I use the Slide feature of my Niki to answer (and end via Slide actions app) calls.
I'd like to have this as the only way to answer a call, since when a call is incoming the device unlocks and the screen switches on. This means that it can get answered in my pocket if I don't hear it (or ignore it). I can also accidentally reject the call getting it out of my pocket.
Unfortunately, I can't seem to find a way of keeping the screen off/locked when a call is incoming. Does anyone know of a way to do this?
Download and try AE Button Plus. An idea: You could make a single press of the answer key "do nothing", and double pressing (which has to be done very quickly, thus unlikely whilst in your pocket) act like normal.
Hi all,
When I receive a call I have 2 options on the touchscreen: "answer" and "reject" a call... a friend of mine who has also the HTC dual touch has on his screen besides the "answer" also a "silent" button which allows the incoming call to continue but disables the ringtone.
Anyone any idea if this is a registry setting or something? If my friend pushes the red (HW) button then he also rejects the call.
Cheers
Berre
if you press the volume up or down button on the side of the phone that will put into silent whilst ringing
Hi,
I don't find those buttons easy to press so I would really like that "shortcut" on the touchscreen...
Some versions seem to have it and mine doesn't so this should be SW related or registry setting... anyone?
Cheers
Berre
found it
HKLM/Software/HTC/PHONE/PhoneExtendedSettings/RejectEnable
Change it from 0 to 1 and it works
Cheers
B
hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers
This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot
I use Pocket Shield - it's not free (free to try though) but it's worked well for me
tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.
thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.
Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone
CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.
has anyone tried Lockmelite?
It may help - haven't used it myself though.
x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.
Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR
Pocket Shield doing perfect job for me
I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.
When there is an incoming call, i press the mute ring button under the slide answer but it doesnt work. The graphic shows that the key is pressed but the ring still keeps ringing.
I just realised that when this happened, my (hard) call key also not functioning. although i can still use the phone on screen button to get to the call log. Anybody have solution for this.
Note: after i soft reset, the function is back to normal but will be the same after few days.
seem like i have decided to buy the wrong os mobile since thereisnt seem to be much help here
I've been using a Nexus 6P for five months and continue to have problems answering calls. Very often, when my phone rings I extract the phone from my pocket and find that the call has already been rejected (as if I had done a swipe left). At other times, swiping right causes the phone to reject the call.
Are there any alternatives to the swiping method as a way of answering calls? For example, can I disable the swiping method and answer by pressing the power button briefly?
Any help would be appreciated.