Database Users

p3600 A2dp, crappy sound

The quality of music with A2DP is really bad, have much better sound with my qtek s110 with a2dp hack. I have been using the same sony ericsson ds970. Is there anything that can be done about it?

perhaps you can follow the instruction to turn on the stereo, then the sound will be better.

This is my experience to. I had a SE m600i before and the sound was way much better on that device.

The sound clearly suckes with the headset that is packet with the P3600.
The sound on the S100 was far more better.
Lets just hope the ATi chip get's activated on the rom-update, so that the Graphics and Sound get better.

guys, could you please be more specific? what exactly made you unhappy about the sound produced by HTC Trinity?
please define the problem. is it too soft, too loud, lacking bass or higher frequencies, choppy, etc, etc????
P.S. forget about stock standard wired headset supplied with your Trinity. it's bad.

Azamat said:
The sound clearly suckes with the headset that is packet with the P3600.
The sound on the S100 was far more better.
Lets just hope the ATi chip get's activated on the rom-update, so that the Graphics and Sound get better.
Click to expand...
Click to collapse
ATI chip?

Guys try using the Hermes Registry Tweaker
I used the hermes registry tweaker to take BT Stereo sound from "Okay" to "Excellent" the tool has five levels of quality as well a tweak to enable true stereo rather than joint stereo.
It worked for me! You can unlock and mount EXTrom too.
http://www.theunwired.net/?itemid=3311

It has a desturbing sound on the higher tones and the bas is muffled. I tried the fit4 program and changed to the best quality, it sounded a little bit better but it was hard to hear, beacuse now the music skips even more thnat earlier. You know you ger music for a while, it cuts of for a second and then comes back. Now it does this every 5 seconds.

CutePinkSox said:
I used the hermes registry tweaker to take BT Stereo sound from "Okay" to "Excellent" the tool has five levels of quality as well a tweak to enable true stereo rather than joint stereo.
It worked for me! You can unlock and mount EXTrom too.
http://www.theunwired.net/?itemid=3311
Click to expand...
Click to collapse
just tested it here. seems to work. The setting was on LOW on my trinity.
I also tried to turn on the GPS settings, which turned on a nice little menu for configuration of the GPS. Looks promising if this is what we get
does not look like the settings gets any gps functionality to be activated besides the settings.

Excellent
Made a big diference on mine too! Nice to know it worked for you.
Try this to disable joint stereo so you get REAL stereo sound, then you will see the difference.

..now the music skips even more thnat earlier. You know you ger music for a while, it cuts of for a second and then comes back. Now it does this every 5 seconds.
Click to expand...
Click to collapse
please see this thread for details. There are good chances for this little gem to work on Trinity as well.
http://forum.xda-developers.com/showthread.php?t=284974

you guys might also want to check out the effort made to port the WIDCOMM stack onto the hermes (to replace the microsoft BT stack). the widcomm stack is superioir and the testers so far have indicated that sound on a2dp is great. the hermes and trinity are basically the same... so it might work.
the development thread is here http://forum.xda-developers.com/showthread.php?t=285419&highlight=widcomm+development
also consider a donation if you like here:
http://forum.xda-developers.com/showthread.php?t=284329&highlight=100+users

Last time I tried the Widcomm stack the stack started well, but I couldn't see any bluetooth device. The blue-led did not flash either.

Can't find any bluetooth device.
adewidt said:
Last time I tried the Widcomm stack the stack started well, but I couldn't see any bluetooth device. The blue-led did not flash either.
Click to expand...
Click to collapse
Same here ....

3D surround configuration
On page 78 of Trinity's manual there is an instruction to set the 3D surround configuration at the headset by going to
Start> Settings > Personal > 3D Surround Sound
and enabling surround sound + setting levels.
I simply can't find the "3D surround sound" selection at >Personal tab...
Can someone help me to configure (eventually by using some registry configuration) how to make this command to appear?
Seems to me this could help to improve stereo quality at P3600...

low volume on p3600i
SecureGSM said:
guys, could you please be more specific? what exactly made you unhappy about the sound produced by HTC Trinity?
please define the problem. is it too soft, too loud, lacking bass or higher frequencies, choppy, etc, etc????
P.S. forget about stock standard wired headset supplied with your Trinity. it's bad.
Click to expand...
Click to collapse
The problem with my new p3600i is that the volume is much too low. With volume control at max setting, I can just hear music in a quiet environment. e.g. an empty room. When there is any background noise, e.g walking along the street, on a train etc, it is almost inaudible. I am mainly listening to classical music, so the dynamic variation is greater than for rock etc., but nevertheless very disappointing.
I am using the supplied headset, but the sound is not loud enough to know what the quality is like.
Are there any setting I haven't found yet? All the talk about changing the ROM sounds like something which might void the warranty
thanks
John

I have used HTC_UseJointStereff.cab and HTweakC, it seems that the sound changes a little, i don't konw which helps, but they help....
Thank you all.

HTC audio gain - Increase in-call mic volume

I have been looking into increasing the mic volume on my X1 when using a wired headset, as people have commented that my voice is too low when on a call. There were no complaints relating to the volume of my voice when I used my previous handset, K850i, and the Sony Ericsson standard wired headset, HPM-62, so I started researching the issue. I came across a lot of other users who have used Windows Mobile devices, specifically HTC devices, and who also experienced the same issue, however, they resolved it by using this registry tweak.
I checked the registry on my X1, but there are no audio gain options present and I was unable to create them successfully. I was wondering, has anybody managed to increase the mic volume on calls, in general or when using a headset, either via a registry tweak or by software?

I actually never had this problem. I check the registry and couldn't find any in-call related audio settings. Can't help you there I'm afraid.

Wonder if it will work if we just import these settings from another phone with these registry values present.
Can somebody post them?

I don't think it uses that system any more, instead it uses the .cpl files in windows to control audio levels.
Have you tried a different wired headset? it might just be a quality control issue with your one?
the only person who ever complains that they can't hear me on mine is my other half, but as I've pointed out, it's just another great excuse to moan at me, (she hears that bit fine)...
You could try one of the mini-USB wired headsets around (as long as it's not a silly HTC bizarreusbplugfittingthing),
something like this; http://gpsforless.co.uk/product_details.php?id=15774 (but not that one as the cable broke really quickly on the one I had).
I had one for my athena and it was pretty loud.
Not tried one on the X1 as I'm happy with the levels out of the standard headset.
[edit]
just had a thought, have you tried microphone automatic gain control? (it's in settings)
there are registry entries for that.
HKCU/software/htc/softagcdata (this on ITJES rom anyway, which uses quite a lot of Htc stuff).

Problem with volume on stereo bluetooth-headset

I have the sound coming correctly via my stereo bluetooth-headset, but I cannot change the volume of it.
The volume that I change on the device has no influence on the volume of the headset...
Any idea?

I have the sa meissue with my Sony bluetooth headset. I can only control the volume via the headset but not from the build in volume control of the HD2. I also noticed that the quality of the sound is worse compared to my Kaiser or the Hero. I tried to change the Blettoh a2dp settings in the registry to High quality sound but that doesnt have an impact.
Does HTC use the Microsoft bluetooth stack or a third party tool?

The problem is, that I cannot control the volume on the headset itself.
So it has to be controlled on the device.
That worked with the same headset nice on the Touch HD.
With this new Windcomm Bluetooth stack, used in the HD2, this seens not to be possible.

Any news about this problem?
I really wish, we could get the old microsoft-stack back, since there a re so many problems with the widcomm-stack...

Wireless bluetooth stereo volume control does not work with HD2

Hello,
I have a wireless bluetooth stereo and when I connect it with HTC HD2 it always plays music to the loudest level. The volume control level of the phone (volume buttons on the left side) works fine (volume bar goes up and down) but the volume on the headset does not change.
I tried different music players (such as nitrogen which has volume control but still volume level didn't work).
However, when I am talking on the phone using the wireless bluetooth the volume control works fine. The volume controls works fine also when I have a wired headset connected.
This is my headset: http://www.sonyericsson.com/cws/products/accessories/overview/hbh-is800
Anyone else had the same issue?
P.S. My wireless bluetooth headset is working fine as I have tested with other phones such as Toshiba TG1 (my previous phone - HTC is so much better), Sony Ericsson P1i etc.
Thank you

Use the volume control of the headset, then it'll work fine. The bt audio isn't routed through the HD2 volume control.

htc12345 said:
Use the volume control of the headset, then it'll work fine. The bt audio isn't routed through the HD2 volume control.
Click to expand...
Click to collapse
There is no volume control at the headset.
I have the same issue here and my headset worked fine with my Xperia X1.
This headset is A2DP and should work with this phone
Maybe it is something with the Widcom BT-stack vs. MS
..JL

As jorglund said, there is no volume control on this handset
Too bad, I can't use it with this phone.
You would expect a phone like HD2 to support it.

for media player: no digital volume control on this headset like holding the play button until volume changes up-down?
for phone calls: did you try volume control on phone while in a call? does that work? (that should work)

for media player: I tried to hold down the play button until but volume did not changed down/up (it works with other phones).
for phone calls: Yes that works fine, the volume controls for phone calls is ok.

The manual says some phones don't support volumecontrol. On my Sony headset holding the play-button controls it's own volume for audio. However I cannot change callvolume with that headset.
Must be one or the other.

You are right.
I also read on my headset manual the following:
"The music volume cannot be changed"
"Some mobiles do not support remote volume control. Please check the support website for downloading the additional software"

Hello! don´t waste your time friend, I have my hd2 since Dec. 1st and the same headset,HBH-IS800 from my previous phone, and tell you that unfortunately are not compatible with HD2.

thank you mate for letting me know

this the headset that I use now:
http://www.amazon.com/Sony-MDREX38iP-BLK-Earbud-Control/dp/B002M78JA2
is a very good one,no BT

I've got the same problem with my Jabra JX20 headset.
I use it for phone conversations, but not so long ago i remembered it supports A2DP. So i tried to listen some music through it, but the minimum volume is just killing my ears.
You can however adjust it somewhat through direct volume controls on the BT headset itself, but it is still way too loud if you turn it down to minimum.
I don't know who to blame here, HTC or Jabra, but i must say i'm really dissapointed with both of them since they so proudly state their A2DP capable phone/headset, but in the end you have to find out on your own if this A2DP thing really works (f***g lottery).
Does anyone know any software solution for this problem?

Same problem with my Jabra BT3030
Hello Guys
I use to have a HTC Touch which was a great little unit. I updated to the HD2 and tried to use my Jabra BT3030 (the one that looks like a set of army dog tags) and I have the same problem as you all. The music volume cannot be changed via the HD2. And the volume controls on the BT 3030 only reduce the volume a little regardless of what the volume is set up on the HD2. The HT3030 workded great with my old HTC Touch so what is the problem HTC? What is the problem and what is your! solution.
Are there any other bluetooth units out there that alow you plug in your own earbuds or canal phones (I use Etymotic er6i's and Shure SE240's)
Cheers guys
Kym
Sydney - AUSTRALIA

Hi guys,
Thought I share my experience with you.
I have the HD2 and the same BT SE headset, and the exact same problem. I have contacted HTC Customer Service and their reply is that the design of HD2 does not support remote volume control. FYI, I had the HTC Touch HD before and the same SE headset works great when listening to music; so much so my headset actually broke from natural wear and tear, and I have to have it repair/replaced. Unfortunately now it does not work with HD2.
I do hope HTC recognize the problem and that they will provide a fix soon. However, judging from the respone of the CS, I doubt that they are going to bother fixing it when they use the "design issue" as a shield. It is a little disappointing as HD2 is one of the greatest product of HTC yet.
Cheers!

BlueInput for Broadcom is closing in
We're happy to announce that Teksoft is just a few weeks away from the release of Blueinput for devices that use the Broadcom Bluetooth stack, including the HTC HD2, HTC Touch Pro 2, Asus, and others.
BlueInput is an advanced HID driver that totally transforms your Pocket PC or Smartphone into the perfect Mobile office solution by offering easy Bluetooth connectivity to Bluetooth Mouses or Keyboards.
http://www.teksoftco.com/index.php?section=press&cat=2010#100203

dhamma said:
BlueInput for Broadcom is closing in
We're happy to announce that Teksoft is just a few weeks away from the release of Blueinput for devices that use the Broadcom Bluetooth stack, including the HTC HD2, HTC Touch Pro 2, Asus, and others.
BlueInput is an advanced HID driver that totally transforms your Pocket PC or Smartphone into the perfect Mobile office solution by offering easy Bluetooth connectivity to Bluetooth Mouses or Keyboards.
Click to expand...
Click to collapse
What does this have to do with anything? Looking at the website, this driver appears to be for bluetooth keyboards and mice connections? Does this driver allow A2DP volume control? Anyone?
Am quite annoyed with this issue I have to say, I've upgraded from the Storm which was quite frankly the worst phone I've ever owned, but it connected and controlled my HBH-IS800 earphones perfectly. Would have expected much better from HTC. Have trawled the internet looking for a 3rd party A2DP volume control app, but no luck. I've noticed that one has been developed for Android though, so looks like this was an issue for that OS too but someone has stepped up to offer a solution. Any developers out there who could give it a shot for Winmo....really, anyone....?

Just FWIW, you can use SRS WOW HD to reduce the volume of A2DP audio on the HD2. Or at least, you can on my HD2!
1) Install SRS WOW HD, which I can't link you to directly because i'm still a "new user" apparently, but try tinyurl dot com slash ybxf4tt
2) Start => Settings => Menu => All Settings => System => WOW HD Settings
3) On the "WOW HD Settings" page, leave "Enable SRS" as disabled (no, really)
4) On the TruBass/Gain page, you will find "TruBass Level", "TruBass Equalizer" and "Output Gain" are disabled (because "Enable SRS" is disabled). However, "Input Gain" is enabled, and lowering it from its initial value of -1db will reduce the output level of sound played through A2DP.
This setting will survive the shutting-down of SRS WOW HD; it does not survive a soft reset. State the obvious, if it's still too loud at -12db you can turn on the full "Enable SRS" settings and play with the other sliders to get an acceptable level.
Working well with my HD2, Nitrogen audio player and Sony HBH-DS200.

I have HBH-IS800 and use Nitrogen. I know the volume control doesn't affect the volume of the headset, but if you go into the equalizer then the leftmost slider is for pre-gain. This adjusts volume and is how I use the headset with the device.
HTC have told me that they're aware of the issue and are working to fix it. That was over a month ago.

Altec lansing backbeat 906
Same story here. I bought a bt headset and volume control don't function properly. Pitty

Sorry to shout, but I guess it's the only way to get heard.
Use Nitrogen as your music player and use the pre-gain channel in the equalizer to change volume.

Microphone volume when using wired headset

We have been using the Sennheiser CC550 professional wired headsets for years with a range of phones, Nokia, SE, Iphone (you can buy different endplugs). But to my astonishment the sound from the microphone is crap with the S2. After extensive research we haven found out that this is a general problem with Samsung, Google/Samsung telephones and S2, no professional headset (call center type) that we or our supplier have tried (we tried a lot). We also checked the wiering scheme to exclude any "grounding" problem, and can't find a problem there either.
Anyone got a wired call center type headset to work?
I have done some reserach and it seems that the condensator microphones used in electronic headsets have to voltage standards (someting like 1,5 V and 2,3 V) - could it be that Samsung uses the lower voltage or someting.
To add on the burden the bluetooth implementation in S2 is crap (tried Plantronic Discovery - doesn't work at all and SE WM600 works but not very well and doesn't have a micrphone "boom".
Any suggestions?

I am using Plantronics Discovery everyday from the very first day I bought
my SGS2 without any problems whatsoever. I have still stock 2.3.3 fw on my
phone, plus the matching cf-root. Are you on stock fw as well, or have you
flashed a custom ROM - maybe this is to blame?
As for the wired headset issue in general, it is a fact the the Android
implementation (in general - regardless of manufacturer) is, to say the least,
mediocre. No wired headset with in-line remote works (i.e. volume control,
skip/forward, etc) without custom apps and ridiculous button press combinations.

Thanks four your reply. I have uppgraded a few orginal ROMs, currently on Cognition 1.6. The problem with Samsungs bluetooth stack on S2 seems to be widespread, we bouth the WM 600 as it seemed to have the least issues and it's headset sond is ok if not good (don't mix the headset profile up with the A2DP bluethooth "music" profile which is not engaged in hedset mode) . The CM7 ROM seems to have sorted out the bluetooth stack problem, but have other issues. Our wired headset problem is not related to in line controll buttons (or anything with media playback for that matter). This is another aspect of the headset functionality that we don't use e.g. the CC550 don't even have any buttons - as it is a "call center" headset. Our focus is pure "talk" sound quality - and particular microphone (outgoing) sound quality as the CC550 (and other wired headsets) relays the speaker at the other end normally (i.e. good). As a sidenote maybee Android 4 supports USB headsets, it seems possible to connect a DACT anyways, this would solve our issue /Regards voz

Don't know if you have the same problem as I do; here is what happens with my microphone issues. Maybe related?
When using any wired headset, everybody will complain that I am "too loud". Not just painful volume, but distorted. At first I thought it had to do with the frequency of my voice or something, but apparently people can hear my car radio at a volume so low I have forgotten that it is on.
Another thing I have noticed is when I am using headphones with a microphone (not necessarily talking on the phone) I hear buzzing noises, usually when interacting with the phone. For some reason when I use Twitter it's really bad. Once, while I was on the phone somebody said they could hear it too.
My only solution to the mic-gain issue was to enter service menu and lower mic gain levels, of course when I reboot settings are lost and to be honest when I forget to re-enter them, my friends and coworkers take the opportunity to ream me out.
*#197328640#
[5] audio
[1] nb (voice call)
[2] headset
[1] volume
[4]dst speech tx volume: i put 60 here, default is 88, but that is too loud. tx = transmit, many instructions say to adjust rx value, but that is to receive, so that would be your earbuds, not mic.
If anybody knows another fix, or way to make an adjustment permanent I would love to know.

Interesting, I cranked it up to 100, see how it goes. There are some other interesting settings, eg. Tx Gain - do you know what that is for?
A hassel to enter them again after reboot thoug!

Vozie_Stockholm said:
Interesting, I cranked it up to 100, see how it goes. There are some other interesting settings, eg. Tx Gain - do you know what that is for?
A hassel to enter them again after reboot thoug!
Click to expand...
Click to collapse
My value for that and the 2 things before it are "0x6132"
I know this service menu isn't really meant for end-users, but it would be great if there was a little more documentation we could find regarding these values and what it all means.

[4]dst speech tx volume: tried 100 - increased the volume, tried 60 decreased the voluem - so it does work. However, the problem with the Sennheiser cc550 is that the Galaxy S2 changes the frequency response or something - so the volume is actually ok with the default setting at 88, but the sound comes out "high pitched" at the other end. To me it seems like the microphone in the headset is not feed properly from the handset. For an article on the subject see http://www.hobby-hour.com/electronics/computer_microphone.php