Hi All,
on the HTC-Website stands :
"Currently the MicroSD card supports 2.0 SDHC compatibility. These cards support up to 32gb storage."
http://www.htc.com/europe/faqs.aspx?p_id=291&cat=0&id=111012&f=t
But its not workin for me.
i have already installed all sdhc drivers from this and other websites. none of them worked for me.
so, does anyone have any successfull experience with 8GB+ SDHC cards with touch2?
My touch 2 is working fine with 8GB SDHC card.
I have not installed any drivers, I just put the card to phone and it works very well.
My Touch2 also had no problem with the 8G SDHC. No drivers needed. Only pluged the card in
Problem Solved!
the problem was the format type. i had formatted the card with NTFS. Then I tried exFat, it didnt work too, but FAT32 (Standard) solved the problem...
Hello guys. I had the same problem when trying to install 4GB microSD Kingston card. After phone restart the device did not discover the card. The problem was solved when I formatted the card with FAT32 (default file system) and default allocation size.
Mod. edit: Solved, therefore closed to prevent it from going off-topic. Title adapted. DK
Related
hi
i just bought a new 2GB Transcend MicroSD Card
with mini sd adapter.
but the wizard doesnt read the card
(fat32 formated)
if i try the card in a cardreader its working ,
my old 512mb mini sd card working is working in my wizard..
any solution?
XTRANGE...
Try to use a ROM that contains the app format storage and try to formatt... but i think it may recognize it first... nothing to lose if try... or reformatt it on a XP built in with card reader.
Panasonic makes a free sd formatting software that it claims to strictly adhere to the sd standard:
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html
You could give it a shot, don't see how it could hurt
Hello,
I bough a MicroSDHC 4 GB memory card for the prophet, but the only problem is It is not recognizing, some one told me that it is because of the file system of format, my 2 GB micro SD card have FAT format and 4 GB had FAT32 by default, so I reformated it in FAT and still I can't get it working, it's not regognizing.
Well, I saw a thread on web some where saying to download "driver" and install it on the non-supporting MicroSDHC device and it will start recognizing. Is it true?
Please help, if it is possible do tell me some decent way thanks.
FAISAL!!!!!!!
prophet doesnt support sdhc only recognizes sd.....their aint any driver support aswell
I have found this program:
http://www.foro-elrincondedey.com/p...as-tarjetas-sd-hc-funcionen-en-las-pda-2.html
I have instaled on my Qtec, but it doesn't work
Hi
I'm having such problem. Tried different types of SD cards, first one was Trancend 16GB class 10 (high speed). Second one Trancend 8GB class 6 (medium speed). Third one some noname 4GB... So, I've got the same reading problem with all of them; intermittent reading and even card recognizing issue which is rendering SD card reader useless on device. I should highlight the thing that all cards perfectly being read in all other devices when pulled out of Shift and inserted in any of another devices. Tried to do different things, reinstalled drivers few times and so far... Seems this is strange hardware issue (compatibility issue?) arises in windows 7 enviroment. It's so upsetting, I don't want to come back to slugish Vista but I really need SD card reader!
I did not see many posts about it, so is anyone else having similar problem? Can you please share ideas and solutions of the problem if you overcame it.
i was having the same problem but after i did a windows update it was working fine, i have a A-DATA SDHC 16GB card.
lovray21 said:
i was having the same problem but after i did a windows update it was working fine, i have a A-DATA SDHC 16GB card.
Click to expand...
Click to collapse
But my windows always up to date, including hardware and optional updates.
Maybe you remember what was that update which resolved card reader issue?
similar issue
i not that i can't acces on MicroSD card and Win7 ask to formatting it
i put in on XP Desktop
earase copy somes files
put it again in the shift
and i can access it
don't know what is the problem ?
Apply the BIOS update from the HTC website and all will be fixed!
Well !
first i was sceptique
On the HTC site
the Bios rev number
it is write v1.0.0.8
and my installed bios was v1.0.0.18
When i open the bios Flash utility
i see that the new version is 1.1.0.xx
i've install the non-UK file as indicated for non-uk shift
Installation was a success and very easy
but i still have the same problem with MicroSD card in internal SD card reader slot
I will check for EC driver i see somme where and tell you for result
still have SD PB
ok,
know i can acces to my microSD card in the SD card reader slot
with MicroSD to SD adapter
but when i use my other adapter that is
MicroSD to MiniSD to SD card adapter
the Shif ask me to format the MicroSD card
even if i use my USB Transcend SD card reader directly on USB
with the MicroSD to MiniSD to SD card adapter
In my XP PC no problem with this Dual Adapter !
Sniffff, i'm sad
SD card
Hello, so I use an SD card Transcend 32GB Class 10 and when inserted into the slot, but not log in to read it, but when you connect to the Internet and runs a minute and we can enjoy. When the shift to fall asleep again I have to pull the card and the data again and goes, but I'd wanted to tread do not normally have someone an idea or gimmick? Thank you for your reply, Mirek
someone solved?
I have the same problem
hi all
i inserted a 4gb sd card into the dock slot. it was taken straight out of a Canon Powershot S5IS...and it didn't work
havent tried other sd cards
havent checked what format the card is in
i did try rebooting the transformer
did try undocking and then redocking
so hows sd card compatibility? what are your experiences?
i think it only reads it in FAT format.
It reads FAT32 from the miniSD port.
The SD Card Reader on the right side will read FAT and FAT32 formats but it wont read NTFS (for now).
Try putting your SD Card into your pc (if you can), then right click on it and select properties to see how its been formatted.
Mark.
mskip said:
The SD Card Reader on the right side will read FAT and FAT32 formats but it wont read NTFS (for now).
Try putting your SD Card into your pc (if you can), then right click on it and select properties to see how its been formatted.
Mark.
Click to expand...
Click to collapse
The dock's SD card reader will and does read NTFS. It has since day one on stock or custom kernels............. Guess what it reads SDXC Sd cards too..........
http://forum.xda-developers.com/showthread.php?t=1063470
@OP: I know you know but just in case. If/when you format, you will lose everything on the card.
well thank you guys. seems im the only one with sd card issues lol
im just going to have to try changing formats and try formatting..
i just presumed that a sd card pulled out of an older digicam would be in fat32 haha
yellowchilli said:
well thank you guys. seems im the only one with sd card issues lol
im just going to have to try changing formats and try formatting..
i just presumed that a sd card pulled out of an older digicam would be in fat32 haha
Click to expand...
Click to collapse
I hope it works for you. I did test with 3 cards, two old Sandisk (1GB & 2GB) and a new Sandisk 64GB SDXC. They all worked with FAT32 and NTFS and on stock and custom kernels, but I've seen some people having some problems with certain cards and classes of cards. Please post your findings. Good Luck
I got the following cards:
Transcend Secure Digital 64GB SDXC SDXC, SD 3.0, Class 10
Lexar MicroSDHC Card 32GB w/USB reader Class 10, High speed SDHC card with USB reader
The dock reads the SD card formated to NTFS fine (have not tryed to format it to another filesystem)
But the MicroSD card in the tablett itselfe only reads FAT32, and not exFAT or NTFS.
But there are several of You that got tablets that read Your MicroCD cards that are formated to NTFS?
trancemode said:
i think it only reads it in FAT format.
Click to expand...
Click to collapse
Allow me:
http://www.tuxera.com/partners/operating-systems/ (NTFS, exFAT and HFS+)
and
http://dlcdnet.asus.com/pub/ASUS/EeePAD/TF101/TF101_Full_0418d.pdf (page 45 "Tuxera software provides support for NTFS format.")
Considering it actually allowed me to read an HFS+ usb stick....
So, unless there is some weird implementation, it should read those file systems also from the SD card reader.
ext3,ext4 is also supported.
I just tried NTFS on the MicroSD and it was a no go for me. I also tried ext3,ext4 (I'm somewhat new linux ) and that didn't work for me either. That could be me lol. So only FAT32 work for me on the MicroSD
On the SDcard. I could only get FAT32 and NTFS to work.
I tried this with stock .9 (3.0.1), 8.4.4.5 and 8.4.4.7 (3.1). Then with Prime 1.4 (3.1).
The cards I tried:
MicroSD: 3 - Sandisk 8GB, 16GB, and 32GB. I think the classes are 4, 4 and 2
SDcards: 3 - Sandisk 1GB, 2GB, and 64GB SDXC
I'm not saying the other filing systems don't work. I'm just posting what i tried.
cky2000 said:
I just tried NTFS on the MicroSD and it was a no go for me. I also tried ext3,ext4 (I'm somewhat new linux ) and that didn't work for me either. That could be me lol. So only FAT32 work for me on the MicroSD
On the SDcard. I could only get FAT32 and NTFS to work.
I tried this with stock .9 (3.0.1), 8.4.4.5 and 8.4.4.7 (3.1). Then with Prime 1.4 (3.1).
The cards I tried:
MicroSD: 3 - Sandisk 8GB, 16GB, and 32GB. I think the classes are 4, 4 and 2
SDcards: 3 - Sandisk 1GB, 2GB, and 64GB SDXC
I'm not saying the other filing systems don't work. I'm just posting what i tried.
Click to expand...
Click to collapse
Good to read that it's not only me that got problems with the MicroSD card not being willing to work witht he NFTS filesystem.
I recon this is something that Asus can fix with an firmwareupdate?
Anyone tried with USB sticks and external harddrives on NTFS file system?
I gues it should not be any dirrefence between A USB stick and an external HD
wow..
im going to give my problem sd card another go this weekend
well the first thing i plugged in was actually my external hdd. this was just a cheap enclosure with fake "VAIO" lettering on it. it relies on a erm...driver(?) called "USB to IDE Bridge" whenever it's plugged into Windows.
worked flawlessly
interesting...
my Sandisk 4gb SDHC simply refuses to work in NTFS
im guessing this is a problem between different card manufacturer and file system combo
but i can't prove it as i don't have too many sd cards lying around.
well at least i'm glad my sd card works now. i shoved it back into the camera formatted as FAT and the cam can use it just fine.
I'm pretty sure I did copy some files over to the MicroSD card when I hade formated it to NTFS before I tryed it on the TF
Not sure now tho so I will do a new test.
But if I am correct it got nothing to do with the card and the filesystem, rather with the TF and filesystems on different card-slots wich I find strange that they let it read one filesystem in one place and not in another place on the tablett.
Hi all,
I have a Galaxy S5 (SM-G900W8) Canadian model. I purchased a 128GB sd card and I'm running into some issues. My S5 can detect the card, and I can copy files to it. But it seems that one I hit roughly 8.08GB of used storage, anything more I add disappears after my phone reboots.
The card was formatted in FAT32 originally. I have tried exFAT but the phone is unable to read the card in this file format. I have also tried NTFS but same results as exFAT.
I have done some research and have seen others with issues regarding 64 and 128GB sd cards with Samsung Galaxy models, but no fix yet (or at least from what I've seen/read).
This card only seems to work in FAT32, but I am unable to use the full capacity of the 128GB sd card in FAT32.
I have a 32GB sd card that works just fine without issues. Not sure what file table the 32GB card is formatted in though as I did not know of this issue until recently when I discovered it so never bothered to check.
Is there a fix for this that I have not found yet? This is quite annoying.
Thanks
Probably a fake.
i dont have problem with Team MicroSD 64GB
you have to format it in your phone (ExFAT), use file explorer in your phone, do not format using PC
Talabis said:
Hi all,
I have a Galaxy S5 (SM-G900W8) Canadian model. I purchased a 128GB sd card and I'm running into some issues. My S5 can detect the card, and I can copy files to it. But it seems that one I hit roughly 8.08GB of used storage, anything more I add disappears after my phone reboots.
The card was formatted in FAT32 originally. I have tried exFAT but the phone is unable to read the card in this file format. I have also tried NTFS but same results as exFAT.
I have done some research and have seen others with issues regarding 64 and 128GB sd cards with Samsung Galaxy models, but no fix yet (or at least from what I've seen/read).
This card only seems to work in FAT32, but I am unable to use the full capacity of the 128GB sd card in FAT32.
I have a 32GB sd card that works just fine without issues. Not sure what file table the 32GB card is formatted in though as I did not know of this issue until recently when I discovered it so never bothered to check.
Is there a fix for this that I have not found yet? This is quite annoying.
Thanks
Click to expand...
Click to collapse
What sd card is this because it seems like it's a fake and may not really have all that storage. I've never had any problems with my 64 gb SanDisk micro sd card which I'm currently using.
try PC format
Hi there
You can try minitool partition wizard linkhttps://www.google.dz/url?sa=t&source=web&rct=j&url=http://www.partitionwizard.com/free-partition-manager.html&ved=0CBwQFjAAahUKEwib9oyKnvfIAhXLfxoKHVSLBKM&usg=AFQjCNFUxEI9jts4JkFFJGh5Osbjjty-uQ
After installation on PC
Connect your sd card to pc and choice fat32 format or other
Reply if this works
yanis488 said:
Hi there
You can try minitool partition wizard linkhttps://www.google.dz/url?sa=t&source=web&rct=j&url=http://www.partitionwizard.com/free-partition-manager.html&ved=0CBwQFjAAahUKEwib9oyKnvfIAhXLfxoKHVSLBKM&usg=AFQjCNFUxEI9jts4JkFFJGh5Osbjjty-uQ
After installation on PC
Connect your sd card to pc and choice fat32 format or other
Reply if this works
Click to expand...
Click to collapse
I downloaded the tool and just used the cleaner. I found problems and then I ran clean & fix and it seems to have solved the problem. Thank you very much.