updating to newest sprint code.. errors! - Hero CDMA General

so i did a nandroid restore.. downloaded the update and it fails with:
Finding update package...
I:Update location: CACHE:fumo/update.pkg
Opening update package...
I:Update file path: /cache/fumo/update.pkg
Verifying update package...
W:Can't verify META-INF/CERT.RSA
E:No signature (265 files)
E:Verification failed
Installation aborted.
I:Set boot command ""
I:Set boot command ""
I:Set boot command ""
I:Set boot command ""

slackwaresupport said:
so i did a nandroid restore.. downloaded the update and it fails with:
Finding update package...
I:Update location: CACHE:fumo/update.pkg
Opening update package...
I:Update file path: /cache/fumo/update.pkg
Verifying update package...
W:Can't verify META-INF/CERT.RSA
E:No signature (265 files)
E:Verification failed
Installation aborted.
I:Set boot command ""
I:Set boot command ""
I:Set boot command ""
I:Set boot command ""
Click to expand...
Click to collapse
Based on your errors (thanks for putting them all in there) it looks like you downloaded the update directly from Sprint (OTA), so you would think that the download itself was fine. But if it's saying it's not signed then the download must be corrupted. Try going back through the menu and saying firmware update again. If it says there isn't one available then you may need to delete update.pkg and reboot and try again.
Also just an FYI, Fresh ROM 4.0+ has the new update already in it.

ya.. ive was on modaco.. just didnt like it. is the fresh really that good?? i had problems with modaco when i goto edit a contact, it says social network not available, and doesnt let me edit it.

flipzmode said:
Based on your errors (thanks for putting them all in there) it looks like you downloaded the update directly from Sprint (OTA), so you would think that the download itself was fine. But if it's saying it's not signed then the download must be corrupted. Try going back through the menu and saying firmware update again. If it says there isn't one available then you may need to delete update.pkg and reboot and try again.
Also just an FYI, Fresh ROM 4.0+ has the new update already in it.
Click to expand...
Click to collapse
fresh rom 4.0+???? i only see 0.6b..

slackwaresupport said:
fresh rom 4.0+???? i only see 0.6b..
Click to expand...
Click to collapse
I meant it's been included since 4.0. Grab 0.6b if you like the blue theme (check the screen shots) or just 0.6 if you don't want the theme.
And you can't ask if I think it's that good... I make it.

slackwaresupport said:
ya.. ive was on modaco.. just didnt like it. is the fresh really that good?? i had problems with modaco when i goto edit a contact, it says social network not available, and doesnt let me edit it.
Click to expand...
Click to collapse
It is the best at the best at this time. With updates that are very praid . usually with in a few hours of changes

Related

Trouble with ROM manager

When I was trying to flash a ROM, I encountered the following error message when I backed up the current ROM:
Reboot into Recovery:
Enter: POWER Key. Select : Vol UP / Vol Down
reboot system now
reinstall packages
delete all user data
format internal sd-card
Click to expand...
Click to collapse
-----------------------------
...
Not need checksum confirmation
-- Movi_check already executed!!...
-- movi-checking done!...
update media. finished.
-- Install from package...
Finding update package...
Opening update package...
E:Can't open /cache/Update.zip
-- Appling Muti-CSC..
Installing Multi-CSC
Installation aborted.
Click to expand...
Click to collapse
I had to reboot the system since I didn't know how to proceed. When I tried Root into Recovery, I got the same above error message. Why was it trying to deal with Update.zip which is supposed to be the file for rooting? I don't know if this is related or not: I'm currently with Bi-Winning, and I'm still having trouble mounting my phone with computer.
Any suggestions? All help is highly appreciated!

Update Problem (different than the others)

Before anyone freaks on me asking for help i have tried all the other fixes and they dont work for my problem.
i havent deleted any apps, im rooted, i havent manually changed any files other than build.prop and i have already converted it back to original.
i HAVE had to resort to the chinese update to fix a problem from borked ubuntu install.
and here is a copy of the last part of my last_log
Code:
...
E: /dev/block/mmcblk1 does exist
Finding update package...
I:Update location: /cache/acer_ug/update.zip
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is q690 bytes; signature 1672 bytes from end
I:whole-file signature verified
::verify_file returned 0
Installing update...
Verifying current system...
contents of partition "/dev/block/mmcblk0p2" didn't match EMMC:/dev/block/mmcblk0p2:3094528:############################################################# file "EMMC:/dev/block/mmcblk0p2:3094528:#############################################################" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("EMMC:/dev/block/mmcblk0p2:3094528:#############################################################")
assert failed: apply_patch_check("EMMC:/dev/block/mmcblk0p2:3094528:#############################################################")
E:Error in /cache/acer_ug/update.zip
(status 7)
Installation aborted.
just for ease of retyping i replaced the long list of numbers/alpha with ### each instance is the same identical numbers on my log though.
after it tries to install the update i get the triangle and then reboots to the way it was prior.
Your boot partition / kernel (/dev/block/mmcblk0p2) doesn't match what the update expects. Have you by any chance flashed the chinese update before?
adancau said:
Your boot partition / kernel (/dev/block/mmcblk0p2) doesn't match what the update expects. Have you by any chance flashed the chinese update before?
Click to expand...
Click to collapse
Before anyone freaks on me asking for help i have tried all the other fixes and they dont work for my problem.
i havent deleted any apps, im rooted, i havent manually changed any files other than build.prop and i have already converted it back to original.
i HAVE had to resort to the chinese update to fix a problem from borked ubuntu install.
and here is a copy of the last part of my last_log
[log]
after it tries to install the update i get the triangle and then reboots to the way it was prior.
Click to expand...
Click to collapse
10char..........
n1nj4dude said:
i HAVE had to resort to the chinese update to fix a problem from borked ubuntu install.
Click to expand...
Click to collapse
Then use the fix given in the Chinese update.zip thread!
working on it... its not exactly plain english for those of us new to the whole android thing.
thanks....

How to update tf300t to jb 4,1 for dummies

Hello,
I have a rooted tf300t and I'm trying to update it to the JB . And I really need some kind of " Step by Step from scratch" guide,
Can anyone be my light in this moment of darkness?
tks:good:
Download the JB firmware here
http://forum.xda-developers.com/showthread.php?p=27095558 under "Asus firmware"
And flash that bad boy in recovery.
Sent from my Nexus S 4G using Tapatalk 2
luizfpg said:
Hello,
I have a rooted tf300t and I'm trying to update it to the JB . And I really need some kind of " Step by Step from scratch" guide,
Can anyone be my light in this moment of darkness?
tks:good:
Click to expand...
Click to collapse
There is a step by step easy thread, it's general and pretty much has the same thread headline as yours. Look for it and you'll be updated
Sent from my SGH-T989 using xda app-developers app
DMardroid said:
Download the JB firmware here
http://forum.xda-developers.com/showthread.php?p=27095558 under "Asus firmware"
And flash that bad boy in recovery.
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
I've donwloaded the file via Asus site, but now I don't know what to do next.
luizfpg said:
I've donwloaded the file via Asus site, but now I don't know what to do next.
Click to expand...
Click to collapse
Extract it.
There should be another zip in there. That's the one to flash.
Sent from my Nexus S 4G using Tapatalk 2
DMardroid said:
Extract it.
There should be another zip in there. That's the one to flash.
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
Worked!!! The problem ig that I wasn"t extracting properly.... Thanks..
luizfpg said:
Worked!!! The problem ig that I wasn"t extracting properly.... Thanks..
Click to expand...
Click to collapse
Hi, could you please tell me where can i find a guide on how to flash my device with JB software. I'm in Europe,with EU TF300.
EDIT: I DID THAT:
Finally found a workaround for the "not finding any update".
1: download the dlpkgfile and command file found here on the forum.
2: use a file manager with root permissions (eg:es file explorer)
3: copy the dlpkgfile to /cache and the command file to /cache/recovery.
4: temp unroot with the Voodoo app
5: restore original build.prop
6: reboot in recovery (hold power + volume down) untill the white text appears telling you to press volume up to enter recovery
7: auto installs
8: reboot + reroot with the voodoo app
Failed after step 7.
Same way as with Official automatic update which failed and I am unable to repeat it... please help
EDIT2:
The log file says:
Code:
I:Enable RSA key verification.
Installing update...
Finding update package...
I:Update location: /cache/dlpkgfile
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1682 bytes; signature 1664 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Installing update...
Check : blob size = 13104069
Verifying current system...
file "/system/bin/iptables" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/bin/iptables", "c17d0e858fb71cd4886f765f26ac4371d6a875d5", "9a6180a19d373e64857d81942acc2d2544bd65b7")
assert failed: apply_patch_check("/system/bin/iptables", "c17d0e858fb71cd4886f765f26ac4371d6a875d5", "9a6180a19d373e64857d81942acc2d2544bd65b7")
E:Error in /cache/dlpkgfile
(Status 7)
Installation aborted.
I:result_code: 410
Check and format /storage to vfat if needed...
Mount /btmac successfully
Done.
I:timed out waiting for key input; rebooting.
OK

[Q] Lenovo Stock Firmware won't setup with fail on assertion

Sorry for the links, but I'm new user, so I can't post outside links.
I'm trying to install firmware (download(.)lenovo(.)com/slates/think/tablet1/ThinkPadTablet_A310_03_0069_0121_ROW.zip) from lenovo firmware list (download(.)lenovo(.)com/slates/think/tablet1/) on my Thinkpad Tablet 16Gb 3G.
Firstly, when I just tried to use it as backup (CWM) it fails just saying "md5 mismatch". I think it was fully wrong way.
Then, I tried to install it from "install zip from sdcard" CWM command. It fails with this output:
-- Installing: /sdcard/update.zip
Finding update package...
Opening update package...
Installing update...
assert failed: file_getprop("/system/build.prop", "ro.build.fingerprint") == "Lenovo/ThinkPadTablet/Indigo:3.1/ThinkPadTablet_A310_02/0039_0089_ROW:user/release-keys" || file_getprop("/system/build.prop", "ro.build.fingerprint") == "Lenovo/ThinkPadTablet/Indigo:4.0.3/ThinkPadTablet_A400_03/0069_0121_ROW:user/release-keys"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted
Click to expand...
Click to collapse
Then, I understand that in zip I downloaded there was no /system/build.prop. I found some version of this file, but for US and changed all occurences of US to ROW. That's what I've got: paste(.)ubuntu(.)com/1676846/. It concains this string:
ro.build.fingerprint=Lenovo/ThinkPadTablet/Indigo:3.1/ThinkPadTablet_A310_02/0039_0089_ROW:user/release-keys
Click to expand...
Click to collapse
But now I get the same error as when there was no build.prop at all.
What have I to do?
Thank you, Dmitry.
Hi,
firmware updates should come OverTheAir, not by downloading something.
There is an option in Settings->About where you can check for updates.
Maybe this ROM doesn't match your tablet or current ROM (if it's just a partial update).
If you're absolutely sure that this ROM matches your current configuration (and ONLY then):
I think the problem isn't in the zip, but on your tablet.
The assertions are in the zip and check for the target system.
This should prevent you from accidentally installing the wrong ROM.
So check your tablet's /system/build.prop
If you force the update by editing your build.prop, you may brick it!!!
Micky

Help Nexus 7 JZ054K wont install any update

I have a Nexus 7 with Android 4.1.2 ( JZ054K) and the damn thing wont install any Rom i load onto it.
I copied the text from recovery menu, maybe someone here can help me with that.
finding update package...
opening update package...
Installing update...
verifying current system...
assert failed: apply_patch_check("/system/app/phonesky.apk", "a7d39ad7438b0fb6347033a75b5d5054aae9bfa8", "0178827dead56e73ece35ffa29345bf3793b842a")
E:Error in /sdcard/c01f18e07f87.signed-nakasi-JOP40D-from-JZ054K.c01f18e0.zip
(status 7)
Installation aborted.
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. please open Rom Manager to report the issue.
Also, even though my Nexus 7 is still 4.1.2 i dont get any update notifications from google, and checking for system updates says that the device is up to date.
Pr0xY42 said:
I have a Nexus 7 with Android 4.1.2 ( JZ054K) and the damn thing wont install any Rom i load onto it.
I copied the text from recovery menu, maybe someone here can help me with that.
finding update package...
opening update package...
Installing update...
verifying current system...
assert failed: apply_patch_check("/system/app/phonesky.apk", "a7d39ad7438b0fb6347033a75b5d5054aae9bfa8", "0178827dead56e73ece35ffa29345bf3793b842a")
E:Error in /sdcard/c01f18e07f87.signed-nakasi-JOP40D-from-JZ054K.c01f18e0.zip
(status 7)
Installation aborted.
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. please open Rom Manager to report the issue.
Also, even though my Nexus 7 is still 4.1.2 i dont get any update notifications from google, and checking for system updates says that the device is up to date.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1907796
Pr0xY42 said:
I have a Nexus 7 with Android 4.1.2 ( JZ054K) and the damn thing wont install any Rom i load onto it.
I copied the text from recovery menu, maybe someone here can help me with that.
finding update package...
opening update package...
Installing update...
verifying current system...
assert failed: apply_patch_check("/system/app/phonesky.apk", "a7d39ad7438b0fb6347033a75b5d5054aae9bfa8", "0178827dead56e73ece35ffa29345bf3793b842a")
E:Error in /sdcard/c01f18e07f87.signed-nakasi-JOP40D-from-JZ054K.c01f18e0.zip
(status 7)
Installation aborted.
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. please open Rom Manager to report the issue.
Also, even though my Nexus 7 is still 4.1.2 i dont get any update notifications from google, and checking for system updates says that the device is up to date.
Click to expand...
Click to collapse
\
Read the guide aobove

Categories

Resources