Related
The small sliver of rubber that is stuck horizontally towards the bottom of the back of my Vario has fallen off.
I bought the device in the UK but am now out of there and the devices sold locally to me don't have this piece. Does anyone have details of a 'spares' company that could sell me this ridiculous 'part'? The stamp for the envelope will definitely be worth more than the piece of rubber but it's so handy and I want it back!
well, i would try calling the factory in taiwan, hah! (or making your own piece of rubber)
Yeah...mine fell of too...but I don't miss it at all, maybe that I will make my own peace of rubber sometime, but for now it does not bother me a single bit
if you live in atlanta i can give you mines i doubt anyone sells that piece, just buy the battery cover.
mine fell off too but I didn't really care. just get a black marker and color that part of the battery cover where the rubber used to be. it will look brand new again! lol
Egrips. check em out
Replacement battery covers cost $7 from HTC. Google them or search this site for contact numbers.
I'm just gonna search for a little piece of rubber and cut it to the correct size.
Then I'm gonna glue it to the battery cover of my Wizard. Only then I am sure it will never fall of again
Molski
I have a broken battery cover with the rubber part still on it. PM me your address and I'll post it to you.
First come first served.
Steve.
Hello,
sorry for my stupid question, but does somebody know, where can I buy back black battery cover for HTC P4350?
On eBay and other servers I can only find blue covers for T-Mobile Wing
Thank you very much!
I am not sure how different your battery cover is to the wing in how it attaches but I can tell you the Wing/Atlas covers on eBay, etc... do come in black and fit very well. Again, not sure how your back cover compares to camera placement on the wing but that could be an option.
Thank you
So another question:
Does somebody know, if Wing/P4351 backdoor cover fits on HTC P4350?
They don't
I originally had a 4350. The back on it is both shaped and attaches differently than that of the Wing. I don't know why they changed it on the wing, and the back on the wing is held on by four of the tiniest little tabs you can imagine, and they break easily. If you ever insert the stylus at an angle, expect to break off the tab in that corner. Terrible design. The 4350s back cover covers only the battery area, and locks in place with a sliding switch. Never a problem with that one.
Ah, thank you very much dude. I was almost ordering Wing back door cover, now I know, that it won't fit. Thanks
After a week of using a cheapo leather case I pulled my SGT out and found that the back panel (white) edges have dark splotches on them, almost like its been placed over a flame. Tried rubbing it off with all sorts of stuff but it just wont come off. My wife has had an iPhone for 2 years and the white panel on the back still looks new. Quality of the material perhaps? anyone else have this and able to clean it?
Sent from my GT-P1000 using XDA App
More like the cheap leather case of yours tainted the black color onto the back of your tab. I had this kind of case before, but luckily I have a layer of screen protector at the back, even that layer is tainted..It's not the tab, just the cheap casing.
no discoloration here, my tab is naked all the time tho
As a rule, as soon as I get my devices I get them laminated (a good one at that) both front and back. Thr surface on the front is resistant to oily hand marks and the back one well lets just say keeps it shining for a good 6-8 months before I get a new one done. This way selling it is never a problem. Cheers!
Sent from my GT-P1000 using XDA App
I had that problem with my Galaxy Tab and the Samsung leather case that came with it. It seems that the soft fabric they line the inside with rubs off onto the Tab. It's not actually that big of a deal to get off. I took some rubbing alcohol (70% Isopropyl Alcohol), poured it on a cotton ball and used a small amount of pressure. It came right off and my Tab looked brand new.
I am in India, waiting for the free leather case from Samsung.One concern is about the heat,if the back is encased,can the device heat up? Will it affect it adversely ?
n2s2k2india said:
I am in India, waiting for the free leather case from Samsung.One concern is about the heat,if the back is encased,can the device heat up? Will it affect it adversely ?
Click to expand...
Click to collapse
I have not experienced any problems with the device heating up while in the case. To be perfectly honest, the only time I have even felt the device get slightly warm is when I'm charging it via the wall charger. Even then, it doesn't get that warm. If you're worried though, you can always charge the device outside of the case. While you're using it though, you won't have to worry about it overheating in the case.
Put on an invisishield before you put it in the case. There are a few companies that sell then online for a cheap price.
I still can't get it off, anyway I ditched the case and made one myself instead. You can find it in the SGT accessories forum
Sent from my GT-P1000 using XDA App
I had/have the same problem from a black cowhide case I got from acceport.com - unsightly black blotches on the white back. I had a go at the firm that sold me the case but, naturally, have had no reply. The back almost looks new now after plenty of polishing with an almost daily cleaning and polishing with an all-purpose cleaner I have seen many of the phone shops here in Thailand use to clean telephone screens, etc. Still it will never look like new - it will always have some visible signs of the staining.
Waxy
Not that my reply is helpful to your situation but it's interesting that each US carrier chose their own different design for the back. AT&T definitely chose wisely with their matte carbon fiber styling. I was in a T-Mobile store this weekend looking at their Tab and that glossy black style is a terrible finger print magnet and now I am reading that the white can discolor. Way to go AT&T, your customer service sucks but someone made a good decision at a terrible company.
same problem here.. black cheap leather... dirty white back, I'll try with alcohol, anyways I buy a new "clip-on" leather that seems look better and it has stand
dealextreme leather case
Since the camera lens cover on the Note is flush with the back casing, it is prone to scratching if you don't have a case and mine was quite badly scratched.
I bought a replacement lens cover for about £5 including postage off Ebay, but the cover is part of the middle chassis, and although I managed to remove the middle chassis easily enough, I couldn't separate the lens cover from the chassis. I then found that the whole middle chassis for less than a tenner here:
http://www.dealrepairs.co.uk/samsung-galaxy-note-middle-cover-chassis-housing_p722.html
Note - some people seem to be having problems ordering from this site - be warned!
I bought it, and it was a perfect match for the original, with a perfect, unscratched camera lens cover. Job done!
The middle chassis housing is easy to remove - unscrew 9 screws and it prises off. Plenty of videos on YouTube to show you how.
Thanks, will try it out if my become scratched :victory:
I got a replacement lens cover instead of the whole back. Cheaper to ship, easier to install.
@ Moandal
Does the middle chassis housing come with a lens cover already attached?
k-c
Sent from my GT-N7000 using Tapatalk 2
There are quite few listing for Lens cover on Ebay.com
Its priced around 4$ each... You have to open up the back housing and the lens cover is hold up in 3 points..
Use a philips head screw driver to lift them up and then replace it with a new one and lock down the 3 points...
Its so simple and easy to do
mine is also slightly scratched and unsure whether if changing the cover will improve the image quality
after, using the new 4.2 camera, photos are slightly sharper and more punchy, so still undecided
kinky-chinky said:
@ Moandal
Does the middle chassis housing come with a lens cover already attached?
k-c
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Yes it does, and since I couldn't separate the lens cover from the chassis I couldn't just replace the lens cover on its own.
ycs. said:
mine is also slightly scratched and unsure whether if changing the cover will improve the image quality
after, using the new 4.2 camera, photos are slightly sharper and more punchy, so still undecided
Click to expand...
Click to collapse
Scratches make quite a big difference in outdoor light. They diffuse the light and make the photo look washed out.
bondarun said:
There are quite few listing for Lens cover on Ebay.com
Its priced around 4$ each... You have to open up the back housing and the lens cover is hold up in 3 points..
Use a philips head screw driver to lift them up and then replace it with a new one and lock down the 3 points...
Its so simple and easy to do
Click to expand...
Click to collapse
Well it beats me how you did it! Even with my no-longer-required-and-so-not-afraid-to-break old chassis and a variety of small screwdrivers I cannot get the lens cover off. I can see the three lugs that hold it in, but I can't move them in any direction. Thankfully the entire chassis is pretty cheap anyway.
Moandal said:
Yes it does, and since I couldn't separate the lens cover from the chassis I couldn't just replace the lens cover on its own.
Click to expand...
Click to collapse
Thanks for the reply Moandal :good:
I think I'll be putting an order in for a new housing now.
Cheers.
One other thing, I take it I'll need special (small) screwdrivers to remove the screws. And any advice on the tool to use for prising off the old housing or will fingernails suffice?
k-c
Well, placed an order on 11th Nov, order still shown pending and no reply to recent enquiry I sent.
Not looking promising
k-c
Sent from my GT-N7000 using Tapatalk 2
Before ordering a replacement, try buffing the scratches out with a dab of white toothpaste.
bondarun said:
There are quite few listing for Lens cover on Ebay.com
Its priced around 4$ each... You have to open up the back housing and the lens cover is hold up in 3 points..
Use a philips head screw driver to lift them up and then replace it with a new one and lock down the 3 points...
Its so simple and easy to do
Click to expand...
Click to collapse
OK I've finally figured out how to do this. First of all you have to bend the three lugs in towards the centre from the inside of the housing - easiest with a small flat-headed screwdriver. Then you just have to push it out, although mine was lightly glued in. So now I have a spare!
kinky-chinky said:
Well, placed an order on 11th Nov, order still shown pending and no reply to recent enquiry I sent.
Not looking promising
k-c
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Any joy yet?
@ Moandal
Nope. No update on the pending status of my order & no reply to the message I sent.
k-c
Sent from my GT-N7000 using Tapatalk 2
I was able to change it with warranty.
I getting ready to sell my note1 and since my metal border as some small scratches, I just purchased a middle plate from CNN.CN. Probably about the same price with conversion to dollars. It will be like brand new once I change that. I always hate it when give them pictures and agree on the price, when you finally meet for the exchange they still try to ding you for the scratches you already showed them in pictures. Those people are almost as annoying as the low ballers who haven't seen a pic and are already offering half price.
kinky-chinky said:
Well, placed an order on 11th Nov, order still shown pending and no reply to recent enquiry I sent.
Not looking promising
k-c
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Same here... ordered on 12th nov and still pending...
@ _yupa_
sorry to hear you're in the same boat
@ gedster314
I used cnn.cn way back when I had to replace the keypad and housing on a SE K750. I'll have a look at them, thanks.
@ moandal
how long did your part take to arrive from dealrepairs.co.uk?
kinky-chinky said:
@ moandal
how long did your part take to arrive from dealrepairs.co.uk?
Click to expand...
Click to collapse
It took about 4 weeks.
I was OK with the top speaker being louder than the bottom, it still sounded pretty good and was nice and loud....
I'm OK with the screen having, what some people refer to as a "pink" or "green/yellow" hue to it... It's a gorgeous screen and unless I'm looking at it at an angle, it is fine.
Over the weekend I tried 3 different tempered glass screen protectors on it, and none of them would stick to the bottom right corner. I then read where some people had a "dent" or curve on the corners of their glass screen that was only really visible when you looked at a reflection in the glass...... Sure enough, my bottom right corner has a pretty good "distorted" image in the reflection. I can't see it or feel it when looking directly at the screen, but the reflection really shows it has an indention in it.
I spoke to Google and they are exchanging my phone for a new one.... I guess I'll examine it when it comes and chose the one that has the least defects? I love this phone and can live with a few little quirks, so I'm not ready to give up it just yet.
I have the same issue (top right corner), I have already unlocked, rooted the phone and I find it too much trouble to put everything back to stock and request a replacement. I don't know if they would send me a new or used unit. I have already purchased a plastic screen protector (haven't received it yet) and hoping that it would stick to the warped corner better than glass.
How the heck can one figure out there is a bump dent on one of the corners of the screen... Try to purchase good screen protectors may be?
Sent from my Nexus 6P
as he said in OP, just look at a reflection in the screen and see if the reflection is bent. my glass protector doesnt sit down on two corners either. waiting until i get a new one to take this one off
tele_jas said:
I was OK with the top speaker being louder than the bottom, it still sounded pretty good and was nice and loud....
I'm OK with the screen having, what some people refer to as a "pink" or "green/yellow" hue to it... It's a gorgeous screen and unless I'm looking at it at an angle, it is fine.
Over the weekend I tried 3 different tempered glass screen protectors on it, and none of them would stick to the bottom right corner. I then read where some people had a "dent" or curve on the corners of their glass screen that was only really visible when you looked at a reflection in the glass...... Sure enough, my bottom right corner has a pretty good "distorted" image in the reflection. I can't see it or feel it when looking directly at the screen, but the reflection really shows it has an indention in it.
I spoke to Google and they are exchanging my phone for a new one.... I guess I'll examine it when it comes and chose the one that has the least defects? I love this phone and can live with a few little quirks, so I'm not ready to give up it just yet.
Click to expand...
Click to collapse
I had the exact same problem and at this moment another one is being sent to me. I love tempered glass but with it like this I can't use one because it Pulls up on the bottom right side corner.
I just got a replacement supershieldz TGSP but I am not going to put it on. I know that since the problem is with the screen it won't fit either. Originally I had requested for a refund but seller thought I am asking for a refund due to it not having proximity sensor cutouts. I am not seeing any point in putting it on and finding out that it has the same issue where one end sticks up and separates from the screen. I am now in search of a plastic protector preferably wet application so that its flexible enough to stay put.
enaybee said:
I just got a replacement supershieldz TGSP but I am not going to put it on. I know that since the problem is with the screen it won't fit either. Originally I had requested for a refund but seller thought I am asking for a refund due to it not having proximity sensor cutouts. I am not seeing any point in putting it on and finding out that it has the same issue where one end sticks up and separates from the screen. I am now in search of a plastic protector preferably wet application so that its flexible enough to stay put.
Click to expand...
Click to collapse
Yeah, my replacement 6P is gonna be here tomorrow... If the TGSP doesn't work, then I'll just keep it and put a "wet", flexible screen protector on it as well.
Folks getting replacements: can you let us know how Google handled that? Referb/new, full/partial packaging, etc?
Much appreciated.
Elnrik said:
Folks getting replacements: can you let us know how Google handled that? Referb/new, full/partial packaging, etc?
Much appreciated.
Click to expand...
Click to collapse
The charge your card for replacement device, release charge when you send original device back. New devices.
Elnrik said:
Folks getting replacements: can you let us know how Google handled that? Referb/new, full/partial packaging, etc?
Much appreciated.
Click to expand...
Click to collapse
My nexus protect was also updated with the new IMEI.
Elnrik said:
Folks getting replacements: can you let us know how Google handled that? Referb/new, full/partial packaging, etc?
Much appreciated.
Click to expand...
Click to collapse
Just received my replacement... It came new, in the box with everything.
The screen appears to be a little more "flat".... But my TSGP is already in the trash and the replacement isn't here until Friday or Monday, so I won't know how it fits until then.
nrfitchett4 said:
The charge your card for replacement device, release charge when you send original device back. New devices.
Click to expand...
Click to collapse
thephatness said:
My nexus protect was also updated with the new IMEI.
Click to expand...
Click to collapse
tele_jas said:
Just received my replacement... It came new, in the box with everything.
The screen appears to be a little more "flat".... But my TSGP is already in the trash and the replacement isn't here until Friday or Monday, so I won't know how it fits until then.
Click to expand...
Click to collapse
Thanks all! I find it is good to have this info for people worried about how replacements are handled. I appreciate it.
tele_jas said:
Yeah, my replacement 6P is gonna be here tomorrow... If the TGSP doesn't work, then I'll just keep it and put a "wet", flexible screen protector on it as well.
Click to expand...
Click to collapse
How long did it take them to ship the new one and did you have to pay shipping or was it free?
T_VASS said:
How long did it take them to ship the new one and did you have to pay shipping or was it free?
Click to expand...
Click to collapse
It took 4 days to process and then it was over-nighted at no additional charge.. About 6 days total.... My 2nd replacement was ordered on Saturday morning and shipped out today, FedEx ground at no charge.
2nd replacement is due to a lose component inside rattling around.
enaybee said:
I just got a replacement supershieldz TGSP but I am not going to put it on. ...
... I am now in search of a plastic protector preferably wet application so that its flexible enough to stay put.
Click to expand...
Click to collapse
I just wanted to share some updates. I tried a wet application Skinomi on my phone. they must have changed the formula of their plastic as its too soft now. Every time I hit the screen with something (fingernail, keys or anything else) it would leave a permanent dent on the screen protector that would not heal even after many days. I didn't see this behavior back when I had Nexus 5 with Skinomi applied on it.
Anyways, since I mentioned before that I did get a replacement TGSP from Supershieldz and never used it. Tonight I put it on the phone and to my surprise it sticks to the screen fully covering it 100%. Even the dented area is showing sticking unlike before. I don't know what changed but my phone screen is definitely the same.
Just wanted to share it in case if anybody else with dented screen doesn't wanna try a TGSP, give it another shot you might get lucky like me.