I've got a XV6800 and today I downgraded to VZW 6.0 rom and then back up to the stock MR1 rom. Followed instructions to the T and now I have no data connection. I've let customizations run and still nothing. And it won't save my username and password in the connection settings. Please help this is like my 6th one of these. I'm tired of not a having a working phone.
Related
So, I got this 6800 from a friend of mine along with a 6700 ( with a very bad battery ), figuring that I am going to develop software for 6.0 I went with the 6800 for the Rom Upgrade. I had the original Qwest Rom on here
Software Version 2.13.656.2
Firmware Version 1.39.00
I went ahead and followed the Ryan Mogul Cricket flash info ( yes i plan to flash this to cricket also ) however sadly before I installed his cricket ROM, i went ahead and followed the instructions for the NUERom2_5049 and after the flash ( done via laptop/activesync connection ), the phone seemed to be bricked. I tried every trick in the book from using the 1G MicroSD card that I have with the ROm on it ( considering the 4G wouldnt work at all ), and couldnt get anywhere.
I also tried flashing Sprint/Alltel/VZW Roms without success, I finally came across the Stock Rom ( Upgrade ) frm Qwest, ran it from Laptop, worked like a charm.
OK now for the questions... Here is some quick info about the new rom. It is Software Version 3.35.656.2, and the Firmware Version is 3.37.20 . At this point I am considering a couple of options.
1. leave the working rom on here and just play with the registry, settings, software, etc.. to get my goal accomplished.
2. Flash this thing over to Ryans Cricket Rom for Mogul ( Hey Ryan if you read this... Is that compatible with the Qwest Mogul?) and go ahead and start the service.
3. Custom Rom, and find a way to get the Cricket info in there.
Also I am using PRL1039 from CK right now, working like a charm so far, I am also wondering if this unit will work on cricket as is if I change some settings.
Just a few things im trying to figure out right now. Along with the ability to get the device to become a Portable Hotspot/ Wireless Adapter ( I now finally have this working as an internet connection....Laptop to PPC via USB Cable, PPC to Netgear Router via WiFi, and im online! Thanks a bunch for anyone with any suggestions, I look forward to seeing what I can do with this device. Also I have the SPL 1040, should I chance it for Cricket?
Thanks in advance!
First thing you want to do is re-do your PST settings to Cricket as the stock ROM changed all of that. Including unlocking your MSL/SPC code to all zeroes and loading a Cricket PRL on there. Follow my Cricket PST settings thread for that. Then you want to remove your memory card and boot up your current ROM into windows mobile and connect to active sync. Make sure its connected you should be able to access the files on the device through your computer and sync icon in taskbar will be green.
Now flash the unlocked bootloader Olipro2.40 exe. You can find that in my htc unlock tools directory on my share site, link provided in my PST settings thread.
After that is all said and done you can flash any Custom ROM including mine. If you use my Cricket ROMs all you have to do is activate the data connection and enter your [email protected], password cricket, blank domain, check save password. Done.
If you use someone elses NON cricket ROM you can always use my Cricket WAP or WAP and Arcsoft CABs to set up the Cricket information for you. Hope this helps.
already redid the spl stuff, still cant seem to get the msl back to 000000 but i do have the correct one. Just got the unit working as a wireless adapter so thats a plus, i need to get this thing over to cricket next, so I can get my account set back up. right now using Skype for phone service sicne I have WiFi. I will try your rom again, Ryan , as soon as I get things going with this again. Thanks for the tips, they seem to be coming in very handy ( been googling your posts for help with this device ) I know the 6700 inside and out but the 6800 seems to be a new dog right now, been playign with it for a while, got alot figured out, but still more to learn. Thanks again
ok just to update a bit, ive made a few slight changes, got a few new accessories, and tweaked out a few settings, however, all this and i still havent gotten the MSL back to 000000. Any ideas at all, tutorials, walkthroughs, hits, tips, tricks, or otherwise step-by-step directions so i can get that back to 000000 insead of the 6 digit code it is now, then maybe *2/228 will work and i can actually use the data features. Thanks in advance.
Ok,
Here is the rundown...
I've got a Cellcom Mogul running on Sprint, don't ask, its working as far as voice.
I'm trying to get the data connection working although I've been pretty unsuccessful.
I'm running a wm6.5 rom, although I was running a 6.1 rom too and couldn't get it.
I'm rusty with WM since going over to Android and could use some help..
I've installed the update profile/prl cab, neither work. It seems to hang on "The network is updating your PRL" same with the Profile.
I'm assuming I need to update my profile, not sure how to go about it since the Sprint tool doesn't work.
I've changed the user name to [email protected], I'm not sure what to put as a password, I've got it blank now.
In the data settings I have the #777 with no username/password.
If someone could get me all the m ip settings that would be great.
Anyone?
Anyone have any idea how I can get the data to work. It is registered on my account nothing illegal by buddy at sprint got the ESN added for me so I went back to the original and just need help with the data connection.
IOTA fails everytime.... #777 won't connect.... what can I do?
Update profile fails also.
you might try the "restore" for the data connection, then an iota update.
Did you flash a stock sprint rom?
im currently running trigger 3.2 with nothing else (no special kernels or themes or anything) and recently I have not been able to establish an internet connection over 3G. I have only been able to do it over wifi. I went to the tmobile store and the guy told me that since it was rooted he couldnt help me but to ask you guys instead. so heres my question:
is this problem because of my phone or because of my rom? im hoping its just the rom so i can flash a diff one but im wondering if anyone has a solution to it or anything like that.
Wireless&network> Mobile network> APN. Make sure T-Mobile's detailed are checked, as in there's a green dot next to the APN. Reboot afterwards.
Try reflashing just the modem first before you resort to a whole ROM flash. KB5 is really picky with sending/recieving data on my Vibrant, and I had to flash the KA6 modem to get it to work well.
Hoping for some knowledgeable assistance here because FreedomPop has been no help. Two issues, probably related:
I have the SPH-720T 0A3 activated with FreedomPop but it only works over WiFi. I can't connect over 3G/LTE.
I get the Sprint Hands Free Activation on bootup and whenever I try to update Profile and PRL.
I'm rooted and have TWRP. I've tried a couple of ROMs, but they had the same behavior, so I reverted back to stock. I tried changing to CDMA mode and that brings up the 3G icon, but still no data access. It boots up with no APN checked and without the FreedomPop APN; I added the FP APN, but it doesn't help and disappears on reboot. I tried changing MDN and MSID to my FP phone number, but that also hasn't helped and they revert back on reboot. Mobile data is on.
I would appreciate any help on figuring out what exactly the problem is and whether I can fix it or if there is something I can go to FreedomPop or Sprint with and tell them what needs to be done. I'm new to all this but don't mind learning or following directions.
Many thanks.
Hello folks,
Galaxy S4, Play Edition, currently rooted and AOSP 7.1.2 installed.
I rarely used data on this phone and never since I installed the ROM. Lately, I needed the data often and I noticed that I do not get the data on this ROM. I confirmed with the carrier about the APN settings (Airvoice Wireless, att MVNO). The carrier reset data from their end. I tried manual APN entry but none worked.
Searching on the web led to various ideas, like reset network settings, airplane mode on/off etc etc. Tried everything, no change in the status quo. I am at loss on what is the problem. I tried the SIM in my wife's phone (HTC One X, Kitkat) and it worked without any issue.
I could not figure out PDA, CSS but the baseband version is I9505GUEUDNL3, in case if it needs an update.
I checked the thread (https://forum.xda-developers.com/galaxy-s4/general/ref-galaxy-s4-i9505-modems-bootloaders-t3315987) over and over but didn't understand what/how this stuff is worked out.
I am really going nuts and I do not want to pony up for a new phone at this moment.
Any help is appreciated.
Flash back to a stock ROM and check for data connectivity. If everything works, it's a ROM issue rather than being a hardware issue.
The issue seems to be related to the ROM.
I restored to 5.0 (LRX21P.S012.141205) and the data works flawlessly.