Related
Hi!
I have a huge problem, with my tytn HTC
I have a wireles network at home. It is built like this:
Cable modem --> (not wireless)Router--> computer (conected to the router via UTP cable, that means with ordinary network adapter card).
In this computer, i have WIRELESS USB card, configured as Access point (AP), so the wireless networks works just fine. With my laptop i can connect to internet through this card with no problem at all...
But, when i try to connect to internet with my TyTN, it just won't work... it finds wireless network, it sais it is available, but when i try to connect, nothing happens. it sais "connecting" and than- nothing happens... after several tries, it sais that my wireless network is unavailable... when i reset my Tynt, it sais it is available again, but the same story again...after several attempts to connect to wireless network, it sais unavailable and that's it...
What is wrong? i tried everything, im quite desspered here...
Well, tnx in advance for any suggestions and advices...
I appologise for my bad english, too...
TNX!
Do you have any restrictions in your Acess point configuration? If yo have, just remove it or reconfigure for acess with your TyTN. Try to remove WEP or MAC filtering or firewall...
Resolving your wireless problems ...
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
i removed restrictions and firewall and still nothing...
Next thing, my wireless Access Point is set to 54g Auto.
On my Tynt i have installed Windows mobile 6 profesional, CE OS 5.2.1437 (build 17944.0.3.1)
I don't know exactly where should i look if my HTC is wireless is B or G...
I tried to change settings on my AP from 54g Auto to 802.11B and to to 802.11G and vice versa, but still nothing...
As i wrote before, i don't have wireless router i just have an ordinary router and then wireless USB card in one of the computers, so i can connect with my laptop to internet over this card. With laptop it works excelent.
So, can anyone suggest what kind of OS should i install on my HTC in order to fix this, and where can i get one?
TNX for so far, and TNX in advance for any further information or suggestion!
Still having problems...i tried everything...
i tried to connect to wireless network at friend's wireless router...TyNT found a signal, everything was just fine, then asked me for key (friend has WEP protection), i typed the password, and then i couldn't connect again...
I havo no clue whatsoever anymore...
Anyone with same problem?? Any suggestions?
Tnx in advance for any advice...
hmm...
I guess it is a hardware problem with my tynt's WI-FI...i can't think of anything else... i tried everything, still can not connect...
Im getting quite desspered with this HTC... i guess i'll sell it and buy NOKIA N95 or something like that...
well, if someone by any chance know where the problem is, i thanks in advance for every advice or suggestion
TNX
tytn wireless
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
wifi
same problem here ...
I have tried to flash older radio didn't help ...
I have tried disable wep on my router ... didn't help
I'm just in a loop of AVAILABLE-->CONNECTING-->AVAILABLE etc.
please if someone finds a solution (patch) for this problem post it to this thread.
still there?
lithocan said:
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
Click to expand...
Click to collapse
Hi!
I'm just wondering are there any solutions been found?
Or it's definitely hardware problem?
WBR!
problem
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
pischk said:
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
Click to expand...
Click to collapse
Recently bought my wife one of these devices and just spent two whole days looking for a solution and that was it.. mixed mode - I had mine set to "G" only! Sometimes the solution is too simple for the geek to be able to spot I guess - maybe the wife would have found it faster!
Thanks for the solution.. as with all forums I always suggest a FAQ with these solutions or links to the threads/posts with these tips and resolutions.
kralcak said:
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
Click to expand...
Click to collapse
Lucky... Mine did not connect anymore, flashed black majik over schaps3.6 and voilla! worked again... without touching the router.... Will try last schaps tonight.... I´m tired of flashing and reinstalling....
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
What protocal are you using on your router? WPA, WEP?
Oh if your using an older Belkin router, I know of about 3-4 models that used to have trouble with WinMo, an update Router flash fixes it though.
Give us some more info on your router etc and Im sure we can help though
Sure your using the right password/key? if it says its wrongs it is probably wrong lol. Maybe try changing it to a more basic password as a test? like "password" and see if it can get connect.
knightrider66 said:
Please help, ive had my hd2 for a few days now and have had nothing but problems, might just give it back!
It picks up my home router but simplify wont connect, it just displays a small rotating circle likes it working but nothings happening.
When i remove the settings and retype the key code it keeps saying incorrect code but it isnt,
Anyone any ideas, can i some how reset the wifi settings, its taken me a few days to customize the phone so i dont really want to do a hardwear reset. Ive already a software restset.
Bloody htc!
Click to expand...
Click to collapse
Hi
Calm down. Give some information about your router and the type of security You use.
try these
1. Reset the router once
2. If you use MAc access list on the router then add your device's MAC to the list.
3. If you use N router then in the settings untick N mode protection.
Give more details about the third party software on the hd2 using radios (eg: tomtom, igo,gpstuner like these)
Good luck
HI guys thanks for helping out.
Obvious first - yes the key code is correct i use it on my laptop and iphone.
security mode says WAP-PSK/WPA2-PSK. Its a siemens ive been on the ip server addres and cant see any issues, im on my laptop using the wifi now and its working perfet.
Ive tried everything, changing passwords, settings both on the router and on the phone.
The hd2 is full of really stupid bugs!
Try to hardreset the PPC.
If it won't work, try to update your ROM to the latest available.
If it doesn't want to work, then try to connect to another WiFi without password and see the connection is successful.
If it works with an unprotected WiFi, try to connect to a different router but with protected WiFi.
If it works, then there is a problem with your router and I suggest to update your router's firmware.
funny wifi
the problem wit my hd2 is most of the time it shows wifi connected but i cant surf the internet and sometimes out of the blues it connects to the internet,cant figure out wats happening....
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
knightrider66 said:
HI kholk, thanks for the help, ill work my way through it and hopefully get it sorted!
Click to expand...
Click to collapse
Have you found the solution? I can help you my friend i had the same situation
I tried to connect yesterday my hd2 with my router. First it wasnt working aswell. Then i set the next things. Channel 9 (was auto), Encryption AES (was tkip and AES). Network mode is Mixed. Further have you installed Mac Filter? I installed this also. So if i have a connection thats it. I must fill in my macadres from my phone for i get fully connected.
Hi guys thanks all for you help call HTC UK support and their amazing advice was to do a full hard reset!
I really am having a lot of problems with this phone and i cant understand why their have been so many issues?!
Hi guys,
I have the same problem- HD2 shows it is connected, but no access to Internet(other- laptop, SE990 phone is connected and working OK)
For not to write about all, now situation is:
1. On router wrt54g2 temporary disabled wireless security, only mac filtering is on(laptop mac, SE mac, HD2 mac is allowed), router firmware is up to date
2.HD2 is like new after hard reset, no settings is done for connection to home network. HD2 wifi is on, looking for access points and connecting to only one available open network in my area- to my home network and shows it is connected but no access to Internet.
3. In router I can see all connected clients by mac. All 3(lap, SE, HD2) are connected. I use Network Magic software too but it is showing only my laptop and desktop are connected. SE is not connected according NM, but it is working OK.
P.S.
Do not know what else can help you in my problem(maybe some other router setting, but as other devices are connected without problems so maybe it is not important for now)
So only my HD2 can not access WWW
Can You guys help somehow please
I've got a similar problem with an HD2 over here. Wifi does switch on, but it just won't connect to my router. The cirkel that is supposed to show when connecting to a network doesn't show either. I'm using WPA2-AES security, and yes, i did use the proper network key. I haven't tried connecting to other networks/using an alternative encryption method because a lot of other devices will then have to be reconfigured and it's not my own place. My Touch HD and 2 laptop connect to the network without any problems. The only solution I came across until now is doing a hard reset, which I would rather not do... I'm using a stock dutch rom (V1.43). Is it possible that upgrading to the newer 1.48 will solve this problem?
Have you tried removing the wireless security password and trying again? Test to see if maybe you are indeed typing in the password wrong.
Also check your exception list on your router, it might be blocking any other devices coming in.
I have the same problem.. Get the spinning loading circle and thats it.. But if i turn my belkin wires g router running wpa2 off then straight back on again the phone connects fine. But if i then leave my house or disconnect from the network then try and reconnect it wont and have to do the same process again. Luckily im also running a speedtouch 585 modem router which the phone connects fine to.
hey maybe it takes only a WEP key and not WPA as most people have. this is certainly the case as mentioned in the Wifi router article below -
http://www.mobilityminded.com/5438/wi-fi-router-on-htc-hd2-application-overview
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
allann said:
Again me
It seems that it is problem with my router. HD2 was able to connect to open wireless a.p. in my town and all sow to my friends router which is using WPA security. So my linksys is not compatible, or i will try some other settings on it, but as other router clients have no problems, i am loosing my hope to have my HD2 connected at home unless i change router. But then another problem- which router will be compatible with all my devices in prise range of 100$
And replying to blackheart2925 my friend is using wpa not wep, i do not know other settings on his router but it is not security problem.
One thing is strange for my HD2 shows it is connected, router shows mac of HD2 among connected clients, but only HD2 do not have access to internet
Click to expand...
Click to collapse
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
commando0 said:
how are you connected to internet is it router which dials to isp or you have made a broadband dial up on your desk top ...
if you have dial up shortcut on desktop then you can not use internet via hd then change setting in router
better way is hard reset router and then reconnect hopefully it will solve your issue ..........
Click to expand...
Click to collapse
Router "dials" to my isp and share internet for all connected devices...
Yes, i am going to hard resset my router, but have not much hope i sucsess
PROB:
If your HD2 connects to router but you cannot enter any web site, do this:
SOLUTION:
enter your www router settings - wireless - access control - MAC Address Filtering Table ->>>>> add your HD2 MAC adress
enter your www router settings - firewall - access control ->>>>> add your HD2 MAC adress
so, you have to add your MAC adress of HD2 into router TWO TIMES into TWO PLACES!
I had the same problem and..... solved
This phone doesn't support ad hoc wifi connections? I'm currently on travel overseas and I can't seem to share an Internet connection with my laptop (connected via LAN) or iPhone 3GS (local 3G service). Has anyone been able to detect an ad hoc wifi network with this phone.
I can detect ad hoc networks with 3rd party wifi apps on the marketplace but when I attempt to connect, it directs me to the general wifi settings screen where the network is gone!!
Anyone else with this issue?
Did you ever see that it was an international phone?
WTF?? I'm talkin about a Wifi connection here buddy...lol. The EVO 4G doesn't detect or connect to ad hoc wifi networks. That's the topic...
while i dont know if it does or doesnt...i could believe it...because there is a few phones out there that dont - blackberry is one.
The wireless tether app for Android makes it into an ad hoc device.
But the problem is that it won't DETECT an ad-hoc device. Interesting. So if I had, say a hero with WiFi tether enabled, I wouldn't be able to see the WiFi with my EVO?
I don't connect to ad-hoc networks myself, unless I"m trying to tether something (the only use I can see.) Interesting that the EVO can't see them though, they should still show up..huh.
Seems to be some type of security feature on the device (WiFi Scanner app detects) that prevents it from detecting ad hoc wireless networks. My PS3 also has the same issue. Just wanted to point it out the issue...perhaps we need to root to manually connect?
just to be clear, you're trying to share your laptops internet with your Evo?
Yes, the laptop has Internet access via LAN and I am using the built in ICS (Internet Connection Sharing) Wifi Sharing on Windows Vista. Every other device I've had before had no issue detecting the network...I can see the access point right now on my iPhone and iPod Touch :-/
Found this workaround:
http://www.soligard.com/technology/how-to-connect-htc-hero-to-ad-hoc-wifi-network/
I'll try this later and report back.
I don't know if I'm experiencing the same problem but maybe someone can tell what I'm doing wrong. I rooted my phone by unrevoked and installed the Android-Wifi-Tether program. I've activated the program and it's sending out a signal. I then use my Windows Vista comp. to located it and it shows my phone as an "Ad-Hoc Network" when I connect to it, it says your computer is not configured for this. I'm not sure now what I should do, is there a problem with my EVO, or this something I need to do with the computer.
OP you are absolutely correct. I actually was trying the exact example you stated. I had created an ad-hoc wireless hotspot/network via Wireless Tether App on my Hero and my EVO just plain did not see it. It saw a million other networks that were much farther away, but not my Hero that was right next to it. This is unfortunate. Hopefully a workaround is found soon.
A lot of devices don't connect via an Ad Hoc network... which makes me wonder what its purpose even is :/ One reason I submitted the idea (true wifi hotspot) I did to the WP7 app contest.
This is what made me return my Archos 5 Android tablet and stick to my iPod Touch.
My scenario, i have a Sprint Treo and an iPod Touch (and iPad as well) and usually turn my Treo into a wifi router via wmwifirouter and use iPod Touch this way. Been doing this for years (with other devices too like the Nokia N800/N810), and wanted to test out Android. I got the Archos 5 tablet and was saddened not to be able to use my Treo's ad-hoc wifi. Back it went.
It seems that Android devices do not connect to ad-hoc wifi networks. Shame indeed. Also i think the Zune HD does not connect to ad-hoc as well.
Is it an O.S specific issue?
I am a new member. I have searched for answER but no found
My gt-i5503, firmware 2.1... when connecting to wifi(WPA/WPA2 PSK) networks, just says "obtaining ip&.........disabled." but it also has no problem connecting to another WPA PSk network in my office.same thing is happening with my friends phone gt-i5503 tried at 2-3( WPA/WPA2 PSK) networks,also flashed my phone.....plz help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
piyushrathi said:
I am a new member. I have searched for answER but no found
My gt-i5503, firmware 2.1... when connecting to wifi(WPA/WPA2 PSK) networks, just says "obtaining ip&.........disabled." but it also has no problem connecting to another WPA PSk network in my office.same thing is happening with my friends phone gt-i5503 tried at 2-3( WPA/WPA2 PSK) networks,also flashed my phone.....plz help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
you need a wlantest.apk of FW you are using
Have you ever used this network with another device before? And worked it? This may be that problem.. WiFi may be protected by MAC filter. Lets say if it IS protected with this filter, you have to configure your WiFi router and add MAC adress of your phone into it. If it isn't, try another ROM or try to do something with your router.
dont have any idea about MC filter but other phones (nokia 5800,95) & also samsung wave of worth Rs.7500/- is also working with it ,my lapy is also works with it plz guys help me............. http://media.xda-developers.com/images/smilies/mad.gif
piyushrathi said:
dont have any idea about MC filter but other phones (nokia 5800,95) & also samsung wave of worth Rs.7500/- is also working with it ,my lapy is also works with it plz guys help me............. http://media.xda-developers.com/images/smilies/mad.gif
Click to expand...
Click to collapse
this is a problem with the way your router gives ip to device
go in your router settings and reset all
then imput a new pass key
then it will work
i had problem with my ps3 haveing the same ip as my phone so when boath where online my phone no work online
a simple router reset to default and a new pass key fixed all problems
hey its my college wifi i can't edit it... is their some other way??????
If it is with what the craigboro guy said, you could use a laptop or another android device to scan the network (check the market, net scan or something) to scan the IP addresses on the network and then in advanced settings give your phone an IP that isn't being used, not ideal but hey, you're asking in the G3 section, not the g5 section, so you are bound to get general answers
I just got an HD2 (flashed windows 7) and when I try connecting it to my home network, it will say connecting and then after a while it shows "Connection Unsuccessful"
I have a linksys wrt610n router, and i even tried resetting the router but still the problem persists.
First I thought it might be a phone issue, but it was connecting perfectly fine to the local library's hotspot and a starbucks hotspot. So that means, it's definitely something wrong with my house network that it won't let me connect.
All the other devices : ipod touch, laptop, xbox 360, connect fine to the network.
Please help me with this issue, as I am using HD2 without a data plan so without wifi,i cant fully use the functionalities of hd2.
Thanks.
Is your ssid hidden? Wp7 has troubles with that, you could try the wp7 section without sounding cocky, there is a couple of threads mate about it, more help in there.
Sent from my HTC Leo using XDA Premium App
Yeah, even before flashing the rom the same problem existed. I think it's something wrong with my network, as I am able to connect perfectly fine with at a starbucks hotspot.
And no it's not hidden. The networks visible and the name of the network is with spaces -> cow boy , does that make a difference?
do you have mac filtering or anything turned on liked that in the router setup ??
do you have any crazy characters in the password like %^& ??? that could be a prob not sure also check these out looks like it could be a sd card problem, have you ever had it connect using android or winmo 6.5???
http://forum.xda-developers.com/showthread.php?t=913644
http://forum.xda-developers.com/showthread.php?t=913644