Database Users

Wizard O2 MMS Setting

Hello,
Is there anyone using the corporate mode and not able to send MMS ? I've been trying to change and figure the setting on my device. It seem to be not able to send MMS.
If there is someone using the corporate mode and able to send MMS please send me the configuration.
Many Thanks.

Are you using a contract line? if you are try this file. Hopefully it'll solve your problem.

Hello,
No luck, I still not able to send mms.
Are you in the corporate mode as well?

Hi Waiho,
i had this problem, what i had to do was hard reset and install it with all the O2 rubbish. I then wrote down all the details which were stored. Then hard reset in corporate mode and put the details in. Is bit lengthy but neccessary. Sorry i dont have my phone on me at the mo so can even give the details from mine.

mms disappeared
i had the problem of not seeing mms inbox because of not loading the extended rom from t Mobile.
I found out that with total commander you can go to the files in the extended rom and there i needed to execute a file called shortcut_mms1_java6xx-cv-voice-emailwiz-tmo-03nov05.cab to make it work
only need to enter the provider settings now

Hi Enervate,
Do you mind to send me the config detail ?
Thanks!

Use Basic ?
If you use the Basic setting after a hard reset (or Clear Storage) you get the MMS settings OK. Otherwise contact O2 Care and they will send you the settings.
DBo.

Hi Waiho,
ill try and post the settings tonight sometime, am at work at the mo so dont have my phone on me.

Below are the O2 XDA Mini S MMS Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Select 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'MMS Configuration'
5. Select 'Servers'
6. Select 'New'
7. Type in Server name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'Connect via' and select 'My Work Network''
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set As Default'
The MMS settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.

if you have hard reset in corporate mode, you will also need to enter your GPRS settings, otherwise the MMS cant dial out, ill have these for you tonight

I had them all e-mailed to me yesterday, so I have them handy. Here you go:
Below are the O2 XDA Mini S GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
The GPRS WAP Pay Monthly settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.

street_hawk said:
I had them all e-mailed to me yesterday, so I have them handy. Here you go:
Below are the O2 XDA Mini S GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
The GPRS WAP Pay Monthly settings are now complete. However if you are still experiencing any issues using this service, please contact O2 Customer Services.
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.
Click to expand...
Click to collapse
Thanks For the Information.
I have the exactly setting like above.
The only different make my device able to send MMS is remove :8002 port at the [MMS configuration] but im not able to receive my MMS without putting the port back.
Is really strange.
Guys really thanks for the help....
Is there any other way?

Can Someone post the O2 MMS CAB files ? My MMS INBOX IS not there after I have upgrade.
Thanks.

Has anyone got the settings for pay as you go i can't connect to the internet with my settings. :?
Thanks.

How to send mms o2 xda mini s

Hey could anyone please tell me how to send mms on the o2 xda mini s. I think iv got the settings correct but every time I try to send it just saves to the out box

Talk to your customer services people... its possible mms is not active for your number...
You might try talking to the tech support team if possible.... they might check the settings on your xda

Thanks bud. il give them a ring.

all the settings can be found on filesaveas.com
depends whether you are contract or payg. I think all new sims accounts are mms enabled. It took me a little while to get my payg sim to send mms in the mini s but found a walkthru on the expansys board in the end
http://www.expansys.com/forumthread.asp?code=129999&thread=27
the problem is you need to set up your gprs wap connection 1st then point the mms connection to use this wap connection to send/receive. I think thats the case anyway. If you have any probs let me know and i'll try to take you thru all my settings.

Im having the same problems.
I have phoned them 3 times asking what the problem was and they kept trying to tell me it was my settings, until one day they said they hadnt set itup on my account. They trhen said it would take 24hours .... that was 3 days ago !!!
Anyhoo, they sent me these emails wit hthe settings required for the CONTRACT settings :
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
Code:
Below are the O2 XDA Mini S MMS Pay Monthly Settings
1. Select 'Start'
2. Select 'Messaging'
3. Select 'Menu'
4. Select 'MMS Configuration'
5. Select 'Servers'
6. Select 'New'
7. Type in Server name or 'O2 MMS'
8. Select 'Gateway' and type in '193.113.200.195'
9. Select 'Port number' and type in '9201'
10. Select 'Server address' and enter 'http://mmsc.mms.o2.co.uk:8002'
11. Select 'Connect via' and select 'My Work Network''
12. Click 'OK'
13. Highlight 'O2 MMS' and click on 'Set As Default'
Code:
Below are the O2 XDA Mini S GPRS WAP Pay Monthly Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘wap.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘o2wap’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
HTH

cool! thanks for the help!

Anybody who has Smart MMS Settings for WM6 Hermes?

Anyone who has the cab settings or the manual procedure?

If you have no luck here, contact Smart and they should be able to send them to your phone.
jenellej said:
Anyone who has the cab settings or the manual procedure?
Click to expand...
Click to collapse

Or, can always google Smart GPRS or Smart MMS. You should find all the configurations online.... this is assuming you know how to setup GPRS and MMS (in WM5 or WM6) in general.....

HTC MMS settings
Download HTC.COM new for WM6 (use the S710 file) works for Hermes WM6

HTC.COM use de File for the S710 works for Tytn Hermes WM6

Where do i download this file? Do you have the direct link?

http://www.europe.htc.com/support/software/htcs710.html
cheers

GPRS Settings
Go to Settings> at the bottom tap Connections>Inside it tap another Connections> then Advanced> Select Network> Under Network Management -" In My ISP" - tap NEW> Under "MY ISP Name" – set to SmartInternet > tap MODEM at the bottom,> tap" New" ,> Under Make a New Connection - Enter a new connection name (SmartInternet) , Under Select a modem - tap " cellular line (GPRS, 3G)", then "Next" > Under Access Point name enter – internet then next > at the next page leave the Username, Password, Domain Blank and hit Finish. Try now to connect using Pocket IExplorer
MMS Configurations
Go to Settings> at the bottom tap Connections>Inside it tap another Connections> then Advanced> Select Network> Under Network Management -" In My ISP" - tap NEW> Under "MY ISP Name" – set to SmartMMS > tap MODEM at the bottom,> tap" New" ,> Under Make a New Connection - Enter a new connection name (SmartMMS) , Under Select a modem - tap " cellular line (GPRS, 3G)", then "Next" > Under Access Point name enter – mms then next > at the
next page leave the Username, Password, Domain Blank and hit Finish Go back to the network management again and select whatever you wrote for "GPRS connection " > ok
2. Go to Start >Messaging> Menu - Under menu select MMS Configuration > at the next page bottom tap "Servers" > then tap New > Fill up the following
Server Name : SmartMMS
Gateway : 10.102.61.46
Port Number : 8080
Server Address : http://10.102.61.238:8002
Connect via : to whatever you enter in Network
Management area for MMS connection
Sending Size : 100K or try 250 K
Wap Version : Try either 1.2 or 2.0
>>Tap OK
this is for xda exec but im sure it can be used for hermes. hope this helps

02 GPRS

Does anyone know the GPRS setting for 02 PAYG UK sim cards?
Thanks.

hi,
I have also posted a thread asking for the settings but no luck at all, the only way so far is to pay for dial up

o2 GPRS setting for PAYG
Try This: http://www.filesaveas.com/o2wap.html
Good Luck

These settings will allow you to access the whole of the internet on your phone using PAYG, as currently you cannot access any site except google.com and o2.co.uk. If i was you i would sign up for the 7.50 a month unlimited browsing bolt on(Not actually true as you are limited to 200mb a month). You should get 1mb free a month, but as you will find out 1mb doesnt last very long,if you go browsing, i would say it would be good for about 5 pages then its gone and you will be paying top wack for the internet.
Please note that only Mobile Internet Explorer will work with these settings, you will not be able to use or access Mobile MSN or Outlook as these are not supported.
• Go to Start > Settings > Connections > Advanced (Tab) > Select Networks (Button)
• You should now be on a screen titled “Network Management”. Now select both drop boxes to “My Work Network” then tap OK
• You now need to tap the Tasks tab and then the “Manage existing connections” link
• From here, tap the New button
• Name the new connection “O2 GPRS” and select modem as “Cellular Line (GPRS)” then tap Next
• You will now asked for the Access point name, here you should enter: “payandgo.o2.co.uk”, then tap Next
• You will now be asked for the username and password. The username is “payandgo”, and the password is “password”
• Ignore the Domain box and ignore the Advanced button, just tap Finish
• You will now be presented with a screen with your connections listed. Simply tap “O2 GPRS”. (There will now be a dot besides the name “O2 GPRS”. There may be other connections, you can delete if you wish. You also may have an “Auto pick” option, do not select this)
• You now need to tap the Proxy Settings tab
• On this screen you need to make sure that both the “This network connects to the Internet”, and “This network uses a proxy server to connect to the internet” tick boxes are both ticked
• In the Proxy server box below the tick boxes, enter: “193.113.200.195”
• Now tap the “Advanced” button
• Tap HTTP, enter server as “193.113.200.195”, port: “8080”, tap OK
• Tap WAP, enter server as ”193.113.200.195”, port: “9201”, tap OK.
• Leave Secure WAP blank (if there is anything in this entry, delete it)
• Tap Socks, enter server as “193.113.200.195”, port: “1080” and the type as “Socks 4”, then tap OK
• Tap OK 3 more times. Then tap X
• Now launch Mobile Internet Explorer to test the new settings

worked a treat, thanks mate.

help setting up mobile internet (wap/gprs)

Hey guys.
Can someone help me out with this...
I had a tmobile MDA (wizard), i have since upgraded to the Kaiser. But my mum wants to use the old wizard. The wizard is already unlocked (lokiwiz yay) so i just put my mums O2 sim in the phone and it works. But things like going online won't work, i assume i need to enter some settings somewhere. (which settings and where???)
I tried ringing O2 to get the info, but they started asking what phone i had and then they said they didnt have the MDA/Wizard, and so i said a sony erricson just so that she would send info, but when i recieved the text message it was blank or at least appeared blank.
Can someone from here tell me which settings i need to enter and where.
Also i am still running the wizard on the tmobile rom (second one they made for MDA). is there a better rom for me to use.
Thanks guys.

MrPresident said:
Hey guys.
Can someone help me out with this...
I had a tmobile MDA (wizard), i have since upgraded to the Kaiser. But my mum wants to use the old wizard. The wizard is already unlocked (lokiwiz yay) so i just put my mums O2 sim in the phone and it works. But things like going online won't work, i assume i need to enter some settings somewhere. (which settings and where???)
I tried ringing O2 to get the info, but they started asking what phone i had and then they said they didnt have the MDA/Wizard, and so i said a sony erricson just so that she would send info, but when i recieved the text message it was blank or at least appeared blank.
Can someone from here tell me which settings i need to enter and where.
Also i am still running the wizard on the tmobile rom (second one they made for MDA). is there a better rom for me to use.
Thanks guys.
Click to expand...
Click to collapse
Unfortunately, the sim card controls the internet, texting, and online accesses. By putting your mom's O2 sim in your old wizard doesn't change anything. These sim cards have numbers on them to identify them with the type of device activated for. What you need to do is contact your carrier and explain to them what you said in your post, and get the sim re-activated.

Thanks for the help hotdog.
I'll ring the O2 people again and explain things. Only reason i didn't go into depth with them before was because i thought they would tell me im not allowed to use an O2 sim in an unlocked Tmobile phone.

i have the pay and go settings!!!!
heres the pay and go settings for you with guide. i hope it helps if not at least u'll be able to get the net via wap. let me know if u want the mms settings via privet message.
Below are the O2 XDA Mini S GPRS WAP Pay as you go Settings
Please ensure that when entering 'O2' into the settings that the letter 'O' is selected and not a zero.
1. Tap Start
2. Tap Settings
3. Tap the Connections tab
4. Tap the Connections icon
5. Under 'My Work Network' tap 'Manage existing connections'
6. If a connection already exists then tap ‘Edit’. If no connections are present tap 'New’
7. In the ‘Enter a name for the connection’ field enter ‘GPRS WAP’
8. The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
9. Tap 'Next'
10. In the ‘Access Point Name’ field enter ‘payandgo.o2.co.uk’
11. Tap 'Next'
12. In the ‘Username’ field enter ‘payandgo’
13. In the ‘Password’ field enter ‘password’
14. Leave the Domain field blank
15. Tap ‘Advanced’
16. In the ‘TCP/IP’ tab ensure ‘Use server-assigned IP address’ is selected
17. Tap the ‘Servers’ tab
18. Ensure the ‘Use server-assigned address is selected
19. Tap ‘OK’ in the top right corner
20. Tap 'Finish'
21. Tap 'Proxy Settings' tab
22. Ensure that 'This network connects to the Internet' box is ticked
23. Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
24. Tap 'Advanced'
25. Tap the ‘WAP’ option
26. In the 'Server’ field enter ‘193.113.200.195’
27. In the ‘Port’ field enter ‘9201’
28. Tap 'OK' four times to exit
Pay monthly settings for you
Go to [Start]
Tap [Settings]
Tap [Connections]
Under [My ISP] tap [Manage Existing Connections]
Tap [Edit]. If this is not present tap [Add a new modem connection]
The [Select a Modem] drop-down box should be set to: [Cellular Line (GPRS)]
Tap [Next]
The [Access Point Name] should be set to: mobile.o2.co.uk
Tap [Next]
The [Username] shouldbe set to: o2web
The [Password] should be set to: password
Leave [Domain] blank
Tap [Advanced]
On the [TCP/IP] tab, only [Use Server-assigned IP Address] should be selected
Tap the [Servers] tab
Select [ Use Specific Server Addresses]
DNS: 193.113.200.200
Alt DNS: 193.113.200.201
Tap [ok]
Tap [Finish]

god bless you vj4.
that worked like a charm.
thanks.