Database Users

Video playback problems

I have been experimenting with video playback on the Tytyn, but am becoming disillusioned with the results!
I use PocketDivX Encoder 0.3.60, to convert using 2 pass xvid and b frames, and TCPMP, and the results were truly stunning on my old Kjam.
Whatever I try with the new Tytyn, does not even come close to the performance I was getting on my old device.
Does any one have any suggestions or recommend a successful encoding method that actually works on the Tytyn. I would like to hear from anyone who has managed to get a playback quality the same as the Kjam/Wizard i.e smooth video without loss of lipsync or jerky framerate.
Thanks

search for TYTN + TCPMP on this forum... this has been discussed A LOT.

pergolesi said:
I have been experimenting with video playback on the Tytyn, but am becoming disillusioned with the results!
I use PocketDivX Encoder 0.3.60, to convert using 2 pass xvid and b frames, and TCPMP, and the results were truly stunning on my old Kjam.
Whatever I try with the new Tytyn, does not even come close to the performance I was getting on my old device.
Does any one have any suggestions or recommend a successful encoding method that actually works on the Tytyn. I would like to hear from anyone who has managed to get a playback quality the same as the Kjam/Wizard i.e smooth video without loss of lipsync or jerky framerate.
Thanks
Click to expand...
Click to collapse
Hi there & welcome to our videoplayback problem:
http://forum.xda-developers.com/viewtopic.php?p=354421#354421
It's not all bad, but I can't find any workaround for the meantime. Look out for The CorePlayer (The new TCPMP), hopefully when released, it will address these issues we have discovered. Meantime I am using 'ImToo_DVD 2 Ipod Converter' , which converts to high quality Mp4 format and plays back just fine for now and is definately on par with Divx/Xvid AVI encoding at 768kbps! It also converts a whole film in practically 20 mins plus compared to PocketDivx_Encoder or DVDx.

I have tried the Im too to ipod converter, and have had some very pleasing results.
Could you possibly let me know what settings you have checked/unchecked in TCPMP, for optimum playback of the resulting mp4 files?
Thank you very much, your help and advice is greatly appreciated.
Best regards
Pergolesi

yeah I had a good experience converting to mpeg4 except the filesize was much larger (almost twice the size as divx) is this the norm cause of divx compression?

MPEG4 Videos in TCPMP
Personally, I use the following settings for ImTOO DVD to iPod Converter:
Video Bit rate:512 or 768 (difference is negligable but size is better @ 512kbps)
Audio Bit Rate:64
Sample rate:22050
Channels:2
Video Size:320x240
Profile: iPod MPEG-4 Movie (*.mp4)
Zoom:Full (keep aspect ratio)
Split:Infinite (though it's nice to have a DVD encoded in the chapters it came in - TCPMP will play them in the correct order if saved as 'playlist')
**Do Check the Audio settings (under the Menu bar) as your DVD will probably have options for differnt Audio i.e English.
I know more settings are available, but this is a short-term fix for me (with acceptable results for me) until the new 'CorePlayer' is released.
In TCPMP the settings really don't make much of a difference either, but just make sure you have 'Video' set to 'Rawframebuffer' mode. I have found that all AVI and MP4 playback without major gripes, but the MP4 gets better results whilst benchmarking using 'ATI decoder'. Fat load of good that does you when it comes to playback though (back to rawframebuffer mode).
P.S. for smaller filesizes, just reduce the video bit rate like you would in AVI encoding.

MPEG4 Videos in TCPMP
Great info, I'm sure others will find this just as helpful as I have.
Thanks again.
Pergolesi

In TCMP what is the best setting, GDI or RAWFRAMEBUFFER?
Im asking this because on my tytn i can use both of them without problems.

ruirocha said:
In TCMP what is the best setting, GDI or RAWFRAMEBUFFER?
Im asking this because on my tytn i can use both of them without problems.
Click to expand...
Click to collapse
I use Rawframeuffer mode, but GDI will do also. Though benchmarking yields better results in Rawframebuffer mode for me.

I'm using TCPMP. I set ATI IMAGEON Decoder on.
When it start, the screen is not viewable.
But I press the action button, when the movie plays it is normal.
When I paused and resume, video play with low frame rate.
I goto Option, Speed, Select 100%, it's normal.

Help with videos

Hi, i got myself a quick 2gig memory card today and want to put some of my movies on it, i have 2 questions
What is a decent converter that i can use?
What settings would run on Universal smooth?
Thanks all

Normally works without converted it, in ac format 1,5Gb of movie it will be played smoothly, if not try google to find some converter bc right now i can´t remember any.
hope this help
regards

thanks a million, some tweaking to the player and im fixed
thanks again mate

what you said works, but i have no quality and it keeps sticking my video, any ideas why?

I went through the various options for this a few months ago. In TCPMP, set the following for best performance:
In Video:
Smooth video (only 50%)
Quality: Normal
Video driver: Intel XScale
In Settings - DirectDraw
Overlay with colorkey
In Settings - Intel XScale
Everything selected
Leave all other video settings off or at the default settings.
Unfortunately, the universal can't manage any video (XviD, MP4 or WMV) I've tried at the native resolution of 640x480 without some serious frame skipping. But it seems to cope well with videos I've encoded for my Archos, which are XviD or DivX, 320x240, and are encoded at 1000 kbps or less. You can use B-Frames (they don't take much processing power and give a significant performance increase), but don't use GMC or Q-Pel.
As for converters/encoders, take your pick. There are loads. Dr DivX is pretty simple to use, but IIRC isn't available any more. Your best bet is to follow one of the guides at doom9.org.

thanks, its ashame my mp cant read it because i prefer the interface on windows media player then core media player aswel as my playlists, thanks again, hope some update for the codecs or something comes out soon

Why not try Windows Media Encoder if you are just converting from one format to another (don't know if you can rip DVD, never tried). The built in profiles are good enough for the Uni's screen. To rip from DVD I use IMTOO dvd ripper. Just create a profile as listed above and away you go.....Good luck,Pug

TCPMP+PocketDivxEncoder (http://divx.ppccool.com) ... for the best results!

yarser said:
TCPMP+PocketDivxEncoder (http://divx.ppccool.com) ... for the best results!
Click to expand...
Click to collapse
Is it better than DrDivx? I have had some good success with DrDivx. The problem is that it wastes some space for the widescreen formats and I would prefer to use every single pixel available. Is there a setting in DrDivx that reformats the movie to fit exactly in the Tornado screen?

I use
Fox Video Converter. Virtually any format with any setting and you can adjust any of the settings to suit yourself. Generally a 700Mb Divx converts into a roughtly 250-300Mb WMV or ASF or whatever you want. Then TCPMP.

Smooth video viewing possible? (h2.64)

Heya folks, i am wondering if it is possible on TCPMP to view a hi res video smoothly, i first got the H2.64 format invalid error but shortly after fixed that with the TCPMP ffmpeg addon but now the video i want to watch doesnt run smoothly,
anyone have any ideas how to set it up and if so if they are willing to provide the presets
Cheers everyone
exemike
Sorry title error, i meant to say H.264 =)

OK
MAKE AN OVERCLOCK! TO 260MHZ With Batterystatus or Omapclockplus

i dont think that will work, i tried a h.264 video on my exe aswell and it was just as slow.
maybe i need to convert the video

exemike said:
maybe i need to convert the video
Click to expand...
Click to collapse
That's exactly what you should do.
I use a nice freeware conversion tool for WinXP called SUPER, which converts videos to a specific compression of AVI that's optimized for Pocket PC. Just select "AVI (for Pocket PC)" as the output container, and bob's your uncle. Works great: is formatted to fit the screen correctly, and goes into full screen mode flawlessly. You can even strip the audio tracks from strictly visual media (your p*rn, for example...)
Now, sure, you're going to lose some resolution, but you had to know that was going to happen anyways viewing it on a 320x240px screen, right?
Download SUPER

YES
Myrddin Wyllt said:
That's exactly what you should do.
I use a nice freeware conversion tool for WinXP called SUPER, which converts videos to a specific compression of AVI that's optimized for Pocket PC. Just select "AVI (for Pocket PC)" as the output container, and bob's your uncle. Works great: is formatted to fit the screen correctly, and goes into full screen mode flawlessly. You can even strip the audio tracks from strictly visual media (your p*rn, for example...)
Now, sure, you're going to lose some resolution, but you had to know that was going to happen anyways viewing it on a 320x240px screen, right?
Download SUPER
Click to expand...
Click to collapse
Yep the super converter is SUUUUPER!!!! i use it too... and can recomend to you the AVI format our devices can view smothly without overclock a video at lest 230 mbps.

thank you very much guys, I really am enjoying this wizard very much and having it play videos just makes it so much better
now I just have to read the big book on how to upgrade to wm6
thanks again guys,
exemike

Youre welcome men
Be sure to read evrything!!!! and ask somuch more ok?
Its our pleassure to give you the needed info about what you will do.

hehe thanks q will bear that in mind and be sure that I will have lots of questions, after all like I said for a device growing in age it really is brilliant.

The Guide
Well people you have all read the threads so i thought i would translate everything to one simple guide.
First of all, this should hopefully work for most Htc's out there (from what i've read and understand anyway)
Second First of all
You should download the program (Freeware) TCPMP, which can be downloaded at the provided link.
http://picard.exceed.hu/tcpmp/
Personally i downloaded the 0.72RC1 but any of the versions should work farely well.
Secondly you should take the time to download some of the additional plugins for the player, commonly for the program we will be using, the ffmpeg plugin i think is suggested but also the avc and aac video and audio codecs from another site i have provided.
Aditional Plugins
http://picard.exceed.hu/tcpmp/test/
This is the AVC and AAC codecs, commonly used for H.264 videos, although the wizard struggles with really high quality videos sometimes may be worth overclocking to get the performance you want
http://www.box.net/public/gk97uv7x1o
Addons worth having for sure though
Next you will need to download a program, yes another magnificent piece of freeware known as Super
http://www.erightsoft.info/GetFile.php?SUPERsetup.exe
When the installation is complete, run it, install it, and open it up, from there
When you run the program for the first time, one main menu will setup, the base of the program, now im sure on first sight its like lots of new buttons to press, well its not really that, all you need to do is set where you see (1) and the formats for the output container, just selec avi for Pocket pc, immediately, pocket pc res and settings are loaded.
The settings i am using for my MDA Vario (HTC Wizard) are 320:240 video scale, 4:3 aspect, 25fps, a bitrate of 128 and hi quality + 48k audio for the video options,
for audio i am using a frequency of 22050, 2 channel, 48kbps bitrate and default dvd language select.
further towards the bottom of super you will see what looks to be an input box, anywhere within the white area right click and select add media, add your video (any video you like) and hit ok, the file should input itself, and there should be a checkbox under the active colum, tick it and then further down the program hit encode, wallah, your video should encode perfectly for your wizard, heck you can try other presets to differ your performance.
Open the vid in TCPMP and it should happily play.
For youtube videos etc, there are altho online + downloadable programs to convert to different programs for youtube directly.
http://www.vixy.net/
This is the program with the installable converter, it is freeware but expires every so many months, but its always put back up for download again, dont know why they do that really but it is a good program.
Another program which is reliable online and has lots of options is
http://mediaconverter.org/
Hope this guide helps newcommers someone.
Thanks to Q and Myrd for the information =)

Sweet
I use Lathe 1.5, been using it for almost 2yrs
Works great

exemike said:
The settings i am using for my MDA Vario (HTC Wizard) are 320:240 video scale, 4:3 aspect, 25fps, a bitrate of 128 and hi quality + 48k audio for the video options,
for audio i am using a frequency of 22050, 2 channel, 48kbps bitrate and default dvd language select.
Click to expand...
Click to collapse
One more thing would help me pretty much. Could you add which video (h.264 / h.263 / h.262 / xvid / mpeg4 / msmpeg4 / ...) and audio (mp3 / aac / wma / ...) codecs you're using?

Coreplayer 1.3.6 Judder - stock ROM 1.48 (SOLVED)

I've done a search and read many posts about coreplayer performance on the HD2. Most have no problems but some do and i'm one of them.
I have no problem playing the files using these settings from member Shasarak (thanks mate):
Options/Video and activate Dither, then "smooth zoom always" rather than "smooth zoom 50%". You will get substantially better performance if you then go into the DirectDraw settings page, choose "YUY2" as your overlay format, leave "use device stretching" checked, and uncheck the other two boxes.
I have tried all other settings and combinations but i agree the above gives the best performance.
However, i am still experiencing occassional judder and it's annoying me.
1). would upgrading to stock ROM 1.66 make a difference?
2). is there ANYTHING else i can do to stop the judder? i've already tried disabling background tasks, wifi etc
3). The audio is also very slightly out of sync, it's delayed, it's minor but i notice it. It happens on all videos, they are all .avi I've not seen anyone complain of this before.
Thanks

With regards to uadio sync:
Menu --> Tools --> Settings
Select the 'Advanced' page
Manual A/V offset let's you adjust the audio sync

The judder is most likely due to the format the videos are encoded in just eating too much CPU. How do you encode them?

kilrah said:
The judder is most likely due to the format the videos are encoded in just eating too much CPU. How do you encode them?
Click to expand...
Click to collapse
I don't encode them, just downloaded movies in the common divx/xvid format. I played movies on my old N96but re-encoded them to mp4 as it didn't play avi and i never tried coreplayer on it.
Perhaps i should try re-encoding, but don't see why this phone couldn't handle a standard 700mb divx avi.

kr00t0n said:
With regards to uadio sync:
Menu --> Tools --> Settings
Select the 'Advanced' page
Manual A/V offset let's you adjust the audio sync
Click to expand...
Click to collapse
cheers mate, you are the man! putting a -0.300 has made it much better, not sure why it would be out like that on all movies? I'm very happy with that What do the other 2 settings do - soft drop tolerance & hard drop tolerance?
now just to fix the juddering.
I've found, and i think someone else suggested this in another thread, that if you pause it for a moment it sorts itself out. Would rather not have to do that but i don't see a way around it

jonbaker76 said:
Perhaps i should try re-encoding, but don't see why this phone couldn't handle a standard 700mb divx avi.
Click to expand...
Click to collapse
The standard ~1h30 700MB divx movies I've tried to play all worked nicely. But sorter ones of the same size (meaning more bitrate) could start being too much load. Just try and do a benchmark in coreplayer with a video that causes problems, if you have less than about 150% average playing speed you might start getting drops.

It may help to put the phone in "Airplane Mode"; if it's checking for email messages in the background while playing it will judder like crazy. Use the task manager to kill off any other running applications as well....

I come to the conclusion that this phone just can not handle playing divx/xvid in avi very well, and i'm not sure why it can't.
I have gone back to my old ways of converting the video to mp4 using winavi mp4 converter, this also cures the problem of any files that have ac3 audio as it converts that as well.
On my 8 year old computer it would take 30 mins to convert a 700mb film, i have since bought a quad core Dell running 64 bit windows 7 and it converts in less than 10 mins!!
Smooth as butter now but a shame i have to go back to doing this. But at least the files will play in coreplayer, windows media and htc's player so plenty of choice
If anyone wants the settings i use for winavi mp4 converter then just ask away. It's not free but mine was if you get what i mean
EDIT:
I HAVE FOUND THE REAL PROBLEM, IT'S MY COREPLAYER! IT STARTED STUTTERING THE MP4 FILE THIS MORNING, WHEN I SWITCHED TO WINDOWS MEDIA OR HTC PLAYER IT WAS FINE 9OBVIOUSLY COULDN'T DO THIS BEFORE AS NEITHER OF THOSE PLAYERS SUPPORT AVI)
I JUST TRIED COREPLAYER AGAIN AND IT'S PLAYINNG THE SAME MP4 FILE FINE NOW, MUST BE SOMETHING WRONG WITH MY COREPLAYER, WILL GET ANOTHER VERSION.
WHAT A DRAMA AND SORRY FOR BORING YOU ALL WITH IT LOL

Video playback problems - Coreplayer, TCPMP : SOLVED/SOLUTION

PROBLEM SOLVED - CONCLUSION OF THREAD updated 9/3/10:
1). Coreplayer and TCPMP don't work well on my device when playing back avi (divx/xvid) because they don't support hardware accelaration, although others seem to have no problems which still confuses me. Playback is juddery dropping many frames. I have tried Shasaraks settings (which are the best) and all others with no luck.
2). Because WMP and the HTC player don't support avi (divx/xvid) converting to mp4 is the only option for me.
3). CONVERSION: I have tried many converters including: TMPGEnc.XPress, handbrake, xvid4psp, mediacoder and others. The ones that do work well for the HD2 all have the same problem and that is a delay in audio putting speech out of sync when played back on the device. Even when playing back avi's in coreplayer i had to manualy adjust the sync.
The only converter that works well and is fast and can put the audio in sync for playback on HD2 is winmenc available here (freeware) http://winmenc.blogspot.com/
Download my profile which has the audio sync tweak already in it (thanks to Kr00ton) and put it into the profiles folder. I have tweaked Kenkiller's original profile, see here for info: http://forum.xda-developers.com/show...7&postcount=38
I have changed Kenkillers profile from 2000 to 1000 kbps to save file size and have also got rid off the 2 pass encoding to save time (and lots of it!). You also need to tick FIT TO WIDTH AND SPEED & QUALITY CONTROL AND MOVE IT TO FASTEST. I done various tests and found no noticeble difference to SD videos doing it my way. This speeds up conversion time to around 30 mins for a 700mb avi and keeps the file size about the same as the original.
If you have more time on your hands and or you are converting HD then maybe use Kenkillers original profile, although i converted HD stuff in my profile and it looked great. It all depends if file size and conversion time is an issue for you.
4). For some reason the HTC player still judders for me, i'm pretty sure it didn't do that in stock rom 1.44 but it certainly does on my 1.66 ROM leaving only WMP that performs perfectly It's a shame that it isn't very finger friendly for srolling through the video etc but i'll live with that.
I can only report my findings and experiences, you may not have the same issues i have had. Conversion may wield different reults on other OS's. I'm using windows 7 64 bit and can confirm that when i used winavimp4 converter on xp it was perfect but used on windows 7 it puts audio out of sync. Having said that it is without a doubt the fastest converter i have come accross converting a 700mb file in around 10 mins on windows 7 64 bit. It was around 30 mins on my old xp machine.
5). I can now relax and enjoy my films on my HD2, which is the main reason i bought it!
ORIGINAL 1ST POST
I bought this phone because of its screen. I watch movies on my long journeys to work and i'm getting increasingly frustrated with the phones poor performance on playback.
Coreplayer judders with many dropped frames no matter what settings (tried shasaraks direct draw settings) or version of coreplayer i use and disabling sense and using plane mode makes no difference whatsoever. It will play flawlessly for a while then judder then be ok then judder on and on...
So i decided to convert to mp4:
coreplayer still has poor performance. HTC player was ok but since upgrading to 1.66 it's performing worse than coreplayer now (yes, i did a hard reset after flashing)
The only player that works is wmp. I now have some questions:
1). Is there an option in wmp to sync the audio manualy like in coreplayer? some films are slightly out of sync.
2). are there any other players that work well on the HD2 apart from tcpmp (tried that, same results as coreplayer)
3). CONVERSION:
What are the best settings for video conversion for the HD2? If I can't use coreplayer to play avi this is my only solution and aslo solves the problem of coreplayer not supporting ac3 audio. I'm talking bitrate etc for video and audio. If you are succesfully converting video what converter and settings do you use? PLEASE!
I tried searching but couldn't see a thread dedicated to optimum conversion settings for the HD2.
4). Could the problem lie with my 16gb sandisk sd card? i noticed another thread for the blackstone where a cab was designed to speed up the cards performance by 3 times, is there something like this for the HD2 and would me formatting it to fat 32 make any difference at all to my problem?
This is really winding me up now and i've spent hours messing with settings etc, the one function i really need and it wont perform which i find very surprising for a phone that has this super fast snapdragon processor.
PLEASE HELP ME
END OF ORIGINAL POST, PROFILE FOR WINMENC BELOW

1) no
2) none even close to that
3) can't tell, as I don't really do it much, coreplayer works well for me
4) could be, as coreplayer works well for me.

jonbaker76 said:
4). Could the problem lie with my 16gb sandisk sd card? i noticed another thread for the blackstone where a cab was designed to speed up the cards performance by 3 times, is there something like this for the HD2 and would me formatting it to fat 32 make any difference at all to my problem?
This is really winding me up now and i've spent hours messing with settings etc, the one function i really need and it wont perform which i find very surprising for a phone that has this super fast snapdragon processor.
PLEASE HELP ME
many thanks...
Click to expand...
Click to collapse
Could well be the card, as it sounds like it gets to the end of a buffer, buffers, then continues, causing the lags.

I know that reporting my own experience is of relatively low usefullness to you as it's not step by step instructions on how to solve your problem, anyway:
1) I use TCPMP to watch AC3 audio-encoded series like frasier
2) I use Coreplayer to watch non AC3 encoded series like sex and the city
3) tcpmp is slower than coreplayer for those videos that coreplayer CAN play, I get ~120% bench for SATC in coreplayer and ~90% in tcpmp, but nonetheless I can watch everything (...that I tried until now) in tcpmp without noticing the slightest issues, and I always "zoom to fit screen", which means the video fills the entire 800x480 resolution
4) I watched videos on my old ipaq 214 as well, sure we're talking about a different device, but we're aso talking about a device with a 600MHz cpu and without an accelerated graphics subsystem (and I do have chainfire patch for the graphics subsystme of my hd2)... well I only used tcpmp on the 214 and no issue there... and I watched the whole Death note series, crappy bench results but no issues with jumps in the video
5) I have a 16gb class 2 sandisk microsd, and despite it being class 2, I get ~7mb/s transfers both ways in the sd reader of my laptop, so if we're using the same memory card, that should not be the problem...
6) probably you watch "heavy" encoded movies?

Look at this:
http://forum.xda-developers.com/showpost.php?p=5331497&postcount=38
Post Nr. 38 and download th profiles.
Use Winmenc 0.81 Beta (Freeware). Copy the downloaded profiles into Winmenc subfolder "profile".
Edit the profile like told in this thread
http://forum.xda-developers.com/showthread.php?p=5341496#post5341496 Post Nr. 32 from krooton.
Important ist to set the audiodelay.
With this solution you can get very good *.mp4 Files with audio in sync playable with Manila album or Mediaplayer.
I tried a lot of things but this was the only way to get good video with audio in sync.
Sorry, but english is not my first language.

For coreplayer i'm using v 1.3.5 build 7340 but the newer 1.3.6 build 7427 also performs the same.
What version are you guys using?
Failing that i'll format the card to fat32 to see if that makes a difference and have a look at that winmenc.
Any other suggestions are very welcome

ephestione said:
6) probably you watch "heavy" encoded movies?
Click to expand...
Click to collapse
defo not this. I converted a film to the lowest spec audio and video wise and it resulted in 350mb file... It played the same as the 1.2g original!

I used handbreak to convert to MP4 and then used the built in player in sense.
Seemed to be HW accelerated as 45minutes of playback took about 8% of the battery charge and I would expect doing soft decode of H264 would take more than that.
Only downside was waiting 15minutes to go from 720p to iPhone profile in handbreak. I am going to experiment with remuxing
Jim

I have created a preset in handbrake specifically for the HD2 - Let me get home and post it back for you.
have been using this - converted about 20 movies and loaded up around 10 on the HD2 for a trip. All of them played perfectly in HTC album (Looks like it's hardware accelerated). Approx 4-5 hours on a single full charge (around 2 1/2 movies back to back).
Best part - converstion takes about an hour on a 4 yr old laptop - should happen much quicker on new ones.
Source files are all mkv (for Blu-ray rips) or iso (for standard DVD)

vivek310 said:
I have created a preset in handbrake specifically for the HD2 - Let me get home and post it back for you.
have been using this - converted about 20 movies and loaded up around 10 on the HD2 for a trip. All of them played perfectly in HTC album (Looks like it's hardware accelerated). Approx 4-5 hours on a single full charge (around 2 1/2 movies back to back).
Best part - converstion takes about an hour on a 4 yr old laptop - should happen much quicker on new ones.
Source files are all mkv (for Blu-ray rips) or iso (for standard DVD)
Click to expand...
Click to collapse
please do mate, looks like a nice converter, if you post the sttings you are using i'll give it a bash tonight.
I don't know what is going on with coreplayer, i used it a while ago and it played lovely, about 2 drops in 10 mins. I just tried again, 11 drops in 10 seconds what does this tell us!?!?!?!?

Could also be that you have something running in the background that's using the CPU badly...

This thread is worth checking out for video settings: http://forum.xda-developers.com/showthread.php?t=582122
A converter that is reasonably idiot-proof (although its maximum bitrate is a teensy bit too low, IMO) is MP4ForHD, which you can find here: http://forum.xda-developers.com/showthread.php?t=478050 I think it lets you incorporate an audio delay into the video (thus negating the need to do it in the player).

I've bought Core PLayer and Kinoma PLay but the only one i use to play my videos and series is TCMP, its litter and complete doing its tasks.
I prefeer TCMP.

kilrah said:
Could also be that you have something running in the background that's using the CPU badly...
Click to expand...
Click to collapse
Is what i thought but no, everything is shut down. Does the same after a soft reset. Disabling sense and using plane mode also makes no difference.
But like i say, soemtimes it works and sometimes it drops like a mother f*****
it's completely random
what i will try is another sd card, i got the 2gig one indoors, i'll put the same vid on that and report back... all rather boring but it's doing my head in and i don't like being beaten

Shasarak said:
This thread is worth checking out for video settings: http://forum.xda-developers.com/showthread.php?t=582122
A converter that is reasonably idiot-proof (although its maximum bitrate is a teensy bit too low, IMO) is MP4ForHD, which you can find here: http://forum.xda-developers.com/showthread.php?t=478050 I think it lets you incorporate an audio delay into the video (thus negating the need to do it in the player).
Click to expand...
Click to collapse
thanks, will take a look

I just don't see the point in encoding especially for a mobile device.
That's iphone madness, not ours
I've been watching videos encoded for proper pc's since when I had my ipaq hx2400 back then, after that I kept doing it with my ipaq 214, and now I am happily doing the same on the HD2. I am sure there's something that's preventing jonbaker from watchgin movies normally, and using an alternate encoder is not a "solution" but a complication. Occam would say the same.
More specific info on file size/length/codec/bitrate/tcpmp-coreplayer bench results/microsd transfer rate (tested with read/write operation in usb disk mode) would be useful.

If memory card access is causing the problem with CorePlayer then you could try increasing the amount of memory CorePlayer uses to buffer. You could also try out these registry settings which sometimes improve SD card performance: http://forum.xda-developers.com/showpost.php?p=5547319&postcount=8

Shasarak said:
If memory card access is causing the problem with CorePlayer then you could try increasing the amount of memory CorePlayer uses to buffer. You could also try out these registry settings which sometimes improve SD card performance: http://forum.xda-developers.com/showpost.php?p=5547319&postcount=8
Click to expand...
Click to collapse
any chance you can suggest what i increase the settings to in the coreplayer memory buffer? not sure what im doing there! wouldnt mind giving that a go.

jonbaker76 said:
any chance you can suggest what i increase the settings to in the coreplayer memory buffer? not sure what im doing there! wouldnt mind giving that a go.
Click to expand...
Click to collapse
I'm operating entirely on guesswork, so no, no chance at all!!! I guess it needs to still be small enough that there is no danger of running out of memory on the phone, but larger than the default value. Might not make any difference, of course, depends on what's causing the bottleneck.
Have you tried getting CorePlayer to play video and audio in the background and then opening up the task manager to see what the CPU usage is doing? That might at least tell you whether it's a lack of processing power as opposed to something else.

Shasarak said:
Have you tried getting CorePlayer to play video and audio in the background and then opening up the task manager to see what the CPU usage is doing? That might at least tell you whether it's a lack of processing power as opposed to something else.
Click to expand...
Click to collapse
RIGHT i set coreplayer to play in background: BUILT IN TASK MANAGER:
mem - 7.94m CPU sitting around 45 - 65%, then will drop to around 20% then back up to 60%
RESCO TASK MANAGER:
mem - reports 2.68m
don't know why they give different results memory wise don't think resco task manger gives cpu usage
is all that normal?