Can someone please help me, or point me in the right direction on how to setup and run simple commands through adb on a MAC? Yes, I've used the search, and yes I've searched all over the internet but I still cannot figure it out. Sorry for my stupidity lol
But any help would be greatly appreciated, thank you
Perhaps you could say a few words about what you have tried already and where you are stopped.
I'm assuming you've downloaded and installed the Mac version of the SDK, yes?
On the phone, you need to turn on Settings -> Applications -> Development -> USB debugging (and may as well check "Stay awake", too).
I don't have a OS/X box, but on Linux you need to perform the *first* adb command as root... the first time an "adb" command is run (after a reboot) it starts up an adb-server process, and that needs to be priviliged enough to write to USB. (After that, you can run adb commands as any user, since those commands "talk" to the adb-server on your Mac, which in turn talks to the phone over the USB cable.)
bftb0
Go to developer. android. com/sdk/index.html (take out the spaces - I still can't post links for some reason) and download the Android SDK for Mac. That same page also includes directions on how to get started with installation. You'll be using the Terminal within Mac OS X for ADB commands, so I would recommend getting comfortable with Terminal before jumping into the SDK. Unfortunately, you'll have to look this up because I couldn't even begin to explain everything, nor do I have the time. Hope the rest helps, though.
bftb0 said:
Perhaps you could say a few words about what you have tried already and where you are stopped.
I'm assuming you've downloaded and installed the Mac version of the SDK, yes?
On the phone, you need to turn on Settings -> Applications -> Development -> USB debugging (and may as well check "Stay awake", too).
I don't have a OS/X box, but on Linux you need to perform the *first* adb command as root... the first time an "adb" command is run (after a reboot) it starts up an adb-server process, and that needs to be priviliged enough to write to USB. (After that, you can run adb commands as any user, since those commands "talk" to the adb-server on your Mac, which in turn talks to the phone over the USB cable.)
bftb0
Click to expand...
Click to collapse
Yes I've downloaded and installed the sdk, turned debugging on and now im trying to flash the recovery image onto my phone and that is where im lost at because I don't know exactly what to do
Los-O said:
Yes I've downloaded and installed the sdk, turned debugging on and now im trying to flash the recovery image onto my phone and that is where im lost at because I don't know exactly what to do
Click to expand...
Click to collapse
Note that what you are asking (now) is completely different than what you asked about in your OP - in fact, OS X is immaterial, really, in light of what you just indicated. That suggests that you are in a hurry... if that is the case, I recommend you spend a couple days reading before you rush off and do something you might regret. It is evident from your response that you really have not been reading the threads here with much diligence.
If you are trying to flash a recovery image, that implies that your phone is already rooted; either that what you are trying it isn't going to work - you have to have a rooted phone to begin with before you flash a custom recovery image. At the moment, you can root your Eris only if it has a 1.5 (1.16.605.1 or 1.17.605.1) official Verizon/HTC release on it. This has been described if not a hundred times in the threads here, at least tens of times - you need to read some more.
Nevertheless, if you want to rush into something, here is a step by step set of instructions which was current a couple of days ago. I won't vouch for it being 100% up to date with the latest and greatest images (either ROM or recovery), but it completely describes the process involved.
Stock 1.5 --> Root (2.1) install --> Custom Recovery install -> recovery to custom ROM 0.3. That's what is working at the moment.
bftb0
bftb0 said:
Note that what you are asking (now) is completely different than what you asked about in your OP - in fact, OS X is immaterial, really, in light of what you just indicated. That suggests that you are in a hurry... if that is the case, I recommend you spend a couple days reading before you rush off and do something you might regret. It is evident from your response that you really have not been reading the threads here with much diligence.
If you are trying to flash a recovery image, that implies that your phone is already rooted; either that what you are trying it isn't going to work - you have to have a rooted phone to begin with before you flash a custom recovery image. At the moment, you can root your Eris only if it has a 1.5 (1.16.605.1 or 1.17.605.1) official Verizon/HTC release on it. This has been described if not a hundred times in the threads here, at least tens of times - you need to read some more.
Stock 1.5 --> Root (2.1) install --> Custom Recovery install -> recovery to custom ROM 0.3. That's what is working at the moment.
bftb0
Click to expand...
Click to collapse
I've already rooted my phone
Los-O said:
I've already rooted my phone
Click to expand...
Click to collapse
Well, then you should be on your way; the instructions for what you are trying to attempt are in that link I provided for you in answer to your question (which you purposely redacted when you quoted my post).
I understand that it's your first post, and I should give some leeway for that reason alone, especially since you might have gotten root without ever having used "adb" or "fastboot". (PB00IMG.ZIP method).
On the other hand, I think you can see my point. Please try to avoid wasting other people's time by providing them useful & relevant details of your situation so they can give you good answers. And reading some of the links adjacent to your own post which actually give exactly the details you are asking for might be a good idea, too.
You wanted to know "What are the directions to DisneyWorld?", but instead asked "How do I put gas in my car?" - when you already knew exactly how to do that. But don't take my word for it - reread your first post for yourself - it actually says nothing about what you are trying to do.
I don't know, maybe I got this all wrong, and you still don't have your phone talking to your OS X machine correctly with adb, and that's the source of the trouble. But then, there would be no way to know one way or another - you haven't really said.
bftb0
Download the android sdk and run this automator script.
20 Questions
Los-O:
You said "any help would be greatly appreciated." Maybe that will also include help from the surly folks, such as me.
You said you have "downloaded and installed the SDK". Let's start there. (Also, note that the Android SDK for Mac OS X is only for x86 Apple machines - stop right here if you are using an older PPC based OS X machine).
The Mac SDK is in a .zip file. I presume that means that you unzipped it somewhere on your hard drive, and that you can remember what the folder name/directory name is where you unpacked all those files. (From where I sit, that could mean that you used a GUI based tool, or something from the command line to unpack the files; but I am guessing.)
Here is a flowchart to help you with the steps.
(1) Have you successfully run the "adb" command from within a Terminal window? (Yes: goto (4), No: Continue)
(2) Do you know how to open a Terminal window in OS X? (Yes: goto (4), No: Continue)
(3) Have a look at this information about Terminal on OS X, and then
(4) Start a Terminal window up.
(5) When you type the command (followed by hitting the Enter key):
Code:
adb --help
at the command line, do you get a pageful of information about the adb command, or an error such as "command not found"? (Help Info: goto step (7), No: Continue)
(6) Add to your PATH the location of the SDK tools (including "adb"). For this step, you need to recall where you unpacked your .zip file. On my Linux box, the "adb" command (and others) are located in the folder at
/opt/android/android-sdk_r05-linux_86/tools/
where the part "/opt/android/" is the folder I unzipped them in. For OS X, surely the next folder name in the path is something other than "android-sdk-linux_86" - just poke around in whatever OS X uses as a file browser, and look for the "tools" folder underneath where you unpacked the files. Once you have done that, you should be able to type the full "path" to that (tools) folder in a command.
Let's suppose that the complete path to that "tools" folder looks something like this:
/HardDrive1/foo/bar/android-sdk_r05-mac_86/tools
Then, for example, we would add this to the current terminal (shell) PATH using the following command:
Code:
export PATH=${PATH}:/HardDrive1/foo/bar/android-sdk_r05-mac_86/tools
Obviously, you would change the part "HardDrive...86" so it matches the complete path to the "tools" folder in the SDK which you unpacked onto your machine.
You can inspect the value of PATH for correctness by typing the command
Code:
echo $PATH
Now, go back to step (5) and keep at steps 5-6 until you are able to run the "adb --help" command successfully - that is, get it to print some help information. Don't close this Terminal window after you have the PATH set correctly - we are going to use it shortly.***
(7) Plug the phone into the USB cable and the USB cable into the computer
(8) On the phone, make sure that Settings -> Applications -> Development -> USB debugging is toggled on.
(9) In the terminal window from step (6), type the commands
Code:
adb kill-server
adb devices
You will see one of three things at this point after the "adb devices" command executes:
A. (this is what we want to see)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
HT9ABCDnnnnn device
If you see this, very good: adb has detected your phone and talked to it; continue to step # (10).
B. (not good - you probably need to run adb as the root user)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
???????????? no permissions
In this case, the "adb" command ran, and detected the presence of the phone, but does not have sufficient privileges to write to the USB device; whether or not this happens in a given flavor or Unix (e.g. OS X) depends on what user and group permissions are set on the device, and which "groups" regular users are in. Not having OS X in front of me, I can not predict; but the solution in this case is to run the command as the root user.
It is my impression that OS X has the "sudo" command for this purpose (read here); if that is the case, then you might want to run the commands
Code:
adb kill-server
sudo `which adb` devices
If sudo is not available to you, or not setup correctly, you might have to read this Apple Technical Note, or this one, or this one
C. (some other problem - no USB device is detected)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
Your on your own for this one - consult your local Apple OS X expert!
(10) Now you are ready to communicate with the phone using "adb" commands.
Note that running the "adb" command for the first time after your OS X machine is booted up creates a long lived adb "server" process. (You might see it in a "ps" command listing as "adb fork-server"). That process is what actually communicates with the phone. Any subsequent "adb" command first communicates with that "adb server" on your OS X machine, and then the server communicates with the phone.
Sometimes it goes stale or gets cranky after unplugging the phone too many times. Simply re-start if you want by doing a "adb kill-server" (any user can do this), followed by any adb command, keeping in mind the results from step # (9) above.
OK, whew! The desired goal was to get a recovery image loaded on to the Eris after it had been rooted - it is time to do that, as adb is working now.
See the Instructions by GrdLock here, in the section entitled "II. Installing Amon's recovery image"
bftb0
***The setting of the PATH when you use the Terminal app using the directions given in step # (6) only last for the life of a single Terminal session. If you want to make this change in such a way that it will be already set up every time you open a new Terminal window, you need to do this by editing a file in your home folder - either ".bash_profile" or ".bashrc" . (Different files names are used depending on which "shell" is used). Setting this up is an exercise left up to the interested reader.
Once you have the android sdk unzipped, add the full path to the android tools directory to your path.
I just added the path to my .bash_profile.
For me it looks like this:
export ANDROID-SDK=/Users/Aaron/android-sdk/
export PATH=$ANDROID-SDK/toolsATH
Then I save and close my bash_profile and run the command, from the terminal:
source .bash_profile
This reloads the bash_profile into the shell. Then cd to your android tools directory. Once you get into the tools directory type the command adb. If everything is correct you should see a help menu spit out to the console.
If you need help with your bash_profile a simple google search will help you out.
hey bftb0,
just wanted to chime in and say thanks for that step-by-step. been wrestling with the same issues as the original poster and your walk through got it going. thanks for being patient.
taocow
bftb0,
thank you so so soo much for that last post, I think i've finally figured it out. and also thank you for your patience, i wish i could buy you a coke or something lol
taocow said:
hey bftb0,
just wanted to chime in and say thanks for that step-by-step. been wrestling with the same issues as the original poster and your walk through got it going. thanks for being patient.
taocow
Click to expand...
Click to collapse
los-O said:
bftb0,
thank you so so soo much for that last post, I think i've finally figured it out. and also thank you for your patience, i wish i could buy you a coke or something lol
Click to expand...
Click to collapse
taocow / los-O
Did you need to run the first "adb" command as root with "sudo" ? Let me know - and also mention the version of OS X that you are using; maybe it will help other Mac users if they read this thread. (I got the impression from reading a little bit that different releases of OS X might handle "sudo" a little differently - or have different device permissions for regular users.)
Also, in reviewing this thread, I have to say ... I acted like an a$$. And I should know better, I did IT for a while. If there is one thing I learned about dealing with people and computers, it's that it is extremely easy for a misunderstanding to occur, and especially if you are helping someone out over the phone or via mail/forum. Please accept my apologies.
bftb0
bftb0 said:
taocow / los-O
Did you need to run the first "adb" command as root with "sudo" ? Let me know - and also mention the version of OS X that you are using; maybe it will help other Mac users if they read this thread. (I got the impression from reading a little bit that different releases of OS X might handle "sudo" a little differently - or have different device permissions for regular users.)
Also, in reviewing this thread, I have to say ... I acted like an a$$. And I should know better, I did IT for a while. If there is one thing I learned about dealing with people and computers, it's that it is extremely easy for a misunderstanding to occur, and especially if you are helping someone out over the phone or via mail/forum. Please accept my apologies.
bftb0
Click to expand...
Click to collapse
also now im able to install the recovery (thanks to you) but when i try and push the recovery and flash images i get
"cannot stat 'recovery.img': No such file or directory" same for the flash image
but i put the files in the tools folder like the guide said to do...?
also im on OS X 10.6.2, but no i didnt have to use the "sudo" thing you were talking about, the "adb devices" command worked the first try. and dont worry about it, i understand where you were coming from. but apology accepted, though
Los-O said:
also now im able to install the recovery (thanks to you) but when i try and push the recovery and flash images i get "cannot stat 'recovery.img': No such file or directory" same for the flash image but i put the files in the tools folder like the guide said to do...?
Click to expand...
Click to collapse
That sounds like you are referring to the files by name, but they are not in the current directory where you are running the fastboot command.
The "pwd" command (Print Working Directory) tells you what your current directory is.
The "cd folder-path" command (Change Directory) allows you to change the Terminal/Shell's idea of where the "current directory" is.
The idea behind the PATH variable is that it is a searchable list (separated by ':' colon characters), so that you can be in a given directory with the files you want to manipulate, but the commands you use are in other directories. When you start a command by typing its' name, the Terminal/Shell app walks through that list of folders in PATH (from left to right in order), looking for that program by name.
That means that if you want to run a program ("proggie") that opens a file ("myfile") that is in the current directory you might type the command.
$ proggie myfile
(or $ proggie ./myfile )
... and as long as "proggie" was in one of the folders listed in your PATH, it would run, and find your file "myfile".
But, there is no requirement that you be in the same directory with your files, or the program that you are running (for instance "fastboot"). In those cases, you need to explicitly specify the complete path to your files or programs, so they can be found. For instance:
$ proggie /users/los-o/mystuff/project3/myfile
or, if "proggie" was not in a folder in your PATH, but you knew that it was located in /opt/tools, you could type the command
$ /opt/tools/proggie myfile
If your current directory contains the file "myfile", or
$ /opt/tools/proggie /users/los-o/mystuff/project/myfile.
Same deal with fastboot - you give it the name of the recovery file as the 3rd argument on the "command line"
$ fastboot flash recovery name-of-my-copy-of-the-recovery-file.img
bftb0
*Whew!* Ok thanks again bftb0 for all the help, I think im finally starting to get the hang of this adb stuff
u have a knack for teaching
bftb0 said:
Los-O:
You said "any help would be greatly appreciated." Maybe that will also include help from the surly folks, such as me.
You said you have "downloaded and installed the SDK". Let's start there. (Also, note that the Android SDK for Mac OS X is only for x86 Apple machines - stop right here if you are using an older PPC based OS X machine).
The Mac SDK is in a .zip file. I presume that means that you unzipped it somewhere on your hard drive, and that you can remember what the folder name/directory name is where you unpacked all those files. (From where I sit, that could mean that you used a GUI based tool, or something from the command line to unpack the files; but I am guessing.)
Here is a flowchart to help you with the steps.
(1) Have you successfully run the "adb" command from within a Terminal window? (Yes: goto (4), No: Continue)
(2) Do you know how to open a Terminal window in OS X? (Yes: goto (4), No: Continue)
(3) Have a look at this information about Terminal on OS X, and then
(4) Start a Terminal window up.
(5) When you type the command (followed by hitting the Enter key):
Code:
adb --help
at the command line, do you get a pageful of information about the adb command, or an error such as "command not found"? (Help Info: goto step (7), No: Continue)
(6) Add to your PATH the location of the SDK tools (including "adb"). For this step, you need to recall where you unpacked your .zip file. On my Linux box, the "adb" command (and others) are located in the folder at
/opt/android/android-sdk_r05-linux_86/tools/
where the part "/opt/android/" is the folder I unzipped them in. For OS X, surely the next folder name in the path is something other than "android-sdk-linux_86" - just poke around in whatever OS X uses as a file browser, and look for the "tools" folder underneath where you unpacked the files. Once you have done that, you should be able to type the full "path" to that (tools) folder in a command.
Let's suppose that the complete path to that "tools" folder looks something like this:
/HardDrive1/foo/bar/android-sdk_r05-mac_86/tools
Then, for example, we would add this to the current terminal (shell) PATH using the following command:
Code:
export PATH=${PATH}:/HardDrive1/foo/bar/android-sdk_r05-mac_86/tools
Obviously, you would change the part "HardDrive...86" so it matches the complete path to the "tools" folder in the SDK which you unpacked onto your machine.
You can inspect the value of PATH for correctness by typing the command
Code:
echo $PATH
Now, go back to step (5) and keep at steps 5-6 until you are able to run the "adb --help" command successfully - that is, get it to print some help information. Don't close this Terminal window after you have the PATH set correctly - we are going to use it shortly.***
(7) Plug the phone into the USB cable and the USB cable into the computer
(8) On the phone, make sure that Settings -> Applications -> Development -> USB debugging is toggled on.
(9) In the terminal window from step (6), type the commands
Code:
adb kill-server
adb devices
You will see one of three things at this point after the "adb devices" command executes:
A. (this is what we want to see)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
HT9ABCDnnnnn device
If you see this, very good: adb has detected your phone and talked to it; continue to step # (10).
B. (not good - you probably need to run adb as the root user)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
???????????? no permissions
In this case, the "adb" command ran, and detected the presence of the phone, but does not have sufficient privileges to write to the USB device; whether or not this happens in a given flavor or Unix (e.g. OS X) depends on what user and group permissions are set on the device, and which "groups" regular users are in. Not having OS X in front of me, I can not predict; but the solution in this case is to run the command as the root user.
It is my impression that OS X has the "sudo" command for this purpose (read here); if that is the case, then you might want to run the commands
Code:
adb kill-server
sudo `which adb` devices
If sudo is not available to you, or not setup correctly, you might have to read this Apple Technical Note, or this one, or this one
C. (some other problem - no USB device is detected)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
Your on your own for this one - consult your local Apple OS X expert!
(10) Now you are ready to communicate with the phone using "adb" commands.
Note that running the "adb" command for the first time after your OS X machine is booted up creates a long lived adb "server" process. (You might see it in a "ps" command listing as "adb fork-server"). That process is what actually communicates with the phone. Any subsequent "adb" command first communicates with that "adb server" on your OS X machine, and then the server communicates with the phone.
Sometimes it goes stale or gets cranky after unplugging the phone too many times. Simply re-start if you want by doing a "adb kill-server" (any user can do this), followed by any adb command, keeping in mind the results from step # (9) above.
OK, whew! The desired goal was to get a recovery image loaded on to the Eris after it had been rooted - it is time to do that, as adb is working now.
See the Instructions by GrdLock here, in the section entitled "II. Installing Amon's recovery image"
bftb0
***The setting of the PATH when you use the Terminal app using the directions given in step # (6) only last for the life of a single Terminal session. If you want to make this change in such a way that it will be already set up every time you open a new Terminal window, you need to do this by editing a file in your home folder - either ".bash_profile" or ".bashrc" . (Different files names are used depending on which "shell" is used). Setting this up is an exercise left up to the interested reader.
Click to expand...
Click to collapse
excellent post...very helpful
Los-O said:
Can someone please help me, or point me in the right direction on how to setup and run simple commands through adb on a MAC? Yes, I've used the search, and yes I've searched all over the internet but I still cannot figure it out. Sorry for my stupidity lol
But any help would be greatly appreciated, thank you
Click to expand...
Click to collapse
I do everything on a Mac, so I would be the guy to ask. How far did you get? Have you unzipped the sdk to a folder?
Basically the difference between mac and others is that when others do a command like adb, we have to do ./adb This is true for other commands too. It's easy once you get used to it.
bftb0,
Thanks so much! Step 6 solved my problem
Thank you!!
bftb0 said:
Los-O:
You said "any help would be greatly appreciated." Maybe that will also include help from the surly folks, such as me.
You said you have "downloaded and installed the SDK". Let's start there. (Also, note that the Android SDK for Mac OS X is only for x86 Apple machines - stop right here if you are using an older PPC based OS X machine).
The Mac SDK is in a .zip file. I presume that means that you unzipped it somewhere on your hard drive, and that you can remember what the folder name/directory name is where you unpacked all those files. (From where I sit, that could mean that you used a GUI based tool, or something from the command line to unpack the files; but I am guessing.)
Here is a flowchart to help you with the steps.
(1) Have you successfully run the "adb" command from within a Terminal window? (Yes: goto (4), No: Continue)
(2) Do you know how to open a Terminal window in OS X? (Yes: goto (4), No: Continue)
(3) Have a look at this information about Terminal on OS X, and then
(4) Start a Terminal window up.
(5) When you type the command (followed by hitting the Enter key):
Code:
adb --help
at the command line, do you get a pageful of information about the adb command, or an error such as "command not found"? (Help Info: goto step (7), No: Continue)
(6) Add to your PATH the location of the SDK tools (including "adb"). For this step, you need to recall where you unpacked your .zip file. On my Linux box, the "adb" command (and others) are located in the folder at
/opt/android/android-sdk_r05-linux_86/tools/
where the part "/opt/android/" is the folder I unzipped them in. For OS X, surely the next folder name in the path is something other than "android-sdk-linux_86" - just poke around in whatever OS X uses as a file browser, and look for the "tools" folder underneath where you unpacked the files. Once you have done that, you should be able to type the full "path" to that (tools) folder in a command.
Let's suppose that the complete path to that "tools" folder looks something like this:
/HardDrive1/foo/bar/android-sdk_r05-mac_86/tools
Then, for example, we would add this to the current terminal (shell) PATH using the following command:
Code:
export PATH=${PATH}:/HardDrive1/foo/bar/android-sdk_r05-mac_86/tools
Obviously, you would change the part "HardDrive...86" so it matches the complete path to the "tools" folder in the SDK which you unpacked onto your machine.
You can inspect the value of PATH for correctness by typing the command
Code:
echo $PATH
Now, go back to step (5) and keep at steps 5-6 until you are able to run the "adb --help" command successfully - that is, get it to print some help information. Don't close this Terminal window after you have the PATH set correctly - we are going to use it shortly.***
(7) Plug the phone into the USB cable and the USB cable into the computer
(8) On the phone, make sure that Settings -> Applications -> Development -> USB debugging is toggled on.
(9) In the terminal window from step (6), type the commands
Code:
adb kill-server
adb devices
You will see one of three things at this point after the "adb devices" command executes:
A. (this is what we want to see)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
HT9ABCDnnnnn device
If you see this, very good: adb has detected your phone and talked to it; continue to step # (10).
B. (not good - you probably need to run adb as the root user)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
???????????? no permissions
In this case, the "adb" command ran, and detected the presence of the phone, but does not have sufficient privileges to write to the USB device; whether or not this happens in a given flavor or Unix (e.g. OS X) depends on what user and group permissions are set on the device, and which "groups" regular users are in. Not having OS X in front of me, I can not predict; but the solution in this case is to run the command as the root user.
It is my impression that OS X has the "sudo" command for this purpose (read here); if that is the case, then you might want to run the commands
Code:
adb kill-server
sudo `which adb` devices
If sudo is not available to you, or not setup correctly, you might have to read this Apple Technical Note, or this one, or this one
C. (some other problem - no USB device is detected)
Code:
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
Your on your own for this one - consult your local Apple OS X expert!
(10) Now you are ready to communicate with the phone using "adb" commands.
Note that running the "adb" command for the first time after your OS X machine is booted up creates a long lived adb "server" process. (You might see it in a "ps" command listing as "adb fork-server"). That process is what actually communicates with the phone. Any subsequent "adb" command first communicates with that "adb server" on your OS X machine, and then the server communicates with the phone.
Sometimes it goes stale or gets cranky after unplugging the phone too many times. Simply re-start if you want by doing a "adb kill-server" (any user can do this), followed by any adb command, keeping in mind the results from step # (9) above.
OK, whew! The desired goal was to get a recovery image loaded on to the Eris after it had been rooted - it is time to do that, as adb is working now.
See the Instructions by GrdLock here, in the section entitled "II. Installing Amon's recovery image"
bftb0
***The setting of the PATH when you use the Terminal app using the directions given in step # (6) only last for the life of a single Terminal session. If you want to make this change in such a way that it will be already set up every time you open a new Terminal window, you need to do this by editing a file in your home folder - either ".bash_profile" or ".bashrc" . (Different files names are used depending on which "shell" is used). Setting this up is an exercise left up to the interested reader.
Click to expand...
Click to collapse
Wow what a straightforward guide to helping me get this set up!! A million thanks! I don't even have an Eris, but what model of the phone you have is irrevelant to this guide...
Thanks again!!
I did a few things the other day in SDK, messing around with emulators. Now I can't get adb to work.
I keep getting this:
c:\AndroidSDK>adb
'adb' is not recognized as an internal or external command,
operable program or batch file.
This is the exact path I had used in the past, even following the .txt instructions that have worked for me in the past.
Yes in am in debugging, charge only, partition mount showing "unmount /system" like it has in the past. Does this have anything to do with what packages I updated when I was messing with SDK emulator?
duckredbeard said:
I did a few things the other day in SDK, messing around with emulators. Now I can't get adb to work.
I keep getting this:
c:\AndroidSDK>adb
'adb' is not recognized as an internal or external command,
operable program or batch file.
This is the exact path I had used in the past, even following the .txt instructions that have worked for me in the past.
Yes in am in debugging, charge only, partition mount showing "unmount /system" like it has in the past. Does this have anything to do with what packages I updated when I was messing with SDK emulator?
Click to expand...
Click to collapse
Go into the directory and see if there is a file called adb in there...if it's not check the other folders like tools or something like that i'm at work so i don't know the exact name of the directories...
duckredbeard said:
I did a few things the other day in SDK, messing around with emulators. Now I can't get adb to work.
I keep getting this:
c:\AndroidSDK>adb
'adb' is not recognized as an internal or external command,
operable program or batch file.
Click to expand...
Click to collapse
This is a PC error message stating that the file adb.exe is no longer in the AndroidSDK directory. As zervic mentioned, check and see if the file adb.exe is in that directory.
We're onto something...there is no adb in the AndroidSDK folder. So where do I get this adb? I did the SDK so long ago, like 5 months. Don't remember a thing about it and consider myself lucky that I got it going back then, piecing together youtube videos and several forums.
duckredbeard said:
We're onto something...there is no adb in the AndroidSDK folder. So where do I get this adb? I did the SDK so long ago, like 5 months. Don't remember a thing about it and consider myself lucky that I got it going back then, piecing together youtube videos and several forums.
Click to expand...
Click to collapse
Just reinstall (or unzip if I remember right) the Android SDK into that directory
I started the "update all" in the "installed packages" window. If that doesn't fix it, I shall follow your advice.
Edit: The "update all" didn't fix it.
I found the .zip and extracted it to my c:\AndroidSDK folder, but still a nogo. I also tried copying adb.exe straight to the AndroidSDK folder, still a nogo.
Anything else to try?
When I copied adb.exe to the tools folder and tried adb in cmd prompt, I got "This application has failed to start because AdbWinApi.dll was not found. Re-installing the application may fix this problem"
Are they telling me to uninstall SDK and start over? Like I said, I was lucky to get it going the first time!
Smack myself in the head while I Edit: Found the AdbWinApi.dll in the zip and copied it to the tools folder. Adb runs now and recognizes my device. Later I will find out if I can rm some stock apps from my wife's new phone.
Thanks for your help in this matter.
duckredbeard said:
I found the .zip and extracted it to my c:\AndroidSDK folder, but still a nogo. I also tried copying adb.exe straight to the AndroidSDK folder, still a nogo.
Anything else to try?
When I copied adb.exe to the tools folder and tried adb in cmd prompt, I got "This application has failed to start because AdbWinApi.dll was not found. Re-installing the application may fix this problem"
Are they telling me to uninstall SDK and start over? Like I said, I was lucky to get it going the first time!
Smack myself in the head while I Edit: Found the AdbWinApi.dll in the zip and copied it to the tools folder. Adb runs now and recognizes my device. Later I will find out if I can rm some stock apps from my wife's new phone.
Thanks for your help in this matter.
Click to expand...
Click to collapse
Just so you know that may be a little unstable. It may be worth your while to check the "platform-tools" folder and see if adb is in there, i believe that's where it is by default and it also may be worth your while to run adb from that folder instead of where you jerry rigged it to run. But, on the other hand, it may work the way you have it. You never know. Just figured I'd throw that out there.
While rooting my Nook Color, I came across a recommendation for a free app in the market called adbWireless.
It's AWESOME! No need to use USB or worry about drivers, just install the app, push the big huge button and then type the adb command it shows you to connect to your device. Worked absolutely perfectly on my Nook... haven't tried it on my Aria, but next time I need to ADB something on it, you can bet I will!
did anyone check their tools directory?
ie: C:\android-sdk-windows\tools
LOL
I've finally decided to try to root my G2 but can't get past the ADB setup. I downloaded the SDK, but when I open the manager and try to install platform tools it goes through the motions and then tells me nothing was installed. When I open a command prompt and type "ADB devices" it doesn't recognize anything. What am I doing wrong??
EDIT: specifically, when I try to install platform-tools it tells me it couldn't create a directory and nothing was installed.
66 people have read this and nobody has any suggestions to help?
i think you miss the 1st procedure....
you must have the unknown resources and the usb debbuging enabled.....
then you can proceed to your super one click rooting.....
I have a problem after rebooting my PC: <Java not found...> Reinstalling doesn't help, adding environment variables too. Any idea?
Just root using the rage/visionary method. No adb needed and very easy to do. Here is the linkhttp://forum.xda-developers.com/showthread.php?t=834228
Sent from my SilverBullet 'HTCDesireZ running CM7'
juvanni said:
i think you miss the 1st procedure....
you must have the unknown resources and the usb debbuging enabled.....
then you can proceed to your super one click rooting.....
Click to expand...
Click to collapse
I don't understand? I'm trying to root following the recommended wiki instructions, and I haven't been able to get adb to work so I haven't gotten past that step.
Are you running windows x64? Cause the android installer has issues detecting java on x64 systems.
When it says 'Can't find java' or whatever the error is, click back, then next again, it should find it the second time around. Well thats what happened for me anyway.
-Nipqer
If you're on froyo just use the app z4 root or universal androot
You can also use superoneclick root 2.11
Its very easy and it only take about 3 minutes
Stewie just said that!
I appreciate the help so far, but my problem is I have gingerbread and everything I've read requires froyo for root, and the only way I've read to downgrade uses ADB, so any non-ADB rooting method still won't work for me. I've followed the "ADB for dummies" thread and the other instruction thread and everything seems fine, but when I type in the first command for the downgrading it says adb isn't a recognized command. Am I in the wrong command prompt? I feel like its probably something really dumb I'm doing or not doing but for the life of me I can't figure it out.
Navigate to the folder adb is in.
Hold shift, right click in the folder (make sure nothing is selected)
select 'Open command window here' (or something along those lines)
Adb should work.
-Nipqer
OK, so I'm definitely in the right folder, I read and followed ADB for Dummies thread. Trying to follow this direction:
"Run the following command to verify the exploit has access to what it needs. (Only the first line is the command. The second line should be the result returned if all goes well.)
Code:
$ adb shell cat /dev/msm_rotator
/dev/msm_rotator: invalid length"
When I type that in, should there be spaces between the "adb" and "shell"? Should there be a space after the command prompt and before "adb"? I've tried several variations of it and it keeps telling me "adb is not recognized as an internal or external operable program or batch file."
ok you need to run the command from the folder with adb.exe in it, type it as adb<space>shell<space>cat<space>/dev/msm_rotator
If you are getting an error search for adb.exe and once found try the command again from this folder,if as you say you are in the right folder then I think you will have to reinstall adb as I just ran the command in the form above and it works so if you still get an error then something has gone wrong with the install
P.S Another way to make sure that adb is working and recognises your phone is to type adb devices, if your phone is attached and recognised then it will return a number
Thank you! I had to uninstall and reinstall the package, I don't know what was wrong but it seems to be working now. Also, I knew I was probably doing something stupid, and I was. I wasn't in the platform-tools directory for my command prompt, I was in the TOOLs directory. Just so I'm clear, every command I type into the terminal should be in the Platform-tools directory, correct?
Now, assuming I can follow all the other directions with no problems, once I get to the downgrade pushing steps, I will lose all my current settings, right? It will be a fresh froyo 2.2 like it came to me originally? Other than using Appbrain to back up my current apps, how else should I make a backup?
Final question, do I need to follow the temp root directions and push the downgrade all at one time? Or can I do the temp root and come back at a later time to push the downgrade?
First problem solved then!
Yes but follow this Step 4
Now we need to update your Path variable. This lets you run adb on your PC from a command window no matter which directory you are in (which makes things a lot easier). If you don't setup your Path, then every time you want to run adb, you will either have to type the whole long pathname where you put adb, or cd to where you've put adb and run it from there (which could be inconvenient if you are transferring files to/from your phone).
On your PC, right-click on "My Computer" and select "Properties". (on Vista, click on "Change Settings"). Go to the "Advanced" tab, then select "Environment Variables". Find the "Path" variable in the list of variables that it shows (you might need to scroll), and then double-click on that entry to edit it. Add the full path of the "tools" and "platform-tools" folders of the SDK to your path. e.g. if the SDK has been installed in "c:\Program Files\android-sdk-windows", then add to your Path "c:\Program Files\android-sdk-windows\tools;c:\Program Files\android-sdk-windows\platform-tools" (Please Note - don't put any spaces between the semi-colon and pathname, otherwise it won't work !)if you want to.
Once done you can use ADB from the command prompt in ANY folder,very handy IMO.
If I was you I would set aside enough time and see it through,no point to temp rooting alone.
Get Titanium backup from the market an absolute essential app with this you can backup,upload to dropbox(Another essential app) uninstall apps and a host of other useful tools.
Read the guide first as well,good luck.