this is really getting irritating but every time i put android on my storage card it wont work , i download the basefiles zip from vogue android and extract that to my storage card then download the system image and put that on my storage card and every time i start haret and it boots to android but it gets to the part where its searching for the system image and it says it cant dind it
Have you renamed the system image to system.sqsh?
no it was system.img but i havw also tried another system.sqsh and neither works
Put the system image in the android folder on your Sdcard.
that could be why i will try thanks
If you use the latest Basefile HERE
And try this ION Donut build
Everything in root of your SD Card. Can be FAT32 or FAT32/Ext2/Ext2 (when you use F/E/E you must press Volume Down when he ask to run the installer)
And update your default.txt with this information:
set RAMSIZE 0x07000000
set RAMADDR 0x10000000
set FBDURINGBOOT 0
set MTYPE 1553
set KERNEL "\Storage Card\zImage"
set initrd "\Storage Card\initrd.gz"
set cmdline "board-htckaiser.panel_type=2 ppp.apn=internet ppp.username= ppp.password= pm.sleep_mode=0 mddi.width=320 mddi.height=480 lcd.density=160 no_console_suspend board-kaiser-keypad.atttilt=1 msm_sdcc.msmsdcc_fmax=32000000"
boot
Then it will work. It work for me and for some other...
Related
I would like to kick this off. should be not too difficult because blackstone has so much in common with diamond and raphael.
somebody brave wanna boot the raphael stuff? we got usb ethernet working on raphael and diamond in linux the other day. it's all in the kernel build from here
count me in
I uploaded the blackstone dump mmu from joshjdevl here http://linuxtogo.org/~lgorris/misc/blackstone-mmu.txt
could somebody post the early haret log ? create an new file called earlyharetlog.txt in the haret directory and run haret. it will create haretlog.txt with extra info. pastebin or post it directly here
attached haretlog.txt
hi, i tried to load the following, though it gets stuck again
initrd from http://www.netripper.com/raphael/initrd-netripper-busybox-usb.cpio.gz
bootkit from linuxtogo.org/tildelgorris/kaiser-bootkit
progress bar goes to 100% though nothing happens in haret
this is my default.xt
set MTYPE 1553
set KERNEL zImage-kaiser-new.bin
set RAMSIZE 0x7800000
set RAMADDR 0x10000000
#uncomment the following line and comment the set INITRD line to boot from the 2nd partition on micro sd
#set CMDLINE "root=/dev/mmcblk0p2 rootwait fbcon=rotate:3"
#set INITRD android.bin
set INITRD initrd-netripper-busybox-usb.cpio.gz
#if you want to use the angstrom console image use the following line instead
#set INITRD console-image-20081127.cpio.gz
bootlinux
presumably you cant get a verbose output during that 100% progress bar (is that kernel start up or init?).
shouldnt this be discussed in ROM devel forum though? it'll get lost in here is all i mean.
Hi,
when i tried running the Haret soft ware on my phone with the defult.txt document i kept receiving PLEASE SET START OF RAM (RAMADDR).
So i opened the default doc
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
but when i added
set RAMADDR 0X10000000
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
and tried running the Haret i get a whole new error message saying
terminating Haret due to unhandled exception
what does that mean. Please help and Thanks in Advance.
just making sure... but are you running it from your sd card?
im sorry but how hard is it to read the post FAQ & Instructions on hd2 android discussion?
download > extract > copy paste into sd card > run Haret and ur done
OP: you have the wrong device type (mtype) specified... Leo = 2524. mtype 1667 = HTC Kaiser, I believe...
set mtype 2524
set ramaddr 0x20000000
set ramsize 0x0fc00000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline ""
boot
If you have a Leo (HD2), then you grabbed the wrong startup (and likely wrong HaRET version)
Haret
My T8585 won't boot with
set cmdline ""
It has to be
set cmdline "mem=128M"
Don't understand why.
miksi said:
My T8585 won't boot with
set cmdline ""
It has to be
set cmdline "mem=128M"
Don't understand why.
Click to expand...
Click to collapse
check your radio.
I had this problem after flashing an official ROM. Took me ages to notice it had installed a lower Radio
Assuming you have gotten andoird working - why dont you just use this setting
set RAMSIZE 0x1A000000 (412MB) = 32*7
HD2 has 484MB right
I Tried 0x1C000000 - but that bum'd out .. so reducing it by 32MB , (maybe the working memory needed for the loaders to work ? .. who knows) ..
works fine now ..
uhmmm....it should be called startup.txt not default.txt, that's a good place to start (no pun intended)
Here is my issue
Downloaded the American Android 2.3 for TMOUS->Extracted Android folder to blank SD card /sdcard/Android->Opened up file manager on HTC HD2 /sdcard/Android and ran clrcad.exe got the untrusted popup clicked okay->Ran haret.exe got popup again clicked okay then saw a few white command lines (maybe 5) then the green HTC logo appears and sits there for ever. I let it sit for 30 min and no change had to pull the battery and restart windows. Phone is up to date only difference might be is it has been unlocked through T-Mobile. Does anyone know how to avoid this?
Yeah i got the same problem, tryed to change the, rel_path location in the, startup.txt but nothing helps :/
war3s said:
Yeah i got the same problem, tryed to change the, rel_path location in the, startup.txt but nothing helps :/
Click to expand...
Click to collapse
If you find a solution elsewhere let me know, I'm still looking. Are you trying to install the American Android 2.3 Gingerbread ROM? That is the only one I have tried because I have heard it's the best with fewest bugs.
Stephducated20 said:
Hi,
when i tried running the Haret soft ware on my phone with the defult.txt document i kept receiving PLEASE SET START OF RAM (RAMADDR).
So i opened the default doc
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
but when i added
set RAMADDR 0X10000000
set RAMSIZE 0x08000000
set MTYPE 1667
set KERNEL zImage
set initrd initrd.gz
and tried running the Haret i get a whole new error message saying
terminating Haret due to unhandled exception
what does that mean. Please help and Thanks in Advance.
Click to expand...
Click to collapse
me too have same problem please help any one
wifi not working just writ "connecting","scanning" after fix "error"problem
hi
I'm using Energy.Froyostone.HD2.Desire.Android.Aug.25
wifi is not working just writ "connecting","scanning"
before that I got"error" msg and now trying to connect but nothing happen
I change the zimage to the newest one
then i changed "startup.txt"
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set initrd initrd.gz
set kernel zImage
set cmdline "rel_path=Android"
boot
then using root explorer i changed "bcm4329.ko" to the newest one
after that nothing happen
please help me
Wifi is working with most builds as far as I know. I haven't tried your build but its working with shrubcrafts definatly. Confusing... have your tried another build it checked the deb's thread for what should be working.
You could try copying ur build to computer format card an recopying back
Sent from my HTC HD2 using XDA App
I was using the old build for Energy 11-aug-2010 and the wifi working then i changed the folder name to "android1" as backup and use the new build at folder "android" then all builds are not completely working with wifi I have try all ways but nothing happen
the amizing thing that to make wifi working is to lunch android from the old build "android1" and the newst build still in my sdcard
>>>> one more question how to backup all programs thad downloaded from market or install from sdcard and the contact with links to facebook ???
Have you tried doing this
http://htc-linux.org/wiki/index.php?title=Leo/Wifi#Firmware
Hi all,
now that there so many android builds released every now and then, why is it not possible to put multiple android roms on SD cards with different release names like :
- Android Mdeejay Desire HD
- Android Mdeejay Evo sense
_ Android Mdeejay Glacier
and then choose from withing WINMO to boot any of them instead of changing SD cards or deleting and pasting ......
is it a HARET thing ?
can this be solved ? or developed ?
Thanx.
You can, I do it all the time
Sent from my HTC HD2 using the XDA mobile application powered by Tapatalk
typongtv said:
Hi all,
now that there so many android builds released every now and then, why is it not possible to put multiple android roms on SD cards with different release names like :
- Android Mdeejay Desire HD
- Android Mdeejay Evo sense
_ Android Mdeejay Glacier
and then choose from withing WINMO to boot any of them instead of changing SD cards or deleting and pasting ......
is it a HARET thing ?
can this be solved ? or developed ?
Thanx.
Click to expand...
Click to collapse
This is possible. First you must rename the android folders like you mentioned. Then also edit the startup.txt now its set cmdline "rel_path=Android" to cmdline "rel_path=Android Mdeejay Desire HD" etc
Thank you Henv I'll do it now
And for your own convenience, use a multiple boot loader found here or here
Renamed 2 Rom versions and changed the start up file.... they won't boot...stuck on first splash screen HTC.
this is my startup files :
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "nand_boot=0"
boot
i don't have cmdline "rel_path=Android"
typongtv said:
Renamed 2 Rom versions and changed the start up file.... they won't boot...stuck on first splash screen HTC.
this is my startup files :
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "nand_boot=0"
boot
i don't have cmdline "rel_path=Android"
Click to expand...
Click to collapse
You must put my line into you're cmdline. So it will be
set cmdline "rel_path=Android nand_boot=0" where you edit android with the name youre give your folder
so i should not erase the nand_boot=0 ?
typongtv said:
so i should not erase the nand_boot=0 ?
Click to expand...
Click to collapse
That's correct. You can take the line I earlier mentioned and only change android and replace the line in you're startup
Sent from HD2
I tried it all, i tried carefully and i even tried the multi loader app....i tried with many different roms....
Not working......
maybe this is the one thing my HD2 won't do
Anyone had the same problem ?
still wondering why is it not working with me .....!
typongtv said:
still wondering why is it not working with me .....!
Click to expand...
Click to collapse
You can try the next thing. Rename your startup.txt. Make a new startup.txt fill this txt with the next things
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=AndroidMdeejayDHD nand_boot=0"
boot
Rename youre android folder to AndroidMdeejayDHD. Maybe space are not allowed
If this work you can edit the name AndroidMdeejayDHD to another version of android. Als o make that folder that name
henv said:
You can try the next thing. Rename your startup.txt. Make a new startup.txt fill this txt with the next things
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set initrd_offset 0x00a00000
set KERNEL zImage
set initrd initrd.gz
set cmdline "rel_path=AndroidMdeejayDHD nand_boot=0"
boot
Rename youre android folder to AndroidMdeejayDHD. Maybe space are not allowed
If this work you can edit the name AndroidMdeejayDHD to another version of android. Als o make that folder that name
Click to expand...
Click to collapse
Thanx henv...I'll try that.
Hi Guys,
I hope you can help me on this one..
I am trying to install on SD Isaiah12345 CM7 Honeycomb ROM on this link:
http://forum.xda-developers.com/showthread.php?t=1069771
I copied the ROOTFS and Startup.txt from SD Folder to the honeycomb folder.
Click CLRCAD then HARET, it boots up but stock in green HTC LOGO.
I do have a previous Android folder which i am using however since the startup.txt is directed to honeycomb folder i think should be no issue.
set mtype 2524
set ramaddr 0x11800000
set ramsize 0x1e400000
set KERNEL zImage
set initrd initrd.gz
set initrd_offset 0x00a00000
set cmdline "rel_path=honeycomb gps_zone=us nand_boot=0"
boot
please advise thanks..
you must copy the whole honeycomb folder to your sd. then you will not face any problem,i think
solved already thanks..
Berge, what was the fix?