I`ve recently damaged very bad my artemis after installing an rom. now he is not booting and not starting, i don't know if he is charging. when i plug-in him to computer the red light is turn on (from the picture) for a couple of seconds after that nothing. wmdc is not finding the phone if i try reinstall the windows. Please help me!!!! What should i do? What should i change?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I haven't tried it myself but I have read on one of these pages you can flash it back to the default rom using an sd card.
First I would say just try charging it using the standard charger ... leave it for a few hours.
You then need a micro sd card (not micro sdhc) download the manufacturers rom (has to be the manufacturers version i.e. O2) to the sd card don't have anything else on the card.
Boot the phone into bootloader mode ... I think you hold the power and voice buttons at the top and then press the reset button, hold onto the buttons and it should eventually load into boot loader and I think it just loads the rom straight off the card.
You can find more details on doing this in the forum. Let us all know how you get on.
Hope that helps.
Tanks for the replay, but i allready know about SD method. I cannot do that because i do not have an 256 mb or another htc to modify the sd card (get ready for boot by resizing him on the computer). can anyone help me?
same problem
I have the same problem. do not start and the red light in the right.
Related
Hello have a Rogers Magic 32 A and not much success at all with an ROM update (actually have a 1.6)
Rooted it, got a while a go some Updates on it as you can see SPL, RADIO
In SDK it looks fine, its in the device manager w/o an error , Mounting the SD card is fine too
But as soon i want do anything like Fastboot, adb or run a RUU Rom file "no conection via USB, or waiting on device" Even i still can see the SD card in the explorer.
What is there wrong or what did I wrong Thanks a lot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.flickr.com/photos/[email protected]/5341092370/
http://www.flickr.com/photos/[email protected]/5341092396/
http://www.flickr.com/photos/[email protected]/5341092444/
randyrubb said:
Hello have a Rogers Magic 32 A and not much success at all with an ROM update (actually have a 1.6)
Rooted it, got a while a go some Updates on it as you can see SPL, RADIO
In SDK it looks fine, its in the device manager w/o an error , Mounting the SD card is fine too
But as soon i want do anything like Fastboot, adb or run a RUU Rom file "no conection via USB, or waiting on device" Even i still can see the SD card in the explorer.
What is there wrong or what did I wrong Thanks a lot
http://www.flickr.com/photos/[email protected]/5341092370/
http://www.flickr.com/photos/[email protected]/5341092396/
http://www.flickr.com/photos/[email protected]/5341092444/
Click to expand...
Click to collapse
Well... one problem that you're having is that you failed to post in the right section. I'll move it for you but next time I'll trash it instead. Fair warning.
Second thing is that those images aren't showing up. When I tried to click a link it says that I have to be signed in. Sorry... but I'm not planning on working that hard to help you out at this point. Too busy.
Plugged my phone into my computer to grab some files today, and I found this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone have any idea what this is, or should I just go call an exorcist?
seems ur phone's sdcard or external sd card is infected.
there are two alternates::
1) scan ur memories with antivirus by connecting it with pc and after that reset ur phone)
or
2)format both ur memories.
Make reset of ur phone ( go to settings/privacy/factory reset)
Hopefuly ur problem ll be gone. Nd next time make sure to ask questions in question answers sub forum
or should I just go call an exorcist?
Click to expand...
Click to collapse
Only if he is good in formatting a SD card Because there is just 'something' corrupt...
Try to back up everything, (maybe trough your phone?)...
If that doesn't work try to do the error check (properties>hardware>scan voor errors)...
If that doesn't work you can format the disk (not quick!), and the problem should be solved
I should also mention that the SGS in question is Bell's i9000m... Maybe the internal SD is about to fail?
that definitely looks like a corrupted SD card
you can try to reformat it, and see how much longer it'll live until it dies completely
Aw damn, I forgot to knock on wood. Internal SD is dead again, second SGS. ):
As title states, a friend of mine asked me to try and fix his S1, first of all I boot to download mode (both 3 key & JIG work), and flash a few ROMS in ODIN, but the same thing, it stuck in boot screen, I tried bit 3 files & PIT, with repartition and without, nothing. Also I can't boot into recovery mode, I then open the device to check for any corrosion, but it's clean as a baby ass, then I disconnect the internal battery and connect back, but still no news, also it do charge the battery but not show it on the screen :
CHARGE:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
BOOT:
Any help is more then wellcome :good:
hmm which Roms did you flash? Have you tried a Stock Rom? Or put the battery out for a few hours and then try again. Does the battery have enough power? happend to me one time xD
I flashed only stock GB ROMS, the battery indeed have enough power (the phone not boot, but the charging functionality are still in tact, I double checked it with a multimeter), I also cant be sure if there is a problem with the internal memory as it not boot pass the opening screen.
maybe there a safemode? or a fastboot solutions? I tried to repartitions an uSD card to 2GB EXT4 + FAT32 the left space, then flash wit ODIN, but it no write any data on the uSD...
Hi!
i have got a 5.11 1024x600 erisin es4046 HU.
I installed Malaysk custom rom after first reboot it wont boot anymore.
meens that the screen is black.
i cant boot to recovery menu.
have u any idea ?
thx in advance
http://forum.xda-developers.com/showpost.php?p=67184851&postcount=50
first thank you for your answer. i forgot to say that i have done it before i posted this thread.
if i start update with sdcard i got following message.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after i choose point 4 to install from usb i got following message.
has it something to do that i have rooted my device before i tried to install malaysk ??
have u got a solution for my problem ?
thanks in advance.
greetz
So i had the same kinda issue, i reformatted my SD card with partition magic and then was able to boot from it.
midcrim said:
So i had the same kinda issue, i reformatted my SD card with partition magic and then was able to boot from it.
Click to expand...
Click to collapse
i can boot from it as you can read in message.. ple remove sd card...
Hello,
I have an Erisin ES4046 with the original firmware and I would like to know if it was possible to change the assignment of the right button of the car radio when using the FM tuner?
Currently, the right button is used to navigate through the memories of the memorized radio stations. I would like to know if it is possible to assign this button to the setting of the radio frequency?
Thank you
A +++
I'm ready to buy your 4046. Let me know
Hi Mods and DEVS, Please help!!
Yesterday i updated to the latest over the air update for my asus max Pro m1. The file got downloaded successfully and I clicked on the dropdown icon to install the update.
Then it started installing and the bar was also being displayed as in progress. But after that it immediately showed error as in the 1st attachment.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then, to resolve it, I manually downloaded Version WW-15.2016.1902.340 zip file from Asus to my external sd card.
1. Inserted the card into my phone, now on the screen, I clicked on "Apply update from external storage" and then went to the storage location and clicked on the .340 zip file.
The message shown is as below in the 2nd attachment.
After this nothing happened - it stayed on the same page and did not even restart. I manually clicked on "Reboot system now"
But after I did that , still the 1st error is there. I cannot even switch on the phone to go to the home screen.
If i insert an usb cable and connect to a computer, internal memory/sd card of the phone is not accessible. It does not show at all in the computer.
My work data is in the phone and i cannot risk it deleting it as i have not taken a backup. I am a newbie as well to this field of modifying/manually installing updates to the phone.
Please, I request yours' help here!!
Please!!
Specify every details of your phone. Build, root or non root etc. Also mention the tweaks that you've fine if any. Do this for better chances of getting proper fix.
I don't know the fix anyway