is it possible
any brother can made a HTC sense cab for uni
adius1234 said:
is it possible
any brother can made a HTC sense cab for uni
Click to expand...
Click to collapse
Well i doubt it... unless it is just a theme like a spb theme... real sense will eat more ram... say may be 80+ and uni comes with 64mb and if upgraded max 128mb so still it's not enough to run real sense ....... the the only hope would be to use theme which looks like sense...
HTC sense will not on Uni. It is a HW 3D driven UI.
The new M2D is close to Sense but it is made for HTC Mega, which is a QVGA device. If someone willng to port it for VGA...
tomal said:
HTC sense will not on Uni. It is a HW 3D driven UI.
The new M2D is close to Sense but it is made for HTC Mega, which is a QVGA device. If someone willng to port it for VGA...
Click to expand...
Click to collapse
That would be wonderful!!
This would not work?
->
http://forum.xda-developers.com/showthread.php?t=584978
Of course, somebody would have to cook a WM6.5 ROM for UNI with that ;-)
chequer said:
This would not work?
->
http://forum.xda-developers.com/showthread.php?t=584978
Of course, somebody would have to cook a WM6.5 ROM for UNI with that ;-)
Click to expand...
Click to collapse
It is M3D and will not run on Uni.
tomal said:
The new M2D is close to Sense but it is made for HTC Mega, which is a QVGA device. If someone willng to port it for VGA...
Click to expand...
Click to collapse
Well Master tomal can be bit specif what thing is involved in porting... i'm good at modifing the dll, images but my knowledge of coding is zero.. if it's only dll's and images i might take a shot at it...
Related
Is there any way to transform the Polaris exactly as the Diamond? all these roms available doesn't seem to do that!
armandopellegrino said:
Is there any way to transform the Polaris exactly as the Diamond? all these roms available doesn't seem to do that!
Click to expand...
Click to collapse
wtf's up with the mad face
so much anger and so little intelligence...
If it was possible at the moment..to get polaris to be like diamond, I can assure you that this forum would have it.
armandopellegrino said:
Is there any way to transform the Polaris exactly as the Diamond? all these roms available doesn't seem to do that!
Click to expand...
Click to collapse
Armando we will give you the benefit of the doubt since that was your first post.
Diamond runs at 520mhz and Polaris only at 400mhz. If everything could be ported then we would have an even slower Polaris. So the best is to have a fast look alike than a slow true fake. Don't you agree? Anyway you could try the pdamobiz roms with a flo3d replacement.
if you want a Diamond then go buy one.. gezzz you can't please everyone i guess.
Does anyone know if the the HD will be compatible with the new TF3d? If im not mistaken HTC usually updates the phones when a new version of its UI comes out, but has there been any official word for the HD?
I like the HD, but the new UI (particular the contacts) is so much better than the vanilla wm6.1 version.
Firann said:
Does anyone know if the the HD will be compatible with the new TF3d? If im not mistaken HTC usually updates the phones when a new version of its UI comes out, but has there been any official word for the HD?
I like the HD, but the new UI (particular the contacts) is so much better than the vanilla wm6.1 version.
Click to expand...
Click to collapse
The answer is a definite yes.
Check out Dutty's 1.8 Extreme ROM, he already has the HD running on the new version of TF3D I've been using it for a few days now and it's very good..
TF3d v2 only
Is it possible to get only the TF3D v2 cab?
jcarreira said:
Is it possible to get only the TF3D v2 cab?
Click to expand...
Click to collapse
no, currently you have to flash Dutty's rom
Sweet thnks for the reply guys this makes the decision on getting the HD much easier
yeah, but the cab would be cool
my question is.. if dutty have the new tf3d on his rom, where did he found these files?
and we are not able to find it?
foaf said:
yeah, but the cab would be cool
Click to expand...
Click to collapse
Yeah that would be cool. Can someone make a cab?
pitt1983 said:
my question is.. if dutty have the new tf3d on his rom, where did he found these files?
and we are not able to find it?
Click to expand...
Click to collapse
A wild guess: He has access to a Diamond 2 or Touch Pro 2 ROM The hardware of the HD is practicaly identical as well as the screen resolution so porting if any would be limited to disabling any eventual hardware checks for the particular device.
Have you ever wondered how we already have WinMo 6.5 for our devices while it's still at least 6 months away from market It was the same with 6.0 and 6.1
Anyone found a CAB for the TF3D V.2 for the HD? I don't want to flash my ROM, I haven't done it before and I am a bit iffy about it as I may lose everything on my phone with an hard reset. Anyone out there?
Bump! Anyone can help?
cocoaju said:
Anyone found a CAB for the TF3D V.2 for the HD? I don't want to flash my ROM, I haven't done it before and I am a bit iffy about it as I may lose everything on my phone with an hard reset. Anyone out there?
Click to expand...
Click to collapse
I see what you mean, I would like to have it also!
I guess we just have to flash our ROMs. LOL.
As far as I know, there are no cabs for TF3D V.2 (manila v3) and there aren't any in the making (and there won't, as I don't believe it's possible to intergrate the neccessary changes without cooking them into the ROM).
If you want it, you're gonna have to flash to a cooked ROM (or maybe an htc ROM if they choose to ever release one).
Sorry
I now know. If it was available, I am sure the cheifs here would of done one already. I just don't understand why HTC won't update these UIs for free. Free upgrades to the newest TF3D will be great and will create more loyal users. As most users won't change their phones every year. They will feel happier if they can just update the UI and use it as a new phone once in a while. I think free upgrades for phones up to 3 years old is a cool idea.
Hi.
I´m using the Touch Diamond 1 and i like it a lot. But, under the TouchFlow 3D the Win Mobile is seen far to often and it´s not very nice...
So, I read that Touch Diamond 2 is going much deeper i the TouchFlow 3D, even so much that you must look very hard to see that there´s a Win Mobile.
I was wondering if there is any possibility to install the TF3D from Diamond 2 into Diamond 1?
Thanks.
Hey,
Correct me if im wrong, but arnt they doing that atm ?
nrg rom
deep shining
And all the others i dint mention ,.,. lol
Look for a manila topaz-rhodium ROM...
Try a hard reset?
ArtieQ said:
Try a hard reset?
Click to expand...
Click to collapse
...Why? lol.
Install the Manila 2.1 VGA port (in development and hacking) or install a custom ROM that has it.
Gen.Y, EnergyROM etc.
donald-c said:
...Why? lol.
Install the Manila 2.1 VGA port (in development and hacking) or install a custom ROM that has it.
Gen.Y, EnergyROM etc.
Click to expand...
Click to collapse
Wrong topic, lol..
donald-c said:
...Why? lol.
Install the Manila 2.1 VGA port (in development and hacking) or install a custom ROM that has it.
Gen.Y, EnergyROM etc.
Click to expand...
Click to collapse
go for ROM that has it ready on it , better
I have both D1 and 2, and D2 is a definitely faser and smoother for hardware reason.
Here's the thread for the manila 2.1 (Touchflo 3d 2)
http://forum.xda-developers.com/showthread.php?t=542113
for the cookers ,is it posseble to intergrate M2D 2.5 in to wm 6.1 i have seen this on the forum with diamond see link http://forum.xda-developers.com/showthread.php?t=565078 tel me can it be done
carpintero said:
for the cookers ,is it posseble to intergrate M2D 2.5 in to wm 6.1 i have seen this on the forum with diamond see link http://forum.xda-developers.com/showthread.php?t=565078 tel me can it be done
Click to expand...
Click to collapse
- All the versions of M2D 2.5 are for VGA or WVGA resolutions.
- I did not find any version for QVGA which is the resolution of Elfin/Elf.
- I guess some one has to either port these to QVGA or we have to wait till QVGA version is released in QVGA phone (that probably has a new WM 6.5 kernel).
- Unfortunately, the porting involved here looks to be a huge task in itself.
thanks for the explanation
chota_shivaji said:
- All the versions of M2D 2.5 are for VGA or WVGA resolutions.
- I did not find any version for QVGA which is the resolution of Elfin/Elf.
- I guess some one has to either port these to QVGA or we have to wait till QVGA version is released in QVGA phone (that probably has a new WM 6.5 kernel).
- Unfortunately, the porting involved here looks to be a huge task in itsel
Click to expand...
Click to collapse
i'd like to see a rom like this...
crapula512 said:
i'd like to see a rom like this...
Click to expand...
Click to collapse
the porting work is already in process. you van have a look here. its done by pcarvalho, one of the xda's on his polaris. http://www.youtube.com/user/pcarvalho7xda#p/u/2/tUsN79tXGUk
crapula512 said:
i'd like to see a rom like this...
Click to expand...
Click to collapse
i'd like to see a rom like this (2)...
the video is 2.1 not 2.5, any way i have tested both on my topaz and i prefer 2.1, the question is has the touch 3D capabilities? we are talking about touch flo 3D
Hi all
Since this is a chefs corner,i would like to know from the masters,how can I port manila 2.1 or 2.5 to QVGA device.there must be a way atleast to start with.who knows some guru can make it and create it for the least talked QVGA.
any help,link,guidence will be highly appreciated by all the chefs and user of QVGA devices.
regads
I don't think that will work it is simply to small .
ceesheim said:
I don't think that will work it is simply to small .
Click to expand...
Click to collapse
if a plain WM 6 can be restructured as WM 6.5 by developers,i am sure manila can also be ported to QVGA.all we need modifying the dll and the manila.but how?
All That Is Manila ...
You'll need this, make sure to check Post 8 of the thread as well:
[KITCHEN][09.03.2010]Manila CMD Kitchen Environment
http://forum.xda-developers.com/showthread.php?t=528548
Here is where the "k00l Manila kids" hang out:
TouchFLO/Manila/SenseUI
http://forum.xda-developers.com/group.php?groupid=131
hilaireg said:
You'll need this, make sure to check Post 8 of the thread as well:
[KITCHEN][09.03.2010]Manila CMD Kitchen Environment
http://forum.xda-developers.com/showthread.php?t=528548
Here is where the "k00l Manila kids" hang out:
TouchFLO/Manila/SenseUI
http://forum.xda-developers.com/group.php?groupid=131
Click to expand...
Click to collapse
thx for ur kind help.i am sure those link will help me and others towards the first step towards my motive of this thread
regards
Manila development
here is another link for the development of manila for beginners. http://forum.xda-developers.com/showthread.php?t=642890
hope it will help somebody who is new but talented to deal with the process of making manila
regards
deepankerjha said:
Hi all
Since this is a chefs corner,i would like to know from the masters,how can I port manila 2.1 or 2.5 to QVGA device.there must be a way atleast to start with.who knows some guru can make it and create it for the least talked QVGA.
any help,link,guidence will be highly appreciated by all the chefs and user of QVGA devices.
regads
Click to expand...
Click to collapse
simple question...
1st off what device?
2nd how much ram/rom?
hardware specs must be met before any effort is made or its just wasted time...
and since my polaris doesn't have enough ram/rom to handle it i cant port it...
its built for powerful devices for a reason...
cheers
pcarvalho said:
simple question...
1st off what device?
2nd how much ram/rom?
hardware specs must be met before any effort is made or its just wasted time...
and since my polaris doesn't have enough ram/rom to handle it i cant port it...
its built for powerful devices for a reason...
cheers
Click to expand...
Click to collapse
Based on his signature, I'm gonna dare say he is aiming for the Nike, but he might have meant for all QVGA devices.
egzthunder1 said:
Based on his signature, I'm gonna dare say he is aiming for the Nike, but he might have meant for all QVGA devices.
Click to expand...
Click to collapse
exactly bro.i meant for all QVGA ...I am already trying.i may fail in my mission...but y not give a try
regards
How about this one: [.netCF 3.5] Sense Interface SDK v1.1 [HTC's Sense UI Look 'n Feel] Look here.
Good luck!
Lewy1 said:
How about this one: [.netCF 3.5] Sense Interface SDK v1.1 [HTC's Sense UI Look 'n Feel] Look here.
Good luck!
Click to expand...
Click to collapse
looks interesting mate,thx for the link
deepankerjha said:
exactly bro.i meant for all QVGA ...I am already trying.i may fail in my mission...but y not give a try
regards
Click to expand...
Click to collapse
if you do a search on m3d qvga, you will see that it was ported a long time ago the problem is missing needed hardware/drivers...the phone wont go into sleep mode best i can remember. seems to me like you could test it on your device even without it ported just to see if it would run(dont think it will correctly)...try vga sense and see what happens.
Lewy1 said:
How about this one: [.netCF 3.5] Sense Interface SDK v1.1 [HTC's Sense UI Look 'n Feel] Look here.
Good luck!
Click to expand...
Click to collapse
that is manila SDK for writing applications in .net, not a build of manila.
twopumpchump said:
that is manila SDK for writing applications in .net, not a build of manila.
Click to expand...
Click to collapse
Thanks. I was fully aware of that. My point is that using that one should be able to achieve more or less the same result that we would have by porting Manila 2.1 or 2.5.
the guys at lg-incite.com are porting it to wqvga if anyone is interested.
leemoss84 said:
the guys at lg-incite.com are porting it to wqvga if anyone is interested.
Click to expand...
Click to collapse
is there any way to edit the same for a qvga version.i think no,but i hope yes .moreover is there any cab available for manila 2.1 or 2.5 for any version?
regards
If we can figure out how to port manila 3d 2.5 to QVGA, then we get this (when it's released).
http://forum.xda-developers.com/showthread.php?t=625652
simzz said:
If we can figure out how to port manila 3d 2.5 to QVGA, then we get this (when it's released).
http://forum.xda-developers.com/showthread.php?t=625652
Click to expand...
Click to collapse
for that nice and sweet dream only i started this thread mate...and working on it....
regards
Any News on it so far !
What if all 3D capabilities are removed , We already know Sense needs 3D hardware but i am sure it can be ported without 3D acceleration with static images.
Looking forward to some magic !
simzz said:
If we can figure out how to port manila 3d 2.5 to QVGA, then we get this (when it's released).
http://forum.xda-developers.com/showthread.php?t=625652
Click to expand...
Click to collapse
LOL, I don't think that this would ever becoming true! Even with a successful ported Sense 2.1/2.5, our Nike will be at it's limit to handle Sense!
deepankerjha said:
for that nice and sweet dream only i started this thread mate...and working on it....
regards
Click to expand...
Click to collapse
Only dreaming geniuses made huge inventions in history, don't they?
But I think you won't be successful in porting it without proper 3D hardware drivers since Sense 2.1/2.5 refers to some OpenGL functions provided by the MSM72xx hardware!
But anyway, good luck! Would be really great if I could fail with my down-to-earth thoughts!