Hi everyone,
I was looking into turning my Pharos into an USB key. Because nothing worked, I end up trying to install "HTC Diamond_USB2PC_1.0.18143432.1" cab file found on this forum.
I probably shouldn't did this because now neither my PC or my Pharos seem to care when the USB cable is connected or not.
I uninstalled the above CAB, still no connection.
I tried to activate "advanced network functionalities" in Parameters->Connections->USB to PC but I get the following error (translated from french) "Failed to activate RNDIS"
Anyone has an idea about how to get back my USB connection (at least for activeSync) ?
Thanks
Hard Reset
Thanks, that worked. I happy I did a full backup one week ago
i have a similar problem,
for two day ago when i connect my pharos to my Win Xp or Vista Pcs, it charge the battery but windows say that the usb device is not reconized,
I have made a Hard reset but nothing change
Anyone can help because i'm working with this phone
Related
Hi everybody!
Since a few days I have my new Qtek S200 with Windows Mobile 5.0. The problem is that I can't connect it to my desk computer. I downloaded the ActiveSync 4.1 from the "Getting started" CD and tryed to connect my Qtek via USB cabel. The computer sees my device and says that is working correctly. The programs from CD are downloaded correctly (I preinstalled them a couple of times). When I start the connection it says that every port is working correctly (included USB) but the device was not detected!. I use Windows XP with 2 Pack, firewall Kerio Personal 4 and antivirus Avast 4.7 Home Edition.
I really don't know what should I do to connect correctly my device.
Please, help me giving some ideas, maybe you had the same problems and you could share with me your experiences!
My best,
Marcin
I found the problem!! It was a firewall that was blocking the connection. After disabling the firewall everythink is functioning without problems!
lucky you.
I disabled everything possible and still my Prophet does not want to connect through the USB cable after the first time.
What drives me crazy is that the first time it works ok and fast.
Hi!
I have tried now on two computers (one old windows 2000 platforn with activesync 4.2 and the other with Windows Vista Ultimate x64 with WMDC) and on the old platform it starts to connect but after a while an error. On the new I get no connection to WMDC. I always use my USB cable. The cable works, both loads and turn my loadinglight from yellow to green. My smartphone is a QTEK 9100 Windows mobile 5.
The error occured after I did scan on the phone for duplicated files and removed them. Afterwards it just wont sync. I have tried some tools, turning of firewall, reinstaling and all of the stuff recommended on the WMDC but now I am lost
What should I do?
wwwlewis
You may have removed a critical file that you needed for syncing when you removed the duplicate files. Does whatever program you used for that have a restore option? If not, you may need to backup the files you want to save and do a hard reset.
I have tried a hard reset now and it still dosent work. Now I am deeply lost
Try going to start-->settings-->connections tab-->usb to pc and either check or uncheck the enable advanced network functionality check box and see if that fixes it.
I have the same problem...
I have the same problem, i can't sync with my pc. it only shows a balloon that said "Unrecognized Device". I can not find the usb to pc box to be checked... pls help me. thank you
I have tried to find the pc to usb tab but I just can´t find it. I am running a swedish version of wm 5, but it still should be under connections. But it isn´t.
Hello to everybody!
After all I have to say that this is a fantastic forum for users of Qtek S200 (Prophet). I bought one last week and started to see what I could do. Therefor... I'm a newbie
This is my first thread, hope that some one can help.
After trying to understand the world of Prophet, I first changed the ROM to an official Qtek ROM.
Now I what to sincronize with my PC to transfer photos and put some software and apps in the card. Like I read here, I downloaded the activesync from microsoft site, instaled it and plugged the cable to my pda. Nothing happened. Than I went to activesync connections enabled USB connection and tapped in connect. After a search, the pda was simply not found. Even after turning down de AntiVirus and Firewall, nothing happened.
What happened? I have to do something in the PDA? Couldn't find that info in here.
Thank's in advance for the help
Heurd
Does the LED in the speaker at the top change to orange?
Does the computer react at all? (any sounds etc.)
If not, try putting the device into bootloader: Press and hold the COMM button and then soft reset, and then plug it into your computer and see if anything at all happens.
If nothing happens, the USB cable is damaged. If the computer responds when the device is in bootloader but not when it is in, the ROM may not have the required software installed in it.
Hi,
Yes, the Led turns orange. I can charge the battery with that cable. But i also read that it's possible in some cases to charge but the part to syncronize can be damaged!!!
But what really intregues me is that I used that cable to put the ROM that I have. Supposedly it's a Qtek official ROM, i don't know if you can conclude something with this:
IPL 2.10.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.29
In PDA appears the active sync icon and tapping it only appears a window that says to install AS in PC and connect. So I suppose that it has something.
thanks to l3v5y for the sugestion... I will try and than post here what happened.
does anyone has anymore suggestions... I will try everything to put this at work.
In PDA appears the active sync icon and tapping it only appears a window that says to install AS in PC and connect. So I suppose that it has something.
Click to expand...
Click to collapse
This seems to say you haven't successfully installed Active Sync. Try restarting your computer and seeing if it works then.
l3v5y said:
This seems to say you haven't successfully installed Active Sync. Try restarting your computer and seeing if it works then.
Click to expand...
Click to collapse
That is surelly not the problem because I installed AS 4.5, restarted the computer more than once, removed that and reinstalled and nothing... I even had put de AS 4.2 to try and see if it worked - nothing.
Now I'm not in my computer... I will try what you suggested when I go home.
I think it may be something to do with the USB cable...
Had that problem a while ago, my solution was to reinstall windows xp and it worked. so backup your pc, format your hard drive and then install the os (windows xp/vista). i guess it was usb-driver related.
REALLY
Unbelieveble...
well, It's easier to try in another pc before formatting mine. I'm not in the mood (too much time to put like I like)
That way I will check and see if my cable and ROM are allright.
Thanks for the tip croco_64
Hope to tomorrow come in here and wright that it's everything ok
Hi there!
Well... I've tried what you proposed. It is probably a problem of the cable. I tried with a cable of a digital camera and finally the computer detected the phone (with mine it only went orange light in the top, but never recognized - despite I changed the ROM with it ). However it gives an error - the instalation is not complete!!! I went to device manager in the PC and there was a yellow (!) in the windows mobile device.
Is it of the cable!? Do the cable have to have specific properties to sync the pda and the pc? The camera cable isn't enough?
yes... I had put activesync 4.5 in the PC!!!
thanks again for the help
My iPAQ 612 is not recognized on computer
Anyone can help please.... !!
I am using iPAQ612 with somehow I can connect iPAQ612 with any computer with the ActiveSync. It was working smoothly and I haven't connect with ActiveSync for longtime. Couple days ago I was trying to upgrade new ROM and connect with the ActiveSync I found this problem.
I have tried many ways of solving this issue but still not make it solved.
These are what I have tried.
1. I have tried to reinstall ActiveSync and install New ActiveSync4.5
2. I have tried to install new windowsxp on new harddisk and install activeSync4.5
3. I have checked on Setting System "USB to PC" both checked and unchecked
4 I have tried to connect with VISTA and install Windows Mobile Device Center
5. I have tried to unchecked Power / USB Charging
All above I tried T_T still unsolved my problem
Any suggestion can help I'm very welcome.... and thanks in advance.
PS. Can anyone Dump original ROM WM6.0 for me I'm thinking to take iPAQ612 to HP Center but I have to change my rom to original version
otherwise the warranty will cancel.
apichaix said:
My iPAQ 612 is not recognized on computer
Anyone can help please.... !!
I am using iPAQ612 with somehow I can connect iPAQ612 with any computer with the ActiveSync. It was working smoothly and I haven't connect with ActiveSync for longtime. Couple days ago I was trying to upgrade new ROM and connect with the ActiveSync I found this problem.
I have tried many ways of solving this issue but still not make it solved.
These are what I have tried.
1. I have tried to reinstall ActiveSync and install New ActiveSync4.5
2. I have tried to install new windowsxp on new harddisk and install activeSync4.5
3. I have checked on Setting System "USB to PC" both checked and unchecked
4 I have tried to connect with VISTA and install Windows Mobile Device Center
5. I have tried to unchecked Power / USB Charging
All above I tried T_T still unsolved my problem
Any suggestion can help I'm very welcome.... and thanks in advance.
PS. Can anyone Dump original ROM WM6.0 for me I'm thinking to take iPAQ612 to HP Center but I have to change my rom to original version
otherwise the warranty will cancel.
Click to expand...
Click to collapse
Hi,
What ROM are you using now ? Normally, if you install AS 4.5, it will wait for a PPC to connect and then make a new profile etc. Unless something went wrong with your ROM-update.
For the latest ROM from HP, look here
Dirk
try using another usb-cable
Hi,
I'm new hereand this is my first post.
I bought me a HTC Touch HD and it had it's original ROM so I wanted to upgrade it. I read the TUT from this site but got an error message when I executed the HSPLWrapper_Blackstone_156Olinex.exe. Then I tried tu update the official Rom from the HTC site (1.56.404.1). This was OK. Then I tried again the Olinex and it seemed ok but it took just a few seconds to complete the update! I did it again and it was exactly the same: Updated within seconds. The only differece is when it boots, the D shows 1.56.00.00 ...
But after this action my laptop which I used to do all these, lost it's internet connection!!! I can receive mails but can't send them and can't connect to any website. I normally use a wifi connection and when I tried the LAN connection it is the same: No internet connection!?!
My modem is working because I can connect to the internet via wifi with my touch HD and my desktop.
I'm sure I didn't change any settings on my laptop. However I installed activesync and Windows Zune. But as soon as I saw that zune was downloading a bunch of **** I decided to uninstall this. The same thing I did with activesync4.5.
Then I started to search the internet but couldn't find anything like this. Then I started rereading all kind of manuals from this forum and then I realised I didn't install de .net software but in Softwar I can see there is .net framework3.5 SPI on my XP SP3 laptop. I'm not shure if that is what is wrong?
I also have to mention that I don't have the official CD's for the Touch HD. So I don't know if you need to install any usb drivers for the device in XP. I got sometimes error messages when connecting the HD with usb to the laptop like unknown usb device or this device can use a faster usb connection (something like that).
I'm so frustrated now! I'm afraid I have to reinstall XP because I can't find out why I lost my internet connection on my laptop?
Is there anybody out there? who can help me with this wierd problem?
Regards,
Carlo