I hoped to find some help on this forum, because the official nimbuzz forum couldn't so far.
Some weeks ago I used skype out via nimbuzz on my own wireless network. Suddenly I didn't hear anything anymore. Since then I can't use skype out anymore. I do hear the dialing sound, but when the person picksup I dont hear anythjing anymore. The other side can hear me.
On the official nimbuzz forum they told me it had to do with firewall on my router. I opened the suggested UDP ports in the range: 15000 to 65000, but no effect.
Also same results on edge and hsdpa network.
In the mean time I flashed several rom, stock and cooked, but still same results.
Does anyone has an idea what the issue can be? Skype is working, but I uses the external speaker and I like to have some privacy.
i got also the same problem as youre..would anyone know how to tfix this things? thanks.
Related
hi,
i can't seem to get it working. people can hear me, but i can't hear them
Anyone got this working?
Thx
it should work, i have not tested it but it should work, the files and registry entryes are taken from a hermes rom for which i am sure that it work and it is the same core and build as ours
i was able to launch the setup earlier... and decided to do it later on..
but when i tried after 2 days ... it just crashed...
did uninstall... softrest... install.. routine few times... and gave up.
I successfully connected to my Hungarian Voip provider (megafone) but no sound at all. Dialing is okay, but I cannot hear it ringing out, cannot hear the other party, they can't hear me. However the connection is there and the connected seconds are charged.
GSM phone, Skype and Fring are working well, only the Ms Voip has problems.
My settings look like this. The 'Dial plan' tab is empty. Is this normal?
Also noted that it didn't terminate the call normally as I pressed the red button, it kept charging on for 15 minutes of talk...
well now i think that something is missing, maybe audio encoders and decoders on which VoIP is dependant, i will look into this and will keep you posted
My tip is also codec-related.
Is it normal that via ActiveSync the voip says No Service? With WiFi it says Available, I think it should also with ActiveSync.
are there any news?
I don't have an issue with VOIP working on my SX66. In fact, I was surprised by how easy it was to get going.
-Chris
You were lucky that your provider uses the same codec as this WM6 build does.
Since I don't use something like Vonage, or Comcast VOIP, I just went out and found a VOIP provider online. VOIPCheap.com works great with this build.
-Chris
Many of us prefer a local VoIP provider though.
VoIP Incoming RTP
Some additional info on the problem with receiving audio. (same is on my phone). I checked which codec this SIP stack negotiates.
Apparently, out of all available, MS VoIP settles either on PCMA or PCMU depending on the other end availability, and refuses other most common ones.
Well, it encodes and sends RTP which I receive on other non wm6 phones and I am sure it receives RTP, and may even decode it, but by the look of it, not a squick is sent to the hardware/speaker.
Cheers
===
Sorted by installing Voip support from (ftp://xda:[email protected]/WM6VoIP.CAB)
and installing on top of the existing (from voip.cab - can't remember the source).
Although the dialplan tab is still blank (requires ipdialplan.xml, I guess) but the SIP settings are remain intact after this 'patch'.
====
I've just tested the MS voip with 3 different VOIP providers, and I also have the "sound" problem with it.
When I use an other VOIP application (like SJphone) all is working fine, so it must be a codec problem that is missing.
I just looked at VOIPCheap.com website. It's sounds interesting. Never tried VOIP from BA. Can someone tell me what i need to do to use VOIPCheap.com on BA to make VOID calls apart from creating an account with VOIPCheap.com? Thanks guys.
Never Mind. Please ignore my last msg. I think i got the answer on there website in FAqs. I'll create the account and see how good it is.
Anyone have any good/bad feedback for VOIPCheap.com service?
Thanks.
There are a lot of threads for VoIP problems in the forums many issues are solved there, i suggest al of the VoIP users to search and read there. Also i understood that difrend providers use difrend encoding-decoding so thats why it works for some and not for everybody
did someone find a fix for the muted audio issue?
i've read many threads about many voip issues on the other forums available here, but it seems like the small amount of ppl who had this problem was left quite alone..
I'm trying to place calls via my asterisk 1.4 box.
thanks
Hello guys! I have been trying to make internet calls with my new HTC HD2, and so far I have not managed to make it work properly.
Actually after testing PortSip I almost got it, but the problem I have with this software is that my voice is not being heard at all/clear enough. I can hear the person I'm calling very well, without delays, but they can not hear me. I tried using BT headset, normal headset, and without headsets for the same result, not being heard.
Could it be that the microphone is set too low? is there any way to increase it?
Any help would be appreciated.
Thnx.
I use PortSip without any such problem....
Try fring as an alternate solution...may work for you...
Are you connecting to your own VOIP server? If so, make sure that the correct ports are open.
I had the same problem with portsip. I find Agephone to work nicely, only problem with it not being able to direct sound to the earpiece so you will need some software that does that instead.
After a lot of testing, I'm still in the same situation. I'd be great to make voip calls to work. I am certain there's some settings in windows mobile (codecs maybe) that my voip provider don't like, and therefore calls drop.
My voip provider is Saunalahti (Finland) which actually rents the gsm network from Elisa.
I am trying making calls from two different voip accounts, calling other voip numbers and normal gsm numbers. I am using one HD2, one TYTN and a Softphone that Saunalahti offers.
The only way that the calls work is calling from the softphone in the PC, no problem there. I have audio both ways and calls do not drop.
If I call from:
wm to PC, call drops (lasts 2 sec)
wm to wm, call drops (lasts 2 sec)
wm to gsm, connects but the other person can not hear me
One wm is using 3G and the other is using WIFI. port 5060 is open in the registry.
Like a said earlier, I have tried different programs, but it's the same scenario.
Any idea on what the problem actually is? thnx i nadcance.
Hi guys,
I am interested in VoIP calling with my HD2. I don't know much about this, and I would like to be able to use it when I travel to Mexico next month. I know that Blackberry's have UMA technology or soemthing like that to make WiFi calling for free back to the states. Will this PortGo/PortSip program do the same thing if I use the free version, or buy the Professional version?
האם אפשר לקבל עזרה בעיברית להפעלת voip
gorelshv said:
i had the same problem with portsip. I find agephone to work nicely, only problem with it not being able to direct sound to the earpiece so you will need some software that does that instead.
Click to expand...
Click to collapse
האם אפשר לקבל עזרה בשפת הקודש?
Ok, so apparently according to the reviews of the Skype app for Android, there is a non-verizon version (people on at&t were saying they got wifi). Is this true? And does anyone know how I can get this version on my phone so I can stop relying on the crappy reception I get at my house?
You may try Fring instead Skype. It's support also others Voip and SIP protocols. Just download it from market.
Fring looks sweet, but I'm having trouble with it on my moto droid. I tried answering a call on skype, and they could hear my voice but I could not hear anything on my end. Even the test call failed. Skype seems to work fine for me, but it is buggy, and I'm unable to place group calls. Also no wifi sucks too. If there is a version that supports wifi, please update this thread!
Sent from my Droid using Tapatalk
have u tried Nimbuzz?
skype pull out from nimbuzz and fring.. sigh.
nimbuzz is still working.. but it is bad compared to skype.. got 5 sec lag.. and i can't really hear myself during the "echo123" test..
Hey guys!
I downloaded Nimbuzz today to use it for making calls via Skype, but I've got a major problem: While I can hear the other party perfectly, they only hear strange screaching noises coming from me...
I also tried using the skype echo123 service...same problem. I can hear perfectly but my recorded voice is completely distorted...sounds kinda like an old 56k modem dialing...
I tried it via 3G and WIFI its always the same.
Do you have any Ideas whats wrong and how it can be fixed?
Phone is a debranded and rooted X10i running 026 firmware.
Thanks!
I haven't had a problem with skype-to-skype calls yet... Maybe try uninstalling the apk, and reinstalling it?
when I use, I have a delay, like I say something and person listen for like a sec or 2 and then speak and I have to wait to get the reply. I am on wifi though
how do you use skype on 1.6 ?
PartyVirginX10 said:
how do you use skype on 1.6 ?
Click to expand...
Click to collapse
... Based on your username, I'm going to assume that this is a troll account... otherwise, how else would you miss the fact that this thread has "USING NIMBUZZ" in it's title.
I hate my life.
I reflashed yesterday, the quality of the recording to the echo service improved slightly, but now nobody can hear a thing from me when making "regular" skype calls...
Looks like I'll just have to wait for 2.1 and the official skype client then...
Hmmm. I just tried a 3G call via Nimbuzz to the echo123 account and it worked perfectly.
Are you using an external mic or the phone's mic?
I used the internal mic... but the bigger problem is that I can't hear the other side...except when calling the echo... they can hear me and the echo recording sounds like calling Mars but at least its understandable...
Exactly the same problem here, only tried over wifi
i think skype and nimbuzz are no longer friends....
what are you using now?
hey guy
Why is there is not skype available in market?
Is it because no support on honeycomb
I've got it installed. Didn't do an thing but search Skype
Thanks.. I manged to get skype installed from the skype website.
however i found that when i call the echo test to make a test call. My voice is very poor. Could hear lot of noise that device records. Has any one notices it?
I am pretty sure that its not my internet connection, as if i do a test call from PC it works like a charme..
I just tried it once and it wasn't great. GTalk works better.