Related
I have a Telstra branded HD and wanted to know if anyone has tried flashing the ROM on one of these to a standard ROM?
If so, which one did you use to flash the ROM?
Not that I know anything about flashing ROM's and the phone is only a day old so I am a little worried about trying it.
The first thing I suppose.....is there anyway of backing up the ROM and anything else needed to return the phone to a Telstra branded ROM for warranty purposes if required.
I am at my wits end with this phone in it's current form as I am trying to run it with a vodafone SIM, so all the Telstra shortcuts and websites don't work anyway, that and the Telstra tab seems to replace the weather tab with the current ROM.
I suppose I had better see if I can search the forum for instructions on flashing ROM's for dummies....anyone know a good thread?
Flashing a ROM is not difficult its flashing an spl that is scary(since if you mess up or if your device shuts off while its in the process you have a brick in your hands now, with a rom all you need to do is try again.), also if you want it to be at stock condition if you want to revert back to the original ROM, then use USPL, doesn't change the spl. You have to dump the ROM from the device and then you save it some where safe, then you flash a ROM of your choice. Its not that hard to initiate the process though, since its basically the same for all the devices, if you search around here on the forum for a guide then that should do you some good , but since I am nice here are some useful links.
Guide to flashing:
http://wiki.xda-developers.com/index.php?pagename=Flashing Guide
USPL:
http://forum.xda-developers.com/showthread.php?t=462347
HSPL:
http://forum.xda-developers.com/showthread.php?t=431217
List of cooked ROMs:
http://forum.xda-developers.com/showthread.php?t=464463
Awesome, thanks for that, I am off to do some reading, one quick question...
On the first guide it says I need to CID-unlock the phone, it that what USPL and HSPL can do for me?
Yea, you don't have to cid unlock since its not available for the Blackstone yet.
Just HardSPL'd my Telstra BLAC120?
I've just used HardSPL on my Telstra Touch HD which is a BLAC120? Is it safe to continue flashing ROM's or can I somehow go back to the original SPL? Then use USPL?
The phone is still in working order after the HardSPL Flash.
Cheers,
-Lucus
HSPL is perfectly fine, but if you want it to be like stock(for warranty purposes), just use USPL to flash the original spl back. You are perfectly fine how you are Lucus Maximus.
~~Tito~~ said:
HSPL is perfectly fine, but if you want it to be like stock(for warranty purposes), just use USPL to flash the original spl back. You are perfectly fine how you are Lucus Maximus.
Click to expand...
Click to collapse
Cheers, thanks for the help
-Lucus
This is making my head spin.....been reading and downloading and I am getting very confused, once it all falls into place I am guessing it is going to be easy.
Right I would like to dump the existing ROM and flash with a new one....I need to confirm the steps and what is required.
CID-Unlock the phone, from what you said I don't need to worry about this part
1. Run USPL - have downloaded v2.4...should be good to go
2. What is RUU Update as it mentions it in the instructions for USPL
3. I am guessing at this point I need to backup the existing ROM, not sure how this is done
3. Then the guide says to download the new ROM and run the exe and follow the steps.....sounds easy enough
Some of the guides don't really explain much.....anyway I am thinking of giving it a go.
So do you flash radio's and splash screens using the same method.
Sorry for all the questions (I am guessing you have heard them all before, but I can't find a thread from a ROM flashing virgin like me with all the info), I have been reading, but gets a little confusing after a while.
Ok, RUU update is just the .exe file to use the .nbh(rom file) so it can start flashing.
Hmmm. . . . . .if I had any htc device right now I would make a video guide. . . .
It takes like 2 times for you to get used to flashing a phone, don't worry we have all been there .
pikey1967 said:
This is making my head spin.....been reading and downloading and I am getting very confused, once it all falls into place I am guessing it is going to be easy.
Right I would like to dump the existing ROM and flash with a new one....I need to confirm the steps and what is required.
CID-Unlock the phone, from what you said I don't need to worry about this part
1. Run USPL - have downloaded v2.4...should be good to go
2. What is RUU Update as it mentions it in the instructions for USPL
3. I am guessing at this point I need to backup the existing ROM, not sure how this is done
3. Then the guide says to download the new ROM and run the exe and follow the steps.....sounds easy enough
Some of the guides don't really explain much.....anyway I am thinking of giving it a go.
So do you flash radio's and splash screens using the same method.
Sorry for all the questions (I am guessing you have heard them all before, but I can't find a thread from a ROM flashing virgin like me with all the info), I have been reading, but gets a little confusing after a while.
Click to expand...
Click to collapse
If you don't want to worry about backing up your existing ROM the Telstra one is available on the HTC website here
Hope that helps
-Lucus
Thanks for that....right now to go and find myself a new ROM.
Just out of interest, which ROM did you use Lucas?
Been looking at this.......
Dutty's ROMS
What is the difference with these:
HD V1.7 5.2.20769.1.4.5 Full CVSD WWE
HD V1.7 5.2.20769.1.4.5 Full MSVC WWE
I am yet to work out all this ROM talk......I am guessing WWE is the English version, but what is "CVSD" & "MSVC"
Oh and how do I work out what radio version these ROMS use to make sure it is the same as the one I have
When you turn on your device, look at the red R and see what it says, then when you flash a ROM with a different radio, just re flash yours.(same process as flashing a ROM but easier, and there are different radios available to DL).
pikey1967 said:
Thanks for that....right now to go and find myself a new ROM.
Just out of interest, which ROM did you use Lucas?
Been looking at this.......
Dutty's ROMS
What is the difference with these:
HD V1.7 5.2.20769.1.4.5 Full CVSD WWE
HD V1.7 5.2.20769.1.4.5 Full MSVC WWE
I am yet to work out all this ROM talk......I am guessing WWE is the English version, but what is "CVSD" & "MSVC"
Oh and how do I work out what radio version these ROMS use to make sure it is the same as the one I have
Click to expand...
Click to collapse
FAQ: What are CVSD and MSVC.
Solution: CVSD is Cyberon Voice Speed Dial which is mostly the default voice application in most shipped ROMs. MSVC is Microsoft Voice Command which is an advance voice application from MS.
I tried Black Pearl, but most things I've read are saying that Dutty's is the best, so giving that a go now.
As long as I can get all the telstra site settings working I'll stick with it otherwise it's back to the Telstra ROM untill I can find out a way to get it all working.
-Lucus
Too easy, flashed the ROM to Duttys v1.7
Now to go and find all the missing ring tones and stuff, I think I saw something in a thread about Dutty having extra cabs to install this stuff...
I would recommended this to anyone who is trying to run the Telstra branded HD on anything other than the Telstra network.
Getting there now, I have managed to download all the ringtones and stuff, so I have more than the 3 ringtones supplied with the ROM
Where is this MSVC that is supposed to be part of the ROM???
Off to search some more and see what other software I can find.
This has made the Telstra branded HD a lot better, all Telstra branding has gone, including splash screen and the phone actually works now, can get POP3 email, Internet, Exchange email etc without an issue.
The first thing it did was set the phone up for the correct Network as soon as I put in the SIM and powered it up....great!
Well I was really pissed off with the HD with all the Telstra branding and was at the point of returning the HD and going back to the iPhone, but now things are starting to look up......we will see how things go.
pikey1967 said:
Getting there now, I have managed to download all the ringtones and stuff, so I have more than the 3 ringtones supplied with the ROM
Where is this MSVC that is supposed to be part of the ROM???
Off to search some more and see what other software I can find.
This has made the Telstra branded HD a lot better, all Telstra branding has gone, including splash screen and the phone actually works now, can get POP3 email, Internet, Exchange email etc without an issue.
The first thing it did was set the phone up for the correct Network as soon as I put in the SIM and powered it up....great!
Well I was really pissed off with the HD with all the Telstra branding and was at the point of returning the HD and going back to the iPhone, but now things are starting to look up......we will see how things go.
Click to expand...
Click to collapse
Yep, all you needed to do is change the ROM, you didn't need to return anything. It was just the shipped ROM that's all.
Thanks again for your help....
Still trying to find the MSVC app in Dutty's ROM v1.7???
I downloaded the MSVC version, but can't see the application
great info here guys, just got my HD the other day and dislike all the Telstra branding. one question though before I begin changing ROM's, did you guys finally end up getting the weather tab to work, or the "customize tabs" option in the settings tab?
cheers,
Ditto! Can someone pls confirm Dutty's ROM has weather+stocks tab etc? And can someone who downloaded the Telstra ROM off HTC please mirror it somewhere? (attach here or mediafire it etc). Or if anyone has an official Blackstone rom from another region that would be good too... many thanks!
Well
how many of us have successfully flash WM6.5?
is it advisable to flash it?
Personally I am happy with SPB Mobile Shell 3. The I am not interested in another WinMo version until 7, which will need another phone.
GPS performans with WM6.5
Flashed with Tommy34's ROM with WM6.5.
Very happy that my GPS fixing -boring- delay is fully resolved.
I almost believed in my Device have had a hardware defect, then realized it is none..
I have got one single trouble that SKYPE WinMobile v2.5 can not be installed..
I will try v3.0 Beta ASAP I am able to download..
***Edited***
Beta v3.0 works out..
I installed tommy34 cHome 0.4 ROM and I'm very happy with it. My gps finally works too...and the phone is more response in general.
i have used
hi
i have used ironeagles,tommy34 & right now using Pdaviet 6.5ROM V07
Which i have posted today at the Jade Rom development
all are working fine and no problem at all for me
Hy everyone,
i'm using the ironeagles version and it's working really smooth.
erm
can anyone be kind enough to make a video tutorial on how to flash the rom?
i really wan the WM6.5 rom but i really have no idea how to do it
redsuns said:
erm
can anyone be kind enough to make a video tutorial on how to flash the rom?
i really wan the WM6.5 rom but i really have no idea how to do it
Click to expand...
Click to collapse
try reading this post:
http://forum.xda-developers.com/showthread.php?t=514406
good luck!
@redsuns have u dont HSPL
hi
first u need to do ur HSPL a tute is given in the jade rom development section
read the same and do it as u cant flash cooked ROMs without HSPL
but remember if u do it u will lose ur warranty
once u have done the same Flashing is very easy
if u cant understand i will give u details but first get ur HSPL done OK
redsuns said:
erm
can anyone be kind enough to make a video tutorial on how to flash the rom?
i really wan the WM6.5 rom but i really have no idea how to do it
Click to expand...
Click to collapse
haree said:
hi
first u need to do ur HSPL a tute is given in the jade rom development section
read the same and do it as u cant flash cooked ROMs without HSPL
but remember if u do it u will lose ur warranty
once u have done the same Flashing is very easy
if u cant understand i will give u details but first get ur HSPL done OK
Click to expand...
Click to collapse
eek
i dun wan to lose my warranty
maybe i should drop the idea
thanks anyway
@redsuns
hi
Yes it if scared u don't do it for ur info my phone is new too around 2 weeks old but i did it on the third day
redsuns said:
eek
i dun wan to lose my warranty
maybe i should drop the idea
thanks anyway
Click to expand...
Click to collapse
I have not been able to flash my phone.
I am using Vista and when I try and flash the rom on the phone, I get:
Vista has found new hardware (I think it was a CDMA Driver)
I've flashed WM6.5 (can't remember which version I used), and I thought all was going well, until I tried to sim unlock it. The phone is 2 months old, with Orange branding, and had the horrible Orange Unique Manager, which is why I wanted to flash the phone, and I assumed the phone was simlocked. After I flashed it, I bought a Sim Unlock Code, but when I put a 3 sim card in, I didn't get the expected "Enter SIM Unlock Code" prompt. Instead I just get "No Service" displayed on the home screen with the exclaimation mark at the top where the signal strength is displayed. I've also tried with an (active contract) T-mob Sim, and a Tesco Mob Sim. Same thing, I don't get the prompt to be able put the unlock code in.
I can't help thinking it's because I've flashed the phone, it seems like there's something preventing the Enter SIM Unlock Code dialog from coming up. Is there anyone else with this problem, or a solution? What ROMs are people using that they have sucessfully SIM unlocked their phones with?
Thank you!
So does it still work with an Orange Sim?
I have flashed my Orange UK Jade with various flavours of WM6.5, all with good results, currently using a version cooked by PDAVIET, with no issues.
Guys, is it possible to flash to Windows 6.5 then flash again to 6.1 if all doesn't go well?
just wondering but are PDAVIET, Ironeagle and Tommy34s version of wm 6.5 all have 8gb micro sd support. And also which would you recommend as the best.
I flash 6.5 German and ist is working grate.
I used
Jade_LeanCut_GER_WM65_5.2.23001_OEM_2.33.721.1
Installed
2DManila_1_20_19131530_00
And MUI 407 files from erviuskitchen german kittchen.
And installed only th programms that i need.
Only i need Thai caracters in sms. It is not possible to change the thaom font to a full wich Asiatic caracters. installed msss.tff and change all to it, but manila sms does not take care about font change in sms/messages...
I tryed to coock a rom usin erviuskitchen german kittchen wich only changing tahoma font. but all roms i cooked with it are getting instable after 2 dayes. My favorite navigation system wich german and Asien maps does not start afer 3 times anymore.
Si i stick nearly fully satisfyed with the Jade_LeanCut_GER_WM65_5.2.23001_OEM_2.33.721.1
Hi,
I got my HTC since 2 mounth, and i really want to test WM6.5, but i must say that i'm a little afraid about flashing my phone.
I've read the "flash for n00bs" post, and it seems that there is a way to "flash-back" your phone to a factory version, am I right...?
By the way, if i want to use my waranty, can i "flash-back" my phone ?
Sorry for my bad english, thanks guys !
Eizig from France
Hello,
I am from Brazil and bought my Touch 3G about two months ago. It came with WM 6.1.
Last week I successfully applied the "Hard SPL 2.33 by Olinex" and then Flashed it with "Touch3G__WM6.5__2_33_721_17__B23033_WWE" ROM from PDVIANET.
Everything is running fine. The only comment is that we really need to disabled the 3G (H) network and run just with Edge (E) in order to save some battery. Other than that I recommend everybody to upgrade to WM 6.5
Fleck
Hi
I am having issues with my HD - I originally got this from Telstra and every time I try and ROM it - the phone functionality won't switch on - it seems to only have the wireless working - the ROM itself does work and it doesn't matter what ROM I use.
I was hoping someone might be able to help me here, Thanks in advanced
AJK
moved to correct section
ajk34 said:
Hi
I am having issues with my HD - I originally got this from Telstra and every time I try and ROM it - the phone functionality won't switch on - it seems to only have the wireless working - the ROM itself does work and it doesn't matter what ROM I use.
I was hoping someone might be able to help me here, Thanks in advanced
AJK
Click to expand...
Click to collapse
your phone does not have the right SPL for the ROM. read the HD Flashing Guide and prep your phone for ROM flashing. once the first 3 lines of the bootloader (or the red section) looks like the picture of this http://forum.xda-developers.com/showthread.php?p=3638336#post3638336Bootloader you're ready to flash. goog luck!
I haven't used my Touch HD in a very long time and when I turn it on now (dont remember what happened) it says upgrade ROM code error please try again. Does HTC have an upgrade for it? I live in the US and their site doesn't show anything about the phone, used europe site but gave me a no updates for that serial number. I am guessing that a stock ROM from HTC would fix this problem as the phone is not unlocked.
Shipped roms can be found here. Hope this helps.
If you receive "Upgrade ROM code error" then you will need to flash original stock rom which was on your device, i.e. not any stock rom but the original one. Your original stock rom should flash whether it says 'usb' or 'serial' at bottom of bootloader.
Link to stock roms has been provided in post above
Thanks
Thanks a lot, I haven't used that phone for probably a year so I hope that fixes it. I cannot wait to use that phone again, since I paid good money for it.
Hallo.
I flashed the Energy.BLACKSTONE.29020.Sense2.5.GER.Cookie.2.0.Touch.Of.Glass.Jun.02.
Now the phone find no connect.
I use an HTC BLACKSTONE.
I hope you can help me.
Sorry for my bad english.
Best regards
Matthias
make007 said:
Hallo.
I flashed the Energy.BLACKSTONE.29020.Sense2.5.GER.Cookie.2.0.Touch.Of.Glass.Jun.02.
Now the phone find no connect.
I use an HTC BLACKSTONE.
I hope you can help me.
Sorry for my bad english.
Best regards
Matthias
Click to expand...
Click to collapse
Did you follow this guide and put either USPL or HSPL on your device first?
Before flashing anything, its always best to read the stickies (thread stuck at top of each forum which provide guides, references etc). My advice would be to read this
Here new ROM for Mozart
http://www.filefactory.com/file/b48..._1.28.111.03_5.52.09.16_22.33a.50_RELEASE.exe
DO NOT TRY TO FLASH THIS ROM FOR ANY OTHER DEVICE EXCEPT MOZART!
Enjoy!
THNX a LOT!
Hopefully it fixes my problems with sending text messages.
Will I lose my data (mainly my SMSes) if I install this update?
//EDIT -> according to several forums, I will lose my data...
and I haven't found any solution to backup my SMSes - yeah -.-
Is there anything I should regard or be aware of before updating?
//EDIT -> I just tried updating my phone and don't know how. It boots in the bootloader (RGB-test with some data on the device, SPL, the SD card, ...) just fine but the RUU doesn't find it.
I'm trying to flash it from a Windows XP machine - is there anything I have to take care of before I can flash it?
Or is there a real step-by-step manual for total dummies (I've flashed my HTC Diamond several times before without problems and have got no clue, why the PC won't find my Mozart).
The update process cancels with a CONNECTION ERROR [260].
will the hspa work on it from the tmobile usa after flashing this rom???
Invalid vender id
I have
INVALID VENDER ID
T-Mobile
Is there already a solution?
THX
nice greetings
Do you have the German T-Mobile version?
Mine flashed without any problems (after solving the driver problem...).
I have T-Mobile Austria.
but that this should be the same, right?
Greetings
Well, I'm not exactly sure.
However, if you think about the update failing with a wrong VENDOR ID - I guess it makes a difference.
FrozenLord said:
Do you have the German T-Mobile version?
Mine flashed without any problems (after solving the driver problem...).
Click to expand...
Click to collapse
are there any big noticable changes after flashing the new rom?
or is it just a minor security/stability update?
Be careful when uninstalling TMO apps
ROM is working very good, more fluent than stock version 1.25 - no problems found yet.
Still noticed the same problems with the stock ROM after uninstalling TMO shipped apps. When I uninstall Navigon the BING Map "Search" and "get directions" is gone/does not work anymore. When I remove "mediencenter" and plug in the headphones the phone is neither accepting nor able of making calls. However reflashing solves the problem - but you can't get rid of those TMO apps without losing functionality.
cmxqu said:
ROM is working very good, more fluent than stock version 1.25 - no problems found yet.
Still noticed the same problems with the stock ROM after uninstalling TMO shipped apps. When I uninstall Navigon the BING Map "Search" and "get directions" is gone/does not work anymore. When I remove "mediencenter" and plug in the headphones the phone is neither accepting nor able of making calls. However reflashing solves the problem - but you can't get rid of those TMO apps without losing functionality.
Click to expand...
Click to collapse
Strange, i deleted all the default T-mobile stuff and everything works just fine..
I also have the german T-mobile Mozart 16GB because it isn't released in the netherlands yet. I uninstalled all the programs Tmo ships. directions work just fine, very strange
hi
hi bro.. i have a question, first.
1- How to flash this ROM in my HTC 7 MOZART?
2- What news have this ROM? it is possible that my phone is blocked trying to flash this rom?
3- What fix this ROM in my cellphone?
thanks bro...
fabrifox said:
hi bro.. i have a question, first.
1- How to flash this ROM in my HTC 7 MOZART?
2- What news have this ROM? it is possible that my phone is blocked trying to flash this rom?
3- What fix this ROM in my cellphone?
thanks bro...
Click to expand...
Click to collapse
According to some other sites (just google the version number), this rom ships out with new devices. So no, it should not get you blocked, as it's a legit update.
Flashing is fairly easy: Backup everything you can, start you Mozart in Bootloader mode (pressing volume down while powering it on), plug it into your PC via USB, install the drivers if needed (done by installing Active Sync in XP, Windows Vista and newer should automatically find the needed drivers), start the updater and follow the instructions.
There is no official changelog, but several people think that the animations are smoother, the touchscreen reacts faster, ...
Seeing that there is no official changelog and the only thing we can do is assume what could have changed, I think there's no sense in discussing this. Especially since you can find several threads in other forums that discuss the changes in various lengths...
I haven't noticed any new problems after the update, so I guess it's at least as good as the previous version.
But this are just my thoughts
hi
FrozenLord said:
According to some other sites (just google the version number), this rom ships out with new devices. So no, it should not get you blocked, as it's a legit update.
Flashing is fairly easy: Backup everything you can, start you Mozart in Bootloader mode (pressing volume down while powering it on), plug it into your PC via USB, install the drivers if needed (done by installing Active Sync in XP, Windows Vista and newer should automatically find the needed drivers), start the updater and follow the instructions.
There is no official changelog, but several people think that the animations are smoother, the touchscreen reacts faster, ...
Seeing that there is no official changelog and the only thing we can do is assume what could have changed, I think there's no sense in discussing this. Especially since you can find several threads in other forums that discuss the changes in various lengths...
I haven't noticed any new problems after the update, so I guess it's at least as good as the previous version.
But this are just my thoughts
Click to expand...
Click to collapse
Thank you so much!!! Ure a bad man =) i try to flash and later i said ok....
if i have a german t-mobile device, do I have to flash my mozart at first? Or can _I just install the new firmware without doing anything before??
edit: and is this version newer or this one: [ROM]RUU_Mozart_HTC_Europe_1.28.401.04_5.52.09.16_22.33 a.50_RELEASE
am I able to install both on my german tmobile mozart?
WinUser009 said:
if i have a german t-mobile device, do I have to flash my mozart at first? Or can _I just install the new firmware without doing anything before??
edit: and is this version newer or this one: [ROM]RUU_Mozart_HTC_Europe_1.28.401.04_5.52.09.16_22.33 a.50_RELEASE
am I able to install both on my german tmobile mozart?
Click to expand...
Click to collapse
No you can't flash the HTC_Europe version, only the TMO_DE version.
TMO_DE stands for T-mobile Germany
HTC_Europe is the generic software for the non branded devices.
Doesn't make any difference except the useless apps you get from t-mobile.
But after you delete them everything is the same.
And for the record, You don't have to flash your phone at first... Installing new firmware IS flashing. so you just run the RUU and make sure zune is running and phone is running, not in stand-by.
And be sure to backup everything you want to keep, haven't flashed my mozart, but i think you lose all data when you flash it.
Sure someone else knows that.
Aerox912 said:
No you can't flash the HTC_Europe version, only the TMO_DE version.
TMO_DE stands for T-mobile Germany
HTC_Europe is the generic software for the non branded devices.
Doesn't make any difference except the useless apps you get from t-mobile.
But after you delete them everything is the same.
And for the record, You don't have to flash your phone at first... Installing new firmware IS flashing. so you just run the RUU and make sure zune is running and phone is running, not in stand-by.
And be sure to backup everything you want to keep, haven't flashed my mozart, but i think you lose all data when you flash it.
Sure someone else knows that.
Click to expand...
Click to collapse
Thanks for the answer!
I thought that I have to set the mozart in the bootloader mode, in order to flash. When I was telling it "flashing" I meant something like hspl like we had to do on the HD2, befor we could flash custom roms or htc roms on it.
edit: and is there any possibility to go back to: 1.25.2250.5 firmware (now installed on my phone)?
and last question this 1.28 version will not breake my warranty, right? It'S a normal t-mobile rom, isn't it?
Guys, I'm not sure I fully understand everything so far.
I basically have a Telstra (Australian) HTC 7 Mozart. From what I gather, I cannot flash this on my device until it is unbranded, is that correct?
hello to everyone.
I have a htc t-mobile mozart Germany but I live in Venezuela and I can assure you and proven DepNet.com for both 1.25 and 1.28
posted on this page to a friend Football and run to perfection
and also I can tell you that my phone came with 1.25 and the 1.28 istale him but then return to 1.25 and all is well.
and the echo for several times trying to place the Spanish language and if anyone can help I'd appreciate it forever
@ WinUser009:
HSPL was needed because we used to flash cooked (and therefore custom-made) ROMs, which were not signed by HTC or any other company able to sign them. These ROMs are unmodified and signed, which is why you can flash them without flashing any unlocked HSPL first.
Bootloader-mode is just a different mode to boot in - it does not need any changes to your phone!
I don't think that there is a possibility to go back to 1.25.xxx - but honestly why would you want to? But I have to admit that I have not yet tried it...
As to the warranty: that's a complicated matter...
This firmware is not official and my new Mozart (I got a new one after sending it in) still had the 1.25 firmware installed (someone posted that newer phones should ship with the 1.28). So there might be a person detecting that you flashed it yourself, if they keep sending out new phones with 1.25 preinstalled.
However, the phone I turned in had 1.28 flashed and I have not received any complaints when I sent it in for a replacement. So I guess it is up to your shop but it should not pose any problems!
@ameel
You can flash as soon as one of these things happen:
- custom roms are released that don't check for the carrier information
- you unlock your phone (somehow)
- Telstra releases an update
But as of now you can't flash these T-Mobile roms on your Mozart.
@minino405
Sorry, but I didn't understand your post. What did you try to tell / ask us?
I hope I could help you with some of your questions