Since I flashed the official new o2 Rom (1.57.207.1 (47324) GER) I've had the following Problem.
1. My Dial-up Connection works fine.
2. I configure my HD to use my home WLAN network. As it does not use DHCP I configured a static IP for my Wifi-connection. It connects fine and all applications use WLAN and work as they should.
3. Now I disconnect WLAN through connection center or another methode.
4. If I try to use my Dial-up connection now, it seems to connect fine to the network, but I cannot access any webpage through a browser or check my emails through outlook or anything. Opera just presents me an Error page.
5. If I disconnect my dial-up connection, delete the static IP settings from my WLAN-Adapter, set it to use DHCP for Wifi and reconnect dial-up everything works fine again.
I checked my dial-up settings, everything is set to automatic ip from server, but it still seems to be influenced by the Wifi settings.
If anyone has any solution to this problem, your help would be greatly appreciated, as it is pretty annoying to have to set the ip-settings everytime i want to use Wifi.
I tried a hard reset today, that didn't help either.
My phone has the following configuration:
ROM:1.57.207.1 (47324) GER
Radio: 1.12.25.16d3
Protokoll: 52.60.25.33h
Thank you very much.
Related
I have a MDA PRO
Rom Version: 1.12.42 wwe
Radio : 1.08.00
Protocol: 42.41.P8
Ext rom: 1.12.126 WWE
What I want to do: I am trying to connect to the internet using pocket internet explorer using my wifi network at home and not GPRS.
The problem: I go to 'Settings' >>"connections" tab >> 'Network Cards'>> "wirelss" tab
It displays my wifi connection and it says "available" so I {tap and hold} and select 'connect'. It then states that it is 'connecting' but it doesnt connect and reverts back to saying that my network is "available'.
What am I doing wrong? Do I have to set up something on my pc? Any additional settings on my Universal that i should initiate?
I tried searching the forum with no luck in finding someone with the same problem. Is there a thread with a guide that can help me out. Thanks for your time.
soft reset the phone
then no need to go into settings
on today screen (main screen) touch the "G" at the top
it will ask you if you want to activate wifi
select
it should connect automatically
I have exactly the same problem with my M5000.
Can anyone help?
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
Are your home wireless networks protected (eg WEP or WPA) ? If so - and I would hope so - then are you using the applicable WEP/WPA settings and key when trying to connect ?
Worth also trying to set the IP address manually on the PDA, see if this helps ?
For me, the first thing to do when experiencing wireless probs is to temporarily disable any encryption and see if it works then.....and then re-enable, carefully inputting key etc.
What happened there ! :roll:
On the Blue Angel, it was simple - you just set up a new connection, enter the PSK, connect and off you go!
On the Universal, however, I'm having no joy. I've set up the WEP and PSK stuff and the PDA can connect to the network, but when I try and open IE it opens up GPRS. Also, PC Anywhere only works via USB - again, it won't connect via WiFi. I'm sure it's just a case of adjusting some settings but I don't know which ones!
Wifi Connection Problems
Hi I'm experiencing exactly the same problems trying to connect.
I have a Wanadoo Livebox and my xda exec.
I've tried with my connection both unsecured and with 128bit wep encryption using the correct wep key....I still get connecting, followed by available, repeated continuously?
I have the xda set to connect to "the internet" and the authentication to "open". Key index is 1.
Can anyone help?
Thanks
Tim
Wifi Connection Problems
Hi, Just a bit more info...
Encryption is set to "wep"
Mac address is associated with the livebox.
802.1x is ticked to use IEEE 802.1x network access control.
EAP type is Smart cCard or Certificate
Thanks
Tim
Rom version 1.13.82 WWE
Rom date 11/30/05
Radio version 1.04.02
Protocol version 42.37.P8
ExtROM version 1.13.188 WWE
I just checked (with my Blue Angel) that the router and everything else is working and I'm happy to say it all is.
I set up the new connection on the BA from scratch - WPA-PSK enabled, nice long PSK, and I'm using TKIP. Network connects to: The Internet.
This allows me to remote up to the PC via PC Anywhere, and allows me to connect to the 'Net for free via the WiFi router.
When I duplicate the settings on the Universal, neither of the above works. What am I doing wrong?
Help!
You haven't got mac address filtering enabled on your router, and have forgotten to add your Universal's mac address to the list, have you?
Cheers,
Steve.
No, it's disabled.
hehe i had this problem tonight and was going to post up.
Has your router got MAC-control or anything on it? My SSID is not set to broadcast so I put the settings in manually.
I deleted the settings, and put them in manually again a few times, making sure I had the encryption stuff set correctly.
Eventually it connected and now seems to be working fine.
JAmes
Ad Hoc?
Ok, I've tried every possible combination possible and nothing is helping. So my next question to get around this problem>>>>>>>>>>>>>>>>>>>>>>>>>
Can I use my pc as a ad-hoc and us it as my gateway for my Universal?
I have a pc in the office down the hall with the actually wireless router, I have a pc in my room that is accessing the wireless router from the office.
Please let 'US' know if you have tried ad hoc or if you find the right settings to connect to the main wireless router.
Thank you
I am on my wifi network typing this, and my settings show 802.1x network access control not having a tick and network adapter connected to Work......on my iPaq hx4700 before, I used these same settings as they seemed to work well, although it ran WM2003SE not WM5.....
All this said, however, but I was lucky in that my MDA Pro connected to my wifi network at the first attempt - except not with as strong a signal as the iPaq had.....
Wifi Settings
Can anyone who has connected okay, let us have their full settings, so that we can try them?
Is your Router set 802.11g only?
You need to set the router to accept 802.11b and 802.11g.
If your router will only output at 54g, you could try the hack to switch the universal to 54g. I am yet to try this so I don't know if it works.
My MDA Pro connected straight out of the box once I set the ssid and encryption.
Hope this helps
Dave
I've been on the phone talking to 3rd line support at Orange.
Basically, the guy is totally flummoxed!
After trying to talk me through the setup from memory, it seems as though a whole menu of WiFi settings has disappeared from the phone - specifically, the ones that we need! This being the case, he's going to get hold of an M5000 tomorrow and will then bell me back so we can go through the whole process together, both of us using an M5000.
One thought that did occur to me was this: I've only just (like, 3 days ago!) upgraded to the M5000 and I've taken on some kind of free Internet access scheme with my tariff. Could it be that the settings for that (that are sent by Orange in a data SMS) have knackered the WiFi setup?
I'm considering a hard reset with a soft reset before the .CAB files install but will at least wait until tomorrow.
I'll keep you all posted....
ok heres the deal... i have a MDA flashed with the software from att for the 8125 everything works great except when i turn wifi on, i can connect to the network but cant ever get a page to work. does anyone have any suggestions????? please help
Is this happening on any network or your home network?
Check this... go to Settings - Connections - Network Cards. Make sure the WLAN Adapter is set to connect to the internet. Then tap the WLAN Adapter and make sure IP Address is set to Server Assigned then in Name Servers you don't have anything. If any of these is different, change it to the above.
Yeah. I have the same problem. I have wifi pci asus, the signal is good. I have Lan tru router and now bridged connection. I set the ip, mask and gateway which are in the status of the brudge. And the internet explorer and opera wont load pages.?!??! dns isnt set.
The network adapter is sdio wlan.., and the connection is my work network in connection > connections > advanced >select networks.
i use wm6, nbd 8.0
What could be the problem???
it is home network and all other wifi locations
i know there is a problem with secured networks, especially with wpa encryption. try to remove the encryption and see how it goes....
I have removed all encription. I tried preety much everithing and it doesnt work. All other free wifi networks work just fine, i can surf on internet.
what router do you have? i know that i could not connect to a 3com router with the wizard with any rom i tried.
try using a defined ip address and dns, meaning no dhcp. use a real dns addresses and not the default gateway...
Hello to everybody
i own a Trinity (i love it!) upgraded to wm6 (shadowmite rom) and radio 1.46.00.11.
i am desperately trying to connect via wifi to my home network to use my flat adsl, but i have no success.
Besides i also have a Blue Angel with WM2003 (i still love it..) and i dont have any problems at all with it to access my network/internet thru wifi!
I am using a wifi router/modem (zyxel prestige 660 hw) with Adsl2+ and italian provider liberomini 4mb
my PC is winXP MCE sp2 and its connected to the router with ethernet cable
I have set up both PDA's exactly the same way:
-wifi card :connects to 'my work'
-IP address: assigned by server
-authenticationpen
-data encryption : disabled
-connections/advanced/networks: both set to 'wy work'
-proxy settings: internet connection enabled / proxy server disabled
on the router i disabled all protections/firewall/encryption/passowrd/etc.
dhcp is enabled both on the router and the PC
both PDA's connect to the Zyxel router and show very with good signal strenght.
the router recognizes the signal of both pda's and displays correct mac-address and ip address of both
BUT,
THE BLUE ANGEL CAN BROWSE THE WEB USING TE WIFI/ADSL CONNECTION AND CAN ACCESS MY PC DIRECTORIES/RESOURCES, WHILST THE TRINITY DOES NOT!
it cannot locate webpages and does not connect to network.
i tried all possible combinations of wlan/wifi/connection settings, but no way!
Am i doing something wrong? is there any special setting to be done with wm6?
i dont believe the fault is in shadowmite's rom as even before flashing to this fantastic rom i had tried once with wm5 and had same problem (though i did not dig too much in it)
Can anybody help me?
Check if you are using a proxy in your gsm settings. If it is so, use someting like Advanced Settings or Trinityhacks or something ele to disable the proxy during wi-fi connections.
Ciao
wm6+wm2003+ router wifi
thks yr reply claros.
i checked my gsm settings (you mean my ISP connection settings?) and there is not mention of proxy server in there
i only found proxy server option in MY Work connection settings and it is disabled.
all settings are exactly same as on the blue angel which is working fine...
do you know if this is a common problem with wm6?
any suggestion how to proceed?
found solution!!!!!
eureka
i found the solution in this thread:
http://forum.xda-developers.com/showthread.php?t=315982
its very easy! just go to wlan power tab and move the horizontal slide fully to the left (best performance)
magically my triniry now is connecting to internet via wifi!
great!
ps: still cannot access myh pc directories but i guess i will solve by installing Resco explorer
thanks
Hi all!
I'm having a very strange issue with my Internet connection on the niki.
I have configured the default Internet connection (the one without VPN and Proxy config) to use the ISP parameters to connect to GPRS.
It connects but it's not working (I tried to navigate with IE but got error opening page).
So I created a new connection (in this case I could set up a proxy, but I left empty), with the same ISP config, selected it as the network to be use automatically to connect to internet, and it works very well.
Any idea about this strange behaviour?
Thanks!!!!
Alex
Solved!
I needed to configure a Work connecion (not used) with a Proxy (HTTP and SOCKS). In this way the Internet connection works fine.
Strange solution for a strange behaviour
I have done the same thing, but nothing solved :-( I am able to use IE and Opera via wifi but not via GPRS
Please assist.
1. My PC identifies the HD2 as Ad-Hoc and not as Infrastructure. Is it the case?
2. The WiFi router application registers only the WAP APN in the internet connections. I usually use the Internet APN, why is it not chosen?
3. On my PC, should I enter the 10 digits WEP key for all four WEP key slots, or just into the first slot?
4. When I try to connect, the HD2 prompts me to enter a Static IP address (no DHCP support). Where should I enter it? what mask and gateway addresses?
Thanks
anyone using that app?
I tried, but I can't. Unlike the original poster, it tries to connect to my MMS access point, of course there's no internet access there. I haven't been able to figure out how to make it work yet.
Mine works perfectly but only if the HD2 is right next to the computer. For some reason the range is ridiculously minimal.
sunking101 said:
For some reason the range is ridiculously minimal.
Click to expand...
Click to collapse
Battery drain, if the range was increased it would kill the battery.
I have the same problem as the first poster : I can't choose the correct 3G connection. Only one connection is displayed in HTC Wifi Router with one single radio button on its right and it's not the right internet connection for unlimited internet.
in order to choose the right APN, please choose SETTINGS>CONNECTIONS>CONNECTIONS>ADVANCED>SELECT NETWORKS and enter the right APN (Internet) in both tabs.
That will do the trick.
still, although HD2 is discoverable by my PC (in wifi Find networks), with a good reception level, my PC insists that it is an Ad-Hoc connection (no DHCP) and when I try to use Infrastucture (with the wep key), my PC cannot establish association (get IP address from the HD2) and it shows no signal level.
Please assist.
Zolom, thanks? I did that and it improved a bit the situation: now email clients work (pop) but web surfing still doesn't work. I didn't try yet other internet connections.
not working anymore
before i installed 1.48 everything worked perfect but after the upgrade it doesnt work anymore. now my computer can connect but the phone also connects to its own network.... very strange behavior.... tried to turn off wifi but that also turns off router. any suggestions anyone?
Voila I finally got rid of the "HTTP 403 Forbidden" error with a (partial?) solution.
I have installed user agent switcher (http://chrispederick.com/work/user-agent-switcher/installed/07/) for Mozilla on Windows Vista, and I entered the user agent of my ISP on my HTC HD2 . It works!
Questions:
- Is it possible to set the user agent on other browsers such as IE or Opera?
- I noticed the user agent is not necessary for pop3 email clients. Is user agent mandatory for other internet services, like Messenger, SIP, Skype, software updates, etc?