Hi, someone gave me a Dopod S1 on T-Mobile, it is from China Mobile and I think it is an ELF 0300 and is on Windows Mobile 6.0.... I think
It is in Chinese and I want to change it to English.
Now I have no clue where to even begin, but I was told to check this forum out. so can someone please help me before I smash this thing up lol
Thanks
Hi Sion13
don't smash it... yet, start by giving more details with this tool http://forum.xda-developers.com/showthread.php?t=418892
Hey thanks for the prompt response. I had a wee hunt about and managed to find some info about it. I have now managed to get it on english with onyx 6.5 which is looking pretty damn class!
Thanks dsixda for this!!!
OK, new problem, once I installed the onyx 6.5, it worked for about an hour although it kept restarting itself, then it went off and now it wont go on. I can turn it on and it will go to the manufacturers screen (china mobile) then when it should start loading the OS it just cuts off. I can get it to go to the RGB screen by pressing the power and camera button and if I press the call and end call buttons i can hard reboot. have tried reinstalling the onyx but it installs and just cuts off. any ideas???
on the RGB screen it says
IPL 2.24.0002
SPL 1.11.0000 if that helps any, like I said im a windows mobile virgin lol....
This says you've bricked your device, maybe there's a chance to recover and this time you will have to stop a moment and read what others experienced and what solution they found. Good luck
Bricked it????
Sounds painfully interesting, I'm looking through the wiki now but if you have any pointers on where to look, it would be very appreciated.
Start with this http://forum.xda-developers.com/showthread.php?t=406721
ITS ALIVE ITS ALIVE!!!!!! THANKSSSSSSS!
Touch version : Elfin
Device ID : ELF030050
CID : T-MOB005
IPL : 2.11.1002
SPL : 2.11.1000
ROM Version : Unknown
ExtROM Version : None
Operator Version: None
AKU Version : 0.4.2
Page Pool (MB) : 2
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0301
Part Number : 99HEL006-00
SIM Unlock Code : 77183872
MCC+MNC :
00101F 23430F
IMEI (private) : 356789010859104
Serial Number (private): HT746GH00383
MAC Address (private) : 0018413B896D
That is Everything I got off of the Deviced Info thing, great tool BTW. Now can I put a good version of that onyx on this as it looked the part for the hour I got to play with it lol.
Also,see this SIM Unlock Code, can I unlock my phone for any network with that?
Thanks again for all your help so far.
Sion13 said:
ITS ALIVE ITS ALIVE!!!!!! THANKSSSSSSS!
Touch version : Elfin
Device ID : ELF030050
CID : T-MOB005
IPL : 2.11.1002
SPL : 2.11.1000
ROM Version : Unknown
ExtROM Version : None
Operator Version: None
AKU Version : 0.4.2
Page Pool (MB) : 2
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0301
Part Number : 99HEL006-00
SIM Unlock Code : 77183872
MCC+MNC :
00101F 23430F
IMEI (private) : 356789010859104
Serial Number (private): HT746GH00383
MAC Address (private) : 0018413B896D
That is Everything I got off of the Deviced Info thing, great tool BTW. Now can I put a good version of that onyx on this as it looked the part for the hour I got to play with it lol.
Also,see this SIM Unlock Code, can I unlock my phone for any network with that?
Thanks again for all your help so far.
Click to expand...
Click to collapse
i wud suggest you to upgrade your ipl and spl to 3.10.
Don't make the mistake to jump again to rom flashing. As srgudhka tells you, you should upgrade IPL and SPL this is called CID unlock so you can install a new rom, read this http://forum.xda-developers.com/showthread.php?t=445666
( not SIM unlock that refers to opening device to other networks !!!see http://forum.xda-developers.com/forumdisplay.php?f=374&order=desc&page=2 )
Hi guys,
just wondering, I changed the CID so I could install the new Oxygen ROM.
After using the HARD SPL, I coud succesfully install the Oxyen 6.5:http://forum.xda-developers.com/showthread.php?t=445666
But, after I tunred off the phone and introduced the sim card the elf wont start any more.
It just shows "smart mobility" for a couple of seconds and that's it, display goes back to blank.
The only thing I can do is press start button + camera and the phone goes in the RGB mode, writing the SPL & IPL
IPL 2.20.0002
SPL 1.11.0000
Any Idees how can I put the phone back on the feet.
Any input is very much apreciated.
Thanks
Are you sure Oxigen is a rom for elf ?
Hi
thanks for the quick answer, acually I have to admit I'm pretty new to wm.
Accordingly to this website it shows ONYX as an ROM.
http://forum.xda-developers.com/showthread.php?t=426540
~ ONYX ~
Windows Mobile 6.1 & 6.5 ROMs
____
I tried every step from this thread, but nothing worked for me
http://forum.xda-developers.com/showthread.php?t=347700
and this as well:
http://forum.xda-developers.com/showthread.php?t=379318
Hopefully you can help me
Cheers
Obviously your device isn't cid unlocked any more, try the procedure again, and if it doesn't work, go to elf upgrading forum and search for stuck in smart mobility.
that's exactley what it was...thank you so much for your Help!
Related
Hi guys i try the last days to update a new rom on my elf/touch.I read the threads download the suggested packs and so on.
ipl 2.81.0002
spl 2.81.0000
problem it doesnt work. i get always the error message : Error 270 [file corrupted]
I hope someone can help me and give me a manual how to manage that, i have to say im a technical noob :-/
thanks
plz tell your phone is gsm or cdma version and if gsm is it elf-3450, or elfin -3452, and which rom you tried to flash and what is your device id(U can get this in system Info) and whether u cid unlocked the device before flashing rom
i am unable to upgrade my rom to wm 6.1
plz help me
system info is here..
HTC Touch device information - by dsixda
Touch version : Elf
Device ID : ELF010000
CID : HTC__J15
IPL : 2.20.0002
SPL : 2.20.0000
ROM Version : 2.20.456.1
ExtROM Version : 2.20.456.101
Operator Version: None
AKU Version : 0.4.2
Page Pool : 8 MB
RAM Size : 64 MB
ROM Size : 128 MB
Model No. : ELF0300
Part Number : 99HDM063-00
MCC+MNC : Not found
IMEI (private) : 35xxxxxxxxxxxxxxx
Serial Number (private): HTxxxxxxxxxxxx
MAC Address (private) : 00xxxxxxxxxxxx
http://forum.xda-developers.com/showthread.php?t=432776, download R2 full and flash
ipl 2.81.0002
spl 2.81.0000
rom:2.81.111.1 ger
protokoll:4.1.13.42
ext. rom vers. 2.81.11.103
cpumap850
mod:elf0300
so i hope anyone can help me i try to flash new rom like:
Tabish_Rom_v3.1.6.1
Onyx_3.0_8MB_4MB_RUU
Opal Port Full
greetz
http://forum.xda-developers.com/showthread.php?p=2603802
follow watevr the procedure written here. i had the same problem till last day n now i ve tried 3-4 different ROM since yesterday. gud luck.
Hi guys i try the last days to update a new rom on my elf/touch.I read the threads download the suggested packs and so on.
ipl 2.20.0002
spl 2.20.0000
problem it doesnt work. i get always the error message : Error 270 [file corrupted]
I hope someone can help me and give me a manual how to manage that, i have to say im a technical noob :-/
thanks
Here is my problem. A friend of mine bought in Singapore a HTC Touch. He gave it to me and i CID Unlock the phone, a year ago, and put the Blue Touch ROM on it. It works perfect.
Now i bought the phone, and want to make CID Unlock again, to put a german ROM on it. But it didn`t work for me. I tried it with the Unlocker from the forum here. It works till the white Screen and then the pc didn`t find any connection to the phone...
I hope somebody know what to do..
HTC Touch device information - by dsixda
Touch version : Elf
Device ID : ELF010000
CID : DOPOD001
IPL : 1.15.0002
SPL : 1.15.0000
ROM Version : 1.15.721.2
ExtROM Version : None
Operator Version: None
AKU Version : 0.3.1
Page Pool : 8 MB
RAM Size : 64 MB
ROM Size : 128 MB
Model No. : ELF0300
Part Number : 99HDM034-00
MCC+MNC : Not found
I hope somebody can help me.
greetz DannyMcFee
Hi, a few months ago I posted this exact same question, but I didn't get any answers that worked, so I figured it couldn't hurt to try again.
Device info:
Touch version: Elfin
Device ID: ELF010050
CID : BSTAR502
IPL: 3.14.0002
SPL: 3.10.cmonex
ROM version : 3.14.706.02
ExtROM version : Cooked by dsixda
Operator version: Onyx Ultimate 4.6
AKU version : 1.6.4
Page Pool: 12 MB
RAM Size : 128 MB
ROM Size : 256 MB
Model No. : ELF0100
Part Number: 99HEH077-00
MCC+MNC: Not found
IMEI (private) : 3XXXXXXXXXXXXXX7
Serial Number (private): HXXXXXXXX2
MAC Address (private) : 0XXXXXXD
Click to expand...
Click to collapse
Problem: When I insert a chip it gets stuck at the screen to type the code, "You have tried 8 times. Please wait for retry", and believe you me when I say that trying to wait for days on end was the first thing I tried.
Failed solutions I've tried:
- Hard reseting
- Changing to a different ROM
- Changing chips
- Waiting
Anybody have any other solution, please, I'm all ears, or in this case, eyes.
Thank you in advance.
Gold card method, try it.
how many time say to wait ???
if you have another simcard and put to chargue and wait for insert your unlock code
HI everybody...
A friend of mine has a HTC Touch that was working ok..
It is branded Rogers and it was locked to that company..
The story is that he gave it to someone to unlock it. But the man returned him still locked.. But with an issue..
Everytime you insert a SimCard the phone reboots (even the one from ROGERS), without the simcard the phone works just fine..
I already did many hard resets. And once when the phone reboots it ask me for a subsidy code wich I already had and I unlocked the phone, and it worked ok until I turn it off to see if the problem still persist and it did..
Now the phone is unlocked but everytime I insert a SIMCARD (even the one from ROGERS) the phone reboots...
All the story is to see if someone knows what the other guy did???
What could cause the phone to reboot with a SIM CARD???
IT HAS
IPL 2.21.0002
SPL 2.21.0000
Model ELF101
THANKS A LOT and BEST REGARDS!!!
HELL
HTC Touch device information - by dsixda
Touch version : Elfin
Device ID : ELF010150
CID : ROGER001
IPL : 2.21.0002
SPL : 2.21.0000
ROM Version : 2.21.631.1
ExtROM Version : 2.21.631.102
Operator Version: None
AKU Version : 0.4.2
Page Pool (MB) : 12
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0101
Part Number : 99HEH006-00
SIM Unlock Code : 22162610
MCC+MNC :
00101F 302370 302720
IMEI (private) : 35847201xxxxxxx
Serial Number (private): 140H65T724G0 (scrambled 4 security)
MAC Address (private) :18414B14007B (scrambled 4 security)
No one could help me??? With a OS upgrade could work??
Hi all,
I've read the threads, read the stickys, so I realise to read them is the first advice everyone gives and it's logical, but I've ended up with 20+ tabs open in my browser where threads/stickys link to others and I'm totally lost... would someone please help a novice with a 'walk thru'.
I have a Touch P3450 (unmodified, so far) with Spanish OS which I would like to change to English. I assume the procedure is to backup the existing system and then flash a new. I am so confused that I would be happy if anyone could explain the procedure and even recommend which files to flash, is it just one file or multiple (radio etc).
Any help would be really appreciated. I have got as far as running the device info program, this is the results (I don't know if this is locked or not):-
Touch version : Elfin
Device ID : ELF010050
CID : VODAP304
IPL : 2.27.0002
SPL : 2.27.0000
ROM Version : 2.27.164.2
ExtROM Version : None
Operator Version: None
AKU Version : 0.4.2
Page Pool (MB) : 12
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0301
Part Number : 99HEH099-00
SIM Unlock Code : 97485131
MCC+MNC :
00101F 21401F
Thank you.
Welcome 7th son
So you already know the procedure
1 backup http://forum.xda-developers.com/wiki/index.php?title=Elf_HowtoDumpRom
2 cid unlock to 3.10 hspl http://forum.xda-developers.com/showthread.php?t=408637
http://forum.xda-developers.com/showthread.php?t=445666
3 flash latest Onyx rom http://forum.xda-developers.com/showpost.php?p=2826545&postcount=4
4 optional flash radio
And you can have a signature like mine
All the links are in the 1st page of this forum
Good luck
tito12 said:
Welcome 7th son
So you already know the procedure
1 backup
2 cid unlock to 3.10 hspl
3 flash latest Onyx rom
4 optional flash radio
And you can have a signature like mine
All the links are in the 1st page of this forum
Good luck
Click to expand...
Click to collapse
Hi tito12, thanks for the reply and the welcome
I've managed to backup the ROM, so one more step forward.
Sorry, but I'm stuck on #2 (cid unlock). I went to the link you provided and found the message headed :- "IPL 3.07, 3.10 & USPL 3.07, 3.10"... is this correct?. If so there are 3 possible attachments to download:-
IPL_USPL_3.07.zip
IPL_3.10.zip
ELFIN_USPL_310.zip
Do I need to run all three and can you tell me do I just run them from an extracted .exe file? (I saw a ref to running with 'prof' or something which I didn't understand).
Thanks
PS: Sorry the forum wouldn't let a newb retain your links in the quote.
sorry double post
Hi
It's been a long time since I did this and I don't remember if you can go directly to 3.10. So first flash the uspl 2.28 then if everything ok flash 3.10
http://forum.xda-developers.com/showpost.php?p=2515040&postcount=141
I 'think' I have completed #2 (cid unlock). The device_info utility now shows:-
Touch version : Elfin
Device ID : ELF010050
CID : VODAP304
IPL : 2.27.0002
SPL : 3.10.cmonex (Hard SPL)
ROM Version : 2.27.164.2
ExtROM Version : None
Operator Version: None
AKU Version : 0.4.2
Page Pool (MB) : 12
RAM Size (MB) : 128
ROM Size (MB) : 256
Model No. : ELF0301
Part Number : 99HEH099-00
SIM Unlock Code : 97485131
MCC+MNC :
00101F 21401F
Is this correct and can I now try moving onto flashing Onyx?
Great
Try to change the ipl too but I think it's not essential.
You can flash any cooked rom now, I use Onyx for more than a year
tito12,
Thanks for your help.
I'm not 100% sure how, but I've done it... now running Onyx
From reading the stickys and threads, it isn't apparent to a newb (me anyway) that some of these utilities have a GUI (menu system) and it seemed a bit under explained when people just said... install this, flash that etc. Not too daunting when you actually get stuck in.
I didn't do anything with the IPL (seems to work as is) nor the radio... is it worth updating the radio and/or anything else???
Thanks again.
Glad I could help
You're right about too much information getting in the way but let's not forget this is a developers forum and we are not
As for radio you can experiment, as a rule the later the better but not always...