Database Users

Touch Screen

Hi, I have a problem with my Cingular 8125. See my touch sreen is not working and I just flashed my phone. Now I am at the part where it tells me to "Tap the screen to set your Windows Mobile based device." Since my touch sreen is not working, I can not touch it, well I did but it does not work. Is there any other way I can by pass this? Any help is really apprecited, thanks in advance.

why not install wm6 standard rom without (touch screen)

If can provide the link, I would really apprecite it and also I tried flashing the ROM with WM6 but I have Vista. I followed all the steps in how to update ROM with Vista but it doesn't work. Everytime I try to flash the phone, it says "ROMUpdateUtility MFC Application has stopped working" and I can not seem to find any solutions .

PLEASE NOTE!!! SMARTPHONE(Non touchscreen) AND POCKET PC ROMS ARE TWO DIFFERENT THINGS! YOU CANNOT FLASH A SMARTPHONE ROM TO A POCKET PC!

I tried flashing the Cingular 8125 with a WM6 ROM, and that doesn't work. I couldn't find any ROM that has the touch sreen disabled . Is there a WM6 for Cingular 8125 that has the touch sreen disabled? If anyone could help me, I would really apprecite it.
- Thank You...

aiq said:
Hi, I have a problem with my Cingular 8125. See my touch sreen is not working and I just flashed my phone. Now I am at the part where it tells me to "Tap the screen to set your Windows Mobile based device." Since my touch sreen is not working, I can not touch it, well I did but it does not work. Is there any other way I can by pass this? Any help is really apprecited, thanks in advance.
Click to expand...
Click to collapse
If your touch screen doesn't work I don't know how much use the phone will be for you but to get past the spot your in at this stage of your install you can always use a freeware called my mobiler at mymobiler dot com or pocket controller pro from any of the usual places.

Than you for the software information, it really helped but I'm still stuck, I am at the "align screen" part, I keep tapping the target but never works.. .

I just posted this on another forum and then I read this posting. Based on what I read here, the MDA is totally hosed if you cannot use the touch screen?
Well my MDA Touch Screen has finally quit working. My MDA is almost 2 years old. Now I have a problem using the MDA since I am so use to using the Touch Screen. Has anyone tried to use the MDA without the touch screen?
If so, how did you setup your MDA? I cannot even get to the various button menu to reset all my buttons. I have been using SPB PocketPlus, SPB Diary, etc., and now I am at a loss to even get to the Menu Screen. Any suggestions will be appreciated. Thank you in advance.

All I can say is that you can try to change the touch screen or call T-Mobile or HTC to see if they will replace it for you. I just ordered a new touch screen I found on eBay and am waiting until it comes so I can replace it and see what happens. If you are having software problems, I am not sure what problems you are having, you can try to re-flash the MDA with the newest MDA ROM or a ROM on this site...
Hope it helps

I had the exact same problem you had, and I finally came across a solution on a different site.
All you need to do to bypass this is connect your phone to your pc (usb activesync) and browse the contents on your wizard and delete \\\Windows\StartUp\Welcome.ink . Then soft reset your phone and you are past the screen calibration part and continuing the installation

A Little Late
I had the exact same problem you had, and I finally came across a solution on a different site.
All you need to do to bypass this is connect your phone to your pc (usb activesync) and browse the contents on your wizard and delete \\\Windows\StartUp\Welcome.ink . Then soft reset your phone and you are past the screen calibration part and continuing the installation
Can you tell me how to find this file? I've connected my 8125 to my PC, but did a search for the file and it's not found. If I can bypass the screen it would at least be able to be used. I appreciate your help. Also, using My Mobilier doesn't work if you can't tap the screen as I tried it.

Stuck at align screen

Hello
i've got en elf but it is stuck at the align screen.
i searched the forum for many day's and i found out that the digitizer probably is broken.
So i bought an new one an installed it with this manual
http://forum.xda-developers.com/showthread.php?t=407323
great manual by the way
I also installed a new housing
I installed one of the new roms
But it is still stuck on the align screen$
I have a constant loop
first middle cross, then the 4 corners and then back to the middle
i installed a program to override the align screen and then the i can use the phone but when i tap the touch screen it is not the place i tapped that opens because it is not aligned
What can i do because i am all out of answers
ps there is no warrenty anymore
Greetz Hatchy

it could be the touchscreen
LCD and touchscreen are not the same
some models heve them separated,some not
as i could see elf has
touchscreen pic1
LCD pic2
so try replacing the touchscreen they are few dollars on ebay

Or if you want, you can have somebody cook a ROM for you that bypasses the screen alignment part.

kareem9nba said:
Or if you want, you can have somebody cook a ROM for you that bypasses the screen alignment part.
Click to expand...
Click to collapse
i doubt it's the software,because he said he tried some roms
and bypassing screen align can make phone unuseable,so....

farukb said:
i doubt it's the software,because he said he tried some roms
and bypassing screen align can make phone unuseable,so....
Click to expand...
Click to collapse
Yea, but even though, he can still use the phone without the touch screen before he gets it replaced.

kareem9nba said:
Yea, but even though, he can still use the phone without the touch screen before he gets it replaced.
Click to expand...
Click to collapse
well if it was artemis...he could (arte has a mouse pointer)
but elf lacks the buttons,so using it without touch will be tricky

Hello
i replaced the touch screen because the old one had the same problems
but the new has the same problem

hatchy said:
Hello
i've got en elf but it is stuck at the align screen.
i searched the forum for many day's and i found out that the digitizer probably is broken.
So i bought an new one an installed it with this manual
http://forum.xda-developers.com/showthread.php?t=407323
great manual by the way
I also installed a new housing
I installed one of the new roms
But it is still stuck on the align screen$
I have a constant loop
first middle cross, then the 4 corners and then back to the middle
i installed a program to override the align screen and then the i can use the phone but when i tap the touch screen it is not the place i tapped that opens because it is not aligned
What can i do because i am all out of answers
ps there is no warrenty anymore
Greetz Hatchy
Click to expand...
Click to collapse
When your PPC is at the alignment part of the start up process simply plug it into your computer and let activesync run. You do not need to set up a partnership at this time to do this.
Explore your PPC and go to the windows folder and then to the startup folder and delete the welcome file in there.
Soft reset your PPC and you are good to go!
I had an IPAQ for years that had a bad spot in the middle of the screen and this is the only way I have found to bypass the alignment.

I am stuck on the align screen in a loop as well. What program did you write to skip the screen. I am not able to use the phone because of that. I am really terribly stuck. Please help. Thanks.

I hear placing a blank text file named "welcome" with the extension ".not" on the root of your SD card after hard resetting will bypass the Windows Mobile setup. And until you get your screen repaired (if ever) and if you have a working DPAD, then you can download a free, configurable mouse cursor here. Just go the the third post and click on the attachment I posted.
Dave

Well,
For what it's worth,
I found out on my brother's Qtek S200 that was also in a loop, that it automatically passed the align screen after some 15 times.
Later I found this in the registry:
HKLM\Hardware\Devicemap\Touch\MaxCallError(=16)
So I assume you can tick the align screen 16 times before it continues?

it works!!

Another touch screen issue after ROM change

Hey guys have used search high and low, and cant seem to find the answer to my current problem, i just recently bought a jasjam, and i love pretty much everything about it, but when the ROM was changed the owner said that the touch screen stopped working. Apparently it was fine before the change, but that it didnt work after. So i figured that it was a software issue, loaded the latest SPL, and relaoded another ROM on the pda. Now the toush screen still doesnt work, but i have noticed that you can tap the screen when asked to get to calibration screen, and tapping the screen will also turn the back light on, but i am unable to calibrate the phone touch screen after the initial tap.
i have since loaded remote screen calibrator, and skip calibrate, and the phone seen to run well, except for the touch screen, on that note i have noticed also that the touch screen will accept one tap when loaded to the today screen, then stop working, i have hard reset, soft rest, changed to latest SPL, and the latest ROM from the forum.
Could it still just be a dodgy touch screen, or does it sound like a software prob to you guys, thanx heaps for the time
Trix

Hey guys have had a look round the web, and i get the feeling that perhaps the touch screen driver is screwed and was wondering if there is a way of checking, by replacing just the touch screen driver? i have placed a number of different ROMs on the phone and none of them make any difference to the non working of the touch part.
if someone could let me know if i am wrong in my thinking please let me know
thanx heaps
peace Trix

Anyone?
thanx in advance
Trix

[Q] my touch screen not acting properly

please can anybody tel me what could be the reason tha my touch screen is not working.. i hav htc touch hd.
it sometimes works and some times doesnt.
thnx

Touch hd screen not responding to touch or stylus
Touch hd screen not responding to touch or stylus
--------------------------------------------------------------------------------
In early February I upgraded my Touch HD to 6.5 from 6.1 and if am right it was energy.blackstone.21891.leo_Max. It worked for about two week and and then one day I struggled to get a gps fix on my tomtom. The next day the screen just froze with no response of any touching or stylus.
Managed to put the original orange rom back on it but could not cariberate the screen due to its not responding. I sent the phone to HTC UK for repairs but they said due to my having used unauthorised software the motherboard needs to be replaced and they were asking me to pay 168 pounds so they could go ahead with the repairs. I got the HD2 on a new contract.
Still love the TOUCH HD and was wondering is there another way of breathing life into this thing. Responds well to install new roms but the screen continues to remain frozen

Hello.
I have same kind of Problem.
My HTC had broken Screen, I had it repaired.
After it came back the touchscreen worked OK. Than I flashed it with the ENERGY Blackstone ROM.
Flashing etc was OK. Device started again and came to the Point where you have to tip on the screen to do the SETUP. But that did not work. I tried Softreset. Hardreset but No change of Problem.
Send it back to the repairshop and after I recevied it again the Energy was still on it and working.
Since a new ENERGY rom was out, I flashed it again . Result, Same Error, NOT working. To make sure that the ENERGY-ROM wasn't the error, I reflashed it with the Original HTC ROM.
Also this one does not work. It also comes to the point where I need to tap to do the Setup. Nothing happes.
When I attach the Phone to PC with ACTIVESYNCH, the Synchronisation works OK.
Any Help Any Idea ??

Probably you need to replace digitizer(touch screen layer, not LCD) Look on ebay for a new one.

Rigdzondorje said:
Hello.
I have same kind of Problem.
My HTC had broken Screen, I had it repaired.
After it came back the touchscreen worked OK. Than I flashed it with the ENERGY Blackstone ROM.
Flashing etc was OK. Device started again and came to the Point where you have to tip on the screen to do the SETUP. But that did not work. I tried Softreset. Hardreset but No change of Problem.
Send it back to the repairshop and after I recevied it again the Energy was still on it and working.
Since a new ENERGY rom was out, I flashed it again . Result, Same Error, NOT working. To make sure that the ENERGY-ROM wasn't the error, I reflashed it with the Original HTC ROM.
Also this one does not work. It also comes to the point where I need to tap to do the Setup. Nothing happes.
When I attach the Phone to PC with ACTIVESYNCH, the Synchronisation works OK.
Any Help Any Idea ??
Click to expand...
Click to collapse
Damn, I have almost the same problem!
I have used Energy roms for a year, without any major problem. I have installed dec. 20. NRG rom, and today it is completely messed up my HD. No response on touching the screen or pressing any button. After a hard reset the touchscreen alignment was came up, and the touchscreen is working, but I can't align the screen, it starts over and over again... and thats all. I cant do anything else with it. I have reflashed stock rom and spl, still the same.

mchaals said:
Damn, I have almost the same problem!
I have used Energy roms for a year, without any major problem. I have installed dec. 20. NRG rom, and today it is completely messed up my HD. No response on touching the screen or pressing any button. After a hard reset the touchscreen alignment was came up, and the touchscreen is working, but I can't align the screen, it starts over and over again... and thats all. I cant do anything else with it. I have reflashed stock rom and spl, still the same.
Click to expand...
Click to collapse
same with me here... I also have got an EnergyRom installed. For more then one day now I get no response from the touchscreen. Everything else seems to work properly, e.g. the popups which remind me appointments are there.

Exactly the same here!
I installed energy sense last week, phone worked fine for 4 days then i came to use it and it didnt respond to the touch screen, however tapping the screen would bring back on the backlight?
I hard resetted it and also flashed a new ROM on, still the same, I found that it was responding but taking up to 5 mins to respond, i.e if you tap the first calibration point, after about 3 minutes the point moves, however calibration never completes.
I think the phone is scrap.

retsam88 said:
Probably you need to replace digitizer(touch screen layer, not LCD) Look on ebay for a new one.
Click to expand...
Click to collapse
Yeah, this is digitizer problem.
Check my post

[Q] HTC Touch P3452: Touch Screen problem

Hey there. I have an ancient HTC Touch P3452, running Windows Phone 6.1. When I remembered about it, I tried to start it up, hoping to flash Android onto it. But for some reason, the touch screen doesn't work. It used to work like anything back in '11, and it can't be broken when kept in a drawer. The screen's got kind of dark patches on it. Is it repairable?
PS: I haven't tried resetting it, 'cause I don't know how, and Google won't help.