, however Windows Mobile devices use Object Push Protocol, adding this protocol onto your Laptops range of available Bluetooth settings, SHOULD allow you to transfer files between Laptop and Touch HD via Bluetooth. Had a similar problem with my laptop!
Hope this solves your problem!
"Once upon a time" in windows mobile 6 I was able to browse my phone through bluetooth connection.
Now with the Blackstone it appears to be impossible. There is no such option within the bluetooth settings.
i still cant get it to work.. what i did notice is that the Image File Transfer Protocal (for pictures and basic types of files) isn't available on the HD.. maybe thats why it doesn't work.
EDIT: has anyone gotten their phone to work with bluetooth? to send files? like a picture? or a new problem you just got? or a powerpoint? ..
im so lazy to hook up the cable every time.
tyronne1126 said:
i still cant get it to work.. what i did notice is that the Image File Transfer Protocal (for pictures and basic types of files) isn't available on the HD.. maybe thats why it doesn't work.
EDIT: has anyone gotten their phone to work with bluetooth? to send files? like a picture? or a new problem you just got? or a powerpoint? ..
im so lazy to hook up the cable every time.
Click to expand...
Click to collapse
i can send and receive files to my device and have them stored to my Bluetooth Share folder on my storage card. i exported the registry changes and dll from my Orbit2. you can get the dll file here and the registry changes here. it's probabaly best if you follow my instructions from here. once you've made the changes, soft reset and you should be able to send files to your folder of choice without prompts. there are probably other methods of accomplishing the same task, but this has worked for me since i've had my HD. oh yeah, the disclaimer: you assume all risk for anything that happens as a result fo the import and file copy to your device.
i rather not go through all that.. dont want to mess up anything. leaving it pretty much stock. best way to go. besides adding programs (real ones) haha.. only thing i have is HD Tweak from here.. i dont evne have gyrator.. not really needed. thanks anyway. ill just use the cable.
if you're not an experienced WM user, i can understand not wanting to follow the detailed instructions. they were created for the person who requested the info. really, your not installing software, your copying a (certified windows mobile dll) file to your device and importing a registry setting. it's basically the manual steps a cab file would execute. you copy the dll to your windows folder, use PHM or Resco Registry to import the registry settings, soft reset and then try to send a file to your laptop. that's it.
For me ActiveSync over Bluetooth between the Toshiba with Bluetooth dongle and the HD works out of the box, with standard Vista Bluetooth drivers (not the Toshiba ones). Key was to start the Sync from the HD (after pairing the two devices of course), it would never connect when trying to start the sync from the Desktop. To start Activesync, go to Settings tab in the TF3D UI, and use the first option "Sync Data" (Daten synchronsieren on my German ROM).
ill see what i can do later.. i got finals >< thanks guys
Lucas0511 said:
For me ActiveSync over Bluetooth between the Toshiba with Bluetooth dongle and the HD works out of the box, with standard Vista Bluetooth drivers (not the Toshiba ones). Key was to start the Sync from the HD (after pairing the two devices of course), it would never connect when trying to start the sync from the Desktop. To start Activesync, go to Settings tab in the TF3D UI, and use the first option "Sync Data" (Daten synchronsieren on my German ROM).
Click to expand...
Click to collapse
same here.... this method is to transfer files via Bluetooth/OBEX to a folder of your choice without prompts and without having to connect to WDMC or AS...
Hello,
Today I found my old broken (digitizer not working) touch HD sleeping in a dusty box... and I kind of felt sad for it.
All the hardware on the phone is working just fine except for the touch pannel
So I was thinking, is it possible to make some good use of it without investing any money for repair (it's just not worth it, as I have the brilliant HD2 since the day it got realeased)?
Having a non-working digitizer doesn't leave a lot of options but here is an idea:
Car tracking device? - have it installed in my car, constantly charging from the car battery, listening to GPS and sending coordinates over gsm data to my PC/server.
1. The blackstone have a GPS and you can install a simple data only SIM card from your provider, allowing your device to connect to a remote server over the internet and send important data - like gps coordinates.
2. It's still possible to install any custom rom you like.
3. There is a way to skip initial touch calibration screen: make an empty text file and rename it to "welcome.not" and place it in the root ot your sd card. (Thanks to Chef_Tony for pointing that out!)
4. There is a way to control the device via PC and a USB cable: after hard reset your device default usb connection mode will be ActiveSync. Then run the free MyMobiler application on the PC and it will automatically install on the usb connected device, allowing you to fully control it via your PC mouse and keyboard. (Thanks to Chef_Tony for pointing that out!)
I'm sure that I'm not the first nor the only one that came up with an idea like this, but I couldn't find any topic on it. I also know there are many brilliant developers in XDA that make loads of awesome apps for our HTC devices.
So, any ideas?
Shouts to:
Chef_Tony
Best wishes,
Xeno
new digitizer is about $8.. buy it, fix it at home and sell it for $100
yes, you can always replace the digitizer and have a fine phone.
but anyways, since your plan seems pretty interesting, here is some basic input to help you:
3. you can bypass the OOBE. all you need to do is, create an empty txt file on your pc, "untitled.txt" and rename it to "Welcome.not", (yes, change the extension to "not") and put it in the root of the sd card, then the welcome wizard should be skipped after a hard reset, and so you don't need to align the screen.
4. after a hard reset, the default option for a usb connection is activesync. then you can run MyMobiler on your pc, it will install on the device automatically and you can control the device on your pc's screen with keyboard and mouse.
so you can still use it for anything you like, if you control it over the pc and preconfigure it to meet your needs.
sleby said:
new digitizer is about $8.. buy it, fix it at home and sell it for $100
Click to expand...
Click to collapse
I gave it a shot few months ago and I failed The problem was that the digitizer is literally glued to the lcd panel, and detaching it is a REAL pain the butt (I almost broke it). Anyway, after reassembly the new touch screen didn't work and I gave up. I cursed myself later on when I found the topic here in XDA forums that the best way is to buy a digitizer+lcd combo...
Chef_Tony said:
yes, you can always replace the digitizer and have a fine phone.
but anyways, since your plan seems pretty interesting, here is some basic input to help you:
3. you can bypass the OOBE. all you need to do is, create an empty txt file on your pc, "untitled.txt" and rename it to "Welcome.not", (yes, change the extension to "not") and put it in the root of the sd card, then the welcome wizard should be skipped after a hard reset, and so you don't need to align the screen.
4. after a hard reset, the default option for a usb connection is activesync. then you can run MyMobiler on your pc, it will install on the device automatically and you can control the device on your pc's screen with keyboard and mouse.
so you can still use it for anything you like, if you control it over the pc and preconfigure it to meet your needs.
Click to expand...
Click to collapse
Thank you fine sir for the light on the topic. I'll make sure to add this in the first post
Every new idea/info will be of great value reaching the goals of this thread
Ok, putting a welcome.not file on the root of the sd card did the trick as promised. I conneced the device to my PC via usb and as expected it connected via ActiveSync by default.
Unfortunatelly MyMobiler was unable to install the mobile part of the app automatically - it poped a message on the phone "This program is from an unknown publisher..." and it's now waiting for confirmation to continue the execution of the app... and it's pretty impossible to confirm this with a broken touch pannel
I believe there is a registry workaround for this, but it should be set by default in a cooked rom? I'm using the latest WWE rom from HTC.com.
It will be great if some good chef could mod this rom and make this annoying message go away
1. i just had an idea on how to get mymobiler running. i cannot promise, that it'll work, but it certainly doesn't hurt.
having the latest mymobiler on your pc, you see different files there, some of which are named:
remote.exe
remote.exe.40
remote.exe.50
when you connect the device in activesync mode, and set it up for syncing (at least notes or browser favorites, something that does not actually mess with your pim data), you will see the blackstone in "My Computer". entering it, you have the storage home drive and the storage card. by enabling "Show hidden files" and disabling "Hide system files" in your windows explorer, you should be able to access the windows folder of the device. then you can copy the file remote.exe.50 there, rename it to remote.exe (the .40 file is for wm2003, the .50 file for wm5 or greater, but you need to remove the extension to make it executable).
and then, since you cannot make shortcuts yet, copy the file again to \Windows\StartUp\
thereby making it run automaticly, when the device boots. then soft reset, and i am fairly certain, you should be able to run mymobiler.
from there on, you could disable the signature warning for future programs.
EDIT: apparently, the startup folder is victim to the certification warning as well. still i leave this paragraph, as i find it interesting as to how mymobiler works.
2. another idea would be to just flash any cooked rom found here on the forum. all of them have this stupid signature warning disabled and are ready to run mymobiler out of the box.
3. my third idea to get it running is trying to modify the responsible reg key:
\HKEY_LOCAL_MACHINE\\Security\Policies\Policies\0000101a
it is a dword key, where the value '0' is activated warning, and '1' means, the warning is disabled.
in the 2577.zip in the attachment, you will find a reg key, that changes this value and also a cab file to do the same thing.
on a device with an ARM cpu, the folder 2577\ on the storage card will be monitored for autorun.exe and execute it, when the card is inserted. i also packed 3 different autorun.exe files in there, one by me, one by navigon, and one by igo, hoping at least one of them would work with a proper certificate. what you'd need to do, is extract it, and copy it to the storage card, so the path is \Storage Card\2577\Autorun.exe
autorun classic works with the CFG.txt, which is also included and changed to work, as long as your rom is WWE and the storage card is actually named \Storage Card\, if not, edit the path.
until now, i was unable to run it, because the autorun.exe files aren't signed with a trusted certificate either, but i'll give other people time to post ideas, and rethink the thing, maybe i can make it work for you.
still i think, if you are gonna use the device for a few little features, you are not required to use the stock rom, so flashing another rom, which then does not have the certification warning would be the easiest way to go for everyone involved.
Connect it to your PC and use it as a monitoring tool!
Can come handy when benchmarking.
http://forum.xda-developers.com/showthread.php?t=695298