Hey, I'm new to the forums...but I've been a long time Lurker
I recently attempted to replace the Digitizer on my German T-Mobile G1. Everything went fine, and was working well except for the external speaker, the phone wouldnt ring at all or make any noise. The earpiece worked fine, just no rings or music. There was also something wrong with the sliding motion, I must not have gotten everything lined up perfectly when i put it back together. So I take it all apart again to "fix", and when I go to do a test, it hangs on the main screen, says press menu to unlock, but nothing happens. Any ideas? Im sure the power button is working, I can turn the phone on no problem. Any help would be appreciated!
Related
Hi my mogul has been randomly dieing on me lately, i would turn it on and call someone talk and hang up, then 2 minutes later i would try to turn it back on through the power button because it hibernates or something and it just wont let me, i would have to take out the battery and put it back in, i cant even press the reset button or anything. i dont understand! thank you in advance for any replys!
oh yea, i know the phone is on because i see the lights flashing, but when i try to call it rings but thats it, it doesnt even show up as a missing call when i take out the battery and put it back in.
Try to reflash your rom. Or maybe a replacement is necessary
Idk if this is the same as what happened to you but something like that happened to my phone. The buttons would light up and the screen would just turn a light black but wouldn't show anything. If it is, I sent it to HTC and they fixed it for me for free; when I got it back it slid easier too, it had gotten a little harder to slide after I dropped it once.
Hello all,
I have a problem with my HD2's touchscreen. I've had the phone for awhile now and never had any problems. I've been using android from Sd for awhie and recently switched to NAND android.
I go to bed with a working phone and when I wake up, the touchscreen doesn't work. After trying to use it all day, it occasionly works. When I receive a call or text, the screen works just fine. I am abe to use it until the screen turns off then no more. This happens for each call or text. It also works just fine at first boot(until the screen is turned off.
Thinking that this was a software problem, I tried flashing different android builds, with the EXACT same results. I then wondered if it was a problem with MAGLDER, so I flashed back to a STOCK TMOUS rom, and stock SP, radio etc.
Even after going back to COMPLETELY stock, it now does the same thing in WINMO. Works just find at first boot until screen goes off, and works when I get calls and texts.
I'm now thinking that this is a hardware/digitizer problem, it just seems weird to me that it works 100% until the screen goes off and then not at all.
Anybody have any idea's or insights?
Thanks!
i've read a few similar threads (please search for them!) that indicate one possible cause...
your buttons strips at the bottom may be messing with the touch screen connections. i remember reading in one thread that the dude found a strong relationship between use of the on/off/endcall button and touchscreen failures.
you say it works...:
1. ...until the screen powers off
2. also works when you get an sms or call
in case (1), you have to press the endcall button to "wake" the device...so maybe the button puts just enough pressure to screw up the screen.
in case (2), the device wakes up automatically, so you never pressed the button that might cause the screen to screw up.
try to narrow it down like i've described. maybe your buttons are causing the problem. good luck!
Thanks for replying!
I did see the thread you were talking about though it did not seem to match my problems. However, today as I was working and pulling my phone out, It has started to look like that is the case. As of this afternoon, as long as I press any of the buttons other then the power/end call button to turn on the screen, the tuchscreen works just fine. When waking up the screen with the power/end call button, it does not work at all.
Yesterday and this morning, it didn't matter what button I pushed to wake up the screen, it was totally unresponsive.
So it looks like using the power/end cal button presses on my digitizer and causes problems.
And it's back to not working at all when I use any of the buttons, lol. Guess it's time to start looking into a new digitizer.
I've had a problem with my E900 since I got it with regards to the screen. I was hoping Mango might fix it but it doesn't seem to have.
Sometimes if I press the power button the screen backlight comes on (i.e. screen goes from off state to powered) but there is nothing on the screen. No amount of button pressing will cause the screen to show anything.
If this happens I have to turn the device off again (backlight then goes off) and try again. Sometimes it can take 2-3 times before it turns on successfully with the lock screen.
I also have this if an incoming call attempts to wake the phone and also alarms too.
Does anyone else have this issue?
I confirm this one popping sometimes. Not that often that it becomes annoying, but nevertheless.
Did you find a solution to this problem? I am experiencing it too and it is very annoying!
I've recently inherited one as well (E900 that is).
The one I have has been dropped, the backlight powers, but no drawing on the screen.
I've disassembled and re plugged everything (bugger stripping down!) but still no luck. I've done a VolUp+Down+Cam+power hard reset, and when I plug into PC Zune says setup needs completing (so it has reformatted) but still no luck.
I cant see anything fried, and no damaged ribbons as far as I can see, any ideas?
I sold the phone a while ago, and never solved the problem. I think it's a firmware issue.
PaulMdx said:
I've had a problem with my E900 since I got it with regards to the screen. I was hoping Mango might fix it but it doesn't seem to have.
Sometimes if I press the power button the screen backlight comes on (i.e. screen goes from off state to powered) but there is nothing on the screen. No amount of button pressing will cause the screen to show anything.
If this happens I have to turn the device off again (backlight then goes off) and try again. Sometimes it can take 2-3 times before it turns on successfully with the lock screen.
I also have this if an incoming call attempts to wake the phone and also alarms too.
Does anyone else have this issue?
Click to expand...
Click to collapse
hi.
What do you mean "somethimes if I press power button"?
Is it pressed with purpose to lock the phone, press it to turn off phone (background slider shows to power off - on Mango and beyond version) or press it accidentally?
Cheers.
So, I did a phone reset. Unfortunately the issue is still present!
Sometimes when I press the power button to unlock the phone the screen is lit, but stays blank i.e. no lockscreen wallpaper, no nothing. The same happens sometimes when I get a phone call - the phone rings and vibrates, the screen is lit but stays blank.
When this happens I have to press the power button to put the phone into sleep mode and press it again to wake it up.
What I found is, when the issue occurs the screen is actually responsive. For example I can slid up and unlock the phone then I hear the unlock "pop" sound. It's just that nothing is drawn on it!
I was wondering if anyone else experienced the same behavior and found a resolution. Also I am not sure if this is a software or a hardware problem. If I could confirm it was a hardware problem I would call LG and have the phone repaired or replaced.
i have exactly the same issue as you, it gets really annoying.
i heard from someone online that the only way to resolve it is to replace the motherboard
billybrown said:
i have exactly the same issue as you, it gets really annoying.
i heard from someone online that the only way to resolve it is to replace the motherboard
Click to expand...
Click to collapse
I am pretty certain this is a hardware issue. I am calling LG tomorrow and hopefully they'll take the phone for repair/replacement.
I sent my phone for repair. Today I got it back, and guess what?!
The issue is still present! It seems, they "couldn't reproduce" or something.
What should I do now?
EDIT: If anyone is interested, here is a video I just captured which clearly demonstrates the problem. http://youtu.be/38kF9RYs_bU
I'm sending the phone back for repair tomorrow with this video attached.
Hey, might not be an issue at all, but in the video, I saw that the two times you were able to get it to go blank you had your finger on or near the proximity sensor. I wonder if there is something that could be the trigger.
Just wondering if you can duplicated it or cause it only when you have the proximity sensor blocked, or if it truely is random.
You are right, it might has something to do with the proximity/light sensor.
On the other hand, this issue occurs even on incoming calls when the phone is placed on a table, screen up and nothing around the sensor.
Today, I visited my local carrier shop and left the phone for repair again. They told me, since this is a second claim they'll run it through the process faster, so I expect to get it back next week.
Will post an update.
UPDATE: My phone was replaced. Yesterday I got a brand new unit, yeah! It was stock wp 7.0. I plugged in my sim and used the phone the whole day, no sign of blank screen issues. Last nigh I installed all the updates (total 5 I think) up to OS 7.10.8107.79, FW 1.0.16.10. Guess what?! Same issue!
I am crushed
So I have a vzw fascinate that im using as basically a media device. Bought it used and it worked flawlessly. After I reset it, I had to bypass the activation. That worked like a charm, as well. I power cycled the phone once and upon booting it brought me to the screen where it asks "english or spanish." I selected english, thinking I had to re-enter the bypass code, but then it went straight to the main screen. It was then that I realized the home, menu and seach buttons stopped working. They all still light up, though only the back button responds wit haptic feedback. Im positive the buttons arent broken. This happened within hours of me purchasing the phone and before the power cycle, it worked fine. Any ideas?? This sux!
Phone was working with no issues until the other day. I was viewing a web page and noticed the text didn't look quite right, it seemed to be shimmering. Then a bit later on switching to the camera app the screen was just a lot of green flashing lines, pressing home button worked and then starting the camera again it would either be the same or would work properly. Then later that evening after using the phone fine opening the s cover the screen would not come on but the menu and back buttons would light up, pressing the power button a couple of times would make the screen appear. Then that stopped working as well, and no even then back and menu buttons don't light up. the phone still seems to work as plugging in the headphones and pressing the button on them starts my music playing, but I can't get the screen to turn on at all.
The phone has never been dropped has been very well looked after and is immaculate , there are no scratches on the screen and I can't see any cracks (from a pressure break) either.
Any ideas?
this might sound like im trolling, but did you try turning it off and on again?
seriously, your screen is probably broken. send it to sammys customer service or whereever you bought your phone and let them check and/or repair it