Related
Hello one and all.
I have been looking at this forum for about 1 week and i'm still none the wiser. This may be because I have no idea what im doing and I am a little worried about making rom changes as I have no experinace of this.
I have a 02 exec. Which i am happy with but its a bit slower than I thought it would be. The phone seams to mess around when answering.
I have booted it up as normal on the basic setting.
A few questions that I have :-
What is the best setting to boot up on basic or corperate with the code ?
What reg changes are critical to boost performance ?
Any Software that I should get for the Xda ?
VGA settings do I need to change them ? What effect does it have.
Any advise would be good. If it could be given in a format my 2 year old could understand that would be good for me.
Thank you in advance
You'll find a wealth of information on each of your questions by browsing & searching the posts already on this forum.
thanks moandal that's why I posted.
1 post says basic setup another say corporate. 1 post says hack this that and the other. another says not to.
I'm new to pocket pc.
these forums do not make it clear what is best.
example radio version 1.06 or 1.08 at least 3 posts on here saying each one is better than the other. I have no idea.
all I was asking for is some guidance as to which set up has worked best for people.
@CRJL you've one up on me mate - I did not even know this thing had two modes!!!
BTW, why is that? Someone mentioned somewhere a corporate password - how to enter this & why would I want it.
BTW CRJL, I agree with you, these little devices are very confusing, espcially because the front end software (WM5) is soooooooo labourious!
Andy
when you hard reset the thing. after all the rom stuff loads up it gives you the choice of basic set up or corporate. it selects basic automatically after 20secs.
if you tell it corporate then you have to put the code 0506 in. this the uninstalls some stuff off the exec. you loose mms and all the gprs an 3g settings for conecting to the net. (i don't know what else it does) some of the people in the forums say it makes the exec faster. I could not really notice any difference.
you loose a few applications as well.
until I learn more I'm staying in basic.
I find these forums are for more advanced users so the simple questions tend to get missed. (im talking abot my first post) still not had a reply answering my questions
CRJL said:
What is the best setting to boot up on basic or corperate with the code ?
Click to expand...
Click to collapse
for this you should first make a hard reset (carefull, with hard reset you will loose all data!) by pressing both app buttons and reset at the same time.
When it starts up, after the installation countdown shows up you should make a reset to stop the automatic setup.
Now you have a machine, which is only basic setup. See how you like the things in there.
After you now enough about this, you can make same hard reset again and start the corporate setup. Then see, how you like this setup.
After this do same with basic setup.
In total you have then an idea, what you can have with the 3 different setups.
Now you can decide, which of the 3 setups you want to start with. After this, you should read the posts about Extended Rom, how to unlock it, which programs are in there etc. Then you get an idea for example how to install some software in the basic setup.
Also, you can add some programs from other Roms. For example I have an MDA Pro and I added the I-Mate Backgammon game to my setup.
Try out and see what customizations you want and need, which you do not want.
CRJL said:
What reg changes are critical to boost performance ?
Click to expand...
Click to collapse
Basically, this does not really make difference. Forget about reg changes. Performance depends on running programs and setup - see above.
As far as I know, o2 installs some app in the basic setup, which makes the device slow. As I never tried o2 rom, I do not know, if this is true.
CRJL said:
Any Software that I should get for the Xda ?
Click to expand...
Click to collapse
read here:
http://forum.xda-developers.com/viewtopic.php?t=31697
here also I recommend to try out the software and just keep the ones you like.
In total I would recommend you to create a directory on your PC where you put all the setup and cab files, which you want to have in your final setup. After trying out all, make a hard reset again and install the files from this directory. This prevents any junks to be left behind from your previous tries.
CRJL said:
VGA settings do I need to change them ? What effect does it have.
Click to expand...
Click to collapse
I think, you get more problems than it helps. Some programs appear too small on the screen. And when you make a Romupdate this does not work anymore.
I recommend not to install any VGA Patches. Instead just set the text size to more small and search in this forum for some registry hacks to change system font etc. and see if you like it, when the font is more small (this is good for Opera or PIE as you can view complete page!)
Nice reply, thanks mate!
erm
yes
ahem
erm
what are the ><ahem, ahem>< "app buttons"
Andy (thicky wicky Blacky wacky Adder)
thank you. I will give the 3 setups a go. I did read that if you soft reset before the counter that video calling does not work.
will give it a go and see what happens I'm sure there will be a cab file on here to sort it out.
anyone wishing to add any pearls of wisdom fee free. I'm learning more and more all the time.
app buttons: the buttons on the keyboard, which have changing functions. these functions are shown at the bottom of the screen. These buttons can be found to the right and left of the red and green call buttons on the keyboard.
about video calling: yes, this feature is installed after you switch on first your device. it is activated with one cab file. If you can find out which cab file this is, you can install it manually in the basic setup.
Thread Moved to : http://forum.xda-developers.com/showthread.php?p=1710253#post1710253
Please close this thread someone
I like it, good work. I like it especially it is a 3rd party software so that I can keep my Today screen. BTW, whats the diff of yours compared to the one at the other thread?
Anyway, although getting the aye-Phone interface is good for a start, I think it ought to be able to get some artist to make a better looking interface than aye-Phone.
BTW, as suggestion (for feature), I'm just wondering if you can make your app to respond to the D-Pad (the directional button), like those (say) SonyE phone and then display another graphics to show that the button is being selected.
Design case example:
All icons are black-white. Using your directional button, it goes from one icon to another. The selected icon will have colour (depending on design), and pushing the 'action' button will make it launch the app.
Final thing, whats the difference between yours and the one mentioned at the other thread?
hanmin said:
I like it, good work. I like it especially it is a 3rd party software so that I can keep my Today screen. BTW, whats the diff of yours compared to the one at the other thread?
Anyway, although getting the aye-Phone interface is good for a start, I think it ought to be able to get some artist to make a better looking interface than aye-Phone.
BTW, as suggestion (for feature), I'm just wondering if you can make your app to respond to the D-Pad (the directional button), like those (say) SonyE phone and then display another graphics to show that the button is being selected.
Design case example:
All icons are black-white. Using your directional button, it goes from one icon to another. The selected icon will have colour (depending on design), and pushing the 'action' button will make it launch the app.
Final thing, whats the difference between yours and the one mentioned at the other thread?
Click to expand...
Click to collapse
The Difference is that the other one was in 12/24 hour format, it has no exit button, its 1Meg in size, it has some memory leaks that people complained about. Im sure mine has issues as well so please test and let me know.
I can possible make it work on the dialpad with different icons when they have focus. I just wanne make sure it wont eat too much memory and become to slow. Im not good with graphics at all so any suggestions will be appreciated
I was thinking of a config module, for easier? configuration.
interested?
Inphyy said:
I was thinking of a config module, for easier? configuration.
interested?
Click to expand...
Click to collapse
Good Idea, Ill work on that unless you wanna make it? What do you mean by enabled, should it not show or should it be grayed out?
Grumps said:
Good Idea, Ill work on that unless you wanna make it? What do you mean by enabled, should it not show or should it be grayed out?
Click to expand...
Click to collapse
I can try make it(i hope). Kinda newbie at programing, but i think i can make it work.
should i make it a seperate app and just make it change the config files?
think that would be the easiest, maybe.
Inphyy said:
I can try make it(i hope). Kinda newbie at programing, but i think i can make it work.
should i make it a seperate app and just make it change the config files?
think that would be the easiest, maybe.
Click to expand...
Click to collapse
Yep write a new app if you want and access the config files it would be the easiest. Im also new at programming. What i know i taught myself so thats why its so difficult to do this. This app took my 8 hours to write and im sure someone else could have done it faster and better. Lemme know if you know how to get the Network operator name and Signal strength and battery level out of the registry. I know where they are stored but cant seem to read data from the registry
try this one: http://www.developerfusion.co.uk/show/4640/2/
dunno what you can make out of it, since im learning VB.NET atm and have no clue about C#
found something from a previous app i made for windows, here is some of the code i used, dunno how it's done in C# but im guessing it wouldnt be very different
Imports Microsoft.Win32
Dim RegKey As RegistryKey
Dim regSubKey As RegistryKey
RegKey = Registry.LocalMachine
regSubKey = RegKey.CreateSubKey("SOFTWARE\Example")
regSubKey.SetValue("ExampleDwordValue", "0")
i think i would have used
regSubKey.GetValue("ExampleValue")
in VB but you should just try to find it.
hope it helps you in some way.
Lightweight and fast is good. As what you're doing is basically possible with WA + WAD. BTW, as for the settings, you may want to have the (4 x 4) + (1 x 4) icon grid flexible, incase people want to have large icons (less stuff to launch?). An ayeFone alternatives design, take a look here
http://www.ubergizmo.com/15/archives/2007/04/deeda_piphone_up_next.html
More at the official page
http://www.deeda.com/
Grumps said:
Good Idea, Ill work on that unless you wanna make it? What do you mean by enabled, should it not show or should it be grayed out?
Click to expand...
Click to collapse
I was thinking of removing the whole icon if you dont want it
edit: removing as in hiding
Follow Up
I got the signal strengt working as well as reading the operator name from the registry. The only help i need now is to get the battery level from somewhere withing the registry, ill update the zip files on th first post
sounds good with the provider and signal info, will test it right now.
the icons: since i just arrived home, i did not have any new icons yet. but for workaround reasons, i attached a zip-file with the original iphone-icons , and a zip-file with the alternative icons. i numbered them in the original-iphone-order and added an additional rss-icon (for the 16. field).
(i was not really shure why you choose these other icons in the release (where are they from?)), but the original icons worked just fine for me. the alternatives also.
a blurry picture with before-and-after (left->your release right-> the original icons) is also attached.
nicolas said:
sounds good with the provider and signal info, will test it right now.
the icons: since i just arrived home, i did not have any new icons yet. but for workaround reasons, i attached a zip-file with the original iphone-icons , and a zip-file with the alternative icons. i numbered them in the original-iphone-order and added an additional rss-icon (for the 16. field).
(i was not really shure why you choose these other icons in the release (where are they from?)), but the original icons worked just fine for me. the alternatives also.
a blurry picture with before-and-after (left->your release right-> the original icons) is also attached.
Click to expand...
Click to collapse
I was just messing around to see if the autosizing will work, the icons you have look good so ill use them. I still need an .ico file for the actual app. Any Ideas? O i attached a screen capture app you can try so you dont have to take funny pics hehe
Grumps said:
I was just messing around to see if the autosizing will work, the icons you have look good so ill use them. I still need an .ico file for the actual app. Any Ideas? O i attached a screen capture app you can try so you dont have to take funny pics hehe
Click to expand...
Click to collapse
roger that! and thanks for the screen-capture application.
i'll try to install it via parallels (a mac and a pocket pc is a disastreous combination )
one request: maybe you should use version-numbers by now. its hard to follow which iphone-zip-folder is the "up to date" one.
nicolas said:
roger that! and thanks for the screen-capture application.
i'll try to install it via parallels (a mac and a pocket pc is a disastreous combination )
one request: maybe you should use version-numbers by now. its hard to follow which iphone-zip-folder is the "up to date" one.
Click to expand...
Click to collapse
Ok ive changed it version 0.91
Grumps said:
I got the signal strengt working as well as reading the operator name from the registry. The only help i need now is to get the battery level from somewhere withing the registry, ill update the zip files on th first post
Click to expand...
Click to collapse
Tried using SNAPI?
Trying to remember but I think it was something like SystemState.GetValue(SystemProperty.PowerBatteryStrength).
Will test/check when I get home
*Edit* If you don't want to download the sn api then I think wm stores all state information in HKEY_LOCAL_MACHINE\System\State (battery strength, display orientation, num missed calls, num new sms's etc) */Edit*
Erg, sorry, just noticed the "Visual Studio 2003" part now. SNAPI requires 2005 afaik. Gonna have to grab it from manually from HKEY_LOCAL_MACHINE\System\Status\Battery
ok just tried the latest release. could it be that other file-extensions then *.exe are not recognized?
i.e.: .tr3 or .lnk (i tried to access a tomeraider file and a link to my contacts - but no luck)
furthermore, german pathnames including umlaute ÄÖÜßöäü doesnt work
attachment: was in need for a quick wikipedi /wikimedia icon
does this one have the slide lock?
Link to the other Lock-file
http://www.lakeridgesoftware.com/forum/showthread.php?t=11258
I'm going to hold of on this until it comes out of beta.. I've spent far too long getting the U1000 tweaked and working perfectly with the right combination of settings and software.
That thread has already achieved 12 pages of replies to the launch, so I figure its going through some teething issues already.
Cheers for the update though - a lot of those new features look extremely tempting!
WA3 beta kicks ass..
I am pleased to say, so far, WA3 beta is a vast leap forward from WA2 in terms of features and functionality. I'm loving it, but there seems to be no option for using anything but the default theme at this moment (correct me if I'm wrong peeps).
I'm loving the option to have shortcuts in the TrayApps.
WA3 is brill even in beta...
I'm very pleased to report that despite the many problems reported on the Lakeridge forums about this beta on various devices, it works perfectly on my Ameo.
I love the feature set on this new version and will definately be investing in this once the official release has made it out the door.
I forgot to take a screen shot of it without soft keys enabled (giving one even more screen real estate - if that's what you like).
But here are a few pics that I did take...and Yes you can use your old favourite WA2 Themes or WA3 Themes if you have any.
Final Word: No problems encountered as yet. Brill. I highly recommend checking this out, as it is way better than WA2.
Note: Be sure to completely uninstall WA2 first and save your Themes folder to somewhere else first (you will be able to install these from wherever you drop them later through WA3 i.e. Start/Settings/Personal/Theme Manager).
Drop us a line if you get stuck.
whats the memory utilization like???
ade0282 said:
whats the memory utilization like???
Click to expand...
Click to collapse
Haven't noticed a drop in memory usage. It seems snappier than before. Reports from the Lakeridge website are that the memory usage is considerably lower than WA2.
I've also got this up and running with no probs at all on my wife's Universal (T-Mobile MDA Pro) with no ill effects to speak of.
I did delve a bit deeper into memory usage over here: http://www.4winmobile.com/viewtopic.php?p=62542#62542
Wow, that's impressive news. I might totally back up my U1000 tonight and take a leap of faith. But I'm still skeptical. Really looking forward to official release though!
Now that I think about it, I guess I should anyway - as to provide feedback on any bugs!
mackaby007 said:
Haven't noticed a drop in memory usage. It seems snappier than before. Reports from the Lakeridge website are that the memory usage is considerably lower than WA2.
I've also got this up and running with no probs at all on my wife's Universal (T-Mobile MDA Pro) with no ill effects to speak of.
I did delve a bit deeper into memory usage over here: http://www.4winmobile.com/viewtopic.php?p=62542#62542
Click to expand...
Click to collapse
Hi Mackaby007,
Beautiful pictures you have there. I have been trying this out for a while, but wonder where does your skin come from? It's FANTASTIC looking.
Also, when you press the PROCESS button in the battry pop up, do you get to see the running processes? Mine has nothing there.
Have you tried adding in more applications than one could be accomodated in just one line in the system tray? What happens if you try to have ALL launcheable applications there and run out of space? With applications like SPB pocket plus, you siimply add more tabs. But how about this one? You know what I'm thinking? If it allows all to be launched there, I might just dump my SPB pocket plus and use this to replace it as well as Magic Button.
I much prefer to keep all my applications alive when I press close button. There is really no reason to shut them down, because so doing means than when you need it again, you got to reload from scratch. Imaging reloading Opera Mobile..... It takes forever. So, the way I use me device to to keep ALL frequently used applications alive regardless of whether I press the close button with or without holding it down (I do not want to accidentially close it by holding down too long). If I really want to close it down, currently magic button let me do it be pressing and holding down on the running icon on task bar. I find that with WA3, the process of making an application stay alive when close button is pressed is far too tedious. You need to go to setting>Task>executable, and select the excecutable individually (WA3 works very slowly here unfortunately). Also, choosing to keep it alive still does not prevent me from accidentally closing it when close button is pressed too long. In this regards, I feel that Magic Button's design is far better.
Do you know of a way to suppress the task title all together? My view is that the icon of running task should just be "lighted up" to show it is the current application. Also, we know what application it is anyway by looking at what is staring at you. Why waste the precious real estate on task title?
I like the new ROTATE screen icon, and the ability to show date and time occupyping only one icon space. This is something where magic button should incorporate.
Oh, initially I though that the phone icon will let you click and directly let you use the phone but this is not so. Do yo know of a way to put a real phone task icon on the task bar, so that clicking that icon on the TB will give you access to phone application immediately? The trouble i have is that when phone application is launched, WA5 does not seem to show it on the TB (unlike magic button). I like magic button more in this regard.
Are you using QVGA when you took those screen shots? How does it look in VGA? Would the system tray buttons are far too small? Do you think that if we use VGA and WA3 we could get away from having to use another application such as SPB pocket plus?
One last thing, I could be wrong about this. But I got a distinct feeling that my response time is slower using this rather than Magic Button.
That's a long post, but I'm very interested in your view in the above.
I still cant figure out how to use WAD .. lol... argh! Im st0opit.
Anyone wanna help me out with it? lol.
EagleSteve Q&A....
eaglesteve said:
That's a long post, but I'm very interested in your view in the above.
Click to expand...
Click to collapse
Hi eaglesteve.
Thanks for the compliment. I do like nice screens and preferably unclutterred. Anyway....the WA2 skin can be purchased through Nacashco Designs here: http://www.nascasho.com/Skins-Sub-InD_05.html
and the background image I found trolling around on the deviant art website under; 3 Dimensional. (see attachment)
Q & A (I'll do my best)
Q1. Also, when you press the PROCESS button in the battry pop up, do you get to see the running processes? Mine has nothing there.
A.1 Yes I see all the running processes and am able to stop any one of them.
Q2. Have you tried adding in more applications than one could be accomodated in just one line in the system tray?
A2. Yes, but it won't display any more than 15 icons from my experience. No point in addind any more as you cannot scroll through them (in the hope that you will see the other shortcuts you added previously). That's a good point to take up with Chris at Lakeridge, as he mat be willing to incorporate this into WA3 as it's still in beta.
Q3. Do you know of a way to suppress the task title all together? My view is that the icon of running task should just be "lighted up" to show it is the current application.
A3. Yes mine is currently set up this way too. I only want to see an icon of running apps.** I think under the 'Buttons' menu you have to go to 'Assignments' and ensure that 'Title' is NOT checked.
Q4. Do yo know of a way to put a real phone task icon on the task bar?
A4. I've added the phone app to the System tray (no need for keyboard anymore ). It's called 'Phone.lnk', but should be a visible icon when you go to choose it.
Q5. Are you using QVGA when you took those screen shots? How does it look in VGA? Would the system tray buttons are far too small? Do you think that if we use VGA and WA3 we could get away from having to use another application such as SPB pocket plus?
A5. I suppose you would call it QVGA (default mode). I tried TrueVGA and whilst it looks great, I don't like that I can hardly see anything. Got good eyesight at the mo and don't want to start straining. 2nd half of your question...Yes I think it's definitely possible, as you'd theoretically fit many more icons in the Tray applet/System Tray. Good thinking Batman! I might have to reconsider TrueVGA just for that!
Q6. But I got a distinct feeling that my response time is slower using this rather than Magic Button.
A6. I've used Magic button in the past and was very pleased with it, but stopped using it once I found that you can close apps properly through WA2. Unlike yourself, I like things properly shut down unless I'm going back to it soon, hence the nice running tasks icons.
Ok that should be about it. I hope I answered most if not all of your questions.
mackaby007 that's a great scren. So let me get this right , i buy the theme and get the backround and then i import it to wa3?
Also how do you replace / remove the default tray icons that come with t-mobile, i used the tray display program but that just removes all tray items. I just want to add the programs that i use
Would SPB diary work with this theme? as i have mine on today screen.
thanks
bashi007 said:
mackaby007 that's a great scren. So let me get this right , i buy the theme and get the backround and then i import it to wa3?
Also how do you replace / remove the default tray icons that come with t-mobile, i used the tray display program but that just removes all tray items. I just want to add the programs that i use
Would SPB diary work with this theme? as i have mine on today screen.
thanks
Click to expand...
Click to collapse
Hi bashi007. Yes to the first 3 questions. I can't comment on Spb Diary as I've never used it, but I can't see why it should pose a problem.
If you have an Ameo from T-Mobile;
........regarding the system tray...there is a thread already on it...let me go see................
.....aha here it is:http://forum.xda-developers.com/showthread.php?t=307086
Go to.....Hkey_Local_Machine\SOFTWARE\HTC\TrayApplet with a reg editor and delete all the little folders that contain the links for the existing shortcuts (free up some space). Be sure to have the system tray visible again first though, so you can see the changes you have made. If you don't see it, uninstall the Tray applet switching application and reboot.
If you own an X7500/Advantage read this thread: http://forum.xda-developers.com/showthread.php?t=308250 Once you've gotten rid of all your system appointed icons, follow on to the skinning app.
Now try WA3 system tray.
Let us know if you run into probs.
Thanks mackaby007 for your reply, i have a slight problem in that i delete the folders in the tray applet, but it still leaves the icon in the tray.
bashi007 said:
Thanks mackaby007 for your reply, i have a slight problem in that i delete the folders in the tray applet, but it still leaves the icon in the tray.
Click to expand...
Click to collapse
hi bashi007 what variant of the AThena do you have? If you have the Advantage, you'll have to delete the folders in the HTC Homeplug folder instead or aswell. Then soft reset your device and they should no longer be visible in the system tray.
Thanks for the help, i have Ameo, after soft resetting all seems to work. Great!
i presume i buy the VGA theme from Nacashco Designs.
bashi007 said:
Thanks for the help, i have Ameo, after soft resetting all seems to work. Great!
i presume i buy the VGA theme from Nacashco Designs.
Click to expand...
Click to collapse
Yes. Check your PM added more info for you.
WA3 Public Beta 2 is out...
Hot off the press..go get it people. Apparently even more stable than the first release!
Just about to install. Will report back later.
bashi007 said:
Thanks for the help, i have Ameo, after soft resetting all seems to work. Great!
i presume i buy the VGA theme from Nacashco Designs.
Click to expand...
Click to collapse
Hi,
What is this "VGA theme from Nacashco Designs" ?
olegzz said:
Hi,
What is this "VGA theme from Nacashco Designs" ?
Click to expand...
Click to collapse
Hi olegzz.
I can see by your joining date that you are new to this forum, so I will be patient with.
It is generally good practice to read through a thread before asking questions that may have already been asked and or answered.
In this instance no one has asked, but there are only 2 pages to this thread and one glance at the first page would have fully revealed what you asked.
to answer your question nonetheless, it is merely a skin made for Wisbar Advance 2 and is one of hundreds of interchangeable skins. Some of us just happen to like this one.
If you know about these things already I apoligise for my tone. If however you don't, then this might be of real interest to you as it completely changes the look and feel of your WM device.
The screenshots on page 1 of this thread are just 1 example of this. Best to head on over to Lakeridge software (website) to get a clearer picture.
Good luck.
mackaby007 said:
Hi olegzz.
I can see by your joining date that you are new to this forum, so I will be patient with.
It is generally good practice to read through a thread before asking questions that may have already been asked and or answered.
In this instance no one has asked, but there are only 2 pages to this thread and one glance at the first page would have fully revealed what you asked.
to answer your question nonetheless, it is merely a skin made for Wisbar Advance 2 and is one of hundreds of interchangeable skins. Some of us just happen to like this one.
If you know about these things already I apoligise for my tone. If however you don't, then this might be of real interest to you as it completely changes the look and feel of your WM device.
The screenshots on page 1 of this thread are just 1 example of this. Best to head on over to Lakeridge software (website) to get a clearer picture.
Good luck.
Click to expand...
Click to collapse
My, that was way more polite than my response would have been!
what are you guys using for switching profiles ?
i'm looking for a basic profiles app along thelines of ppcprofiles or phoneweaver.
unfortunately, i cannot seem to get phoneweaver to work at all - changing profiles says that the notification has changed but it never does.
is anyone else having this problem or should i blame it all on tf3d ?
thanks in advance
I always use the SPB movile shell and want more profiles too!
you could use spb phone suite. it works but imho it takes up too much place on the today screen.
phenx said:
you could use spb phone suite. it works but imho it takes up too much place on the today screen.
Click to expand...
Click to collapse
i did try that and i agree - it's far too complex !
have decided upon a hard reset and retrying phoneweaver :-(
mrdo said:
what are you guys using for switching profiles ?
i'm looking for a basic profiles app along thelines of ppcprofiles or phoneweaver.
unfortunately, i cannot seem to get phoneweaver to work at all - changing profiles says that the notification has changed but it never does.
is anyone else having this problem or should i blame it all on tf3d ?
thanks in advance
Click to expand...
Click to collapse
Hi there all,
you could use the Touch HD\ HTC profile manager. It can be found under the Xperia Programs, Panels and tweaks section for the Xperia. I was also looking for the same thing a while back, and found that.
hope that helps!
winmowgster said:
Hi there all,
you could use the Touch HD\ HTC profile manager. It can be found under the Xperia Programs, Panels and tweaks section for the Xperia. I was also looking for the same thing a while back, and found that.
hope that helps!
Click to expand...
Click to collapse
Can you post a link please? I can't find it and neither can the search engine.
At the moment I use SPB Phone Suite and it integrates into the Mobile Shell panel, if you don't like it on your today screen.
Sorry, my mistake... first post! Link Contained.
Here is the link to the whole thread:
http://forum.xda-developers.com/showthread.php?t=441439
the section your after is under Touch HD utils its called volume control
Regards
Winmowgster
I dont think we are talking about the same thing? ... the volume control is just a new skin for setting the volume right? .. I think with profiles we mean like they are used in nokia phones where depending on your selected profile u ve a different ringtone, volume, message tone etc. ?
cause I d find something like this really useful .. at the moment I cant even figure out how to change the tone of when I receive a text message.
Looking at the Original Poster's request, I suggested a solution, which I thought fits the bill pretty well.
If you want to switch between silent, ring and vibrate then this does the job.
having read the request again, and googling the programs that mrdo tried, i see that i may have made a mistake. :S
The SPB Phone Suite is awesome! Well worth the dosh! Have as many profiles as you want plus automatic time or event based profile switching.
winmowgster said:
Looking at the Original Poster's request, I suggested a solution, which I thought fits the bill pretty well.
If you want to switch between silent, ring and vibrate then this does the job.
having read the request again, and googling the programs that mrdo tried, i see that i may have made a mistake. :S
Click to expand...
Click to collapse
thanks for your input. i do have the touchstone volume control installed and it's very handy but i am looking for something that will allow me to switch ringtones, alerts and volumes at the touch of a button.
after a hard reset and yet another reinstall of my apps, phoneweaver still doesn't work. grrr and double grrr.
mrdo, what is the problem specifically? Is there an error on the device or do you start the application but nothing of significance appears?
I briefly tried phoneweaver and had the latter problem. Couldnt figure out whether it was running or not.
In the end I ended up giving up and going for the Touch HD simple profile manager.
I don't find HTC profile manager in that thread, can u post the direct link?
winmowgster said:
mrdo, what is the problem specifically? Is there an error on the device or do you start the application but nothing of significance appears?
I briefly tried phoneweaver and had the latter problem. Couldnt figure out whether it was running or not.
In the end I ended up giving up and going for the Touch HD simple profile manager.
Click to expand...
Click to collapse
the application installs and seems to work properly but the alerts and ringtones don't actually change. not really sure what the issue is at this stage ...
nap007 said:
I don't find HTC profile manager in that thread, can u post the direct link?
Click to expand...
Click to collapse
it's just a larger volume control rather than a profile manager :
Blackstone Volumecontrol - WORKING ON EXPERIA
http://forum.xda-developers.com/showthread.php?t=442154
direct link :
http://forum.xda-developers.com/attachment.php?attachmentid=127106&d=1225749027
Hi all, I seem to be having trouble finding any sort of documentation on how to develop Titanium Plugins for the WM6.5 home screen... Is there any information out there that someone could point me to? My plan is to use Visual Studio 2008 (3.5 .Net) if that makes any difference... Thanks for any help.
Well it's all about interaction with registry. You could also use mortscript. even tho Visual Studio can do it too. You just need to write the needed keys to the registry, and point to them in your .cpr file.
larbke666 said:
Well it's all about interaction with registry. You could also use mortscript. even tho Visual Studio can do it too. You just need to write the needed keys to the registry, and point to them in your .cpr file.
Click to expand...
Click to collapse
Thanks for the tip. Are there any places where this is documented...? Seems a bit strange to keep this information so well hidden...
I'll continue the search...
Wigmund said:
Thanks for the tip. Are there any places where this is documented...? Seems a bit strange to keep this information so well hidden...
I'll continue the search...
Click to expand...
Click to collapse
It's not hidden just search for it, for example:
http://forum.xda-developers.com/showpost.php?p=3601164&postcount=2
http://forum.xda-developers.com/showthread.php?t=509492
and there are more
I started documenting my journey on CHome development.
http://brunolauze.spaces.live.com/blog/cns!8827D2F13B317CBF!427.entry
CHome Documentation
I started documenting my journey on CHome development. I hope to add more in days to come.
http://brunolauze.spaces.live.com/blog/cns!8827D2F13B317CBF!427.entry
blauze said:
I started documenting my journey on CHome development. I hope to add more in days to come.
http://brunolauze.spaces.live.com/blog/cns!8827D2F13B317CBF!427.entry
Click to expand...
Click to collapse
Even though I'm logged in on Windows Live I have no access to your live space ...
Thanks for the pointers... and as far as official documentation goes, it doesn't seem that forth coming... btw, I can't view blauze space either.
I was trying to figure out a similar thing.
I manually added a panel to Titanium called "Battery". What I wanted was a little tool that put the latest battery charge percentage as the panel name.
After a bit of digging I realised the following code kind of works:
Code:
Dim key As Microsoft.Win32.RegistryKey = Microsoft.Win32.Registry.LocalMachine.OpenSubKey("Software\Microsoft\CHome\battery\Page1", True)
key.SetValue("TEXT1", Status.SystemState.GetValue(Status.SystemProperty.PowerBatteryStrength) & "%")
key.Close()
It does successfully change the name of the first page of the panel to the latest battery charge.
Only problem now is, I can't figure out how to get Titanium to refresh... in other words, how to get it to re-read the registry keys. At the moment, it only works by soft-resetting the phone!
digital_elysium said:
Only problem now is, I can't figure out how to get Titanium to refresh... in other words, how to get it to re-read the registry keys. At the moment, it only works by soft-resetting the phone!
Click to expand...
Click to collapse
Simply change "HKLM\Software\Microsoft\CHome\battery\Updated" from its current value to another.
Has anyone figured out a way to do a registry update or execute a script when a panel/page is selected in Titanium without having to "click" it to update?
Here's what I'd like to do... let's say I have a Twitter panel that retrieves my unread tweets every NN minutes. Sliding left/right switches between the tweets, but as I slide onto a tweet, I want to mark it from UnRead to Read in a registry setting. I currently can "click" it to update the status to Read, but havn't found anyway to do it otherwise.
I asked this awhile ago, the thread sat and went stale with no responses. Just wondering if someone ran across a new trick.
-Daryel
Okay, I have no ability to create panels and such, However I have 2 ideas for panels. One, the BAF Gps Toggle panel and a notes panel where a new page is created for each note (similar to taskanium) Anyone think they could do these?? Attached is the .cab for the GPS toggle if needed.