Wi-Fi Static IP - HD2 General

I have DHCP enabled on my router but for some annoying reason my HD2 seems to want to pick the IP address 192.168.1.1 even though my router should be assigning IPs in the range 192.168.0.3 - 256. Please could someone tell me how I go about assigning a static IP to my HD2? I have gone through all the settings and have google searched but come up with nothing. The address it picks means that it will be incompatible with my network and cannot access the internet.
Is it the settings under Broadcom 802.11 DHD Network Driver or Broadcom 802.11 Network Driver?
Thanks

de5perate said:
I have DHCP enabled on my router but for some annoying reason my HD2 seems to want to pick the IP address 192.168.1.1 even though my router should be assigning IPs in the range 192.168.0.3 - 256. Please could someone tell me how I go about assigning a static IP to my HD2? I have gone through all the settings and have google searched but come up with nothing. The address it picks means that it will be incompatible with my network and cannot access the internet.
Is it the settings under Broadcom 802.11 DHD Network Driver or Broadcom 802.11 Network Driver?
Thanks
Click to expand...
Click to collapse
I can't remember where you assign a static IP address, but I'll warn you against it.
I did this a while ago and found that wifi worked as normal, but I couldn't get a data connection any other way. It was trying to assign the static IP address even when not using wifi, and obviously my provider's network didn't like giving me a 192.168 address.
My suggestion would be to assign the IP address to the MAC address of your phone. I've got that setup on my home router cos someone was "using it" without my consent. It now has a list of valid MAC addresses (PS3, Xbox, Phone etc..) and assigns each specific IP address to a specific piece of hardware.

Did you manage to fix that problem? In that case, how? The same occurs for me but I don't know which IP the phone suggests, where can I see that?

de5perate said:
...
Is it the settings under Broadcom 802.11 DHD Network Driver or Broadcom 802.11 Network Driver?
Thanks
Click to expand...
Click to collapse
I've done this oce using the Broadcom 802.11 DHD one.
You could also try to use a utility like vxUtil (albeit an old tool) or another one of your preference to check your IP config per adapter and try to ping stuff. This way you can easily check your config changes.

erik.alphenaar said:
I've done this oce using the Broadcom 802.11 DHD one.
You could also try to use a utility like vxUtil (albeit an old tool) or another one of your preference to check your IP config per adapter and try to ping stuff. This way you can easily check your config changes.
Click to expand...
Click to collapse
What's the difference between "Broadcom 802.11 Network Adapter" and "Broadcom 802.11 DHD Network Adapter" ?

i would recommend using WifiProfiles, although i dont use it on my HD2, it worked perfectly on my TG01, Atom and Neo.
once again, like vxUtil (mentioned by erik.alphenaar), it is pretty old.
good luck, and please share your findings, i'm sure i'll run into the same problem soon.

Kev007 said:
i would recommend using WifiProfiles, although i dont use it on my HD2, it worked perfectly on my TG01, Atom and Neo.
once again, like vxUtil (mentioned by erik.alphenaar), it is pretty old.
good luck, and please share your findings, i'm sure i'll run into the same problem soon.
Click to expand...
Click to collapse
Thank you. Good working in my HD2

de5perate said:
I have DHCP enabled on my router but for some annoying reason my HD2 seems to want to pick the IP address 192.168.1.1 even though my router should be assigning IPs in the range 192.168.0.3 - 256. Please could someone tell me how I go about assigning a static IP to my HD2? I have gone through all the settings and have google searched but come up with nothing. The address it picks means that it will be incompatible with my network and cannot access the internet.
Is it the settings under Broadcom 802.11 DHD Network Driver or Broadcom 802.11 Network Driver?
Thanks
Click to expand...
Click to collapse
Just stop WIFIROUTER application (service) on you HD2... When this app (service) is started then your phone acts like a router (routing Cellular data to WiFi) and your IP will always be 192.168.1.1 (i think) and phone DHCP serves other IP addresses to the clients that will be connected to him.

Related

WiFi

Could someone please help? I;ve got a spectec wifi card, WM5 driver. I get the antenna symbol, but no bars or signal strength. I 'configure' the wlan 11b network adapter for server assigned IP address AND connection to 'the internet' but no joy. Is there something at the router end i need to do?
What device are you using? why the WM5 driver? Is that driver also backwards compatible with WM2003?
Its the compact II, hence wm5. The spectec wlan card is backwards compatible with wm2003, but drivers are specific to the os (at least that's my understanding) Well, when i tap on IE i just get 'connecting' and that's it. Any ideas? Spectec don;t seem to be responding...i don;t know if its a driver issue or what...
Philo said:
Its the compact II, hence wm5. The spectec wlan card is backwards compatible with wm2003, but drivers are specific to the os (at least that's my understanding) Well, when i tap on IE i just get 'connecting' and that's it. Any ideas? Spectec don;t seem to be responding...i don;t know if its a driver issue or what...
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewforum.php?f=20
You'll get the answers in the correct forum. Just go to the link above.
Mda Compact II, htc-charmer,etc,etc..but what's in a name? Man, this is the right place ?!?
my mistake....keep forgetting that there is a Charmer out there :lol:
There isn't an official forum for the Charmer as yet in this site....what is your router brand? Can the WLAN detect the SSID of your router? Is the SSID broadcast in your router switched on?
First thing is that your Wi-Fi must be able to detect that there is an access point nearby and should at least pick up the SSID of your network.
Philo said:
I 'configure' the wlan 11b network adapter for server assigned IP address AND connection to 'the internet' but no joy. Is there something at the router end i need to do?
Click to expand...
Click to collapse
You'd be better off using the DHCP to "ON" on your wifi server. But if you manually configure it to use your own IPs, you also need to manually configure the IP settings on your Handheld. I cant tell specific details of how to do it on your handheld because i dont use spectec wifi card. But you should be able to look at its settings and tweak it.
Also make sure, as O2mininoob above said that your SSID must be Broadcast. Also make sure that MAC address filtering is OFF, otherwise you also have to manually input your handheld's MAC address.
Let me just add, i'm running apple-mac wireless networking - does that really matter? I can access wireless via non-Mac laptops - a second point, the spectec wlan utility on the mda won't open even after reinstalling.
Ok, I;ve disabled all restrictions on wireless clients on the base station -
But i;m not sure what SSID is, nor can i find anything about broadcasting under the settings.
P.S But there's one thing i don't get which might be of some significance (or probably not!)
1. Under the 'internet' tab on the PC (not the mda) which deals with TCP/IP settings, i'm showing one IP address which is teh same as the router address.
2. Under the 'network' tab (which deals with how the base-station's internet connection is shared with other computers) I'm sharing a single IP address using dhcp which is different from the above IP and router address.
Does the difference between 1 & 2 mean anything? Three laptops in the place are connecting without problems.
Well, thanks for any light on the matter
Sorry i dont know anything about apple-mac networking, but, if your other computers can connect to your router, then theres no problem with your router...
the problem might be with the way you connect your handheld to your router...
you configure your handheld the way you configured your computers to connect to your router.
about SSID> on your hanheld, if you perform a search for wireless network, can it find your wireless network name? (example> ''Belkin Wireless'' or ''Netgear'').
if your handheld fiinds it, then dont worry with SSID as im sure it is being broadcast.
also, make sure that wireless mode is set to both 802.11b and g.
My Spectec card came with drivers and a WLAN Utility program. When you run this program, it usually displays the SSID with the strongest signal. Do you have it installed in your PPC? What does it say when you run it?
Also, go to Settings -> Connections -> Network cards. If your Spectec driver was installed correctly, you'll have a window displaying all the SSID's that the card has detected. Tap and hold on your router's SSID and tap connect.
HTH. Good luck.
Spectec tells me that the wlan utility is incompatible with WM5. And i;m not getting a list of any SSID's. I've pretty much given up! Cheers for the feedback.
There's a WM2005 Spectec Driver here. Maybe you can try downloading this one, un-install the one in your PPC and install the new one.
Good luck.

i mate k-jam WIFI problem?

the WIFI state is connected. but when I try to open a webpage, eg,www.google.com, it shows error: the page cannot be found. Check the name and try again. anyone knows that? how can I fix it?
Thanks.
HELP ME
Someone can help me?!
Where are you using the wifi? Is it your home network or work/hotspot?
Go to settings then the connections tab then tap the "wireless lan" icon. Tell us what you see on that screen, then click the advanced tab and tell us what is there too. Finally click "menu" then "network cards" and tell us what is there (should be a list of available networks).
The only problem I have with my wireless is that i need to have a very strong signal to be able to receive my IP address via DHCP. Once it has it then it's OK and i can wander about but I get no address when the signal is weak ( less than 50%).
Cheers
Gadget.
tatata
Check that you have set the connection type to "internet" - I suspect this problem occurs because you have it set to "work".
Chris
I am having the same problem , my signal is nearly 100%, the phone is set to internet, Belkin 54g,, authentication is 'open', WEP, the key was entered manually (26 digits ), do i use 802.1 access ?
mode is infrastructure, tx rate is auto, channel 11,, the mac and ip address is correct,, what is enroll ?
I have tried everything and it is obviously connected so why will it not load pages ?
Had the same problem myself with my XDA IIs. Only solution I could find was to turn disable the firewall on my router. No idea why that worked, and cant find a way to turn the firewall on without causing the problem again, but it did work!
got smilar problem here, some times even when i connected and browsed web say 2 mins. ago suddenly connection can not be established i have tried it with belkin 54g linksys and 3com routers all same couldnt find any solution and accepted it as it is
gadget_uk said:
Where are you using the wifi? Is it your home network or work/hotspot?
Go to settings then the connections tab then tap the "wireless lan" icon. Tell us what you see on that screen, then click the advanced tab and tell us what is there too. Finally click "menu" then "network cards" and tell us what is there (should be a list of available networks).
The only problem I have with my wireless is that i need to have a very strong signal to be able to receive my IP address via DHCP. Once it has it then it's OK and i can wander about but I get no address when the signal is weak ( less than 50%).
Cheers
Gadget.
Click to expand...
Click to collapse
hello All and Gadget
Bought the XDA mini S from 02 yesterday and havent really been playing with it except installing programs, removing the 02 files and finding my way round the phone.
Anyway, having problem with getting WIFI, can anyone help?
At home, I use Wanadoo broadbrand wireless 'livebox' and here are the following details on the Mini S:
Wireless Lan> main tab> SSID - blank, mode - infrastruture, BSSID -blank, Tx rate - auto, channel - 0
Advanced tab > status, not connected to network, MAC - 00-09-2D-8D-66-BF, IP - 0.0.0.0
network cards tab> wireless tab - wanadoo - 2D9E available
network adaptors> network card connects to 'The internet'
Thanks in advance
Andy
Might be a stupid question but.....
Have you got any security on your wireless router? if so have you permitted the MAC code of your device to connect and obtain an IP address from your router?
Anthony.
an2ony said:
Might be a stupid question but.....
Have you got any security on your wireless router? if so have you permitted the MAC code of your device to connect and obtain an IP address from your router?
Anthony.
Click to expand...
Click to collapse
Thanks for the prompt reply. Another stupid question is how do I find out if I have security on my wireless router and if i have security, how can i permit the mac code to do its stuff.
Thanks again.
Andy
Check out:
http://help.wanadoo.co.uk/resultDis...Configuration+Manager&resultType=5002#Goto155
Have you set up a WEP security key to prevent unauthorised access to your ADSL Connection? if not then you should; I think the 'LiveBox' has a default key which you have to enter to connect and obtain an IP address.
Not being familiar with this router, I cannot tell you exactly but I would expect you to have to permit a new MAC code under the 'associated devices' menu.
Sorry for being Vague.
Hope this helps. :roll:
an2ony said:
Check out:
http://help.wanadoo.co.uk/resultDis...Configuration+Manager&resultType=5002#Goto155
Have you set up a WEP security key to prevent unauthorised access to your ADSL Connection? if not then you should; I think the 'LiveBox' has a default key which you have to enter to connect and obtain an IP address.
Not being familiar with this router, I cannot tell you exactly but I would expect you to have to permit a new MAC code under the 'associated devices' menu.
Sorry for being Vague.
Hope this helps. :roll:
Click to expand...
Click to collapse
Anthony
First of all, thanks for the link. I am able to see all the details (technical) of my livebox on the wanadoo configuration page.
There is a WEP key set and having tried to enter as much info on the relevant places on the mini s, no luck.
The mini s does recognise the 'livebox' and connects to it then drops off. However, it doesnt pick up any info from the 'box' to complete the relevant wireless tabs on the mini s.
Dont know how I'm going to resolve this but thanks for your help so far.
Shame not to utilise the Mini S with my current wireless broadband connnection.
Cheers
Andy
Hi All
Thanks for the advice so far and after so many attempts I am still unable to configure the mini s to use the wireless connection at home.
Need a huge favour. Would anyone give up a few minutes of their time to go through the configuration on the phone with me.
Please PM me your contact number and when it is convienent for me to call you back.
Much appreciated.
Andy
Hi Andy,
the settings depend to some extent on whether you have an access point (router) or shared connection.
You need to know the network name SSID, (and whether it's hidden)
WEP, WPA/PSK key,
Whether (as previously stated) you have MAC address control enabled in your router
Whether you have DHCP enabled (for automatic IP address from router)
Whether you need to log on (enroll) to password protected shares.
In the mini-S wifi>Menu>Network Cards>Network Adapters tab you should set your network card to connect to The Internet and check that the adapter (SDIO WLAN etc.) is set to use auto IP (if you have DHCP) or pick your own IP address if you have a fixed range.
If you have Zone Alarm or another firewall (I surely hope so :wink make sure that the (mini-S) IP address is in the trusted zone
Lastly; if you seem to be connected but you can't get any web pages - just a page not found error, try killing bloody ActiveSync on the mini-S, sometimes when I'm browsing I suddenly can't access pages and that's what the problem turns out to be - when you stop active sync running in the background it all starts to work again.
This is assuming you have a router not a shared connection which may be slightly different.
Oh....and read the threads about 802.11b and g, if your router only allows 11g the mini-S doesn't connect (I'd find the threads and point you to them but I gotta get back to work soz)
HTH (feel free to contradict or put me straight guys
:lol: )
Kim
cozzykim said:
Hi Andy,
the settings depend to some extent on whether you have an access point (router) or shared connection.
You need to know the network name SSID, (and whether it's hidden)
WEP, WPA/PSK key,
Whether (as previously stated) you have MAC address control enabled in your router
Whether you have DHCP enabled (for automatic IP address from router)
Whether you need to log on (enroll) to password protected shares.
In the mini-S wifi>Menu>Network Cards>Network Adapters tab you should set your network card to connect to The Internet and check that the adapter (SDIO WLAN etc.) is set to use auto IP (if you have DHCP) or pick your own IP address if you have a fixed range.
If you have Zone Alarm or another firewall (I surely hope so :wink make sure that the (mini-S) IP address is in the trusted zone
Lastly; if you seem to be connected but you can't get any web pages - just a page not found error, try killing bloody ActiveSync on the mini-S, sometimes when I'm browsing I suddenly can't access pages and that's what the problem turns out to be - when you stop active sync running in the background it all starts to work again.
This is assuming you have a router not a shared connection which may be slightly different.
Oh....and read the threads about 802.11b and g, if your router only allows 11g the mini-S doesn't connect (I'd find the threads and point you to them but I gotta get back to work soz)
HTH (feel free to contradict or put me straight guys
:lol: )
Kim
Click to expand...
Click to collapse
ello mate
I gotta agree with the activesync thing. I had the same problem as of 2 mins ago just tried exiting active sync and would ya believe it my wi fi now works. So i gotta say cheers mate!
cheers
tatata said:
the WIFI state is connected. but when I try to open a webpage, eg,www.google.com, it shows error: the page cannot be found. Check the name and try again. anyone knows that? how can I fix it?
Thanks.
Click to expand...
Click to collapse
I had the same problem with my Linksys WRT54G before. I upgraded the firmware (dowloaded from Linksys website) of my WRT54G and the problem solved.
New to the board (Just got my Cingular 8125) Having the same problem.
I get an IP addressfrom my router, it shows I am connected on my network settings, but still can't pull up any pages. It has never worked since I got it (only 3 days though) Someone please help us.
If >Connection Manager>Settings>WiFi Settings shows you have an IP address and are connected (Advanced :Status) then check your firewall settings and try stopping ActiveSync, always seems to do the trick for me
Also check out this post, could this be your problem?
http://forum.xda-developers.com/viewtopic.php?t=41469
@ cozzykim
I have shut down my zone alarm and don't have firewall enabled on my linksys WRV54G. ActivesSync is also closed. Still no luck
I will try to update my ROM it is not far fetched that cingular Jerry rigged the WiFi. I hope ther is a class action suit coming soon.
Thanks for your help.[/quote]

new hd but strange wifi problem....

hi guys,
i have just bought a new hd, but when i turn on wifi, it finds my router working on G speed, it connects, but the ip adres stays 192.168.1.131, and that ip adres is NOT from my router, it is set to use a ip adres given from the router but it's not working.
if i set the ip adres to a fixed one that is the same as one of the ip adresses from my router , i can use internet....turning the setting back to dhcp, i get the 192.168.1.131....
anyone??
Don't understand you problem, dhcp server normally try to give the same ip to the client, so its not strange that you get 192.168.1.131 every time?
could you please explain what you mean...
i use: use server-assigned ip adress.....but still the ip adres is not from my network....
mickeymouse said:
i use: use server-assigned ip adress.....but still the ip adres is not from my network....
Click to expand...
Click to collapse
Then your dhcp server is messed up and distributes wrong ip addresses. Normally you can re-configure it using the web interface (or command line).
well all my other client pc's ( wifi and ethernet connected) work fine with good ip adresses...
could it still be a router problem??
Are you sure you are using the WiFi ? Isn't your HD still using the GPRS (or Edge or 3G) for data, even when Wifi is ON ?
yes i am sure....if i enter an ip adres that usualy is from my router, i can work on internet...so it connects fine to wifi, but is not getting the right i adress....
hmm check your Routers DCHP servcer settings and see if its leasing out the ip to HD
i checked the dhcp log from the router and i see that the hd gets 192.168.1.105.
but in my hd it says connected to network with ip adres : 192.168.1.131.
if i set the 105 ip as fixed ip in the hd, i can use internet......
realy strange....
is there any possibility that your HD connects to another router nearby...?
stsalkit said:
is there any possibility that your HD connects to another router nearby...?
Click to expand...
Click to collapse
That would be the most probable explanation to this problem .
You have probably connected to another router and set that as your preferred connection. Or maybe set it to connect to it even if the network is offline.
darkside80 said:
That would be the most probable explanation to this problem .
You have probably connected to another router and set that as your preferred connection. Or maybe set it to connect to it even if the network is offline.
Click to expand...
Click to collapse
yeah right....
stsalkit said:
is there any possibility that your HD connects to another router nearby...?
Click to expand...
Click to collapse
same issue with other routers....

Wifi but no Internet

Since I bought the HD2 before 2 month and after 2 Rom upgrade I still have the same Wifi problem. I can connect to my home network and the Router can see the HD2 but I can not connect to the Internet through the Wifi. All other computers and PS3 connect just fine. Ip adress seems also ok.
Please help ?
I did have the same problem a while back, and it occured after I used the wifi router. Have you ever used that, even just to try it?
No I never tried the Wifi Router even once and changed rom twice.
quincy67 said:
No I never tried the Wifi Router even once and changed rom twice.
Click to expand...
Click to collapse
Probably not the same issue then. For some reason I had it trying to give me a static IP address that my router wouldn't allow (I've got MAC forwarding on my router to make sure that nothing other than the 4 things I have can connect to it).
When you connect to the wifi, can you open the router admin on your HD2?
Thanks for your help. No I cannot access the router from the HD2, could it be a proxy issue. I am not using a proxy for the internet
quincy67 said:
Thanks for your help. No I cannot access the router from the HD2, could it be a proxy issue. I am not using a proxy for the internet
Click to expand...
Click to collapse
No worries mate - I hope I can help!
It's not a proxy issue, if you're not using a proxy server. Could you try this and let me know how you get on?
Start your wifi connection
Go to all settings, connection, wifi, wireless networks, network adapters tab
Select the Broadcom DHD adapter
It should be set to use a server assigned IP address, not a static one. It probably is, but it's worth checking.
When I open Wifi settings I can only open advanced no wireless networks or network adapter tab. How do I get there ?
quincy67 said:
When I open Wifi settings I can only open advanced no wireless networks or network adapter tab. How do I get there ?
Click to expand...
Click to collapse
After you've started wifi, go to the settings tab, menu and all settings. Then carry on the instructions in the last post.
Found the all settings, the DHD adapter is set to server assigned. Any other ideas ?
...
Well i think we have the same problem.. If you try to connect your wireless, do you get the failure after pressing get IP: Cannot obtain serverassigned IP....
http://forum.xda-developers.com/showthread.php?t=627654 my thread was this..
I found out that if i you go under WIFI>ADVANCED>press on the NETWORKCARD under the field "SSID"> then go to the networkcard>Broadcom 802.11 DHD network adapter>remove the pin in use serverassigned, and write a static ip: example: IP: 192.168.1.23
UNDERMASK: 255.255.255.0
STANDARDgateway: 192.168.1.1
That helped for me, though i cannot use that fix because my college wont accept the static IP. so it works for like 2 mins and then it disconnect. hehe.
Heh - that would be pretty much my next suggestion.
Try a static IP address and see if that works. It's not a long-term solution, but it would determine whether it's your phone or the router that's having the problem.
Last time I set a static IP address, I liked it and left it like that, but I found (after a couple of days with no internet access) that it tries to assign the same IP address when you use your data connection for internet access. Your service provider is very unlikely to allow you to use the same IP address, so you probably can't connect.
Like I said, it's a test to see if you can connect - not a solution.
Do you know what IP addresses your router will allow you to use? Do you have a specified range of addresses, for example?
I have this exact same problem. I can connect to wifi networks at home, office, etc... But no network access. It connects to the AP's, gives me an IP Address, but I can't ping anything!
This thing gets more and more frustrating daily.
skwizod said:
I have this exact same problem. I can connect to wifi networks at home, office, etc... But no network access. It connects to the AP's, gives me an IP Address, but I can't ping anything!
This thing gets more and more frustrating daily.
Click to expand...
Click to collapse
It also happened to me. Turns out it was the router I was using. I bought a new one earlier today and problem solved!
Hi!
I got a d-link dgl-4300 router, and had problem getting a IP adr. from it. When I gave my HD2 a static IP it worked, but very slow. After I changed from DHD network adapter to NE 2000 compatible ethernet driver it get IP from router and I can browse internet through wifi fast. Maybe it can help u 2.
regards Xes.

HD2 Android WiFi Problem - Experience Sharing

The strangest thing I have even experienced, and perhaps can save you time and headache.
** Summary (for those not wanting to read the whole story, but just the fix)
If your HD2 Android can connect to your home WiFi but cannot access Internet, check if your WiFi network uses a 192.168.20.x IP subnet address. The HD2 Android's USB port uses the same subnet, causing a conflict. If you change your home WiFi to use any other subnet, it will work fine.
** The Long Story
Been reading and admiring all the Android developments in XDA-Developers for some time, finally decided it was time to give it a try. Picked one of the more popular and stable MDJ Froyo (Desire HD) for SD and loved it.
Problem is couldn't use the Internet via WiFi from my home. Internet via GPRS works fine, Internet via USB/PC works fine, just not WiFi. The connection to WiFi is successful, picks up a DHCP IP address just fine, but no Internet.
Oh well, perhaps there is a WiFi bug in HD2 Android not reported so never mind.
Wait! On a business trip, when HD2 Android connecting to the hotel's WiFi, Internet works fine! Subsequently in many other places WiFi works also flawlessly.
Must be the WiFi router at home. Not too surprising as I don't use much wireless but wired all my other computers (including notebook PCs), it is faster anyways.
So went back and tested WiFi on a notebook PC (prior to that upgraded the WiFi router's firmware), PC connects and works, but HD2 Android still not. Tried all kinds of WiFi and encryption combination (BGN, BG, G only, WPA2, WPA, WEP), just nothing works for HD2 Android. >> Conclusion: not the WiFi router at home, just HD2 Android working with this particular WiFi router.
Finally (but forgot what app it was), I saw the USB port binding to 192.168.20.x subnet, exactly the same as my LAN subnet in the WiFi router.
Bingo, changed the LAN subnet to something else (really anything is fine because it is inside a NAT so not an issue getting out to the Internet) and HD2 Android works like a charm.
Hope this helps.
sorry, can you explain more where to change in the router settings? i can't find anything to change in my wireless settings
Look up the LAN (local area network setting) in your router, where the IP address for most WiFi router is set to use 192.168.0.1
In my case the WiFi router is set to use 192.168.20.1 (and DHCP to pass out 192.168.20.x IP addresses).
By changing the IP address of the router, most router automatically change the DHCP assignment to corresponding subnet, say from 192.168.20.1 to 192.168.x.1
x can be any of 0 to 255, just not 20 for my case or it causes conflict with HD2 Android.
Hi Dear friend , And Thanks for sharing experiences.
I have the same problem , but my router's setting is :
IP Address : 192.168.1.1
and my Starting IP Address : 192.168.1.100
IP Pool Count : 101
DHCP : Enabled
NAT : Enabled
Default Route : YES
but no webpage loaded , the weather not work . but the meebo messenger
with my yahoo ID just worked .
so how can i fix it ?
tnx
I notice the conflict (with my 192.168.2.x) when I checked the HD2 IP addresses (after connecting to the WiFi). When I see the USB port bound to 192.168.2.x I know the two just conflict with each other.
If something (meebo messenger?) works but not others... could it be your HD2 not getting name resolution (DNS ?). Say if you try opening this do you get the Google page:
http://74.125.153.104/
** This is Google's page without the need to resolve via DNS.
webmice said:
I notice the conflict (with my 192.168.2.x) when I checked the HD2 IP addresses (after connecting to the WiFi). When I see the USB port bound to 192.168.2.x I know the two just conflict with each other.
If something (meebo messenger?) works but not others... could it be your HD2 not getting name resolution (DNS ?). Say if you try opening this do you get the Google page:
http://74.125.153.104/
** This is Google's page without the need to resolve via DNS.
Click to expand...
Click to collapse
hi my friend. I tested it with IP but nothing changed.
but some of the WebSites with SubDomain Loaded. like : http://2.farsihiphop.com
and can u tell me how can I know about the port nimber . like USB port.
i think my Android's Kernels have been changes. maybe i'll can find something like this (equal IP address)
thanks.
I have following problem : At my university i have hidden Wifi network, locked with password.. But, ofcourse, we cracked their password, and now we can use their WiFi.. But i cant use it.. On WM i could use it .. One more thing to mention, there is a proxy u need to setup before u can go on internet trough that Wifi network.. but thats not my concerne yet.. I cant get connected to that Wifi.. I make new conn, with password and other settings, and it keep saying : Connecting... Disconnected...
Any ideas to help me ?
Thanks in advance
I had the same problem. I solved it by updating the radio to version 2.14.50.2. I think this version works best.
For me 2.15.50.14 works, too...

Categories

Resources