Ever since I had this HTC Tattoo, I couldn't manage to calibrate the G-sensor and therefore the display doesn't turn when I rotate the phone.
I always get the message "Calibration aborted".
Do you guys have this problem? Did you find a solution for this?
Please help!
Reset phone
Already did it. Still not working.
Did you fix the problem yet, you could try a different rom or even reflashing the one on the phone already.
same problem here.....
I did try a different ROM, still nothing.
Then it could be a hardware issue. If I were you, I would've looked for a replacement.
have you tried holding the phone at a tilt and then calibrating?
lobotomy said:
have you tried holding the phone at a tilt and then calibrating?
Click to expand...
Click to collapse
Yep, I did try that. Still nothing. I think it's just a hardware problem.
I saw this in the Hero forum and I think it might help. There are 2 ways of checking a hardware fault with the G-sensor:
- either the Bubbles game which does not depend on the OS for sensor data
- or the Sensor Debug app.
If anyone of these apps gives you a good response from the sensor, then it is a software fault and you should harass HTC for a software patch. That's what the Hero guys did and it seems to have worked for them (in that case it seemed to be some kind of permission problem with the calibration log file).
Hello!,
After trying a numerous NAND roms for my HD2, on every of them the accelerometer is not working. But flashing back to winmo everything is OK and accelerometer works.
Problems having : No screen rotation, no games work which need accelerometer, no bubble meters and so on.
I saw lots of threads here, but none of them were answered. Also some fixes out there from january, but its is said that new kernels include that fix.. Being really desperate about the accelerometer to start working tryed everything , all those fixes - none of them worked.
I really would appreciate if somebody would say a 100% answer if they had same problem and is it for EVERYONE that you are chilling around without accelerometer with NAND roms?
Or, a nicely explained , or some new fixes around there, to fix that..?
I have European HD2, Bought in Estonia. 2.15 radio, and RAFDroid build atm 4.02
Before teyed all cyagenmod build from MDJ, imilka builds, Coredroid, etc.
Waiting for a adequate anwer!, and Thank you in advance!
Daniil.
No pb for me with each Nand i tested. (prj Clean Desire, typhoon, Hyperdroid)
i had this to on my sd build i used to have but when i went to NAND everything was fixed
maybe you can try to recalibrate it in android?
Auralol said:
Hello!,
After trying a numerous NAND roms for my HD2, on every of them the accelerometer is not working. But flashing back to winmo everything is OK and accelerometer works.
Problems having : No screen rotation, no games work which need accelerometer, no bubble meters and so on.
I saw lots of threads here, but none of them were answered. Also some fixes out there from january, but its is said that new kernels include that fix.. Being really desperate about the accelerometer to start working tryed everything , all those fixes - none of them worked.
I really would appreciate if somebody would say a 100% answer if they had same problem and is it for EVERYONE that you are chilling around without accelerometer with NAND roms?
Or, a nicely explained , or some new fixes around there, to fix that..?
I have European HD2, Bought in Estonia. 2.15 radio, and RAFDroid build atm 4.02
Before teyed all cyagenmod build from MDJ, imilka builds, Coredroid, etc.
Waiting for a adequate anwer!, and Thank you in advance!
Daniil.
Click to expand...
Click to collapse
Usually d G-Sensor/Accelerometer has been pre-calibrated while cooking d android build...I've never had such a problem on SD, NAND or RAM builds....Perform a Task 29 on ur device and try flashing the build contained in my signature....CMY's work has always been great...
Done task29, done recalibration in android, everything... same. There is numerous people having the same prob , as i have seen from questions subforum.
Auralol said:
Done task29, done recalibration in android, everything... same. There is numerous people having the same prob , as i have seen from questions subforum.
Click to expand...
Click to collapse
Hmmm...Since it works on WinMo, try recalibrating it there and then run an android sd build (i just tried "Desire_DL" series and all was ok....on d other hand, have u tried d NAND build in my sig?
I have tryed everything, including your builds in the signature.... Nothing helps
Help!
Try the post that is in my sig, there is alot of info in there that might be of use to you. What definitely controls the G-Sensor is the bma150_usr file. If nothing in my post helps you at all, then I am unable to help you further since I dont have a Eu HD2. But I still believe that there might have been a revision which might explain your troubles as well as some other people.
Tryed that also, no help at all.
Auralol said:
Tryed that also, no help at all.
Click to expand...
Click to collapse
Hmm, dats quite a dilemma....I tk it u can't return n request for another device seeing as u got it 4rom Estonia...or can u?
Android is not supposed to run on HD2 anyways, so why should i have an opportunity to return my device for another one?
Auralol said:
Android is not supposed to run on HD2 anyways, so why should i have an opportunity to return my device for another one?
Click to expand...
Click to collapse
True it wasn't but IT IS...I and several others are proof it works beautifully on the HD2, even better than some native android devices...I offered a suggestion n its ur call 2 tk it or leave it...I on d other hand, love my current android build on my HD2.
Have u tried this workaround?
P.S. Oh yeah, and my accelerometer/g-sensor works perfectly in apps n games.
I mean, yeah it is working, but... not working for my device. And the point was that i can't take it to my local shop for a return, as the g-sensor works for the WinMo, and they will say that its your fault that it isn't working in android. Yeah i know that accelerometer works on androids on the Tmobile HD2-s
And yeah, i have tryed
Different type of g-sensor
I understand that some newer builds of the HD2 have a different type of g-sensor. I have x4 HD2's. 3 are working perfectly with HyperDroid CM7 cheerful cheetah. The forth is used by my company co-director which I recently tried to move over to the HyperDroid CM7 cheerful cheetah from WM6.5. This is when I came across the problem. Very annoying. The fact is that this device went back to HTC to repair/replace a cracked screen (I dropped the device last June). I suspect they gave me a reconditioned or replacement unit with the "updated" sensor.
Please advise me if there are any new developments. I can confirm that the HD2 (with the working g-sensor) has incredible battery life and is only my no.2 device because of the 8mp camera on the DesireHD.
Regards,
Jay
[email protected] said:
I understand that some newer builds of the HD2 have a different type of g-sensor. I have x4 HD2's. 3 are working perfectly with HyperDroid CM7 cheerful cheetah. The forth is used by my company co-director which I recently tried to move over to the HyperDroid CM7 cheerful cheetah from WM6.5. This is when I came across the problem. Very annoying. The fact is that this device went back to HTC to repair/replace a cracked screen (I dropped the device last June). I suspect they gave me a reconditioned or replacement unit with the "updated" sensor.
Please advise me if there are any new developments. I can confirm that the HD2 (with the working g-sensor) has incredible battery life and is only my no.2 device because of the 8mp camera on the DesireHD.
Regards,
Jay
Click to expand...
Click to collapse
Hi Jay, I've got a similar problem.
Actually, I've got (or had) an EU model, and my screen cracked, so it has been out for repair. So both descriptions in this post (yours and Auralol's) fit my problem. I have been looking for a fix for a while now, did you find anything?
I would love it to work, it really is the only thing that doesn't. If this is fixed, my HD2 would be perfect and irreplaceable.
If you find anything that helps, keep me posted?
Kind regards,
Bas
Hey Bas,
I contacted vfuk & simply said that there was a problem with the g-sensor on my HD2... The helpful telephone attendant asked me to remove the battery, memory and sim cards and a replacement device would be with me the next day. The following day the courier took the troubled HD2 and handed me a new Desire HD albeit without the antenna and battery covers. I have a spare battery and ordered the covers from expansys.
I did explain to vfuk what happened - they said I wasn't to worry.
At the time of writing I now have x4 dhd's and a working HD2 with HyperDroid which I am going to give to a pal to lure him away from Nokia...
I now have no way of helping you further. Sorry bout that.
Best,
Jay
[email protected] said:
Hey Bas,
I contacted vfuk & simply said that there was a problem with the g-sensor on my HD2... The helpful telephone attendant asked me to remove the battery, memory and sim cards and a replacement device would be with me the next day. The following day the courier took the troubled HD2 and handed me a new Desire HD albeit without the antenna and battery covers. I have a spare battery and ordered the covers from expansys.
I did explain to vfuk what happened - they said I wasn't to worry.
At the time of writing I now have x4 dhd's and a working HD2 with HyperDroid which I am going to give to a pal to lure him away from Nokia...
I now have no way of helping you further. Sorry bout that.
Best,
Jay
Click to expand...
Click to collapse
Heyy Jay,
Thanks for the reply. So, you kind of worked around the issue Sounds like great customer service. Too bad my provider does not work like that.
Just being curious if you had the same problem as I am facing now, did you try to retrieve / read data from the sensor (i.e. with "sensor debug")? I tried yesterday, didn't get any data at all. Probably means Android doesn't see the sensor, or it is indeed a different sensor and therefore needs other drivers.
I just downloaded some e-books about android and java, just to see how it works with hardware. Maybe it is possible to implement my 'own' drivers in a ROM to make sure the sensor can be detected at least. I guess it is going to be my pet project to find a solution, and when I do, I'll probably try to get it posted on xda. But then again, my programming skills are minimal at this point (just some Basic, html and Step 7), so it might take me a while...
Anyway, thanks for the reply. Too bad your solution does not work for me (I would not mind that either).
Kind regards,
Bas
Bas2ct said:
Heyy Jay,
Thanks for the reply. So, you kind of worked around the issue Sounds like great customer service. Too bad my provider does not work like that.
Just being curious if you had the same problem as I am facing now, did you try to retrieve / read data from the sensor (i.e. with "sensor debug")? I tried yesterday, didn't get any data at all. Probably means Android doesn't see the sensor, or it is indeed a different sensor and therefore needs other drivers.
I just downloaded some e-books about android and java, just to see how it works with hardware. Maybe it is possible to implement my 'own' drivers in a ROM to make sure the sensor can be detected at least. I guess it is going to be my pet project to find a solution, and when I do, I'll probably try to get it posted on xda. But then again, my programming skills are minimal at this point (just some Basic, html and Step 7), so it might take me a while...
Anyway, thanks for the reply. Too bad your solution does not work for me (I would not mind that either).
Kind regards,
Bas
Click to expand...
Click to collapse
Hi,
I'm having the same issue as you and was wondering if you had made any progress or if there is anything I could help you with although my programming knowledge is probably more limited than yours. Anyway this issue seriously needs to be looked at! :'(
Still no fix?
Hello, I know it is old thread, but I see there are more people than only me having this issue. Same thing happens to me. Accelerometer isnt working on Android, but it works great on WinMo. I tried a lot of ROMs, "fixes", but nothing helped at all. I used apps like Sensor debug, and sensor list, seems that they dont see my g sensor at all, like someone said before. As I know, g sensor is connected with bma150_usr file, but I used my Root Explorer to search for that file and there is no such a file at all. Shouldnt it come to my device with other ROM files? Yes, I tried to put it where it should be, but the same s**t again... Is there anyone who solved this thing? Because I dont see any solutions mentioned in the whole xda forum.
Looking forward for answers which REALLY helps.
Hi,
I have this same problem, My g-sensor didin't work on AMeriCan Android.
I was reading a topic http://forum.xda-developers.com/showthread.php?t=902129, and my question for this: How I can delete files
Before installing the file above, go to System/Bin and delete the bma150_usr, then navigate to Data/Misc, and delete the following files:
AK8973Prms.txt
AK8973.Prms.txt.tmp (If there)
bma150_usr.txt (If there)
After navigate to the above file and add it to System/BIN and then your calibrating will function correctly and adjust the values properly.
Click to expand...
Click to collapse
Hi,
I install a few versions of android in my HD2
- NAND
- SD
- PortAndroid
The resoult is this same, g sensor does not work. In WP7 and WM 6.5 g sensor works great !
I think my phone is not comatibile with android, or I could be wrong. I tried many ways, when I try calibrate senor, the ball still stays in center (dont move).
Brothers and sisters, could you help me?
I love android, and I must have a comaitibility in 100%.
Who help me ?
which rom you tried ?
android and g-sensor works great.
imagin112 said:
Who help me ?
Click to expand...
Click to collapse
tyry pyramid rom 3.0 sense v7.0......................YOU'LL BE SORTED THEN
Have you tried calibrating the accelerometer? Then, if it didn't work, have you tried this?
I try a 10 meybe 13 roms. Spaniq, yeah i try that mthod but does not work. I cant calibrate g sensor, the ball till stays in center, i try a 16 times, and not resoult...
I try in stock = not work
AmeriCan adnroid = not work
ALl version mccm and boxmax= not work
Etc..
I try just everythink....
did you had any screen replacement? its a common problem in every hd2 having screen replacement. i am also a sufferer. it must be a kernel driver issue. winmo 6.5 might have some additional sensor driver that kernl chefs didnt though necessary. i dont know when we will overcome this problem.