Hi,
I have a problem with TT7 on my HD2.
After installing TT7, the phone starts up with an error message: BTTray something is not a valid program.
And that disables Bluetooth completely.
I wonder if anyone else has this problem and if there's a fix for it.
The TT version is 7.916.9189
Any suggestions appreciated,
M.
Delete/rename \Windows\BtSdkCE30.dll and \Windows\BtCoreIf.dll
Then soft reset
Exlo said:
Delete/rename \Windows\BtSdkCE30.dll and \Windows\BtCoreIf.dll
Then soft reset
Click to expand...
Click to collapse
Hi Exlo,
I didn't find BtSdkCE30, do have a BtSdkCE50 instead, but wasn't sure if that should be deleted as well.
I've deleted the BtCoreIf.dll and although Bluetooth still works after installation, TT doesn't run: Invalid Windows Mobile version.
M.
same
Hello,
I've had the exactly same problem that you have, I couldn't find any solution so I just made an Hard reset after having saved all my pim data with My phone. If you can't find a solution maybe you should do so.
Good luck there.
seagle77 said:
Hello,
I've had the exactly same problem that you have, I couldn't find any solution so I just made an Hard reset after having saved all my pim data with My phone. If you can't find a solution maybe you should do so.
Good luck there.
Click to expand...
Click to collapse
TomTom overwrites 2 files:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
renaming these 2 files (add .bak extension or something) and performing a soft reset should restore the default dll's and fix the problem.
If that doesn't work:
I used a cab file for TTN that's HD2 specific.
Don't recall where I found it (usenet maybe, or through a messageboard), but it skips the bluetooth dll installation.
Filename of th cab I have used: HTC_HD2_TomTom_7.916.9189_vga_black_nobt.cab
Well known problem
This is nothing new. TomTom installs have been doing this since version 6. You'll need to 'Show all files' in File Explorer to see the BtCoreIf.dll and the BtSdkCE30.dll or you can use something like Total Commander.
I've done this on many devices and it all works fine so long as you delete these 2 files and then soft reset. DON'T delete anything else though!!!! That'll probably screw your Bluetooth up.
i found that tomtom stops my FM radio working!
Yes TomTom messed up my Bluetooth, FM radio and ?WiFi too.
I was only a day or to into my ownership so didn't mind a hard reset.
I copied all TomTom related files to the storage card before the hard reset.
When it rebooted I copied the navigator.exe as a short cut to the start menu. It has worked perfectly since.
flunkyou2 said:
i found that tomtom stops my FM radio working!
Click to expand...
Click to collapse
Could you tell me on what type of phone that happened?
I just renamed the \Windows\BtCoreIf.dll then everything was working again
[Silly question deleted]
kaospiloten said:
I just renamed the \Windows\BtCoreIf.dll then everything was working again
Click to expand...
Click to collapse
Same thing here. I renamed to btcoreif.dll.old, did a soft reboot and no more error messages. also my bluetooth now works again.
Thanks for the solution!
thebishops said:
This is nothing new. TomTom installs have been doing this since version 6. You'll need to 'Show all files' in File Explorer to see the BtCoreIf.dll and the BtSdkCE30.dll or you can use something like Total Commander.
I've done this on many devices and it all works fine so long as you delete these 2 files and then soft reset. DON'T delete anything else though!!!! That'll probably screw your Bluetooth up.
Click to expand...
Click to collapse
Got same problem here...
I've renamed BtCoreIf.dll, deleted BtSdkCE30.dll using default WM file explorer displaying all files and rebooted the device.
Works perfectly! FM radio too
Thanks.
Related
Hi,
My HP 6915, when i make a soft-reset doesn´t ring and does not assume the changes, for it to ring.
i can´t resolve with hard reset because it still the same.
did anyone had the same problem?
thanks
did you recently plug in the headset? If so try plugging it it in again and take it out slowly (sometimes the contact has been known to get stuck)
Did you install TOmTOm on it, there is a known issue with sound after installing this app. This is what solved it for me:
I have found a solution to the issue with TomTom 6. When it installs, it overwrites two dlls in the PPCs Windows directory, BtCoreIf.dll and BtSdkCE30.dll. Immediately after TT6 install rename each of these to .old, or delete each file. Windows automatically re-installs the originals. Do a soft reset and all then works ok.
eastdick said:
Did you install TOmTOm on it, there is a known issue with sound after installing this app. This is what solved it for me:
I have found a solution to the issue with TomTom 6. When it installs, it overwrites two dlls in the PPCs Windows directory, BtCoreIf.dll and BtSdkCE30.dll. Immediately after TT6 install rename each of these to .old, or delete each file. Windows automatically re-installs the originals. Do a soft reset and all then works ok.
Click to expand...
Click to collapse
Hello! i am reviving this thread, because i also have a sable 6915 and recently after a day of normal operation the phone stopped giving sound. The only thing different was that i had the CPU overclocked to a safe setting on "pocket hack master: 520 mhz".
I tried hard reseting with no luck... I don't think that it has to do with hardware, but you just never know...
anyone else with the same problem, that found a solution?
Could any kind person post me or email me a copy of BTtrayCE for TP2 as I accidentaly deleted mine and now I can't use Bluetooth.
Info of the file path would also be appreciated.
Thanks in advance.
File attached
Hi clark97
That's wierd because normally if you delete a file in the ROM you just soft reset and it appears back.
Cheers
andrew-in-woking
Cheers , read in another post its because I installed tom tom 7.450 which overwrote it, for some reason a soft reset isn't enough and you need to either recopy or hard reset.
Thanks for reply
Clark
did you get your bluetooth working again? i have the same problem, Tomtom has killed it! Hard reset seems to be the only way to get it back on....
BTTrayCE.exe you will find this file in the \windows\ folder and a link in
autostart(i have delete it, i dont need everytime bluetooth on,
i have a link in the programm folder),
B2T.
when TT overwrite it, normally you can delete it(with TC or Resco)
after a Softreset you have the original BTTrayCE.exe back...
blader said:
did you get your bluetooth working again? i have the same problem, Tomtom has killed it! Hard reset seems to be the only way to get it back on....
Click to expand...
Click to collapse
http://www.htcforums.com/touch-pro2-rhodium-f37/bttrayce-error-after-soft-reset-t2438.html
I had the same problem myself but found the answer on this forum:
TOMTOM places a new BT dlls under the windows folder that I had to remove:
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
You can either ename them or remove them and then soft restart your Touch Pro 2 and everything will go back to normal.
Click to expand...
Click to collapse
I personally renamed them, being slightly nervous about deleting files in the Windows folder: still, it worked for me and evidently this fellow on the HTCForums website
Paulplex said:
http://www.htcforums.com/touch-pro2-rhodium-f37/bttrayce-error-after-soft-reset-t2438.html
I had the same problem myself but found the answer on this forum:
I personally renamed them, being slightly nervous about deleting files in the Windows folder: still, it worked for me and evidently this fellow on the HTCForums website
Click to expand...
Click to collapse
Thx a lot !
Lost my BTTrayCe.exe (in fact, not that lost, rather the phone told me : "BTTrayCe.exe is not a valid WM application") after installing TT7.
After renaming the file all came back to normal.
So once again : thank you !
Thank you, that solved my father's problem
Problem solved.
Hi,
I had the same problem after installing TT7.
After renaming the two .dll files all was fixed after a soft reset.
Thanks you guys for your great advise and work.
With regards,
San
thanks alots
TT7 Fix!
Thanks for the Quick Fix!!!!
Where are these files!??!
I'm about to smash this phone!
tibbyltd said:
Where are these files!??!
I'm about to smash this phone!
Click to expand...
Click to collapse
Did you read the thread? It was clearly stated where this file is located.
helps me to thanks!
Can't seem to get the FM Radio to work, the application seems to be busy when starting-up then crashes soon after (just closing down with no errors). has anyone else experienced these issues on the HD2.
thanks
Did you install TomTom?
Radio crashes and
I installed TotTom but the radio didnt work before that, any suggestions.
I even have problem with bluetoth, cant start bt.
After reestart It say:
BTTrayce is not a valid pocketPc-program. And i really need btoth.
\\ Spacetower
Once you installed TomTom, and even removed it, you will keep having this problem.
TomTom updated the BtCoreIf.dll and BtSdkCE30.dll with their own, and will cause the BT and for some reason FM radio not to work.
Again.. Unistalling TomTom will not fix the problem as it does not replaces the BtCoreIf.dll and BtSdkCE30.dll
Only solution (that work for me) was a factory reset..
But as your radio did not work before the TomTom install I guess that you have an other problem.
Did you try the radio when the unit was still with the factory software (clean)?
I have TomTom installed and is working fine for me.
But reception quality is poor, much worse than i had with HTC Artemis long time ago :-(
Spacetower said:
I installed TotTom but the radio didnt work before that, any suggestions.
I even have problem with bluetoth, cant start bt.
After reestart It say:
BTTrayce is not a valid pocketPc-program. And i really need btoth.
\\ Spacetower
Click to expand...
Click to collapse
I had a similar issue, just remove BTTrayce from Windows/Startup it dosent seem to effect the use of tomtom.
Nb. I did install tomtom on my device and just discovered Bluetooth also dosent work now!!
Could you please post a copy of BtCoreIf.dll and BtSdkCE30.dll so i can try and restore the originals and let others know if it fixes the issue. thanks
htc-hd2 said:
Once you installed TomTom, and even removed it, you will keep having this problem.
TomTom updated the BtCoreIf.dll and BtSdkCE30.dll with their own, and will cause the BT and for some reason FM radio not to work.
Again.. Unistalling TomTom will not fix the problem as it does not replaces the BtCoreIf.dll and BtSdkCE30.dll
Only solution (that work for me) was a factory reset..
But as your radio did not work before the TomTom install I guess that you have an other problem.
Did you try the radio when the unit was still with the factory software (clean)?
Click to expand...
Click to collapse
I wish that I could help you, but it will not let me copy the BtCoreIf.dll file. (permission denied)
As for the BtSdkCE30.dll file. It's not on my system. I guess that this file is not needed.
Reset to factory settings.
I didnt try radio before i installed tomtom.
So now i am going to do it the easy way, factory reset and try all proggs before i install my favorite apps.
By the way, it seems to be a very nice phone
Thanx all for quick replays
\\ Spacetower
Now after factory reset everything seems to work.
I wonder if i dare to install tomtom....
Spacetower said:
I didnt try radio before i installed tomtom.
So now i am going to do it the easy way, factory reset and try all proggs before i install my favorite apps.
By the way, it seems to be a very nice phone
Thanx all for quick replays
\\ Spacetower
Now after factory reset everything seems to work.
I wonder if i dare to install tomtom....
Click to expand...
Click to collapse
Just remove the two "bad" files from the tomtom .cab file before you install it.
The files that need to be removed are "BtCoreIf.dll and BtSdkCE30.dll"
Use "WinCE CAB Manager" to do the job (google WinCE CAB Manager)
Ok, i try that.
I let you know how it goes...
\\ Spacetower
Now i installed TomTom and i did a rebuild before without the bt files and it works great, thanx m8.
\\ Spacetower
Hi.
I am having some trouble with my LEO!
When I try to enable bluetooth trough comm manager, I recive a message that says "can not enable bluetooth".
When I am going on advanced settings menu and touch the bluetooth icon it gets highlighted but nothing happends. All others connections and icon do work perfect.
I have had my device for 3 days, and have never tryed bluetooth on it before. I have stock ROM on it.
Hope that someone can help me with this problem.
Sorry for crappy english! =)
Do you have TomTom installed on your machine? That navigation software can screw up the Bluetooth stack on the HD2 by installing and overwriting WM stock bluetooth files...
Drakknar said:
Do you have TomTom installed on your machine? That navigation software can screw up the Bluetooth stack on the HD2 by installing and overwriting WM stock bluetooth files...
Click to expand...
Click to collapse
Yes, I have tomtom installed. Is my only option hard reset, and never use tomtom again?
When device is starting up I got a warning: BTTrayCE.exe is not a valid pocket PC program.
Any ideas?
It's very simple to fix this:
remove BtCoreIf.dll from Windows folder and softreset.
ghale said:
It's very simple to fix this:
remove BtCoreIf.dll from Windows folder and softreset.
Click to expand...
Click to collapse
Thank you so much! It is working perfect now! =)
You're welcome.
Same problem, trying to apply the same solution, but can't delete the file. I've tried with Total Commander but it says it can't! Any ideas what the 'user error' here is?
Please check if the attribute of the file is ROM.
If is ROM, then you have the original file.
If ROM is not set, then try to soft-reset the device then with the native file manager choose "Show all files" and delete the file.
Then soft-reset again.
It is read only, system and in ROM according to Total Commander. The native file explorer has now lost the delete option completely! Properly stuck now!
It's a normal behaviour of the file Explorer. You can't delete a ROM file.
You have the original file.
Try to delete BTTrayCE.exe, then and then restart.
It will be restored automagically.
Let me know.
That is also a ROM file and won't delete.
Ah!
I don't know, then, what is the problem.
What type of issue you have on your mobile?
Exactly the same as the OP, when the phone starts it has a Bluetooth Error, then won't start Bluetooth.
Ok, but you can write what message you see, exactly, please?
paulrockliffe said:
Exactly the same as the OP, when the phone starts it has a Bluetooth Error, then won't start Bluetooth.
Click to expand...
Click to collapse
Factory reset will fix it, and was for me the only way to get it to work again.
For fun.. Try your FM radio. It does also not work anymore!
Sorry, I can't help you, then.
Yes, unfortunately in some cases it's impossible to delete the files modified by the TomTom install. At first I have done a hard reset, too; then I prepared a modded TomTom CAB file without the BT drivers so that now everything works fine. If you should need it, I can upload it somewhere.
Hmmmmm! I'm not going to run a factory reset until I can put HSPL and a modified ROM, it's a pain not being able to use my bluetooth headset, but not worth the hassle of reinstalling everything. While I'm waiting I'm going to try out loads of other bits of software and workout how to use Sashmi etc to make it much easier to restore everything when I change ROMs.
Drakknar, if you could upload that file somewhere that would be useful, not just for me I'm sure. Maybe email it to the guy who's doing the hints and tips thread to attach it to that perhaps?
I'd be glad to share the link with everyone, but I think that posting a link to TomTom Cabinet in XDA-Dev would be against the rules. If it's allowed, I'll send the link to the author of the tips n tricks post, otherwise I can send a PM with the updated .cab to those who are interested
Drakknar said:
Yes, unfortunately in some cases it's impossible to delete the files modified by the TomTom install. At first I have done a hard reset, too; then I prepared a modded TomTom CAB file without the BT drivers so that now everything works fine. If you should need it, I can upload it somewhere.
Click to expand...
Click to collapse
maybe renaming the file will work?
Hi,
I know there should be a fix for TomTom and bluetouth stack that it crashes?
Have search but could not find it??
anyone?
in short....no. a hard reset is the only way. some folk speak of deleting certain files but these are inaccessable while wm is running. hard reset and take out the two bluetooth files from the tomtom cab using cab manager. then save the new cab and install.
Well, it's pretty simple and doesn't require a hard reset if you have the right file manager. I use gsfinder but there are many others too. With this app, you rename the files instead of trying to remove them. A quick reset fixes everything. Then just simply remove the renamed files.