Can I somehow add application to some list of multitouch enable apps ? I for example saw iGO8 and zoom by multitouch on some video but on my HD2 its not possible ? any idea ?
Hi,
Yes it is
add
[HKEY_LOCAL_MACHINE\\Software\HTC\TouchGL\VirtualDe sktop\WhiteList\IGO8]
"ProcName"="iGO8.exe"
Is there someone who can build a program with which you can add programs to the Registry.
It specifies the name of the exe and the program automatically creates the key in the registry
Sorry for my English ^ ^ I'm German
Jetiman said:
Hi,
Is there someone who can build a program with which you can add programs to the Registry.
Click to expand...
Click to collapse
Wasn't there a very similar app written to add programs to a whitelist for the G-Sensor on the Diamond, Touch Pro, etc? Perhaps the creator of that app can alter it slightly?
I would search and PM him/her, but I've wasted enough of my working day already...
Jetiman said:
Hi,
Yes it is
add
[HKEY_LOCAL_MACHINE\\Software\HTC\TouchGL\VirtualDe sktop\WhiteList\IGO8]
"ProcName"="iGO8.exe"
Is there someone who can build a program with which you can add programs to the Registry.
It specifies the name of the exe and the program automatically creates the key in the registry
Sorry for my English ^ ^ I'm German
Click to expand...
Click to collapse
Hi Jetiman
Yes this is what mobilitygeek from PocketPC.ch found out (ok, with your help *ggg*)
Hi Jetiman, my forum mod Cendaryn pointed me to go here.
Yes you're right - this is working. The above key adds zoom functionality to the iGO8 app (the one with the mini-overview at the botton).
If there is a developer interested in making a useful app for that - feel free to contect me here by PM
(so I have to be active here too )
Can't promise how quick but I'll knock something together to do this......
Watch this space, my HD2 arrives tomorrow !
sub69 said:
Wasn't there a very similar app written to add programs to a whitelist for the G-Sensor on the Diamond, Touch Pro, etc? Perhaps the creator of that app can alter it slightly?
I would search and PM him/her, but I've wasted enough of my working day already...
Click to expand...
Click to collapse
Try Makeveral, he created G-config but don´t know if he is going to get an HD2. Now he is developing BsB WM6.5.1 ROM for Diamond.
Quick update - almost done - just needs a bit of tidying up will hopefully post cab tonight
hAndyZoom - Enable Pinch & Zoom
Here it is - hAndyZoom
Pretty simple - install the cab and run the program.
Select the program you would like to add to the 'Whitelist' for pinch and zoom then click enable and you should be good to go.
Hopefully, it works based on the earlier posts but can't test it as my HD2 doesn't come untill tomorrow.
Any issues let me know.
dahoarty said:
Here it is - hAndyZoom
Pretty simple - install the cab and run the program.
Select the program you would like to add to the 'Whitelist' for pinch and zoom then click enable and you should be good to go.
Hopefully, it works based on the earlier posts but can't test it as my HD2 doesn't come untill tomorrow.
Any issues let me know.
Click to expand...
Click to collapse
looks like a handy program!
unfortunately it doesn't work for me on my HD2. install is fine, but when i run it it gives an error: 'an error occurred on sub _main_findallfiles'
then i can choose to continue or not, and then i get an empty list, so i can't choose any program. I'm willing to test any other versions for you if you like. Should be an interesting program... thnx already
dahoarty said:
Here it is - hAndyZoom
Pretty simple - install the cab and run the program.
Select the program you would like to add to the 'Whitelist' for pinch and zoom then click enable and you should be good to go.
Hopefully, it works based on the earlier posts but can't test it as my HD2 doesn't come untill tomorrow.
Any issues let me know.
Click to expand...
Click to collapse
Confirmed not working! Please wait with the development until you got your HD2
Sorry everyone - tried it on my TouchPro 2 and the list of files appear and it writes the registry values - HD2 coming today - I'll have a play and update as soon as I can.
Related
Maybe someone could find this interesting...
While I find cumbersome to find out the (for instance) IP addresses assigned to the device, or frustrating when Internet Explorer cannot find any web page because the current connection is the WRONG one...
... I ended up writing my own Today Screen plugin to display more information on the active connection. Yeah, I know this is not quite a "common" requirement, but maybe someone finds it useful... or even can suggest further improvements - that will be of course welcome!
I've attached some screenshots of it running on both a WM5 emulator and my real Hermes running WM6 - thanks Schap!
Please, feel free to use it, redistribute it, add to a ROM kitchen, or cook it into any ROM...
Updated August, 13th...
More changes with the 1.3 version. Now localization has been added. I'm currently shipping this version with English (native) and Spanish languages. I've also added a ZIP file with a little document where you can find instructions to localize/translate ConnState to your preferred language and a template localization file for English.
Hasta la vista!!!!
Version History:
V1.0
First version released.
V1.1
VGA screen support added (enough to make it usable)
V1.2
Completed VGA screen support.
Added expand/collapse button - per popular request
V1.3
Localization support. ConnState currently ships in English and Spanish languages.
Thanks!!! Good work.
Thanks, PPCNUT... now let's see if someone likes it!!
dpduser said:
Maybe someone could find this interesting...
While I find cumbersome to find out the (for instance) IP addresses assigned to the device, or frustrating when Internet Explorer cannot find any web page because the current connection is the WRONG one...
... I ended up writing my own Today Screen plugin to display more information on the active connection. Yeah, I know this is not quite a "common" requirement, but maybe someone finds it useful... or even can suggest further improvements - that will be of course welcome!
I've attached some screenshots of it running on both a WM5 emulator and my real Hermes running WM6 - thanks Schap!
Please, feel free to use it, redistribute it, add to a ROM kitchen, or cook it into any ROM...
Hasta la vista!!!!
Click to expand...
Click to collapse
Thanks, man... Great work.
One sugestion, you can make the plug-in shorter, or with + icon to show all the info, to save today space
Regards.
jcespi2005 said:
One sugestion, you can make the plug-in shorter, or with + icon to show all the info, to save today space
Click to expand...
Click to collapse
Of course... in fact, why didn't I think about that in first place? :$ I was thinking about leaving the plugin "collapsed" (the size of "no connection") and add a right-hand minibutton that expands the thing up to its size... And even allow tapping you on it to open another window with full details on the connection...
This weekend will be fun
Thanks alot for your comments!!!
This is actually very nice work and I would use it, once you were able to condense it into a smaller amount of space.
Dont work in VGA screen (
(tested on Universal WM6)
Hope you fix it soon.
Nice. I would definitely use this if it was 'shorter'
Totally not for noobs but if you are are a road warrior, or on the road a lot sniffing WiFi hotspots then this is really a great add on!
thanks a lot.
dpduser said:
Of course... in fact, why didn't I think about that in first place? :$ I was thinking about leaving the plugin "collapsed" (the size of "no connection") and add a right-hand minibutton that expands the thing up to its size... And even allow tapping you on it to open another window with full details on the connection...
This weekend will be fun
Thanks alot for your comments!!!
Click to expand...
Click to collapse
Thanks to you for make this piece of software
Regards.
New Version! - VGA screen support!!
Mountain King said:
Dont work in VGA screen (
(tested on Universal WM6)
Hope you fix it soon.
Click to expand...
Click to collapse
Sorry, man... As I wrote it for myself, I tend to "hardcode" certain things Now, version 1.1 supports VGA screens.
Check first post for updates - and thanks!
New version 1.2
jcespi2005 said:
One sugestion, you can make the plug-in shorter, or with + icon to show all the info, to save today space
Click to expand...
Click to collapse
maevro said:
This is actually very nice work and I would use it, once you were able to condense it into a smaller amount of space.
Click to expand...
Click to collapse
blitzwurst said:
Nice. I would definitely use this if it was 'shorter'
Click to expand...
Click to collapse
To all of you that took the time to try this little toy, I have just released version 1.2. Take a look at the first post with the new CAB and screenshots.
Thanks all for your comments and suggestions!
Cheers!
improvement suggestion
would it be possible to display the proxy info? this would be very useful for the Cingular users (pie does not work via cell connection without proxy and wifi does not work with proxy). thanks
dpduser said:
To all of you that took the time to try this little toy, I have just released version 1.2. Take a lot at the first post with the new CAB and screenshots.
Thanks all for your comments and suggestions!
Cheers!
Click to expand...
Click to collapse
Nice, man.... i'll give a try later... Congratulations
Nice one, @dpduser - that's staying on my Today screen!!!
As it's a today screen plugin, can you make the Options button in the today screen configuration give us access to the things we wanna see displayed in the plugin?? I'm thinking of having the MAC addresss displayed, but wouldn't necessarily want it all the time - same goes for the connection being used; if I'm at home, then I'm usually using Wi-Fi.....you catch my drift??
Sorry if I'm talking out of turn, just my $0.02 You can probably tell, I'm not a programmer, just a netadmin with a deathwish
Mark.
VGA rocks!!!
It would be nice to have localization support in 1.3 release.
Please confirm it
Regards,
Mountain King
Feedback & ongoing work
First, thanks to all of you that took the time to play with ConnState!!
For the "improvements" part, and as I have read from your feedback:
- Regarding an "Options" dialog to configure somewhat more "advanced" features, yes, I'm working on it - It just takes a little longer than expected because now I'm trying to do a more compatible component, that must support QVGA & VGA screens and has to do so both in portrait and landscape orientations (if you do it, do it right, isn't it? ) BTW... anyone out there with a SQUARE screen device?
- MAC addresses? Yeah, I guess it's feasible... I'll try to add both MAC & PAN addresses. Not obvious, somewhat tricky but absolutely feasible!
- Show proxy information: regarding this, I was amazed at how tricky it is to discover the current proxy configuration for a connection! In first place I have to deal with WM's Provisioning and do that in XML (so an XML parser has to be placed in!)
- Localization!! Of course YES!!! Now I have two options to do it: one could be to maintain a single .DLL with embedded resources in a variety of languages or I could build a number of different DLLs each one built for a language... Hmmmm... Currently deciding on it!! I can do both Spanish and English versions... What languages are required? Would you, nice people, help me localizing this?
dpduser said:
First, thanks to all of you that took the time to play with ConnState!!
For the "improvements" part, and as I have read from your feedback:
- Regarding an "Options" dialog to configure somewhat more "advanced" features, yes, I'm working on it - It just takes a little longer than expected because now I'm trying to do a more compatible component, that must support QVGA & VGA screens and has to do so both in portrait and landscape orientations (if you do it, do it right, isn't it? ) BTW... anyone out there with a SQUARE screen device?
Click to expand...
Click to collapse
+1
dpduser said:
- MAC addresses? Yeah, I guess it's feasible... I'll try to add both MAC & PAN addresses. Not obvious, somewhat tricky but absolutely feasible!
Click to expand...
Click to collapse
+1
dpduser said:
- Show proxy information: regarding this, I was amazed at how tricky it is to discover the current proxy configuration for a connection! In first place I have to deal with WM's Provisioning and do that in XML (so an XML parser has to be placed in!)
Click to expand...
Click to collapse
I have no idea for this feature.
dpduser said:
- Localization!! Of course YES!!! Now I have two options to do it: one could be to maintain a single .DLL with embedded resources in a variety of languages or I could build a number of different DLLs each one built for a language... Hmmmm... Currently deciding on it!! I can do both Spanish and English versions... What languages are required? Would you, nice people, help me localizing this?
Click to expand...
Click to collapse
I'm Vietnamese so that I like to see my mother language display on my PPC.
In addition, it'd be cool if I could translate the localization file by Notepad without creating a DLL file (just like Spb does).
http://www.spbclub.com/forum/viewforum.php?f=10&sid=9f9d1e650a54130db66bea3db2dd9ad0
If you need translator (in Vietnamese of course ), feel free to write me. I will help you with pleasure.
Keep up the Good work!
Thanks
Mountain King
Installed, working great on Hermes, except the today plug-in isn't activated by default after install. Maybe this is because of the variety of devices enabling the today-plugins, i don't know.
What does CorrentDTPTNetwork mean?
Please I need your help. I added plenty of icons on the front Program page and don't remember any more how and what I did.
Thanks for your reply.
what do you want to do ?
add more or remove them ?
and are you talking about the program menu which has a number of rows of small squares
Thanks for your prompt reply.
You know the bottom line when you scroll your finger you get several pages, such as, Home, Telephone directory ... then at the end Programs. On this last one I did add some extra icons (yes squared) to which I assigned my preferred programs. I know how to delete one or more but not how to add a new ones.
To add more Programsquares:
Registry:
HKLM - Software - HTC - Manila - ProgramLauncher
Currently there are 24 directorys. You can duplicate some an change their names to 24 - ....
In here you can even unlock some fields if your provider did so. Set IsReadOnly from 1 to 0.
I think there will be a perfomancelimit somewehre, so don´t add to much in one time.
That is OK, but I don't remember had done that to add my previous ones. I can recall that I had to pouch a command and that was all.
Anyway, you are right, I might reached the max. of 24 icons.
I think I'll follow your recommendation and avoid to add any more since that might slow down the process.
Many thanks again
Flanders said:
To add more Programsquares:
Registry:
HKLM - Software - HTC - Manila - ProgramLauncher
Currently there are 24 directorys. You can duplicate some an change their names to 24 - ....
In here you can even unlock some fields if your provider did so. Set IsReadOnly from 1 to 0.
I think there will be a perfomancelimit somewehre, so don´t add to much in one time.
Click to expand...
Click to collapse
I've added 6 additional fields as you explained from 24 to 29, so totally I have 30 fields now and they appear on the programs tab in TF3D.
When you click on one of them (the one I've added), it opens the program list so you can choose one but after you do so the field still blank, so to resume it's not really working despite adding the field.
hmmm... I´ve tested it on diamond an it worked fine. I´ll test it on HD... it will take a moment.
Flanders said:
hmmm... I´ve tested it on diamond an it worked fine. I´ll test it on HD... it will take a moment.
Click to expand...
Click to collapse
Thks, keep us updated
I´m sorry - it really doesn´t work that way. The link is included the right way, icon link to. But it does not show. there are really differences between TF3D for Diamond and for HD.
Flanders said:
I´m sorry - it really doesn´t work that way. The link is included the right way, icon link to. But it does not show. there are really differences between TF3D for Diamond and for HD.
Click to expand...
Click to collapse
There should be other registry tweaks to be done.
I'll do a research and will let you know if I find anything
is it possible to increase the number of programs slot?
Would it be possible to have more than one "programs" tab?
http://forum.xda-developers.com/showthread.php?t=453240
For me, if this was possible it would massively increase the functionality of my HD.
Look forward to your answers.
Regards
Mav.
jackthekayman said:
is it possible to increase the number of programs slot?
Click to expand...
Click to collapse
If you look at the previous post, u can see that it is possible but for some reasons we are not able to add programs inside these tabs, don't know why.
It works fine on the Diamond, but not the Touch HD
Mavrick said:
Would it be possible to have more than one "programs" tab?
http://forum.xda-developers.com/showthread.php?t=453240
For me, if this was possible it would massively increase the functionality of my HD.
Look forward to your answers.
Regards
Mav.
Click to expand...
Click to collapse
Hi Mavrick
This thread is for adding more slots in the same program tabs and not adding more programs tabs in TF3D. Anyway I don't know if you proposal can be done, some expert developers might need to look at it
sorry
This is not a program, but just registry settings to use the built-in biotouch.exe to call Manila Control in order to toggle between M2D and Today.
Notes:
must install Manila Control to \Windows\ before the attached .cab
the cube no longer works after installing this, but the corresponding processes (i.e. QuickDial.exe, MediaHubMini.exe and APLauncher.exe.exe) may still in your memory unless you replace the .exe by dummy programs or kill the processes.
must backup the original [HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch] before installing the attached cube, otherwise won't be able to restore the cube.
toggling M2D/Today using softkeys as shown in the demo video is NOT set by the attached .cab
Demo video:
http://hk.youtube.com/watch?v=3fGNWYI2fkA
download:
for Nike, Polaris and Vogue, pls refer to attachments of this post.
for Elf, pls see the one provided by dark.angel at post #13
Good idea, I'll try on HD when I'll have it, I hope monday.
Thank you
great idea. Although I've still yet to find a use for a second today screen. lol
is there going to be a version of this for the vogue? it seems neat but im not ballsy enough to install something not meant for my device quite yet.
lazyboy0172 said:
is there going to be a version of this for the vogue? it seems neat but im not ballsy enough to install something not meant for my device quite yet.
Click to expand...
Click to collapse
Vogue uses different registry settings. please try the newly added cap in post #1. pls be prepared for bug-fixing time because i can't test it on my own. for safe, pls do a backup, especially the [HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch] registry key, before installing.
good luck.
davideuck said:
Good idea, I'll try on HD when I'll have it, I hope monday.
Thank you
Click to expand...
Click to collapse
surely none of the 3 uploaded version would fit the vga devices.
if you want a try, i guess the Polaris version can be a good start. pls be prepare for the pull-up screen being in 1/4 size.
pls do let me know the testing result and see whether i can find a way to fix it. if it doesn't work at all, pls kindly let me know the following registry key values on your device:
[HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch]
"App1"
"Cube1"
"Path11"
thanks for your interest.
thx!! its very fine!
to pp18 with a simple question..
PP18!!
please let me know before i make some serious mistake with my HTC touch 3G jade..Is it working on it as well?Or your program is connected only to the above mentioned phones?I needed exactly the program tweeks u wrote.It should be fantastic,but I have this conserne..
Please let me know if I can tweek my 3G jade without fear..?!
by the way,thank you for the nice app you wrote..HELIOS
Great find,. thanks for sharing,,.
pp18 said:
This is not a program, but just registry settings to use the built-in biotouch.exe to call Manila Control in order to toggle between M2D and Today.
Notes:
must install Manila Control to \Windows\ before the attached .cab
the cube no longer works after installing this, but the corresponding processes (i.e. QuickDial.exe, MediaHubMini.exe and APLauncher.exe.exe) may still in your memory unless you replace the .exe by dummy programs or kill the processes.
must backup the original [HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch] before installing the attached cube, otherwise won't be able to restore the cube.
toggling M2D/Today using softkeys as shown in the demo video is NOT set by the attached .cab
Demo video:
http://hk.youtube.com/watch?v=3fGNWYI2fkA
Click to expand...
Click to collapse
Is it possible to use this on HTC Touch (Elf)?
And also I would like to change running program from ManilaControl to any other, for example CommManager.
I've installed reg settings from the Vogue cab (is it right?), and copied original Biotouch.exe and dummy APLauncher.exe, MediaHubMini.exe and QuickDial.exe to the windows dir, created shortcut for biotouch.exe in the windows/startup folder and Soft-reseted my device.
Now when I make touch gesture the screen appears into black and nothing happens.
Is it possible using registry settings to bind touch gesture to run any exe (for example, commmanager.exe)?
Thank you for answers!
heliosismagic said:
PP18!!
please let me know before i make some serious mistake with my HTC touch 3G jade..Is it working on it as well?Or your program is connected only to the above mentioned phones?I needed exactly the program tweeks u wrote.It should be fantastic,but I have this conserne..
Please let me know if I can tweek my 3G jade without fear..?!
by the way,thank you for the nice app you wrote..HELIOS
Click to expand...
Click to collapse
sorry i really can't answer your question because i haven't played around with a Jade before and I don't have any friends who have bought one. the main prob is, i don't know the version no. of biotouch shipped with Jade.
if you really want a try,
do a full backup (so that you can hard reset + restore in worst case)
backup/export the [HKEY_LOCAL_MACHINE\Software\HTC\Biotouch] registry subtree
try the Polaris version
good luck
dark.angel said:
Is it possible to use this on HTC Touch (Elf)?
And also I would like to change running program from ManilaControl to any other, for example CommManager.
I've installed reg settings from the Vogue cab (is it right?), and copied original Biotouch.exe and dummy APLauncher.exe, MediaHubMini.exe and QuickDial.exe to the windows dir, created shortcut for biotouch.exe in the windows/startup folder and Soft-reseted my device.
Click to expand...
Click to collapse
Elf's built-in biotouch version is different from Vogue's. pls find the Vogue's version, which should appear in those threads about installing 4-sided cube on Elf
Now when I make touch gesture the screen appears into black and nothing happens.
Is it possible using registry settings to bind touch gesture to run any exe (for example, commmanager.exe)?
Thank you for answers!
Click to expand...
Click to collapse
basically yes. the trick is in the "App1" reg key. if the app being called has a visible window and you want to use the swipe-down gesture to hide it (like the original cube), the first part of the key value must be the right class name. otherwise, like the case for Manila Control, simply use a non-exist class name.
I've duplicated my commanager.exe and mui files and renamed them to biotouch.exe and biotouch.exe.mui, so now after the touch gesture commanager is running. It works!
Here is the test cab file, i haven't tested it on a clean device, but it seems to be work. If it doesn't working, post here please.
added a link to the Elf's version by dark.angel to post #1
snoopy
Hey, Love the snoopy. Is there anyway to take it off however? I't just doesnt go well with my today screen?
KH2GR said:
Hey, Love the snoopy. Is there anyway to take it off however? I't just doesnt go well with my today screen?
Click to expand...
Click to collapse
though not totally take if off, but editing the registry keys as below can minimize its appearance:
[HKEY_LOCAL_MACHINE\Software\HTC\Biotouch\Biotouch]
"TotalBMP"=dword:00000001
"Cube1"=hex:07,01,01,01,01,01,01,01,0A,C8,C9,CA,CB ,01,01,01,01,01,01
"UpFPS"=dword:0000FFFF
if you want to further cut down the size of the snoopy image that may appear for a short time, you can also change the below key:
(for Nike and Polaris) "Path1"="mc01.brn"
(for Vogue) "Path1"="\Windows\mc01.brn"
Is it possible to call manilla from any program with this gesture fix?
I mean the way I call and close cube by just scrolling tumb up or down.
i create this for my daily use, cause i want to check the note quickly
this can't save or read the .pwi file
you need install mortscript first!
v0.12
update for all resolution
whoa, fantasic job!
Please! a VGA version
Awesome work, was wanting this and QVGA even better
Nice App!! Can you make it in WVGA??
chriscsh said:
i create this for my daily use, cause i want to check the note quickly
this can't save or read the .pwi file
you need install mortscript first!
Click to expand...
Click to collapse
Convenience app, nice app...
Great Job~
Does this allow you to scroll thru a list of your saved notes? Or is it only the screens I see in the first post. Thanks.
propagandax said:
Does this allow you to scroll thru a list of your saved notes? Or is it only the screens I see in the first post. Thanks.
Click to expand...
Click to collapse
only when you click the note, Big Message showup
v0.12 update
just update for all resolution, pls test & feedback
another must have plugin! thnks!
error no opening
I installed mortscript v4.2, but when i click on Titanium plugin, it does not show anything
Could you tell me what version mortscript is required? or could you share with me the commands text?
P.S. I tried an old version of Mortscript, it says endnote is an unknown command
hyjwonder said:
I installed mortscript v4.2, but when i click on Titanium plugin, it does not show anything
Could you tell me what version mortscript is required? or could you share with me the commands text?
P.S. I tried an old version of Mortscript, it says endnote is an unknown command
Click to expand...
Click to collapse
i use the v4.3b5
hope this can help
Works great for me on VGA Touch Pro! Excellent work!
What format are notes saved in?
This looks interesting, but I'm confused about something. What format are the notes saved in? You say it doesn't save or read .pwi, which is the default notes application for WM, but what about .txt? Or is this just internal to your application?
Robert
i'm trying to do by myself but it's hard for noob..
how to have an ITA version?
ihave done !!! wow working for ita
but..only one things:the saved notes haven't the right title write in..
i don't think it's right, someone knows?
TommyRose said:
the saved notes haven't the right title write in..
i don't think it's right, someone knows?
Click to expand...
Click to collapse
Same problem here. I edited the mortscript files so that they would work on a german ROM but the notes' content (the texts written to the TEXT2 reg keys) isn't displayed in Titanium.
Fixing the CQuickNotes problem on WVGA
pyth27 said:
Same problem here. I edited the mortscript files so that they would work on a german ROM but the notes' content (the texts written to the TEXT2 reg keys) isn't displayed in Titanium.
Click to expand...
Click to collapse
I got the same problem - often I got empty pages in Notes plugin - the saved notes in TEXT2 reg key did not show up. (in portrait mode, in ladscape it seemed to be ok)
Problem solution: There is a bug in default.plg file for the CQuickNotes at least for 480x800 resolution. At line 251 there should be a </Text> tag, to close the text definition, but it somehow got under the next <Text></Text> block. This causes the TEXT2 not to show up, because it is not properly defined (it's in another Text block).
I fixed it by editing Titanium_480x800.cpr file in \Windows\ directory. Now it works flawlessly!
Hello,
I was wondering if there is a way to print or send to an excel file the list of calls made or received?
Another thing, is there a way to control the time of ONLY calls that you've made? If I go to the calls counting (in Portuguese "Contadores de Chamadas") I have the registry of ALL calls made and received. I can't control the time that I've spent where I've started the call (that can be very useful if you have minutes to spend), I only know the time spent on the phone.
Thanks in advance
I am also looking for a way
http://forum.xda-developers.com/showthread.php?t=676123
teriero said:
I am also looking for a way
http://forum.xda-developers.com/showthread.php?t=676123
Click to expand...
Click to collapse
The only help I know:
Phone.Dashboard.Minute.Tracker.v1.1.7.
bib*oops said:
The only help I know:
Phone.Dashboard.Minute.Tracker.v1.1.7.
Click to expand...
Click to collapse
And this app will work on WM6.5? I've made a google search and the last version found was 2.0.1 and I see that this application was made in 2007
This problem is really stupid... any 30,00€ nokia can track the time of received or made calls
Yes it does !
rvrosa said:
And this app will work on WM6.5? I've made a google search and the last version found was 2.0.1 and I see that this application was made in 2007
This problem is really stupid... any 30,00€ nokia can track the time of received or made calls
Click to expand...
Click to collapse
I'm using this program now for some years, and it works perfectly on almost all WM versions !
I started with WM2003 and now on my Mega with WM6.5 it still works perfectly !
My present version is 2.0.1.
Regards
cimber
The program works very well for the Mega.
But how to save the call log (Call log) on a PC?
Export
teriero said:
The program works very well for the Mega.
But how to save the call log (Call log) on a PC?
Click to expand...
Click to collapse
Just transfer the *.csv file via activesync or any filemanager to your PC.
Regards
cimber
Good program.Thank you and greet
Where can I get this program? Is there a link to download?
Thanks
rvrosa said:
Where can I get this program? Is there a link to download?
Thanks
Click to expand...
Click to collapse
http://www.pocketgear.com/de/usd/3685431,product-details,Phone-Dashboard-Minute-Tracker.html
It's strange... I've download it and installed it, but the program doesn’t appear anywhere!
I’ve searched on all programs but nothing…
And I’m sure it’s installed because it appears on the “uninstall programs” as HudsonMobile PhoneDashboard.
Any suggestions?
Did you the following ?
As far as I remember, it was necessary to make a softreset on this program after installation.
Otherwise it's depending on your user interface, what you need to do.
For sure you can find the program either in the directory "programs" or a localized name e.g.
in german "Programme"
and a link in the following directory "windows/autostart".
If its not there, you need to make a link to there.
Regards
cimber
It's strange... I've download it and installed it, but the program doesn’t appear anywhere!
Cause to view it you need to disable TouchFLO and turn on Phone Dashboard.(settings/today/Items)
Phone Dashboard is a plugin "naked" today screen.
Unless you use an alternative overlay interface f.ex.SPB MShell-then simply tap the "show today".
Alternative:ShellSwitcher http://forum.xda-developers.com/showthread.php?t=675903
teriero said:
It's strange... I've download it and installed it, but the program doesn’t appear anywhere!
Cause to view it you need to disable TouchFLO and turn on Phone Dashboard.(settings/today/Items)
Phone Dashboard is a plugin "naked" today screen.
Unless you use an alternative overlay interface f.ex.SPB MShell-then simply tap the "show today".
Alternative:ShellSwitcher http://forum.xda-developers.com/showthread.php?t=675903
Click to expand...
Click to collapse
Please elucidate me
First I install the Phone.Dashboard.Minute.Tracker, then when I need to use it I have to change from TouchFlo to Phone Dashboard?
But if I use the TouchFlo the program is working and registering all, right? To see it I only need to turn TouchFlo off, right? Or I can no longer use TouchFlo?
Don't exist another program to control the time used in calls that don't need all this? I think is something so simple compared to other things that WM can do...
Thanks
rvrosa;Don't exist another program to control the time used in calls that don't need all this? I think is something so simple compared to other things that WM can do...Thanks[/QUOTE said:
If you're mainly TouchFLO, I recommend Festinger Historia.
After registration, you can try freeware version 1.11.
http://www.festinger.net/
Click to expand...
Click to collapse
teriero said:
If you're mainly TouchFLO, I recommend Festinger Historia.
After registration, you can try freeware version 1.11.
http://www.festinger.net/
Click to expand...
Click to collapse
I don't like or dislike touchLFO... I don't know or ever used something else to know if it's better or worst. I had a Nokia 1100 and I've bought this phone with touchFLO... To me is OK since it works.
Do you think there exist better than touchFLO? Give me some links that I can look
About this festinger I'll give it a look to see.
Thanks
Ok, I've downloades festinger (v.3.1.2) and tried it.
Good but not so good...
The registration is month by month. If I charge my phone on day 10 or 15, or more than once each month I can't get the info I need.
It should let me choose the period to show.
Historia became Free!
Hi, I'm happy to announce that all versions of Historia are now freeware. feel free to download and install it.
Thank you for sharing
Thank you for sharing.Best regards Ronenfe.
rvrosa said:
This problem is really stupid... any 30,00€ nokia can track the time of received or made calls
Click to expand...
Click to collapse
Touch2 Has it's timer for calls too .... Start =>> Settings =>> System =>> Device Information =>> Call Duration ... Outgoing and Incomming ... i think this is what u're lookin for ?