Database Users

AT&T A.30.07 ROM and Volume on phone

So, I'm experiencing what everybody else is with this ROM. That initial volume level starts out soft and gradually increases to the max that I have it set to. Some have stated they like this and that's fine. But, I HATE it :evil: . I can never hear my phone ring anymore if it's in my pocket. Has anybody found a possible registry key or setting somewhere to turn this off?
And if any AT&T folks are listening.. I'd like a setting in the volume area to turn this off or on.

Phone Profile
Have you check under phone profiles... Ascending Ring change to Standard Ring
Dustoff

I don't have a phone profile, or i should say i don't see any where for that option. In the phone settings area the Ring Type is set for Ring. There is an option for "Increasing Ring" but that's even worse than it is already. I don't think this is what I'm looking for.

Since the WM2003 upgrade on my SX56, 've noticed issues with the speakerphone volume. I can barely hear it in fact. Any thoughts on this one?

Fiddled around with the volume setting, moved it up and down, and the now the volume issue seems resolved. Can't say for sure if that's what resolved it, but it's fine now.

I'm experiencing the same problem with the AT&T rom.. I'm going to take a look around in the registry later on... before I go installing any apps

Well I have taken a look @ the processes running and can't see anything obvious that would be doing the volume thing..
So I have had a poke about in the registry and have found a section with sound profiles and it has an attenuation property, I have tried adjusting this, and deleting it but still no good
Also there is an entry in the registry called Hack and mentioned Vol in the string... but it didn't make any difference when I deleted that either :roll:
If anyone thats a bit more acomplished than myself with the PPC Phone could take a look and find a solution to this, i'm sure many users would appreciated it

Has anyone figured out how to make the volume level constant yet?

Any solutions to get the volume working well on A.30.09 ENG yet?

Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.

valheru said:
Nope. I just put my phone volume on next to the top setting and the system volume two levels below it. Works fine then. As long as the system volume is two levels below it will not graduate the sound.
Click to expand...
Click to collapse
Another thing try ur Reminder set an Alarm you'll notice that you cannot change the Alarm1 ringtone thus the sound stays low ..I tried many things in the registry and no luck as well I wish would some1 help us to resolve this Issue, but!! I made contacts with att's support ,I told them about this problem thus I'm not the only one who's experiencing this, lots of ppl sees this ennoying , I hope they would help here...

Low Speaker Volume

Is there a way (registry hack, any other program) to increase the volume of the speaker during the phone conversation? I also own a Hermes and the speaker volume of the Trinity is so low compared to it that I can sometimes barely hear the other party. Any help?

onurd said:
Is there a way (registry hack, any other program) to increase the volume of the speaker during the phone conversation? I also own a Hermes and the speaker volume of the Trinity is so low compared to it that I can sometimes barely hear the other party. Any help?
Click to expand...
Click to collapse
Are you aware that turning the wheel on the left side you can change the volume while in a phone call?

anonimo said:
Are you aware that turning the wheel on the left side you can change the volume while in a phone call?
Click to expand...
Click to collapse
I have the exact same problem. When I am in a public place and when there is some noise around, I hardly hear the person I am speaking to. Even when I turn the wheel on the left to maximum
I have spent a lot of time looking for a solution but I have just seen that for some qtek devices, there is the key [HKEY_LOCAL_MACHINE\SOFTWARE\HTC\AUDIOGAIN] with values EARPHONE_UPLINK_VOLUME and RECEIVE_UPLINK_VOLUME, that allow to modify the max output level of the speaker. But I didn't find that key in the trinity

Even if I turn the scroll wheel all the way up, the volume is too low.
The audiogain registry key (although it doesn't exist in trinity's registry) is actually to improve the sound quality of the microphone and not the volume of the phone.
When I first make a call, when I hear the first ring, it is actually louder but then from the second ring on, the volume decreases at least by 25%.
Anybody with any ideas?

anyone figured how to increase call volume yet?

I would also appreciate a solution to improve the Speakerphone volume.

I would appreciate any fix to increase the volume of anything!
The included stereo headphones are completely useless! My god, why did they even put a volume dial on the headphones? I can barely hear anything with this crap phone...
A pity considering every other features works just perfectly.

ive got the same problem, before the bass fix, the volume was high but with a really unstable and bad sound... after the fix, there is kind of better sound but in phone calls the volume is low.. i really start hating this device......

I've been using my new p3600 for two weeks now, and this low speaker volume issue is killing me. I've been a Noia user for years, and the difference in sound quality during normal calls is simply unacceptable. The p3600 has so many awesome capabilities for such a small phone, but when it comes to the most basic function, I'm quite disappointed with.
I would also appreciate a fix to improve the quality of the speaker.
Cheers

i can say that this is not the only problem, there are so many others that i stopped thinking of this one... im going for a final hard reset now.. im really tired...im sick of it.....

Someone has an idea ?

Has anyone found away to increase the incall volume yet ???

Someone posted this registry hack elsewhere (use at your own risk of course)
1. HKEY_CURRENT_USER
2. ControlPanel
3. SoundCategories
4. InCall
5. InitVol
6. Change the DWORD value to 6 (Default = 2)
7. Click Done
Wait approx 10-15 seconds before testing.
PS. If the registry key or value doesn't exist, you can always try creating it.

Has anyone tried this??
What was the outcome??

ausi said:
Has anyone tried this??
What was the outcome??
Click to expand...
Click to collapse
Yes i tried it and it never worked for me ...

i can also confirm that this does NOT work on the trinity, anyone else have any bright ideas...

Ah ha...
I just bought Dopod D810(HTC Trinity) for my wife yesterday, and just now she complained to me about this "low on call volume" to me. And since I'm the one recommended her the phone I have to responsible. LoL.
But despite this problem, all of other features are flawless, complete, with excellent case design. Kudos to HTC!!
Btw, this is kind of dejavu for me since it also happened on my Eten M600 back then. This issue can only be solved on driver level, i.e: patch the RILgsm.dll, or include this patched driver in newly cooked ROM.
On which, I don't have the necessary skills to do that... -sigh-
Any expert users can help us???

schizo said:
Ah ha...
I just bought Dopod D810(HTC Trinity) for my wife yesterday, and just now she complained to me about this "low on call volume" to me. And since I'm the one recommended her the phone I have to responsible. LoL.
But despite this problem, all of other features are flawless, complete, with excellent case design. Kudos to HTC!!
Btw, this is kind of dejavu for me since it also happened on my Eten M600 back then. This issue can only be solved on driver level, i.e: patch the RILgsm.dll, or include this patched driver in newly cooked ROM.
On which, I don't have the necessary skills to do that... -sigh-
Any expert users can help us???
Click to expand...
Click to collapse
hi this link doenst work "include this patched driver in newly cooked ROM"

zohaer21 said:
hi this link doenst work "include this patched driver in newly cooked ROM"
Click to expand...
Click to collapse
Sorry zohaer... my post does not contain hyperlink.
I just underlined it to stress up some points...

push!
also need a solution

Ringtone Volume issue - 2% and still 'LOUD'

Hi all,
This is an issue which has been semi bugging me since getting my Touch HD a few months ago.
If I use Touchflo and go into settings for the ring volume, I put the slider right down to '2%'. When a call comes in, it's still very loud indeed.
I've tested so that if I put the volume up to say 80% and call in again, its VERY very loud!
I want it that I can leave my ringer on say 5% or 10% when I'm working so that I can hear the ring tone but not disturb other's who maybe close by.
Also, upon testing, if I change the ring tone type, then when it 'preview plays' the ringtone its nice and quiet, kind of at the level I'd like it to ring. However, when then selecting the ringtone and clicking done, I test with an incoming call and it's much louder.
Am I missing something here? I've never had this issue with any of my previous Xda's/HTC phones.
I had a look in search but nothing seems to show up like this from other posters - could my handset be faulty?
Or, do I need to buy some software which controls this better and offers more profiles than just the 4 standard ones?
Any ideas out there please?!
Cheers! Dennis, West London UK!

I think the volume setting goes by an incremental of 20%. Yeah, at the lowest 20%, it is still quite loud. The default Innovation ring is excessive loud. You can try another one which is not as disturbing at 20% setting

Hi there,
Thanks for the response!
Yes, I had the 'innovation' ringtone set and have now changed it to generic 3 which is 'better' !
Is there any software out there specifically for ringtone generation? maybe I could create ringtones and record them at a 'lower recording level' to acheive a 'low' sounding ringtone on the THD without this 'limitation' I pointed out/experience?
having done a search, I can't quite beleive I'm the only one who seems to have noticed this!
Might have to find those 'funny' ringtones - the Brad Pitt Snatch dialogue " why the **** would i wanna caravan with no ****ing wheels' being my favourite !
Cheers! Dennis! West London UK!

Your not the only one who has this problem. There is a other thread about the music player and the volume there, but the whole TF3D volume is just way too high . Annoys me aswell

In Call Volume Too Loud -Even With Volume at Min!!

Please, please help guys.
My HD2 is ear-piercingly loud during a call even when i turn the volume down to a min.
I have searched the forum but cant find a definitive answer to lower the volume even further....there must be a work-around!
When i am at work, nearly the whole office can hear the other person talking to me, it's quite embarrassing.
Any help would be greatly appreciated.
Thanks

Its a known bug, several people have contacted HTC about this.
They have said they are going to release a hotfix for it, quite as to when and if they even are is another thing.

oh ok then.
i take it, there will be info posted on this forum when/if something has been released?

If you are talking about the same problem I have, there is a temporary solution.
What I find is that when I am dialling, the volume is terribly loud. However if I press the volume up one notch, then down - it goes to the correct volume.
Seems there is a default minimum that overrides the user defined level, but once you alter the user defined level, it takes notice.
Odd, but works for me.

I have never had this issue, but I use Volumex (http://volumex.jdbp.mobi). Gives me a better control of it. Give it a try

[Q] Haptic feedback clicking

Hello there everyone,
is anyone else experiencing this weird phenomenon:
everytime haptic feedback frequency is high, e.g. while fast typing messages, I'm hearing besides the vibrating buzz also some clicks, and they become louder the shorter the intervals between the pulses. When I wait a little after hearing it and touch a key again, the clicking is gone but as soon as they follow up each other a little bit faster it's hearable again.. Can anyone check if this happens with them too? I can't remember I was hearing this sound too when I first used the phone, just wanted to know if something's wrong in the earpiece. I know the vibrator is situated at the bottom of the phone, the noise however is coming from the earpiece.
Thanks in advance!

pieternoyens said:
Hello there everyone,
is anyone else experiencing this weird phenomenon:
everytime haptic feedback frequency is high, e.g. while fast typing messages, I'm hearing besides the vibrating buzz also some clicks, and they become louder the shorter the intervals between the pulses. When I wait a little after hearing it and touch a key again, the clicking is gone but as soon as they follow up each other a little bit faster it's hearable again.. Can anyone check if this happens with them too? I can't remember I was hearing this sound too when I first used the phone, just wanted to know if something's wrong in the earpiece. I know the vibrator is situated at the bottom of the phone, the noise however is coming from the earpiece.
Thanks in advance!
Click to expand...
Click to collapse
do you also have sound on keypress turned on?

No worries my nexus does the same.
Sent from my Nexus 4 with Paranoid Android

korgmotif said:
do you also have sound on keypress turned on?
Click to expand...
Click to collapse
No I haven't also, the phone is completely set to mute. But if the guy of the second answer doesn't have his touch sounds on neither, everything's OK with me just wanted to know if it was abnormal
Thanks!