Related
Here are some registry tweaks for your Mini
Please make a backup of your REGISTRY and all the other stuff of your PDA before you apply the following tweaks
Install directory to your storage/storage card.
To install your application/program to storage memory or storage card memory. Whenever you are about to install, there will one screen appear to ask you where to install the program. But not to forget to change it back the default value to 0 after the installation or u might encounter weird situation when you want to change your today screen and etc..
Code:
HKEY_LOCAL_MACHINE\Software\Apps\Microsoft Application Installer
Default: 0
Changed: 1
Fast graphic but consume memory
It can fasten and smoothen your OS graphic movement, but it will eat some of your program memory, not that much. You also can change it to 32768 instead of 16384 for greater result.
Code:
HKEY_LOCAL_MACHINE\System\GDI\GLYPHCACHE
Default: 8192
Changed: 16384
To hide screen rotate icon
There is a small PDA icon at your bottom right corner of your screen to change ur screen orientation from patriot to landscape and other way round. For me, its unnecessary, so you can hide it.
Code:
HKEY_LOCAL_MACHINE\Service\ScreenRotate
ShowIcon value change to 0
Default: 1
Changed: 0
To turn off flashing LEDs and Vibration
It will turn off the blinking green/red/orange LED and the vibration mode. Some people will irritate by the blinking, especially when you're driving and sleep at night.
Code:
HKEY_LOCAL_MACHINE\Drivers\Builtin\AllLEDMgr
Default: 1
Changed: 0
Enable camera frame rate display
Camera frame rate will appear on the screen when u're using the camera
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CAMERA\AppDefSettings\General
Default: 0
Changed: 1
To set ur ringstones to run from Storage Card
Place all your downloaded ringtones from internal memory to storage card. Usefull for our small/ciput Mini memory.
Code:
HKEY_CURRENT_USER\ControlPanel\SoundCategories\Ring\Directory registry key
Default value: "\Windows\Rings\"
Change it to: "\Storage Card\<your preferred directory>\" (Note that "\" at the end is extremely important!!!)
Place those ringtones into \Storage Card\<your preferred directory>\
Enable hidden editor function in Album
This opens the additional hidden function in the ALBUM, allows u to edit ur photo, brightness, contrast, crop, etc. Album (opens Editor menu):
Code:
HKEY_LOCAL_MACHINE/SOFTWARE/HTC/Album/Disable Editor
Disable value changed to: 0
SPB Pocket Plus Storage Card Display
If u notice, there is no indicator available to display our storage memory capacity. This will add Storage Card display icon. PLEASE FOLLOW THE STEP CAREFULLY!!
1. Add icon/item Backup Battery Indicator
2. Regedit the key in
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Spb Software House\Pocket Plus\Today Items\Pannels\
3. Find key in directory 00000 or 00001 or 00002 or 00004; that have Name Action with value *backupbattery
4. Change the value to *storagecard
5. Soft reset
O2mini Camera Settings Configuration
Enhance you picture taken quality. It will remove your camera snow effect
Code:
HKEY_LOCAL_MACHINE/SOFTWARE/HTC/Camera/AppDefSettings/General
Set
Contrast: 5
Brightness: 6
Saturation: 3 or 4 (recommended by Doc)
Hue: 5
Sharpness: 3
Unlimited 3gp Recording for mms settings
This will allow you to take unlimited recording time
Code:
HKEY_LOCAL_MACHINE \ SOFTWARE\HTC\camera\AppDefSettings\P3
DWord Value called "EnableLimit", change it from 1 to 0.
To include both time and date in taskbar
You'll get time and short date on your right top of the screen, rather just displaying time. Meaning, you can remove your date item on your today screen.
Code:
Phase 1:
1) Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\
2) Create a binary value named "TBOpt" and set its value to "13 00 00 00".
3) Soft-reset
Note: If u ever get bored of the date display, rid it by deleting the TBOpt key.
Phase 2: IF U NEED THE CHANGE THE DATE FORMAT:
i) Just go to Settings>Regional Settings>Date>Short Date
ii) Choose "dd-MMMM-yy" or whichever format u prefer.
iii) Click "ok".
Disabling “Message Sent” notification bubble
For those who hates the "Message Sent" notification after sending an SMS, this is the steps to remove the bubble notification...this is the STEP by STEP method to do it in case some of you guys dont get it right...
1. First, you will need to download a Registry Editor to help you do it...
2. using the Registry Editor, navigate to:
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Inbox
3. Next, click on Inbox (make sure the Inbox is highlighted) and select Edit, New Key
4. Name the New Key as "Settings"
5. Click on "Settings" (make sure the Settings is highlighted) and select Edit, New String Value
6. On "Value name:", key in SMSNoSentMsg and in "Value data", key in 1
7. Soft reset your device and test it with one SMS, and you will notice that the SMS Sent bubble is being disabled.
Audio Tweak
Audio Tweak enhances the speaker performance of the O2 Mini (some devices have this set to a lesser priority and by using this you get better sound, if your device is already set to a high level you have no need for this)
Code:
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev\Priority256
Default: 110
Changed to: 80
Disable start menu animation
This tweaking will eliminate the list of menu "drop-down animation" if u tab on Start/Flag icon.
Code:
HKEY_LOCAL_MACHINE\SYSTEM\GWE\Menu\
AniType value change from 6 to 0.
Looping Ringtones Delay
Ring tone has a standard 3 seconds delay before repeating. You can set the delay from 0 second to how many second that you want.
Code:
HKEY_CURRENT_USER\ControlPanel\Sounds\RingTone0
Change 'Script' from 'av0pw3r' to 'av0pr' and you'll get 0 sec delay.
OR change it to
av0pw1r = wait for 1 sec
av0pw2r = wait for 2 sec
and so on...
Plus..heres the code
a - stands for display
r - repeat/replay the script again
c - sets the volume C50, c150, c100
f - means flash .. f1 flash for 1 second and f0 stands for flash continuously
p -means play ringtone
v- vibrate then incorporate with number to state how many seconds it will vibrate example. v3 vibrate for 3seconds or v0 for continous
w - stands for wait or pause then specify how many seconds like w3(wait for 3 seconds)
heres the example
Flash - af1w60f0
Ring - apw3r
Ring Once - ap
Increasing Ring - c50apw3c150r
Vibrate Then Ring - v3w3apw3r
Vibrate - av3w3r
Short Vibrate - av1w3r
Vibrate Long Then Ring - v3w3v3w3apw3r
Vibrate And Ring - av0pw3r
Increasing Ring And Vibrate - c50apv3w3c150r
Fast Vibrate And Flash - af1v1w1f0r
Vibrate and Ring Continously without pausing - av0pr
SMS Notification On
This is different with message notification send, this will confirm you when message already recieve by receiver
Code:
[HKEY_CURRENT_USER\Software\Microsoft\Inbox\Settings]
SMSDeliveryNotify = dword:00000001 ->0 if off
How to:
Create new Dword value name SMSDeliveryNotify
with decimal value data 1
Wacth for capital letter
Changing the Message Sent Notification Message
Change the default "MessageSent". Example "Pesan sudah di kirim"
Code:
[c\SOFTWARE\Microsoft\Inbox\Svc\SMS]
Change the Value "MessageSent" to whatever you like.
Change the default input method
To change your input method, keyboard, letter recognizer, block recognizer as ur default, even you soft reset ur mini.
NOTE:
*for English ROM
*cannot set transcriber and Phatware Calligrapher with this trick.
Code:
HKEY_CURRENT_USER\ControlPanel\Sip
Change the "DefaultIm" value for:
To set keyboard as default SIP, change the "DefaultIm to
{42429667-ae04-11d0-a4f8-00aa00a749b9}
To set Character Recognizer as default SIP, change the "DefaultIm to
{42429690-ae04-11d0-a4f8-00aa00a749b9}
To set Block Recognizer as default SIP, change the "DefaultIm to
{42429691-ae04-11d0-a4f8-00aa00a749b9}
*change only the bold number will do. The rest are totally the same.
To set WordLogic as default SIP, change the "DefaultIm to
{4345EA53-B8A5-4E24-A14A-F7C34DD78077}
*No WordLogic in Xda O2 mini.
To Get The AM/PM on The Top Bar
Code:
HKEY_LOCAL_MACHINE\nls\overrides
1. Creat new String value with Name = S1159 & Data = Am
2. Creat new String value with name = S2359 & data = Pm
3. Creat new String value with name = STFmt & data = h:mm tM
- capital letters and small letters must be followed exactly or it may cause hard resets!
- you will get capital "AM/PM" on the top bar eventhough the registry data value above was entered as "Am/Pm"
Change The Date on The Top Bar
Code:
HKEY_LOCAL_MACHINE\nls\overrides
Look for String value SSDte (short date) and change the value data, some example of date formats i have used below:
- "7 May 05, Friday" by changing the String value SSDte data = d MMMM yy, dddd
- "07/05/2005, Fri" by changing String value SSDte data = dd/MM/yyyy, ddd
Clear Type on LandscapeDisplay
You'll get clear type font in landscape mode. made me dizzy though..not much functionality value..just some fun factor for us curious ones.
Code:
HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSetting
1. Change value data of OffOnRotation from 1 to 0
2. Soft reset
Setting Cleartype Text in PIE
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
"ClearTypeText"<- Set 1 to Enable Cleartype in PIE, 0 to Disable
Setting ClearType Text in Pocket PC
Optionally, you can go to START>SETTINGS>SYSTEMS>SCREEN>CLEARTYPE
Code:
HKEY_LOCAL_MACHINE\System\GDI
Create a Subkey then Name it "CLEARTYPE"
Settings Screen Text Size
Optionally, you can go to START>SETTINGS>SYSTEMS>SCREEN>TEXT SIZE
Code:
HKEY_LOCAL_MACHINE\ControlPanel\Stylus\96DPI
"CurFont"= change to the ff value ..
dword:00000258 -> Smallest
dword:000002BC -> Smaller
dword:00000320 -> Normal/Default
dword:000003E8 -> Larger
dword:0000044C -> Largest
Thanks to [email protected] for the original post.
I have not tested all of these tweaks on my Mini. Please let me know if any of them are not working, or if you have any of your own tweaks which are not listed :roll:
I tryed Change The Date on The Top Bar now, and a Warning there, becouse when you done that i softreset, the phone wont start upp again.. =(( anyone have a solution? please help..
RanZor said:
I tryed Change The Date on The Top Bar now, and a Warning there, becouse when you done that i softreset, the phone wont start upp again.. =(( anyone have a solution? please help..
Click to expand...
Click to collapse
May be a hard reset would help :?
That is what i dont whant to do.. have no backup=((
Anyone know why it dident work?
Is the Mini the same as I-mate Jam and Qtek S100?
I dont know any other solution for you :? except for a hard reset.
Try SBP Pocket PC tips and tricks. Almost all of the mentioned tweaks are supported by this program & only softreset required to get them activated. Plus no hacking in the registry by hand, just set an option . I got my time & date in the top bar for instance working flawless.
Got two extra hacks for speeding up file browsing:
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\CacheSize=4096
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\EnableCache=0x1(1)
Cheers, M
Nice work, bhai. Did some of the tweaks and they work well.
Thanks.
Disable Dialer Number Format
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\IntelliDialer\bShowFormatChar
Value: 0 by default, Set to 1
nonentity said:
Disable Dialer Number Format
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\IntelliDialer\bShowFormatChar
Value: 0 by default, Set to 1
Click to expand...
Click to collapse
What does this do?
get rid of the regional brackets and spaces in the dialer...
ex. <###> ### #### = ##########
cheers
the DELIVER NOTIFICATION doesnt work, i wish this one's working, i really need this kind of program specially here in philippines.
great tweak......most of them work, tnx :wink:
my mistake.....the SMS DELIVER NOTIFICATION.
What key should I change to 1? is it default?
and where can I see the frame rate? camera ? video?
Thanks
hitu said:
Enable camera frame rate display
Camera frame rate will appear on the screen when u're using the camera
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CAMERA\AppDefSettings\General
Default: 0
Changed: 1
Click to expand...
Click to collapse
televisi said:
What key should I change to 1? is it default?
and where can I see the frame rate? camera ? video?
Thanks
hitu said:
Enable camera frame rate display
Camera frame rate will appear on the screen when u're using the camera
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\CAMERA\AppDefSettings\General
Default: 0
Changed: 1
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I think i've changed the frame rate to 1... and it came up when i turn my camera on
i cant find the string value for Change The Date on The Top Bar tweaks... btw i have chinese rom not english one
guys, would you kindly guide me how to make change the registry? I've download the Total Commander (I've heard to make chabge the registry we need to install this program), but after Ive install the Total Commander, what next?
In Windows xp, to change the registry I only enter 'regedit' from start menu -> then Run, so how to enter the registry menu in the WM2003
(by the way I use the O2 mini)
many thanks for your guide.
Camrea "Save Folder" Tweak
check it out http://oldsap.blogspot.com/2006/04/ppc-camera-save-folder-tweak.html
Does anyone know of a tweak that can hide/remove the envelope when a sms message arrives?
do it with pockenzenphone, then find the reg key....
nurrochmat said:
guys, would you kindly guide me how to make change the registry? I've download the Total Commander (I've heard to make chabge the registry we need to install this program), but after Ive install the Total Commander, what next?
In Windows xp, to change the registry I only enter 'regedit' from start menu -> then Run, so how to enter the registry menu in the WM2003
(by the way I use the O2 mini)
many thanks for your guide.
Click to expand...
Click to collapse
Run totalcommander, tap on the root '\\' then select 'registry'. find ur key.
Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
EDGE [E] icon instead of GPRS [G]
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
GPS icon and settings in start-settings-connections
HKLM\ControlPanel\GPS Settings, make a Dword Group=2, delete the string "redirect".
Change Scroll Bar (Smaller)
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
Cleartype in landscape mode
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=0
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
I hope all 818pro/Prophet user can share any new registry hack in this post.
MOD EDIT:
This is also in the wiki
http://wiki.xda-developers.com/index.php?pagename=Prophet_Hacks_WM5
THX for the info.
But any hack for CHT ver. using smartdailer??
THX
Enable your built-in Lunar calendar (for WWE Rom)
enable your built-in Lunar calendar (for WWE Rom)
edit your registry:
Hkey_Local_Machine\Software\Microsoft\Calendar
set the value of "ShowLunarCalendar" to 1
then soft-reset (Optional)
open your calender program and click the on right-bottom Menu -> View -> Lunar
Enjoy
sas90850 said:
Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
EDGE [E] icon instead of GPRS [G]
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
GPS icon and settings in start-settings-connections
HKLM\ControlPanel\GPS Settings, make a Dword Group=2, delete the string "redirect".
Change Scroll Bar (Smaller)
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
Cleartype in landscape mode
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=0
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
I hope all 818pro/Prophet user can share any new registry hack in this
post.
Click to expand...
Click to collapse
I can't find flags2 in controlpanel/phon
I have only default-alllang-goup-resdll
This one works too... (from a previous wizard tweak i think)
Unlock hidden rom:
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000000
marcov said:
sas90850 said:
Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
EDGE [E] icon instead of GPRS [G]
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
GPS icon and settings in start-settings-connections
HKLM\ControlPanel\GPS Settings, make a Dword Group=2, delete the string "redirect".
Change Scroll Bar (Smaller)
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
Cleartype in landscape mode
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=0
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
I hope all 818pro/Prophet user can share any new registry hack in this
post.
Click to expand...
Click to collapse
I can't find flags2 in controlpanel/phon
I have only default-alllang-goup-resdll
Click to expand...
Click to collapse
Create new value. Make sure you use DWORD.
marcov said:
sas90850 said:
Change the photo storage location to storage card
HKEY_LOCAL_MACHINE\Software\HTC\Camera\Image\Saveto
0 change 1
EDGE [E] icon instead of GPRS [G]
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon" value="1"
(Original Value = 0)
GPS icon and settings in start-settings-connections
HKLM\ControlPanel\GPS Settings, make a Dword Group=2, delete the string "redirect".
Change Scroll Bar (Smaller)
Change the width of the vertical scroll bar and the height of the horizontal scroll bar so they take less room on the screen:
HKEY_LOCAL_MACHINE\System\GWE
Change cxVScr to (say) 9 to make vertical scrollbar narrower. Default value is 13
Change cyHScr to (say) 9 to make horizontal scrollbar narrower. Default value is 13
Cleartype in landscape mode
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=0
Add a 'Disconnect' button (and Timer) to the Connection List for GPRS
To add a Disconnect button:
HKLM\ControlPanel\Phone\Flags2 = 8 (DWORD decimal)
To add a Disconnect button and a timer display showing how long GRPS is in use for the session:
HKLM\ControlPanel\Phone\Flags2 = 16 (DWORD decimal)
To disable both the Disconnect button and the timer:
HKLM\ControlPanel\Phone\Flags2 = 0 (DWORD decimal)
I hope all 818pro/Prophet user can share any new registry hack in this
post.
Click to expand...
Click to collapse
I can't find flags2 in controlpanel/phon
I have only default-alllang-goup-resdll
Click to expand...
Click to collapse
Create new value. Make sure you use DWORD.
Speed Improvement
1.HKEY_LOCAL_MACHINE\SYSTEM\GDI\GLYPHCACHE
Change 'limit' Value data to 32768
Original Value = 131072
2.HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\FATFS
Change 'CacheSize' Value data to 4096
Original Value = 0
3.HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\Filters\fsreplxfilt
Change 'ReplStoreCacheSize' Value data to 4096 or 8192
Original Value = 0
4.HKEY_LOCAL_MACHINE\SYSTEM\StorageManager\Profiles\MSFlash\FATFS
Change 'DataCacheSize' Value data to 4096
Change 'Flags' Value data to 40
For Step 4, if your PDA don't have this registry, add new registry and use DOWORD value.
Disable menu animations to increase performance:
"HKEY_LOCAL_MACHINE \SYSTEM\GWE\Menu"
Change "AniType" from "6" (default) to "0" (disabled).
Make sure bluetooth is alive during a conversation. If you ever have trouble with BT timing out, try:
HKEY_Current_User\ControlPanel\Phone
Change the Sleep key from a 1 to 0.
Re: This one works too... (from a previous wizard tweak i th
Gnuig said:
Unlock hidden rom:
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000000
Click to expand...
Click to collapse
Do this mean the extended rom??
Wi-fi Tweak
[HKEY_LOCAL_MACHINE\Comm\TNETWLN1\parms]
"dot11SupportedRateMaskG"=DWORD:8 Hex
mamakap said:
Wi-fi Tweak
[HKEY_LOCAL_MACHINE\Comm\TNETWLN1\parms]
"dot11SupportedRateMaskG"=DWORD:8 Hex
Click to expand...
Click to collapse
What does this WIFI tweak do for the device? I thought it was natively Wireless G?
mcnasby said:
mamakap said:
Wi-fi Tweak
[HKEY_LOCAL_MACHINE\Comm\TNETWLN1\parms]
"dot11SupportedRateMaskG"=DWORD:8 Hex
Click to expand...
Click to collapse
What does this WIFI tweak do for the device? I thought it was natively Wireless G?
Click to expand...
Click to collapse
You can read the source from here
Do we need these registry hacks with the new ROM (AKU2)?
Is there a hack to put the date & time in the title bar on ALL screens (including the today screen)?
(AKU 2.0 removes the time from the title bar when viewing the today screen.)
Urban Strata said:
Is there a hack to put the date & time in the title bar on ALL screens (including the today screen)?
(AKU 2.0 removes the time from the title bar when viewing the today screen.)
Click to expand...
Click to collapse
I actually installed the date & time reg hack from this thread in the Universal forum: http://forum.xda-developers.com/viewtopic.php?t=41968
It works on my Prophet with AKU 2.0, but it shows the date in European format (e.g., 28 . 03 for March 28). Hate to be a stupid American, but I'd prefer the month and day switched to 3-28. I wonder if that's possible?[/url]
Re: This one works too... (from a previous wizard tweak i th
wyhpower said:
Gnuig said:
Unlock hidden rom:
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000000
Click to expand...
Click to collapse
Do this mean the extended rom??
Click to expand...
Click to collapse
Yes... extrom2 to be exact.
Sorry for the confusion.
G.
PS. Still can't change writeprotected stuff though... anyone?
Re: This one works too... (from a previous wizard tweak i th
wyhpower said:
Gnuig said:
Unlock hidden rom:
HIDDEN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000001
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000001
SHOWN:
[HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\TRUEFFS_DOC1] "Bootphase"=dword:00000002
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\TRUEFFS_DOC1] "MountHidden"=dword:00000000
Click to expand...
Click to collapse
Do this mean the extended rom??
Click to expand...
Click to collapse
Yes... extrom2 to be exact.
Sorry for the confusion.
G.
PS. Still can't change writeprotected stuff though... anyone?
Urban Strata said:
Urban Strata said:
Is there a hack to put the date & time in the title bar on ALL screens (including the today screen)?
(AKU 2.0 removes the time from the title bar when viewing the today screen.)
Click to expand...
Click to collapse
I actually installed the date & time reg hack from this thread in the Universal forum: http://forum.xda-developers.com/viewtopic.php?t=41968
It works on my Prophet with AKU 2.0, but it shows the date in European format (e.g., 28 . 03 for March 28). Hate to be a stupid American, but I'd prefer the month and day switched to 3-28. I wonder if that's possible?[/url]
Click to expand...
Click to collapse
hi there, i believe you can still change the date representation in regional settings.
Tried the software on a Pro flashed S200 ROM, however, i still have the battery on the today screen. On other apps, it works fine.
Also, with wm5 v 2 (the one with aku2), i can't seem to get phone pad to start as default.
tried this already:
HKEY_CURRENT_USER\ControlPanel\SIP
"DefaulfIM" --> {51A2CB38-154E-4C92-A625-A83871C99EC2}
Although the key remains the same after reboots, and its the same key that's found in CLSID, the keyboard is defaulted after every reboot.
thescum said:
Also, with wm5 v 2 (the one with aku2), i can't seem to get phone pad to start as default.
tried this already:
HKEY_CURRENT_USER\ControlPanel\SIP
"DefaulfIM" --> {51A2CB38-154E-4C92-A625-A83871C99EC2}
Although the key remains the same after reboots, and its the same key that's found in CLSID, the keyboard is defaulted after every reboot.
Click to expand...
Click to collapse
Yes, the keyboard is default no matter what reg hacks I try either. Tweaks2k2 and sktools tweaks don't work either. I think it's a wm5 thing and I can't figure it out.
Has anyone tried to play with the HTCHomePlug today page plug in? I have observed the following:
Registry entry at
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HTCHomeplug\
2,3,4 are used. 4 is used by the HTC Connect.
The keys for each are:
iconindex - decimal
ResPath - file containing the icon
LaunchApPath - application executable
examples are:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HTCHomeplug\4]
"iconindex" = Decimal:"0"
"ResPath" = "\windows\iexplore.exe"
"LaunchApPath" = "\windows\iexplore.exe"
I have tried wmplayer.exe and fexplore.exe and all worked.
Seems that the maximum number is 6. 7 onwards are ignored?
The icon for iexplore and wmplayer at index 0 do not look very nice. iexplore's is great.
Here...
Hi,
have a look here:
http://forum.xda-developers.com/showthread.php?t=286651
Bye
[email protected]
chaicl said:
Has anyone tried to play with the HTCHomePlug today page plug in? I have observed the following:
Registry entry at
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HTCHomeplug\
2,3,4 are used. 4 is used by the HTC Connect.
The keys for each are:
iconindex - decimal
ResPath - file containing the icon
LaunchApPath - application executable
examples are:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\HTCHomeplug\4]
"iconindex" = Decimal:"0"
"ResPath" = "\windows\iexplore.exe"
"LaunchApPath" = "\windows\iexplore.exe"
I have tried wmplayer.exe and fexplore.exe and all worked.
Seems that the maximum number is 6. 7 onwards are ignored?
The icon for iexplore and wmplayer at index 0 do not look very nice. iexplore's is great.
Click to expand...
Click to collapse
actually I got 9 icons to show up on the Homeplug...Yay.
Hi all, on my M3100 there was a program called pimp my black which allowed you to not only get rid of the annoying battery icon and replace it with the time but also the date in the top right of the screen. Does anyone know how of if this is possible on the Touch Dual yet?
thanks
I would like this as well.
To show both the date and the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 3 (DWORD decimal)
JIC you might need more.
To show just the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 1 (DWORD decimal)
To show both the date:
HKLM\Software\Microsoft\Shell\TBOpt = 2 (DWORD decimal)
thescum said:
To show both the date and the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 3 (DWORD decimal)
JIC you might need more.
To show just the clock:
HKLM\Software\Microsoft\Shell\TBOpt = 1 (DWORD decimal)
To show both the date:
HKLM\Software\Microsoft\Shell\TBOpt = 2 (DWORD decimal)
Click to expand...
Click to collapse
Ok, I need some help please, I get as far as HKLM\Software\Microsoft\Shell then the TBOpt is not there, Taskbar is there so I changed that to 3 and then reset and I have no clock at all when in screens other than home screen. Any advise.
seal said:
Ok, I need some help please, I get as far as HKLM\Software\Microsoft\Shell then the TBOpt is not there, Taskbar is there so I changed that to 3 and then reset and I have no clock at all when in screens other than home screen. Any advise.
Click to expand...
Click to collapse
Change taskbar back.
If TBOpt is not there, create a key by the same name.
then add the dword (decimal) 3
ok that works! for others you will need to set "ShowTitleBarClock"=1 otherwise it gets a little congessted in that area!
thescum said:
Change taskbar back.
If TBOpt is not there, create a key by the same name.
then add the dword (decimal) 3
Click to expand...
Click to collapse
OK I created a New Key under Shell and then while it was highlighted I pressed edit at bottom of screen and pressed "New DWORD Value" and under "Value Name" I entered TBOpt and in "Value data:" I entered 3 and the "Base" was Decimal. IS THIS CORRECT???
ALSO:
swhite17 said:
ok that works! for others you will need to set "ShowTitleBarClock"=1 otherwise it gets a little congessted in that area!
Click to expand...
Click to collapse
Sorry not the fastest with this stuff, where do I find "ShowTitleBarClock" so I can change the setting?
What you need to do is create a new DWORD value (TBOpt) under the Shell key, do not create a new key. Under the current Shell key you should only have the value ShowTitleBarClock which is what you need to change and the TBOpt value you created.
Thanks heaps, all is working now.
One last question, I have the date above the time which is fine but the date is 6/01/0 the last digit is missing, is there a way to edit this to fix the problem or even get rid of the year as I can usually remember what year it is but month and date I need very bad.......
Hmm mine is using UK time so the format only cuts of the last digit of the year for me. It uses the Short date format from within the Date tab within regional settings so maybe you can alter that to appear like mine? the weird thing is on my M3100 it is set exactly the same but instead of showing 05/01/08 it only shows 05 Jan, weird. Maybe someone else knows
That would be perfect, that format "5 Jan" ..... Does anyone know how to get this format for the date?
seal said:
That would be perfect, that format "5 Jan" ..... Does anyone know how to get this format for the date?
Click to expand...
Click to collapse
Goto settings\regional settings and under the "Date" Tab:
For short Date choose one of the presets: dd-MMM-yy
for "Date Seperator", choose space instead of the default "-" (dash).
Unfortunately you can't change the presets, so the option suggested above is the closest you can get.
thescum said:
Goto settings\regional settings and under the "Date" Tab:
For short Date choose one of the presets: dd-MMM-yy
for "Date Seperator", choose space instead of the default "-" (dash).
Unfortunately you can't change the presets, so the option suggested above is the closest you can get.
Click to expand...
Click to collapse
I tried "space" and it still didn't fit, then I tried a "." and it fits perfect, I don't know what will happen when the day becomes 2 digits it might be out again but thanks heaps for your help you have fixed my problem.
seal said:
I tried "space" and it still didn't fit, then I tried a "." and it fits perfect, I don't know what will happen when the day becomes 2 digits it might be out again but thanks heaps for your help you have fixed my problem.
Click to expand...
Click to collapse
glad to be some kinda help
ok i managed to display the clock on the title bar but can i remove the battery indicator from the title bar completely ?
anyone have screenshot ???
Can anyone post the text to enter into the registry for me... totally new at this, but I just want the clock back on my today screen.
Thanks
great said:
ok i managed to display the clock on the title bar but can i remove the battery indicator from the title bar completely ?
Click to expand...
Click to collapse
So far I've managed to get no less than two battery indicators when I'm on the home screen, and one when in a program.
What I want is neither clock or battery indicator on the title bare.
I'm running mobile 6, and have tried to set the TbOption in HKLM\software\ms\shell to 0, and the ShowTitleBarClockthingy to 0. This results in a empty space where the clock used to be, and a somewhat sluggish performance, as well as the icon next to (signal strength) to be cut in half, so not a good solution at all.
So I tried to remove the new key, and use KaizerTweak, which resulted in good performance, but two indicators... me confused be
All I wanted was nothing!
Sort of new to WinMobile 6, so It's probably some noobism in me as well.
br
Vegar
Hi
Anyone knows keycodes (KeyEventArgs) for buttons: Back, Volumne up / down on HTC Touch Pro2?
For now i got only this keys:
- Talk - 0x3D
- End - 0x3E
- Windows - 237
I kinda need rest of them.
http://www.google.com/search?q="windows+mobile"+key+codes
MarcLandis said:
http://www.google.com/search?q="windows+mobile"+key+codes
Click to expand...
Click to collapse
Great, but... according to this page http://msdn.microsoft.com/en-us/library/bb431750.aspx talk key value is 0x72 but in ppc_phone_480x800.xml emulator file this key value is 0x3D, so which one is correct?