Database Users

Unbricking mytouch/g1 ( soft bricks only but no harm trying )

I found a site with someone who bricked their phone but found a loop hole. I have never bricked my phone and hoping i never will but for those who have bricked their phone here are some steps to try to unbrick it! HOPE IT HELPS! SEND FEED BACK!!
So you can’t access bootloader or recovery and the only thing that works is the blue led trick when pressing trackball + power button??
Try the procedure below.
Step 1: Turned Phone off by taking out the battery.
Step 2: Prepared SD card
Put SD card in card reader and formatted it as FAT32, copied the DREAIMG.nbh onto it.
Or try Sapphimg.nbh
Step 3: Put SD card back in phone
Step 4: Hold Vol down + Power + track ball together and put battery to start phone
Step 5: Run update
IF THAT DIDNT WORK!
TRY THIS!
Step 1: Turning Off Your Phone
Because you have a bricked phone, you can't just hold the power button. So if your phone is not already off then you're going to want to take out the battery.
Step 2: Preparing Our SD card
Take out your SD card and put it into an SD card reader or some type of other adapter so that we can view it from our computer. If you cannot view the SD card on your computer then you're going to need a new SD card.
Download DREAIMG-RC29.zip and unzip the file.
Reformat the SD card to FAT32 and copy the DREAIMG.nbh onto it.
Safely eject the SD card.
Put the SD card into your device.
Step 3: Wipe The Phone
Hold home and press the power button.
When you see the image of an ! mark, open your keyboard and press Alt + L if you cannot see any command options.
Do a factory reset by pressing Alt + W or just using the trackball.
When the reset is done, go ahead and hold the camera button and select the reboot system now option with your trackball.
Step 4: Flashing The Phone
Once the grey screen pops up (or the white screen if your phone was rooted with JesusFreke) it will ask you to hit a button to start installing the image…press that button. DO NOT DO ANYTHING TO STOP THIS PROCCESS. It will take about 8-12 minutes.
When the image has completed the installation (it will say completed), go ahead and press the green, red, and menu buttons at the same time. The phone will reboot.
And your done! Your phone is now unbricked!.
The G1 screen will hang there for a good minute or two, but be paticiant, it will boot. Now you have a choice. Try to hack your phone again, because you're in the correct state to have another go, or, you can stick with the official Android. Now if you choose to stick with the official Android, here's what you do.
Step 1: Upgrading to Android 1.0 RC33
Download the file signed-PLAT-RC33-from-RC30.zip
Rename the file to update.zip and copy it to your SD card
Reboot your phone into recovery mode. Power off the phone first and then hold down the Home key while powering it back on.
The recovery mode is finished loading when you see the ! mark inside the triangle. Press Alt + L to display the list of options.
Press Alt + S to flash the file update.zip.
Wait for the update to apply. Your phone may reboot during this process so be patient.
Press Home + Back if prompted to reboot your phone.
Step 2: Upgrading to Android 1.5 CRB43
Download the file signed-kila-ota-148830.de6a94ca.zip
Repeat the steps from above to flash the update file.
Step 3: Upgrade to Android 1.5 CRC1
Download the file signed-kila-CRC1-from-CRB43-FIX.7ca4a1d7.zip
Repeat the steps from above to flash the update file.
Step 4: Upgrade to Android 1.6 DRC83
Download the file signed-kila-DRC83-from-CRC1.c41b93c1.zip
Repeat the steps from above to flash the update file.
PM FOR THE DIRECT WEBSITES!

sad cause this will get locked soon.

domuhhnic said:
sad cause this will get locked soon.
Click to expand...
Click to collapse
why? all we need is someone who can confirm this is true on xda and it will be stickied EVERYWHERE

LOCKED?
domuhhnic said:
sad cause this will get locked soon.
Click to expand...
Click to collapse
Why will this get locked??

Yuppie
oshizzle1991 said:
why? all we need is someone who can confirm this is true on xda and it will be stickied EVERYWHERE
Click to expand...
Click to collapse
Exactly .. but i dont know anyone with a bricked phone so i cant ask them if it works.. if it gets locked (whatever that means) i'll repost it!

id be interested to see if this works... although its assuming you have a dream/g1 .. did you post this in the g1 section?

POST?
digitaljeff said:
id be interested to see if this works... although its assuming you have a dream/g1 .. did you post this in the g1 section?
Click to expand...
Click to collapse
Yes, I have a HTC MAJIC/MYTOUCH .. nope i have not posted it there but i will now

i tried to update radio and now :
So you can’t access bootloader or recovery and the only thing that works is the blue led trick when pressing trackball + power button??
Try all of this methods , but no result..
phone just shows htc magic when i turn it on usually, and nothing!
what can i do?

...
Im still looking of ways to unbrick phones

Possible hint!
Has anyone tried using adb .. Reflashing the recovery img??

...another hint..
kemimarie said:
Has anyone tried using adb .. Reflashing the recovery img??
Click to expand...
Click to collapse
run fastboot boot recovery-image.img or whatever you named your recovery image. It'll display "waiting for device..." message just keep pluging it in, unplugging, popping the battery and eventually your device will respond and boot into recovery.
Someone bricked and i did it... twice trying to flash the eng 2010 SPL. It worked the third time and my device is up and running again with an engineering SPL.
if your device is stuck on the first splash but displays in red "Fastboot USB" message in the upper left corner of the screen, DO NOT power it down. run the above mentioned command and reflash.

deleted... double post.

Found another hint
ch3w said:
confirmed...
-I Connected USB.
-I inserted the battery.
-I booted the phone while holding the HOME key.
-The phone still froze at the first splash screen, but then suddenly, the waiting fastboot command detected the phone and booted the recovery image!
Click to expand...
Click to collapse
try that on your g1/mytouch!

kemimarie said:
try that on your g1/mytouch!
Click to expand...
Click to collapse
this method worked on my second bricked magic, still trying it on the first one but... no luck yet. i had the same problem with both of them tho

kemimarie said:
run fastboot boot recovery-image.img or whatever you named your recovery image. It'll display "waiting for device..." message just keep pluging it in, unplugging, popping the battery and eventually your device will respond and boot into recovery.
Someone bricked and i did it... twice trying to flash the eng 2010 SPL. It worked the third time and my device is up and running again with an engineering SPL.
if your device is stuck on the first splash but displays in red "Fastboot USB" message in the upper left corner of the screen, DO NOT power it down. run the above mentioned command and reflash.
Click to expand...
Click to collapse
fastboot boot recovery?
boot.img and recovery.img are two totally different things.
The recovery (amon_ra is preferred)
The boot.img is where the kernel, ramdisk, etc resides.
you must've meant fastboot flash boot boot.img
or
fastboot flash recovery recovery.img
but not both.

ch3w said:
this method worked on my second bricked magic, still trying it on the first one but... no luck yet. i had the same problem with both of them tho
Click to expand...
Click to collapse
YAAYY!! Im glad to hear you say you had some success!

Binary100100 said:
fastboot boot recovery?
boot.img and recovery.img are two totally different things.
The recovery (amon_ra is preferred)
The boot.img is where the kernel, ramdisk, etc resides.
you must've meant fastboot flash boot boot.img
or
fastboot flash recovery recovery.img
but not both.
Click to expand...
Click to collapse
I just copied and pasted from a website.. THEY did that and it worked for them lol

bricked Mytouch3g
Bricked mytouch3g -- brandnew phone. Just tried to flash cyanogen test3 and everything went fine but then I rebooted and all I have is vodafone boot screen, nothing else works but the blue led which will not load any img. adp doesn't work it never detects a phone no matter what you do. It was the first flash too. Crazy how HTC didn't make a built in hard reset like you have on windows mobile phones. You wonder if they want people to crash there phones so they have to replace them ect etc.

Hello.
My phone has the same problem.
Anything that is needed done. But no no avail.
My phone is brick.
Help help help

Mod edit: not dev related, moved to general

Magic stuck in boot loop! HELP!!

I have a rooted Rogers magic and dont know what happend...but its stuck in a boot loop. All it gets to is the "HTC MAGIC" screen and then the out of box image shows up and then it restarts and does this again and again.
I cant enter recovery or fastboot. ive tried the diff key combinations to boot but nothin works.
ANy help!!???

If you can't get into a recovery, or fastboot from my understandings you now have a very expensive paper weight.

Mine did the same, randomly or because i pressed some combination the phone booted again. Sometimes pressing backspace i enter the menu, pressing home+power... nothing.
One or two times pressing home+power enters the menu and then reboots by itself.
Any ideas?

It's happened to me once.
Does anything come up with your computer?
Can you access adb?
Try removing the battery then hold down the menu button.
While still holding menu put the battery back in.
The phone should start up. Keep holding the menu button until you are blue in the face (or for about 30 seconds or so) or until the phone boots.
If that doesn't work try the back button instead of the menu button like above.
If THAT doesn't work... then find a stack of papers and place them in front of a fan. Place your phone onto the stack of papers and let it sit...
Or try calling your provider because you might still be under warranty.

ok guys it on now.
Its working but for some reason it wont read my sd card :S
turns out my bro flashed a recovery he shouldnt hav so it kept rebootin evenwhen i tried entering recovery. i erased it thinkin that ill flash a new recovery...but it wont recognize my sd card. ive tried 3 diff cards...but nothin works.
even in the rom, i get the notification: "SD Card has been removed. Insert a new SD card to increase your device storage."
i cant get the card to work HELP??
........how do i even flash anything without the card?

You can flash through fastboot
Sent from my Epic myTouch 3G using XDA app.

Flash through fastboot like he said and it should read your SD card with a new ROM.

any links to a tutorial on how to flash through fastboot??
thanks in advance!!!

hassan3216 said:
any links to a tutorial on how to flash through fastboot??
thanks in advance!!!
Click to expand...
Click to collapse
Nope. There are no links or tutorials at all anywhere on the web. They do not exist. Except for maybe this one:
http://forum.xda-developers.com/showpost.php?p=4066552&postcount=2
... and about 5,539 more. But yeah... other than those... the answer is no.

The Sapphire Wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire_Hacking
Click to expand...
Click to collapse
is also somewhere you should look if you need help rooting.

please help can i recover my magic stuck in box image shows up
without jtag ?
helppppppppppppp

NIRANIK said:
please help can i recover my magic stuck in box image shows up
without jtag ?
helppppppppppppp
Click to expand...
Click to collapse
It you have bootloop - remove battery you turn phone off. Wait a few minutes and place battery back.
Then try flash turn phone on by pressing and holding Back + Power (fastboot-mode)
Write first five rows here (all symbols are important).
It you will have problems, try to load phone into other modes:
Home + Power - recovery-mode
VolumeDown + Power - hboot-mode
Sent from my A7-040 using Tapatalk

no way out
I tried but nothing happend
just a screen with box and yello arrow refers to a mobile
any way thank you sir

NIRANIK said:
I tried but nothing happend
just a screen with box and yello arrow refers to a mobile
any way thank you sir
Click to expand...
Click to collapse
Can you load phone into any mode?
Sent from my NookColor using Tapatalk

first thank you for your time
no I can not enter any mode no fast-boot no recovery -- only the power bottom can be recognized

NIRANIK said:
no I can not enter any mode no fast-boot no recovery -- only the power bottom can be recognized
Click to expand...
Click to collapse
Too bad
It seems like phone flashed by faulty hboot or radio (uncompleted download or something else)
Try disconnect phone from pc or adapter and remove battery for 10-15 minutes
May be it cancels this process.
To restore phone you need to run hboot-mode or fastboot-mode - if you don't then only JTAG can help

im stuck!!!!! already

i just rooted my phone 10 minutes ago and now i cant get into recovery to restore the back up i made. the only recov i can get into is H-boot then from there it just gets stuck at the htc white screen.. did i brick it ???? i cant find any recent posts on this please help AGAIN sorry

stevo760 said:
i just rooted my phone 10 minutes ago and now i cant get into recovery to restore the back up i made. the only recov i can get into is H-boot then from there it just gets stuck at the htc white screen.. did i brick it ???? i cant find any recent posts on this please help AGAIN sorry
Click to expand...
Click to collapse
So you are at the white screen that says hboot? It should be the second option on that screen saying recovery, use the volume keys to move to it, then use the power button to select it.
Sent from my Xoom using Tapatalk

you can boot into your rom and then reflash recovery, I flash mine a few times as rarely its there the first time

Grab the PC36IMG.zip file from the Amon Ra thread and put it on your SD card. Boot to the bootloader, let it find the file, and update to flash the amon ra recovery. I hate clockworkmod. It's never been as consistent for me as Amon Ra.

you wiped your boot or system partition didn't you?
hold volume down while turning your phone on and it should bring a menu with three android guys at the bottom, once there use the volume buttons to select recovery and then push power to select it. That will get you into the recovery where you can flash a ROM. If it doesn't let you get into the recovery from there and you still have the autoroot folder on your computer you can run the file 'FlashZip' script and tell it to flash the SprintLovers_AmonRA... file. Just put it in fastboot mode before hand by selecting fastboot instead of recovery from the hboot

bwcorvus said:
So you are at the white screen that says hboot? It should be the second option on that screen saying recovery, use the volume keys to move to it, then use the power button to select it.
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
i did that and i just takes me to a black screen with a triangle in it

xHausx said:
you wiped your boot or system partition didn't you?
hold volume down while turning your phone on and it should bring a menu with three android guys at the bottom, once there use the volume buttons to select recovery and then push power to select it. That will get you into the recovery where you can flash a ROM. If it doesn't let you get into the recovery from there and you still have the autoroot folder on your computer you can run the file 'FlashZip' script and tell it to flash the SprintLovers_AmonRA... file. Just put it in fastboot mode before hand by selecting fastboot instead of recovery from the hboot
Click to expand...
Click to collapse
you gotta help me man!!!! how do i flash just the recovery in auto root commands??????

stevo760 said:
you gotta help me man!!!! how do i flash just the recovery in auto root commands??????
Click to expand...
Click to collapse
It sounds like you have the old debug firmware installed, the screen with the red triangle is the stock recovery. Pushing vol up + power in it should bring up a menu although there is nothing in there that is of use except reboot.
With the triangle showing on your phone run the FlashZip script and it should reboot you in to the bootloader, once it does that hit enter when it warns you about your bootloader being unlocked and it will give a list of different PC36IMG files. You'll want to flash the one that says SprintLovers-AmonRA to make sure everything is up to date.

xHausx said:
It sounds like you have the old debug firmware installed, the screen with the red triangle is the stock recovery. Pushing vol up + power in it should bring up a menu although there is nothing in there that is of use except reboot.
With the triangle showing on your phone run the FlashZip script and it should reboot you in to the bootloader, once it does that hit enter when it warns you about your bootloader being unlocked and it will give a list of different PC36IMG files. You'll want to flash the one that says SprintLovers-AmonRA to make sure everything is up to date.
Click to expand...
Click to collapse
in the triangle recovery screen no button will bring up any menu... i think im ****ed man this blows

stevo760 said:
in the triangle recovery screen no button will bring up any menu... i think im ****ed man this blows
Click to expand...
Click to collapse
what did it say when you ran the FlashZip script?

stevo760 said:
in the triangle recovery screen no button will bring up any menu... i think im ****ed man this blows
Click to expand...
Click to collapse
i can do it in fast boot mode but as soon as i select number 1 and press enter the dos screen goes away and nothing happens

stevo760 said:
i can do it in fast boot mode but as soon as i select number 1 and press enter the dos screen goes away and nothing happens
Click to expand...
Click to collapse
k, it's not working right then. Can you do me a favor and use the StartShell file then run it from there. If it fails again right click -> select all and then copy and paste it.
To run it from the dos prompt just type flashzip and enter

xHausx said:
k, it's not working right then. Can you do me a favor and use the StartShell file then run it from there. If it fails again right click -> select all and then copy and paste it.
To run it from the dos prompt just type flashzip and enter
Click to expand...
Click to collapse
[1] C:\Documents and Settings\Steven Cirocco\Desktop\AutoRoot_v2.3\res\PC36IMG-S
printLovers-AmonRA_2.3-hausmod.zip
[2] C:\Documents and Settings\Steven Cirocco\Desktop\AutoRoot_v2.3\res\PC36IMG_A
monRA-v2.3-hausmod.zip
[3] C:\Documents and Settings\Steven Cirocco\Desktop\AutoRoot_v2.3\res\PC36IMG_U
D.zip
[4] Cancel
Type a number and press Enter/>1
ERROR: File 'C:\Documents' does not exist!
C:\Documents and Settings\Steven Cirocco\Desktop\AutoRoot_v2.3>

xHausx said:
k, it's not working right then. Can you do me a favor and use the StartShell file then run it from there. If it fails again right click -> select all and then copy and paste it.
To run it from the dos prompt just type flashzip and enter
Click to expand...
Click to collapse
if you can fix this world of **** im in im donating for sure dude

ok, I see what it's doing. Copy and paste the following into the prompt to do it manually
Code:
fastboot oem rebootRUU
Code:
fastboot flash zip res\PC36IMG-SprintLovers-AmonRA_2.3-hausmod.zip
then once it finishes...
Code:
fastboot reboot

xHausx said:
ok, I see what it's doing. Copy and paste the following into the prompt to do it manually
Code:
fastboot oem rebootRUU
Code:
fastboot flash zip res\PC36IMG-SprintLovers-AmonRA_2.3-hausmod.zip
then once it finishes...
Code:
fastboot reboot
Click to expand...
Click to collapse
it says sending zip with blinking cursor and no status meter on my phone but it does say htc

stevo760 said:
it says sending zip with blinking cursor and no status meter on my phone but it does say htc
Click to expand...
Click to collapse
give it a second, it's a big file

xHausx said:
give it a second, it's a big file
Click to expand...
Click to collapse
ok it finished it rebooted and now its at htc quality brilliant screen for 2 minutes and counting

When I experienced the red triangle and inability to boot into recovery, following step #10 of the link below pushed a temporary recovery onto the phone.
http://forum.xda-developers.com/showthread.php?t=829045
You still need to flash (by some means), a permanent recovery.
You can do so using either the PC36IMG.zip method, adb shell, or through console.

holy f !!!!! you developin son of *****!!!!! you are the man!!!!! you literally just saved my life i just got this phone yesterday and my girlfreind is on her way to kill me... so now what do i do about recovery and am i still rooted... and how do i give you money???

[Q] Need Help! Bricked?

Ok so I have been running the Dexter mod version 1.2 on my elocity, and I got brave and decided to update to v1.41. After installing I am stuck at a screen that says "Booting recovery kernel image". I have been trying to find a solution to this, but I feel a bit in over my head, as I am quite new to this. Can anyone help or point me in the right direction of a fix if there is one? I'm not exactly a tech genius but I can follow step-by-step instructions Anyone?

Make sure the file size of your .zip is 104mb
Could have been a bad download.
Re-download, make sure to check file size.
Start from scratch. Making sure to do the wipe/factory reset and clear cache.
Hope it helps. Bricks are so much less entertaining than tablets.

My .zip is showing as 110mb even after downloading again
Since I am stuck at the "booting recovery kernel image" screen I haven't been able to get back to the recovery menu...is there a way to force?

TexasGrrl said:
My .zip is showing as 110mb even after downloading again
Since I am stuck at the "booting recovery kernel image" screen I haven't been able to get back to the recovery menu...is there a way to force?
Click to expand...
Click to collapse
If you hold the power button in for about 15 seconds it will turn off and you can restart the process.
Hope this helps you.

After it powers back up it keeps taking me to the same screen instead of the recovery menu...

After it has turned off. Removed the SDcard...Hold the button in for 2 seconds and release...Then hold the button in again till the message about holding it in for 5 seconds appears...Keep holding the botton in...DO NOT RELAESE IT till the config screen comes up...Navigate to factory reset...choose the YES option.
That should then reset back to factory settings. I would also redownload the Dexter Mod again, just to make sure it wasn't corrupt.
That should clear it up for you.

rifdroid said:
After it has turned off. Removed the SDcard...Hold the button in for 2 seconds and release...Then hold the button in again till the message about holding it in for 5 seconds appears...Keep holding the botton in...DO NOT RELAESE IT till the config screen comes up...Navigate to factory reset...choose the YES option.
That should then reset back to factory settings. I would also redownload the Dexter Mod again, just to make sure it wasn't corrupt.
That should clear it up for you.
Click to expand...
Click to collapse
For some reason it won't take me to the 5 seconds message (it used to before all this no prob)...it just has the same "booting" message when it initially comes up and if I continue to hold down the power button, it will power back off instead of the config screen

Follow the instructions but hold the power and press the home button at the same time i tend to get recovery that way
Sent from my A7-040 using Tapatalk

nthknd said:
Follow the instructions but hold the power and press the home button at the same time i tend to get recovery that way
Sent from my A7-040 using Tapatalk
Click to expand...
Click to collapse
I tried, but still nothing....
As much as I love this thing, it's about to become a frisbee here in a few more minutes...

TexasGrrl said:
I tried, but still nothing....
As much as I love this thing, it's about to become a frisbee here in a few more minutes...
Click to expand...
Click to collapse
Ok. If you got broken recovery and broken system too - you should use hard methods to restore.
1) read this
http://forum.xda-developers.com/showpost.php?p=11742434&postcount=2
http://forum.xda-developers.com/showpost.php?p=11758575&postcount=14
2) Do all preparations things - install Nvidia Developer Kit, drivers, buy or find A-A cable
3) If you need any help with this - write here or use PM.

[Q] I can't pass through "ClockMod Recovery". I am stuck, PLEASE HELP, I NEED YOU

[Q] I can't pass through "ClockMod Recovery". I am stuck, PLEASE HELP, I NEED YOU
HELLO ALL,
I USED THIS LINK http://forum.xda-developers.com/showthread.php?t=858996
TO ROOT MY MY TOUCH 4G PHONE AND IT WORKED FINE UNTIL I ATTEMPT TO INSTALL OVERCLOCKING SOFTWARE FROM>>>
http://theunlockr.com/2010/12/14/ho...ted-s-off-t-mobile-mytouch-4g-or-t-mobile-g2/
AND AFTER DOING WHAT THEU SAID MY PHONE JUST ACTED CRAZY/
EVERYTIME I TRIED TO TURN THE PHONE ON IT VIBRATES CONTINUESLY AND NEVER GETS TO THE OS. SO I LEFT IT ON FOR NIGHT LIKE THAT AND I WOKE UP IN THE MORNING OBVIOUSLY BETTERY WAS COMPLETLY DRAINED ( AFTER ALL THE VIBRATING BACK AND FORTH)
ANYWAYS, NOW IT JUST TURNS ON AND STAYS AT " MY TOUCH 4G SCREEN WHERE ITS WHITE AND THAT WRITING" IT JUST FREEZES.
IF I TRY TO HOLD VOL DOWN AND CLICK POWER BUTTON, I GET TO THE PAGE WHERE ITS WHITE AND FASTBOOT, RECOVERY, FACTORY RESET,SIMLUCK,IMAGE CRC MENU.
I HAVE TRIED EVERYTHING IN THAT MENU INLUDING FACTORY RESET, NOTTING WORKS.
WHEN I ALSO TRY RECOVERY FROM THERE I CAN GET TO "ClockMod Recovery" BUT I CANT EVEN ACCES INSTALL ZIP FROM SDCARD, WHEN I TRY THAT ALL I SEE IS A BLACK SCREEN AND A HAT AND A BIG EYE UNDER IT.
THIS IS SO FRUSTRATING,

Step one, slow down
step two, turn off the caps.
Step three it's obvious that you have s=off if you have clockwork ROM on your phone.
At the top of your phone What recovery image do you have? 3.0.0.5? or a 2.x one?

thank you for responding, I have v3.0.0.5 version
i have v3.0.0.5 version

ilkercatal said:
i have v3.0.0.5 version
Click to expand...
Click to collapse
as long as you do not have any errors on your recovery image about not being able to mount anything....to get your phone working you can do one of two things.
1)You can flash any Gingerbread based ROM either from Cyanogen(mod) or from TeamRoyal. Those all can be found in our Development section from your recovery image.
2) you can flash the PD15IMG and restore you phone back to 100% via the HBoot (engineering) screen, that can be found in our development section as well.

no luck
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?

ilkercatal said:
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
Click to expand...
Click to collapse
Are you usin power botton or track pad to select the options?
Sent from my HTC Glacier using XDA App

You can also check the semi brick thread in here. There is a link to a nice guide to revert back to stock. Exact same issue!
Sent from my HTC Glacier using XDA App

ilkercatal said:
I get notting but a black screen with hat and eye under, everytime i try to choose anything from clockworkmod menu.I have adb installed on my pc and it regonizes my device , is there a way to reset the phone from there? maybe?
Click to expand...
Click to collapse
when you select something you need to select it with the track pad. If you use the power button you'll get the text will disappear.
the only way you can use ADB to flash stuff is if you have the engineering bootloader. If you just followed TheUnlockr's method then you do not have it.

i use volume buttons and power button to select it

oh ok now i used the mouse button select and i can select but now the phone is keep resrarting every like 10 seconds with a vibrate, nottting happens just restarting over and over. Where should I go next?
( remember fartest i can go is the "colockworkmod")

ilkercatal said:
i use volume buttons and power button to select it
Click to expand...
Click to collapse
As he mentioned above, you need to use the trackpad buttons to make selections, NOT the power button.
If you can successfully reboot into recovery, just wipe the phone completely and flash a new ROM...

ilkercatal said:
oh ok now i used the mouse button select and i can select but now the phone is keep resrarting every like 10 seconds with a vibrate, nottting happens just restarting over and over. Where should I go next?
( remember fartest i can go is the "colockworkmod")
Click to expand...
Click to collapse
If you navigate to "advanced" and select it will it give you a new set of options?
if it does try the "mount USB" and plug it into a computer and see if you can surf the SD card via a computer.

KenpoAP said:
Are you usin power botton or track pad to select the options?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?

TeeJay3800 said:
As he mentioned above, you need to use the trackpad buttons to make selections, NOT the power button.
If you can successfully reboot into recovery, just wipe the phone completely and flash a new ROM...
Click to expand...
Click to collapse
thank you for help but where do you get a new rom and how do you flash it?

ilkercatal said:
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
Click to expand...
Click to collapse
3.0.0.5 is only compatible with 2.3 ROMS.
use this to flash it
http://wiki.cyanogenmod.com/index.p...pdate_Guide#First_Method_.28via_RomManager.29
and you'll want to use the "from recovery" method.

ilkercatal said:
i restored from the back up I created before rooting, It took like 2 minutes and I reboot now I have the screen where its says my touch 4g and just stays there. I think my back up file is no good mabe?>, I alsoe noticed when holding vol down and power but the menu comes after it it says on top" glacier pvt ship s-off" does it mean anything?
Click to expand...
Click to collapse
Your ok! Maybe your bu is2.2 Try any of the 2.3 roms out there and post back!
Sent from my HTC Glacier using XDA App

Isn't there are flashable 3.0.0.6?
Sent from my HTC Glacier using XDA Premium App

I have 3.0 05
But As I was instructed I have downloaded PD151MG file and put it on my sd card and reboot my phone to the engineering menu and right away it asked me if I want to update to PD151Mg file and I clicked yes I guess this new rom will work for me
As of now it is updating.... I will let you guys know later for the result ( I hope I am not doing something even worst )

Mathato said:
Isn't there are flashable 3.0.0.6?
Sent from my HTC Glacier using XDA Premium App
Click to expand...
Click to collapse
There is a flashable 3.0.0.6 image that True_blue Scripted but you have to get into the ROM to do it.
ilkercatal said:
I have 3.0 05
But As I was instructed I have downloaded PD151MG file and put it on my sd card and reboot my phone to the engineering menu and right away it asked me if I want to update to PD151Mg file and I clicked yes I guess this new rom will work for me
As of now it is updating.... I will let you guys know later for the result ( I hope I am not doing something even worst )
Click to expand...
Click to collapse
Once you are done with the PD15IMG you will have to reroot your phone. IT will return it to a 100% stock fashion.
after you re-root the phone please flash the 3.0.0.6 to help save any confusion down the road.

neidlinger said:
There is a flashable 3.0.0.6 image that True_blue Scripted but you have to get into the ROM to do it.
Click to expand...
Click to collapse
The original 3.0.0.6 was made by option94, and you can flash it from your existing recovery or fastboot, so booting into a ROM is not necessary.