Ok.. touchscreen tweak v3.3 test version. Backspace fix test - HD2 General

Please, if you don't have touchscreen problems don't try to fix what's working well.
1 - straight lines fix with stock sensitivity install the normal one
2 - Straight lines fix + ghost press fix (for who has them, it's a little bit different than bsbtweaks) install "with_reduced_sentitivity.cab"
Feedback is welcome.
SOFT-RESET AFTER INSTALL.
To new users. This try to fix this problem.
http://forum.xda-developers.com/showthread.php?t=595655
and old thread here.
http://forum.xda-developers.com/showthread.php?t=585511

What is this cab changing?

if u open cab on pc, you can view the 'setup' file that has all the reg changes.

i'll give it a try - let you knw

Bib_x said:
What is this cab changing?
Click to expand...
Click to collapse
Under the following key
HKLM\HARDWARE\Setting\TouchPanel
parm name="HWMode" value="341" datatype="integer" />
<parm name="XBorderFilter" value="3" datatype="integer" />
<parm name="YBorderFilter" value="2" datatype="integer" />
<parm name="FingerupThreshold" value="0" datatype="integer" />
<parm name="NoiseThreshold" value="0" datatype="integer" />
<parm name="FingerThreshold" value="0" datatype="integer" />
<parm name="YNegative" value="0" datatype="integer" />
<parm name="YPositive" value="0" datatype="integer" />
<parm name="XNegative" value="0" datatype="integer" />
<parm name="XPositive" value="0" datatype="integer" />
<parm name="YAvgDis" value="48" datatype="integer" />
<parm name="XAvgDis" value="48" datatype="integer" />
<parm name="MultiDebounce" value="30" datatype="integer" />
<parm name="SipExpand" value="10" datatype="integer" />
<parm name="Sipmenuwidth" value="40" datatype="integer" />
<parm name="SleepTime" value="0" datatype="integer" />
<parm name="HWSleep" value="0" datatype="integer" />
<parm name="driverMode" value="65535" datatype="integer" />
<parm name="timeClick" value="900" datatype="integer" />
<parm name="maxAvgsize" value="1" datatype="integer" />

I feel like this increased ghost presses in my keyboard. Reverted to v2!

The sensitivity is hd2 stock so that is possible. has ppl said they didn'tlike the reduced sensitivity i did not mess with it.
i can create a cab with v2 and v3 togheter for who needs both tweaks or use bsbtweaks to reduce sensitivity and this to correct the incorrect lines.

so far seems okay - i didnt go for the reduce sense as i have a mirror protector that helped but will give you my final verdict at the end of the day - its better to give it realistic testing then to blitz a few message out

unque1 said:
so far seems okay - i didnt go for the reduce sense as i have a mirror protector that helped but will give you my final verdict at the end of the day - its better to give it realistic testing then to blitz a few message out
Click to expand...
Click to collapse
thank you, that's what i need!

I installed this onto 1.61 with decerased sensitivity by BsB Tweaks. This makes me type faster and with more ease on the default manialla keyboard. I tested it in Notes as well, and I can draw straight lines. Straight as an arrow. Or almost.
Thank you for your work!
Regards
Lukas

could you attatch this file to your post? Rapidshare won't let me download without a premium account...

ThoroSOE said:
could you attatch this file to your post? Rapidshare won't let me download without a premium account...
Click to expand...
Click to collapse
cab on first post

Thanks for the quick reply. But sadly it had no effect on the shaking screen issue or the strange drawing of straight lines in notes (still like a heart monitor lineprint...). But typing seems to be a little better. Could you attach the original .cab as well (just in case)?

did you soft reset ??

Sure I did. And after the reboot the very first thng I did was trying to draw straight lines in notes... With the mentioned success :-(

ThoroSOE said:
Sure I did. And after the reboot the very first thng I did was trying to draw straight lines in notes... With the mentioned success :-(
Click to expand...
Click to collapse
try the new cab. you also seam to have the ghost presses

No difference with the new cab (uninstalled the former one and did a softreset before installing). And yes I ocassionally do have the ghostpress issue but very rarely. But your .cab definitely improved typing accuracy. Screen feels more responsive and precise while typing.

ThoroSOE said:
No difference with the new cab (uninstalled the former one and did a softreset before installing). And yes I ocassionally do have the ghostpress issue but very rarely. But your .cab definitely improved typing accuracy. Screen feels more responsive and precise while typing.
Click to expand...
Click to collapse
so use the new one that also fixes the ghost presses give your feedback then

Looking forward to try this .cab. Hope that helps! back in a few minutes of testing

Well, this cab helped a lot, especially in the Sense Home tab (where i had the most discouraging issues)... even if there's little jittering here and there, this cab made the difference! i think you're in the right direction, good job
(all this stuff really pisses me a lot... 600 euros for this device and having THESE issues... is absolutely a rape! )

Related

how to manage different network profiles?

Hello all...
I'm searching since a few hours for a solution but there seems to be none...
I've to switch between at least three different WLAN networks every day. Most of them are providing dynamically IPs over a dhcp server but one important network needs a static IP configured on my network card. So I have to re-configure my "SDIO WLAN Wireless Adapter" every time when changing from one network into another...
That's really very annoying...
Now I'm thinking about to have something like network profiles which can be easily switched from the today screen...
Is there something out there which provides something like that?
Or is it possible to create something like a today plugin or similar which provides such network profiles?
Maybe this could be a good idea for a today plugin writer...
Please help.
German speaking
http://www.ppc-welt.info/community/showthread.php?p=743295
English speaking
http://www.pocketmax.net/smf/index.php?topic=2650.0
Project home page
http://www.iaccarino.de/silvio/NetManager.htm
More about this project
http://www.iaccarino.de/silvio/stuff/MobileProfilerReadme.htm
Hi siaccarino...
this looks very good, thanks!
I've downloaded and installed phonealarm and I've also already configured some phonealarm profiles.
Then I've downloaded and unpacked your MobileProfiler to a path without spaces in the Programs folder on the device (not on the storage card).
After that I've configured my device with a static IP and all other thing I want to use for the "work" profile. Then I've started MobileProfiler.exe through my filemanager and selected "<new>" for the profile "work". It asked me for a name for the new snapshot, all went okay and like explained in all readmes and documentations.
I've done the same for the "home" profile, now with dynamic IP setting in the network card preferences.
After storing and soft resetting I've tried to switch the profiles and all was fine except the IP settings of my network card.
let's assume I've configured my device to use dynamic IP. When switching the profile from "home" to "work" there appears a message box which says that MobileProfiler will now change the network settings... but the IP setting of my network card is still dynamic but it should be static (192.168.100.100) as configured and saved when taking the snapshot in MobileProfiler.
Maybe you have an idea what's going wrong here? I've all done like it was explained everywhere...
(Sorry for my bad english, I'm not a native speaker)
try to enhance the CreateSnapshot.xml :
<characteristic-query type="CM_NetEntries" />
or
<characteristic-query type="CM_Networks" />
Prior this you may do some tests with a query.xml document and check the result.xml for the ip number...
I´ve finished some experiments:
create a query.xml:
Code:
<?xml version="1.0" encoding="utf-16"?>
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic-query type="HKLM\Comm\TNETWLN1\Parms\Tcpip" />
   </characteristic>
</wap-provisioningdoc>
Execute the query and pick up the parameters you need and add a parm-query for each in CreateSnapshot.xml. Eg. add this for the IP Address, the subnet and the dhcp client:
Code:
<characteristic type="Registry">
<characteristic type="HKLM\Comm\TNETWLN1\Parms\Tcpip">
<parm-query name="IpAddress" />
<parm-query name="Subnetmask" />
<parm-query name="EnableDHCP" />
</characteristic>
</characteristic>
I have updated the manual with a much more detailed part, how to change the IP settings via Mobile Profile snapshots:
http://www.iaccarino.de/silvio/stuff/MobileProfilerReadme.htm
siaccarino said:
I´ve finished some experiments:
create a query.xml:
Code:
<?xml version="1.0" encoding="utf-16"?>
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic-query type="HKLM\Comm\TNETWLN1\Parms\Tcpip" />
</characteristic>
</wap-provisioningdoc>
Execute the query....
Click to expand...
Click to collapse
I've simply copy&paste'ed the above code into a query.xml then I've created a shortcut to "\Programme\MobileProfiler\MobileProfiler \Programme\MobileProfiler\query.xml" and run it.
There appear two msg boxes then. One at the bottom which tells me, that the results will be saved in \Programme\MobileProfiler\results.xml, and one in the middle of the screen which tells me: "Errorcode = CONFIG_E_BAD_XML"
The results.xml was not created.
But the file and its contents are looking okay for me?
and pick up the parameters you need and add a parm-query for each in CreateSnapshot.xml. Eg. add this for the IP Address, the subnet and the dhcp client:
Code:
<characteristic type="Registry">
<characteristic type="HKLM\Comm\TNETWLN1\Parms\Tcpip">
<parm-query name="IpAddress" />
<parm-query name="Subnetmask" />
<parm-query name="EnableDHCP" />
</characteristic>
</characteristic>
Click to expand...
Click to collapse
ahh, okay... I think "kate", the text-editor of KDE (Linux) is not Unicode'ed...
this can be the problem...
[edit]
but it can handle Unicode utf-16... so I've configured it and now I'm at modifying the files.... I'll report the success. Thanks
[/edit]
you may use PHM Notepad on the Pocket PC - it is Unicode aware.
Cool... all works like a charm now!
Many thanks!
It switches between static and dynamic IP... very cool...
So... if I understand this tool correctly, you can teach MobileProfiler to store every single registry value into such a snapshot and then to restore the stored registry values when switching between the profiles.
For this to work you have to create a query.xml as described above which queries the registry for params and values in a complete subtree.
Then you have to run MobileProfiler with this query.xml as a paramenter which then generates the result.xml which contains the parameters and values of the queried subtree.
Now you can use the parameter names to add them to the CreateSnapshot.xml which then is teached to store the value(s) of this parameter in a snapshot.
That's absoluly awesome and it's very simple too!
Many many thanks for this great tool. I have to think about to buy phonealarm now...
I'll try the standalone version today evening... maybe it's enough for me.
You can use the query.xml to do experiments and to locate the correct parameters and syntax.
But please pay attention, query.xml is just a name, you can put write access statements into this file and wrong statements could turn your device into a brick - backups are strongly recommended!
Mobile Profiler can do much more than reading and writing registry keys and values. It opens the system DMProcessConfigXML() API for common use - there are many options for this API as you can read here:
http://msdn.microsoft.com/library/d...ablecspsforwindowsmobile-baseddevicesozup.asp
Using phoneAlarm with Mobile Profiler is not a must, it's more comfortable - because of it's commandline interface it can be used with any phone profile switcher (PocketZenPhone maybe), which allows to execute external programs.
But there is one issue you should now:
profile switchers executes external programs after they have done with their job. If the profile switcher turns WiFi on, changing the IP parameters has no effect because WiFi is already on when Mobile Profiler sets the parameters. You have to switch WiFi on manually.
I'm working on a small user interface for Mobile Profilers so switching may be assigned to a hotkey.
So it should be possible to only use shortcut-icons on my desktop (today screen) to switch the profile of MobileProfiler directly, right?
And nearly everything what phonealarm does should even be possible with mobileProfiler as standalone too, not?
btw. you should think about to create a very small today plugin instead of using hotkeys
Yes you may put shortcuts anywhere.
The main difference between phone profile switchers and Mobile Profiler is that phone profile switcher emits system signals and opens connections. Some parameters only has effects after emitting a system signal.
Mobile Profiler is a passive tool - it can save and restore anything including ringtones, sound volume - but it doesn't emit any signal to the system and it doesn't open connections.
In phone profilers like phoneAlarm are many know how embedded - because of many device specific parameters you have to walk a hard way to uncover all parameters.
Tools like SK Tracker and registry editors may help you but belave me, it is complicated to substitute a phone profiler.
OK - done there is a new version 1.5 out now with a standalone mode.
You can call an editor directly from Mobile Profiler to edit files (after a small registry manipulation - look at the manual).
Hello,
I'm using the latest MobileProfile 2.2. I'm trying to use it to switch between dhcp ip and a ip fixed on the Wifi card.
I created the "create.snapshot" and it looks like this:
<?xml version="1.0" encoding="utf-16"?>
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic-query type="HKLM\Comm\TNETWLN1\Parms\Tcpip" />
</characteristic>
</wap-provisioningdoc>
Click to expand...
Click to collapse
With that snapshot I created 2 profiles, one for the dhcp and another for the ip fixed on the wifi "card". Both profiles are created without a single error:
Wifi DHCP On:
<?xml version="1.0" encoding="utf-16"?>
<wap-provisioningdoc>
<!-- remove old proxy entries -->
<nocharacteristic type="CM_ProxyEntries" />
<!-- reset the locklevel to fix the NEO backlight timeout bug -->
<characteristic type="Registry">
<characteristic type="HKCU\ControlPanel\BackLight\LockLevel">
<parm name="LockLevel" datatype="integer" value="0"/>
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\Comm\TNETWLN1\Parms\Tcpip">
<parm name="DNS" value=""/>
<parm name="DefaultGateway" value="0.0.0.0"/>
<parm name="Subnetmask" value="0.0.0.0"/>
<parm name="IpAddress" value="0.0.0.0"/>
<parm name="EnableDHCP" value="1"/>
<parm name="LeaseObtainedHigh" value="29816477"/>
<parm name="LeaseObtainedLow" value="1293063808"/>
<parm name="DhcpSubnetMask" value="255.255.255.0"/>
<parm name="DhcpIPAddress" value="192.168.100.103"/>
<parm name="T2" value="-1"/>
<parm name="T1" value="-1"/>
<parm name="Lease" value="-1"/>
<parm name="DhcpDNS" value="192.168.100.254"/>
<parm name="Domain" value="netcabo.pt"/>
<parm name="DhcpServer" value="192.168.100.254"/>
<parm name="AutoIP" value="169.254.22.86"/>
<parm name="AutoSeed" value="864635387"/>
<parm name="WINS" value=""/>
<parm name="AutoInterval" value="300"/>
<parm name="AutoMask" value="255.255.0.0"/>
<parm name="AutoSubnet" value="169.254.0.0"/>
<parm name="PrevReqOptions" value="BwEDBg8sLi8="/>
<parm name="AutoCfg" value="1"/>
<parm name="DhcpRetryDialogue" value="8"/>
<parm name="DhcpMaxRetry" value="21"/>
</characteristic>
</characteristic>
</wap-provisioningdoc>
Click to expand...
Click to collapse
Wifi Ip fixed:
<?xml version="1.0" encoding="utf-16"?>
<wap-provisioningdoc>
<!-- remove old proxy entries -->
<nocharacteristic type="CM_ProxyEntries" />
<!-- reset the locklevel to fix the NEO backlight timeout bug -->
<characteristic type="Registry">
<characteristic type="HKCU\ControlPanel\BackLight\LockLevel">
<parm name="LockLevel" datatype="integer" value="0"/>
</characteristic>
</characteristic>
<characteristic type="Registry">
<characteristic type="HKLM\Comm\TNETWLN1\Parms\Tcpip">
<parm name="DNS" value="192.168.1.64192.168.1.254"/>
<parm name="DefaultGateway" value="192.168.1.254"/>
<parm name="Subnetmask" value="255.255.255.0"/>
<parm name="IpAddress" value="192.168.1.125"/>
<parm name="EnableDHCP" value="0"/>
<parm name="LeaseObtainedHigh" value="29816477"/>
<parm name="LeaseObtainedLow" value="1293063808"/>
<parm name="DhcpSubnetMask" value="255.255.255.0"/>
<parm name="DhcpIPAddress" value="192.168.100.103"/>
<parm name="T2" value="-1"/>
<parm name="T1" value="-1"/>
<parm name="Lease" value="-1"/>
<parm name="DhcpDNS" value="192.168.100.254"/>
<parm name="Domain" value="netcabo.pt"/>
<parm name="DhcpServer" value="192.168.100.254"/>
<parm name="AutoIP" value="169.254.22.86"/>
<parm name="AutoSeed" value="864635387"/>
<parm name="WINS" value=""/>
<parm name="AutoInterval" value="300"/>
<parm name="AutoMask" value="255.255.0.0"/>
<parm name="AutoSubnet" value="169.254.0.0"/>
<parm name="PrevReqOptions" value="BwEDBg8sLi8="/>
<parm name="AutoCfg" value="1"/>
<parm name="DhcpRetryDialogue" value="8"/>
<parm name="DhcpMaxRetry" value="21"/>
</characteristic>
</characteristic>
</wap-provisioningdoc>
Click to expand...
Click to collapse
But when I run each profile, I get an error. And it's the same error for both profiles:
<characteristic type="HKLM\Comm\TNETWLN1\Parms\Tcpip">
<parm-error name="DNS" value="192.168.1.64192.168.1.254"/>
Click to expand...
Click to collapse
<characteristic type="HKLM\Comm\TNETWLN1\Parms\Tcpip">
<parm-error name="DNS" value=""/>
Click to expand...
Click to collapse
The error is located in the DNS value. Am I doing something wrong???
Please help me, cause I think I'm very near to the end...
Mobile Profiler is great! It can do manythings that phoneAlarm can't.
But when I try to set the TAPI Configuration Service Provider (Reference http://msdn2.microsoft.com/en-us/library/aa456217.aspx) options they don't change... Is there any trick to use it? Thanks a lot!

[27 Sep 08] Manila 2D on i780 + realVGA 96dpi

First of all thanks to herg62123 for beautiful Manila 2D engine.. I've been waiting on this to work on i780 since fisrt update.
Next, Thanks to Twolf and Havoc for their beautiful Manila 2D themes..
Thanks to Euphoria23, for sharing his HTCHomeSettings.xml. I've taken this as base and started editing few other tabs to fit i780 screen
Last but not least, G00ndu for 8his hardwork and beautiful MS2.1 themes for i780. He is inspiration for me to edit HTCHomeSettings.xml to work with i780.
Most of the tabs are now aligned to fit 320 width except the weather tab. I dont know how to fix this.. any takers. also tab headings are not centered. any help/fix in this regard highly appreciated.
I am newbie to this editing etc.. just to see this beautiful today plugin to work on i780 and hoping your help on remaining things to work perfectly on i780.
Insallation:
1. Install Manila 2D as explained in Update 16
http://forum.xda-developers.com/showpost.php?p=2277642&postcount=1.
2. Copy & replace files from Manila2D_i780.zip \windows dir
3. I've installed yellow theme by Havoc and some editing to fit i780 screen
Download Havoc theme from here
http://forum.xda-developers.com/showpost.php?p=2681346&postcount=924
4. Copy & replace files from HaVoC_Banana_Manilla2D_i780.zip to \windows dir
Enjoy Manila 2D on i780. Thanks
more screenshots
Great work!
but maybe you could do something about the weather icon on the weather tab, it's not centered. also the city text and the title text on all tabs.
Again, nice work!
Thanks!!!
Thanks a lot. That's exactly what I am after.
Great work!! Thanks
Finally tested Manilla2D in my i780 Any other themes adapted for it? For example with a different clock (digital) ? Thanks
Awesome work keep it up
Nice one mate ill try this out tomorrow!!
Great work!!!
Any news about working on Omnia???
spartakus said:
Great work!!!
Any news about working on Omnia???
Click to expand...
Click to collapse
It works fine. Go look in the man thread.
hi how about skin/clock themes? can u give list thrme and clock especially for i7c0 user?
Nice! Is it possible to make the shell work in near-fullscreen, i.e. without the bottom bar?
greatbal said:
Great work!
but maybe you could do something about the weather icon on the weather tab, it's not centered. also the city text and the title text on all tabs.
Again, nice work!
Click to expand...
Click to collapse
Hello,
replace the <WeatherWidget> HTCHomeSettings.xml for this:
<WeatherWidget>
<Property name="IDWEWG_LASTUPDATEBTN_RECT" id="0" value="160,100,70,15,147,40,151,15"/>
<Property name="IDWEWG_WEATHERBTN_RECT" id="1" value="4,47,232,60,4,47,312,60" />
<Property name="IDWEWG_LOCATIONBTN_RECT" id="2" value="4,51,232,200,4,136,212,23" />
<Property name="IDWEWG_STATUSTXT_RECT" id="3" value="15,91,210,60,15,51,290,60" />
<Property name="IDWEWG_LOCATIONTXT_RECT" id="4" value="15,121,210,22,15,118,290,22" />
<Property name="IDWEWG_LASTUPDATETXT_RECT" id="5" value="156,100,82,15,147,55,151,15" />
<Property name="IDWEWG_ADDCITYTXT_RECT" id="6" value="15,51,210,60,15,51,290,60" />
<Property name="IDWEWG_ARROWTXT_RECT" id="7" value="0,28,10,13,0,28,10,13" />
<Property name="IDWEWG_TEMPERATURETXT_RECT" id="8" value="8,33,80,40,15,33,80,40" />
<Property name="IDWEWG_DOWNARROWRELEASE_IMGID" id="9" value="83" />
<Property name="IDWEWG_DOWNARROWPRESS_IMGID" id="10" value="82" />
<Property name="IDWEWG_REFRESH_IMGID" id="11" value="84" />
<Property name="IDWEWG_SEPERATELINE_IMGID" id="12" value="86" />
<Property name="IDWEWG_DOWNARROW_POS" id="14" value="216,116,307,74" />
<Property name="IDWEWG_UPARROW_POS" id="15" value="216,90,307,60" />
<Property name="IDWEWG_REFRESH_POS" id="16" value="220,116,300,10" />
<Property name="IDWEWG_WEATHER_POS" id="17" value="0,0,90,25" />
<Property name="IDWEWG_SEPERATELINE_POS" id="18" value="0,210,0,210" />
<Property name="IDWEWG_HIGHTEMPTEXT_TODAY_RECT" id="19" value="8,78,60,15,8,78,60,15" />
<Property name="IDWEWG_LOWTEMPTEXT_TODAY_RECT" id="20" value="8,93,60,15,8,93,60,15" />
<Property name="IDWEWG_DAYTEXT_WEEK_RECT" id="27" value="0,4,100,12,0,5,100,25" />
<Property name="IDWEWG_HIGHTEMPTEXT_WEEK_RECT" id="28" value="0,0,26,15,175,5,30,15" />
<Property name="IDWEWG_LOWTEMPTEXT_WEEK_RECT" id="29" value="0,0,26,15,210,5,25,15" />
<Property name="IDWEWG_SEPERATELINE_IMGID_P" id="30" value="116" />
<Property name="IDWEWG_SEPERATELINE_POS1" id="31" value="47,143,38,140" />
<Property name="IDWEWG_SEPERATELINE_POS2" id="32" value="0,166,0,158" />
<Property name="IDWEWG_LOCATIONINDEXTXT_RECT" id="33" value="205,100,34,20,0,0,0,0" />
<Property name="IDWEWG_FORECASTCONTROL_RECT" id="34" value="0,0,0,62,0,0,0,62" />
<Property name="IDWEWG_LASTUPDATETITLE_RECT" id="35" value="135,38,105,15,147,40,151,15" />
<Property name="IDWEWG_SEPERATELINE1_IMGID" id="36" value="197" />
<Property name="IDWEWG_SEPERATELINE2_IMGID" id="37" value="198" />
<Property name="IDWEWG_WEATHERTEXT_RECT" id="38" value="0,200,320,22,15,136,290,22" />
<Property name="IDWEWG_UPARROWRELEASE_IMGID" id="39" value="85" />
<Property name="IDWEWG_UPARROWPRESS_IMGID" id="40" value="84" />
</WeatherWidget>
Heh... great piece of work!! Will be giving it a try man!! Looks great, and let me see if I can help to improve.
Many many thanks for sharing and contributing, and spending your time for the i780 community.
works fine on my i780
but how about others skin and clock??

			
				

			
				
SMRocket said:
Hello,
replace the <WeatherWidget> HTCHomeSettings.xml for this:
<WeatherWidget>
<Property name="IDWEWG_LASTUPDATEBTN_RECT" id="0" value="160,100,70,15,147,40,151,15"/>
<Property name="IDWEWG_WEATHERBTN_RECT" id="1" value="4,47,232,60,4,47,312,60" />
<Property name="IDWEWG_LOCATIONBTN_RECT" id="2" value="4,51,232,200,4,136,212,23" />
<Property name="IDWEWG_STATUSTXT_RECT" id="3" value="15,91,210,60,15,51,290,60" />
<Property name="IDWEWG_LOCATIONTXT_RECT" id="4" value="15,121,210,22,15,118,290,22" />
<Property name="IDWEWG_LASTUPDATETXT_RECT" id="5" value="156,100,82,15,147,55,151,15" />
<Property name="IDWEWG_ADDCITYTXT_RECT" id="6" value="15,51,210,60,15,51,290,60" />
<Property name="IDWEWG_ARROWTXT_RECT" id="7" value="0,28,10,13,0,28,10,13" />
<Property name="IDWEWG_TEMPERATURETXT_RECT" id="8" value="8,33,80,40,15,33,80,40" />
<Property name="IDWEWG_DOWNARROWRELEASE_IMGID" id="9" value="83" />
<Property name="IDWEWG_DOWNARROWPRESS_IMGID" id="10" value="82" />
<Property name="IDWEWG_REFRESH_IMGID" id="11" value="84" />
<Property name="IDWEWG_SEPERATELINE_IMGID" id="12" value="86" />
<Property name="IDWEWG_DOWNARROW_POS" id="14" value="216,116,307,74" />
<Property name="IDWEWG_UPARROW_POS" id="15" value="216,90,307,60" />
<Property name="IDWEWG_REFRESH_POS" id="16" value="220,116,300,10" />
<Property name="IDWEWG_WEATHER_POS" id="17" value="0,0,90,25" />
<Property name="IDWEWG_SEPERATELINE_POS" id="18" value="0,210,0,210" />
<Property name="IDWEWG_HIGHTEMPTEXT_TODAY_RECT" id="19" value="8,78,60,15,8,78,60,15" />
<Property name="IDWEWG_LOWTEMPTEXT_TODAY_RECT" id="20" value="8,93,60,15,8,93,60,15" />
<Property name="IDWEWG_DAYTEXT_WEEK_RECT" id="27" value="0,4,100,12,0,5,100,25" />
<Property name="IDWEWG_HIGHTEMPTEXT_WEEK_RECT" id="28" value="0,0,26,15,175,5,30,15" />
<Property name="IDWEWG_LOWTEMPTEXT_WEEK_RECT" id="29" value="0,0,26,15,210,5,25,15" />
<Property name="IDWEWG_SEPERATELINE_IMGID_P" id="30" value="116" />
<Property name="IDWEWG_SEPERATELINE_POS1" id="31" value="47,143,38,140" />
<Property name="IDWEWG_SEPERATELINE_POS2" id="32" value="0,166,0,158" />
<Property name="IDWEWG_LOCATIONINDEXTXT_RECT" id="33" value="205,100,34,20,0,0,0,0" />
<Property name="IDWEWG_FORECASTCONTROL_RECT" id="34" value="0,0,0,62,0,0,0,62" />
<Property name="IDWEWG_LASTUPDATETITLE_RECT" id="35" value="135,38,105,15,147,40,151,15" />
<Property name="IDWEWG_SEPERATELINE1_IMGID" id="36" value="197" />
<Property name="IDWEWG_SEPERATELINE2_IMGID" id="37" value="198" />
<Property name="IDWEWG_WEATHERTEXT_RECT" id="38" value="0,200,320,22,15,136,290,22" />
<Property name="IDWEWG_UPARROWRELEASE_IMGID" id="39" value="85" />
<Property name="IDWEWG_UPARROWPRESS_IMGID" id="40" value="84" />
</WeatherWidget>
Click to expand...
Click to collapse
yes u rock man... but can u edit too this part?
Xda font make alittle upper
sorry for my poor english

			
				
monyozt said:
yes u rock man... but can u edit too this part?
Xda font make alittle upper
sorry for my poor english
Click to expand...
Click to collapse
Hello,
you would like to see all the letters in uppercase?

			
				
I think he meant that the "line" with XDA-Dev should be moved upwards a little bit - in the image it is slightly covered.
Tilleke
SMRocket said:
Hello,
you would like to see all the letters in uppercase?
Click to expand...
Click to collapse

			
				
What's the possibility of this working on an 800w?

			
			
			
			
			
			


				
			
			
			
			
			

			
		

	
		

			
White Wm6.1 theme
			
			
			
				
hi, i wonder if someone can help me to do a white wm6.1 theme, i figured out that the .tsk file can be open if i change the file attribute to .zip, in the folder and i get this 7 files:
_setup.xml - with regkeys ?
blabla.inf - also regkeys?
and the other files is just images,
I try to change the binary color codes in the xml file, but i dont get any god result. I change the orginal htc black theme, bacuse it have a solid bottom and top bar, i only change in the xml file, i dont know how to edit the inf file, must i change the both? Also i wonder what all things are, like " Color_SoftkeyFlatCenter" and "34" and so on.
her is a bit of the xml code:
Code:
<characteristic type="Registry">
<characteristic type="HKCU\Software\Microsoft\Today\HTC Black.tsk">
<parm name="Color_Highlight" value="WqIAAA==" datatype="binary" />
<parm name="Color_HighlightText" value="AAAAAA==" datatype="binary" />
<parm name="Color_SoftkeyFlat" value="////AA==" datatype="binary" />
<parm name="Color_SoftkeyFlatCenter" value="////AA==" datatype="binary" />
<parm name="Color_TitleFlat" value="////AA==" datatype="binary" />
<parm name="Color_TitleFlatCenter" value="////AA==" datatype="binary" />
<parm name="Color_CommandBar" value="////AA==" datatype="binary" />
<parm name="Color_CommandBarText" value="AAAAAA==" datatype="binary" />
<parm name="Color_CommandBarText_Highlight" value="AAAAAA==" datatype="binary" />
<parm name="Color_NavBarText_Highlight" value="AAAAAA==" datatype="binary" />
<parm name="Color_CommandBar_Highlight" value="AAAAAA==" datatype="binary" />
<parm name="Color_NavBar_Highlight" value="AAAAAA==" datatype="binary" />
<parm name="Color_SoftkeyFlatCenter_Highlight" value="AAAAAA==" datatype="binary" />
<parm name="Color_SoftkeyFlat_Highlight" value="AAAAAA==" datatype="binary" />
<parm name="Color_CommandBarSip_Highlight" value="AAAAAA==" datatype="binary" />
<parm name="Color_CaptionFlat" value="AAAAAA==" datatype="binary" />
<parm name="Color_SoftkeyBtnFace" value="AAAAAA==" datatype="binary" />
</characteristic>
<characteristic type="HKLM\Software\Microsoft\Color">
<parm name="4" value="////AA==" datatype="binary" />
<parm name="5" value="////AA==" datatype="binary" />
<parm name="6" value="////AA==" datatype="binary" />
<parm name="8" value="////AA==" datatype="binary" />
<parm name="9" value="AAAAAA==" datatype="binary" />
<parm name="13" value="////AA==" datatype="binary" />
<parm name="14" value="////AA==" datatype="binary" />
<parm name="25" value="////AA==" datatype="binary" />
<parm name="26" value="////AA==" datatype="binary" />
<parm name="33" value="LCwsAA==" datatype="binary" />
<parm name="34" value="WqIAAA==" datatype="binary" />
<parm name="35" value="////AA==" datatype="binary" />
<parm name="39" value="AAAAAA==" datatype="binary" />
</characteristic>
</characteristic>
I hope someone will help me

			
				
I've spent ages trying to customize a theme for my Diamond, with partial success.
The best theme editor I've seen is ThemeGenCE, however it is far from perfect, not to mention confusingly designed.
The main problem seems to be that that there are far more items in WM6, each having their own colour settings, than there are settings in ThemeGenCE. You will also need to start with a different theme file because the program will not handle the HTC Black theme.
I created my own theme including wallpapers in ThemeGenCE and then used other software on the Diamond to tweak more of the unhandled colours. I'm using a software bundle called UI Tweaker to set many of the colours (including the solid task bars) and another program called RC Mod to set the colour of selected today items.
The problem with this approach is that I will lose my changes if I flash, hard reset or even switch themes and there are still some settings that are not handled. It's shocking that MS have not bundled all of the relevant settings together in a colour control panel applet. Even Windows 3.1 had one.
HTH.
Edit: I've just checked and it looks like the only solid task bar colour possible is black. I don't know why, but I think this is crappy backwards-compatible design by MS.

			
				
ThemeGenCE
RichardTenggren said:
hi, i wonder if someone can help me to do a white wm6.1 theme
Click to expand...
Click to collapse
Could you explain what you really want ? I maybe able to help you.
Davey101 said:
The best theme editor I've seen is ThemeGenCE, however it is far from perfect, not to mention confusingly designed.
Click to expand...
Click to collapse
Confusingly designed ! It is because when I began to write it, that was initially for WM 2003... I gradually adapt it for WM5 & WM6.
Sorry to be confusing...

			
				
BenThon,
I'm trying to change the start menu highlight color in the HTC black theme from green to grey. Do you know a quick way to do this? Thanks for your help.

			
				
taiwankid said:
BenThon,
I'm trying to change the start menu highlight color in the HTC black theme from green to grey. Do you know a quick way to do this? Thanks for your help.
Click to expand...
Click to collapse
let me know if it is what you're lookin for

			
				
BenThon said:
Could you explain what you really want ? I maybe able to help you.
Confusingly designed ! It is because when I began to write it, that was initially for WM 2003... I gradually adapt it for WM5 & WM6.
Sorry to be confusing...
Click to expand...
Click to collapse
It would be very nice of you if you could do it
That i want it a white solid top and bottom bar, i have a white background image, so i will match it with the top and bottombar, i will also have the startmenubackground white, and the text colors black. Thus that i want is an inverted htc black theme

			
				
alfoalfo said:
let me know if it is what you're lookin for
Click to expand...
Click to collapse
TIM.tsk.zip
Sorry but your theme is not conventional :
Code:
[SIZE=1][SourceDisksFiles][/SIZE]
[SIZE=1]stwater.jpg = 2 ; 001[/SIZE]
[SIZE=1]"tdywater_480_640.png" = 2 ; 002[/SIZE]
[SIZE=1]"tdywater_640_480.png" = 2 ; 003[/SIZE]
[SIZE=1]"stwater_480_640.png" = 2 ; 004[/SIZE]
[SIZE=1]"stwater_640_480.png" = 2 ; 005[/SIZE]
stwater.jpg is mixed with specific files for VGA themes.
My program ThemeGenCE does not recognized this theme (only my beta !).
And Registry settings :
Code:
[SIZE=1]HKCU,%reg_path01%,DPI,0x00010001,192
HKCU,%reg_path01%,UseStartImage,0x00010001,0
HKLM,%reg_path02%,4,0x00000001,FF,FF,FF,00
HKLM,%reg_path02%,5,0x00000001,00,00,00,00
HKLM,%reg_path02%,6,0x00000001,00,00,00,00
HKLM,%reg_path02%,7,0x00000001,00,00,00,00
HKLM,%reg_path02%,38,0x00000001,80,80,80,00
HKLM,%reg_path02%,39,0x00000001,FF,FF,FF,00
HKLM,%reg_path02%,40,0x00000001,80,80,80,00
HKCU,%reg_path00%,Color_SoftkeyFlatCenter,0x00000001,00,00,00,00
HKCU,%reg_path00%,Color_TitleFlatCenter,0x00000001,00,00,00,00
[/SIZE]
for bottom and top bars are blacks.

			
				
BenThon said:
TIM.tsk.zip
Sorry but your theme is not conventional :
Code:
[SIZE=1][SourceDisksFiles][/SIZE]
[SIZE=1]stwater.jpg = 2 ; 001[/SIZE]
[SIZE=1]"tdywater_480_640.png" = 2 ; 002[/SIZE]
[SIZE=1]"tdywater_640_480.png" = 2 ; 003[/SIZE]
[SIZE=1]"stwater_480_640.png" = 2 ; 004[/SIZE]
[SIZE=1]"stwater_640_480.png" = 2 ; 005[/SIZE]
stwater.jpg is mixed with specific files for VGA themes.
My program ThemeGenCE does not recognized this theme (only my beta !).
And Registry settings :
Code:
[SIZE=1]HKCU,%reg_path01%,DPI,0x00010001,192
HKCU,%reg_path01%,UseStartImage,0x00010001,0
HKLM,%reg_path02%,4,0x00000001,FF,FF,FF,00
HKLM,%reg_path02%,5,0x00000001,00,00,00,00
HKLM,%reg_path02%,6,0x00000001,00,00,00,00
HKLM,%reg_path02%,7,0x00000001,00,00,00,00
HKLM,%reg_path02%,38,0x00000001,80,80,80,00
HKLM,%reg_path02%,39,0x00000001,FF,FF,FF,00
HKLM,%reg_path02%,40,0x00000001,80,80,80,00
HKCU,%reg_path00%,Color_SoftkeyFlatCenter,0x00000001,00,00,00,00
HKCU,%reg_path00%,Color_TitleFlatCenter,0x00000001,00,00,00,00
[/SIZE]
for bottom and top bars are blacks.
Click to expand...
Click to collapse
is this your answare to me or could u help me with it?

			
				
RichardTenggren said:
is this your answare to me or could u help me with it?
Click to expand...
Click to collapse
I send you a PM ... Have a look to your box.

			
				
its impossible to make white tsk theme...
xml is confusing, try MSCEInf (from poster above). its useful
also look here:
http://forum.xda-developers.com/showthread.php?t=439400

			
				
Idont understand why it cant be white? My tought was to only change the color code on the titlebar and bottombar on the htc black theme. Does it work with wm5 themes? I only want i white, the design dosent matter

			
				
its impossible to create a white theme unless you use something like wisbar

			
				
"Edit: I've just checked and it looks like the only solid task bar colour possible is black. I don't know why, but I think this is crappy backwards-compatible design by MS."
I have managed to get perfect white upper and lower bars. The only thing that is impossible for me to do is change all the icons in the upper bar to black (such as 3g, wifi, signal strength indicator, battery indicator...etc.. can't seem to locate where in the registry all those items are at.

			
			
			
			
			
			
			
			



			
			
			

			
		

	
		

			
Screen sensitivity
			
			
			
				
Hi
I heard about changing the values for screen sensitvity to the Touch HD, and found this thread
Has anybody figured out how to change the screen sensitivity for the topaz in the registry?
______________________________
Topaz
ROM: Duttys Sense 2.5 H-Grail R6 WWE

			
				
jkolner said:
Hi
I heard about changing the values for screen sensitvity to the Touch HD, and found this thread
Has anybody figured out how to change the screen sensitivity for the topaz in the registry?
______________________________
Topaz
ROM: Duttys Sense 2.5 H-Grail R6 WWE
Click to expand...
Click to collapse
..try these two keys:
RegWriteDWord("HKLM","\Software\OEM\TFLOSettings\","FingerPressure",-1)
RegWriteDWord("HKLM","\Drivers\TouchPanel\", "PressureThreshold",-1)

			
				
slider-changings
cyron_at said:
..try these two keys:
RegWriteDWord("HKLM","\Software\OEM\TFLOSettings\","FingerPressure",-1)
RegWriteDWord("HKLM","\Drivers\TouchPanel\", "PressureThreshold",-1)
Click to expand...
Click to collapse
thxs for the info - but what wil these keys change while setting them to -1 ???
my topaz slides a little too fast right now for me.
thxs

			
				
Improved Touch Screen Sensitivity Cab
I've installed this cab and I'm not quite sure what reg keys it changed, but the screen sensitivity seems improved. I got this cab from xda awhile ago.
Chris

			
				
cmart4 said:
I've installed this cab and I'm not quite sure what reg keys it changed, but the screen sensitivity seems improved. I got this cab from xda awhile ago.
Chris
Click to expand...
Click to collapse
..just open the cab with winrar...open the file _setup.xml:
These are the reg. entrys:
- <characteristic type="HKLM\Software\OEM\TFLOSettings\EnlargedBar">
<parm name="EnableLargeBar" value="0" datatype="integer" />
</characteristic>
- <characteristic type="HKLM\Software\OEM\TFLOSettings">
<parm name="FingerPressure" value="12016" datatype="integer" />
<parm name="EnableSound" value="0" datatype="integer" />
<parm name="EnableLargeMenu" value="1" datatype="integer" />
<parm name="EnableCube" value="1" datatype="integer" />
<parm name="EnableScroll" value="1" datatype="integer" />
<parm name="SourceArea_Bottom" value="22" datatype="integer" />
<parm name="SourceArea_Top" value="4" datatype="integer" />

			
				
Thxs a lot!

			
				
cmart4 said:
I've installed this cab .................... sensitivity seems improved. I got this cab from xda awhile ago. Chris
Click to expand...
Click to collapse
Dear Chris - Thxs a lot!

			
				
Can I use this CAB file for Diamond2 ?

			
				
mhd1360 said:
Can I use this CAB file for Diamond2 ?
Click to expand...
Click to collapse
Works fine for my Diamond 2.

			
				
seeraeuber said:
Dear Chris - Thxs a lot!
Click to expand...
Click to collapse
My pleasure!
Chris

			
			
			
			
			
			
			
			
			
			



			

			
		

	
		

			
Data connection turns off sporadically
			
			
			
				
Anyone else have this problem? Doesn't matter if the phone is idle or in use, the data connection just turns off. It doesn't have to do with it being a bad connection either because it does it at my house all of the time and I'm 3G'in with full bars there.
I didn't notice it with the old ROM. I'm running stock 2.13 ROM with CHT 1.8 and editor, 3d driver cab and zim's touch sensitiviy cab.
This is different than the known issue where the data goes out and you lose your passwords and mail account settings, then have to reset up the data connection.
It basically just turns off the data and if you turn it back on in the wireless settings, it's fine... Seems too random for it to be something put in place by Tmobile.
Any ideas?

			
				
Hey crisis
I'm still running the originial 2.10 stock rom, but I've noticed that happening occasionally on mine as well, especially right after closing opera (9.7), and at a few other inconsistent times too.
It seems like it started soon after I installed several utility tweaks, including the "touch_x power management on" cab, which enables several power management modes across the phone but doesn't specify exactly what each one does. However, I seem to recall that activating those same memory managment features in my TP2 caused it to shut off he data when it was idle just like this. Have you run that cab? I'll paste the reg values it changes, so you can check to see if any of yours are that way...might have gotten changed even if you didn't run the cab. The "L2TP1" and "PPTP1" keys are where I would start.
characteristic type="HKLM\Comm\AsyncMac1\Parms">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
- <characteristic type="HKLM\Comm\L2TP1\Parms">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
- <characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\MMC_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
- <characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\MMC_Class\High_Capacity">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
- <characteristic type="HKLM\Comm\PPTP1\Parms">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
- <characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class">
<parm name="DisablePowerManagement" value="0" datatype="integer" />
</characteristic>
- <characteristic type="HKLM\Drivers\SDCARD\ClientDrivers\Class\SDMemory_Class\High_Capacity">
<parm name="DisablePowerManagement" value="0" datatype="integer"
Click to expand...
Click to collapse

			
				
Thanks! I'll check it out and post back what I find. It's very possible that it is happening when I shut Opera down. I just haven't pin pointed exactly when it's happening. I like the idea of it turning off to save battery life if I'm not using it, but want to know that is, in fact, what is actually happening... Hasn't caused me any real problems yet.
I haven't installed the power management cab... I'm starting to think maybe it's part of the new CHT maybe? I'm gonna dig through that thread and see if I find anything on it.

			
				
I have noticed when I idle my phone for a while and just listen to music and have to power off on my phone it does that. I dont think it is a big deal. T-mobile I guess charges for data by minutes used I think. I notice when I hit the taskbar it shows a counter when i am using data. I think if I had everything set to update automatically like every hour I dont think it would go into that "idle" state. I turned everything to manual because I dont want my battery to drain when it is constantly updating.

			
				
I have noticed this but it has nothing to do with opera. I don't know what causes it but I have to constantly go in and it'll say data connection off and then I go to turn it on and it stays off then I gotta click it again to turn it on. it's almost like the software thinks it's off but it's still on.

			
			
			
			
			
			
			
			
			
			

			
		

	
	
	



	
	







			

		



		

		

			
Resources