So i have an HTC Snap on XT in NZ (MAPL130)
and its in hard spl 1.19 and i cant HARD SPL, because Jumpspl doesnt work properly and Windows wants to send the error message.
so i figured it must be because my device has big security on it,
i can install some applications. some others don't work.
Ive tried unlocking with SDA application unlocker = Fail
Ive tried editing the registry but its says access is denied and so ive tried three different security bypass methods and all end with FAIL.
any other ideas? i really want to upgrade to 6.5, but it seems the security is too tight!
Related
when installing wm 2005 im getting the error 103 rom image not found and thats it it wont install please help
Hi justin, I'm getting the same error too. I wonder if you found a fix yet or not? I seem to be stuck in the bootloader mode and nothing will take me out of it. I have bootloader vs 1.06.
What happened was I was upgrading to wm 2005 and kept getting the country code error 120 so I went thru the steps that I found here and I put 2 files on my qtek2020 HimaClearJumpCode and HimaGetDeviceData then by mistake I executed the wrong file and it took me to the bootloader mode and it will not come out now. I never intended to ever execute the file but I have a nervous tick and my stylus hit it and double tapped it and viola I'm stuck in the bootloader hell loop.
I'm not really a novice with my qtek2020 I have upgraded and downgraded and manipulated it in many many ways but this one has me stumped. I have searched these threads until I'm blue in the face. I only found on thread that even mentions my problem but it does not give any fixes.
So if anyone here can help me fix this I would appreciate it. I hope I don't have a paper weight
Hi all,
Hoping someone could help me. My Dopod has been freezing on start-up and after doing countless hard resets i am stuck at the Windows Mobile splash screen!
I have connected it to my PC, but as Windows Mobile hasn't loaded, ActiveSync can't pick-up my Dopod. This means i cannot update or completely re-flash. Is there a way to do this without ActiveSync?
I am now stuck with a Dopod i cannot use. I have no idea what to do.
can you flash using SD card? have a search, im pretty sure that will work.
Or go through the Bricked thread
Are you sure you're doing hard resets and not soft resets? Generally when a freeze occurs, you would soft-reset.
If you have indeed been doing hard-resets, then you most likely have a hardware issue and there's not much anyone here can do to help that.
Have you updated your ROM in the past? If these freezes started after an update, then it may be a bad update, so you could either try flashing from microSD as suggested above, or boot into the bootloader as per instructions in the wiki and flash from there.
Thanks for your replies guys!
I have tried all that. My son knocked my usb cable from my Dopod whilst it was updating my ROM ... that was the cause of my Dopod current 'brick' state!
My bootloader is SPL-1.09, but i have noticed from here that the Dopod ROM that i require (for Hutchinson '3' - Australia) uses bootloader SPL-1.06. Is it true that i cannot down-grade from 1.09 to 1.06?
I ask this question as i get "Invalid Vendor ID" attempting to flash my Dopod with that ROM. When i don't get that, i get communication errors (Update Error) when attempting to run Hard-SPL-V7.
What could i be doing wrong?
Hey guys,
Think i have worked out that my CID is corrupt, therefore i can't flash any ROM even if i wanted to. I used mtty and after a bit of searching in this thread (http://forum.xda-developers.com/archive/index.php/t-291336.html) i found that the 'info 2' result i got (HTCSF kEØ(HTCE) meant my CID was corrupt.
Hopefully i haven't voided my warranty as i haven't attempted to flash any 3rd party ROMS, only the one on the Dopod website that was accidently stopped when my son tripped over the usb cable.
We shall soon find out!
I've tried several roms, trying the XBMOD one now (which seems to have no clue as well) and for the life of me this thing is always locked.
When a rom states it has the unlock cooked in, what does that mean? I tried xbmod coming from android (task 29, magldr 1.13, flash, boot with volume up and down, down down twice.) and yet when I go to use the xap installer, I get the "make sure your phone is unlocked message". Since then, I've tried everything, even reinstalling windows on my other drive, then starting the whole process again, and same thing. Phone is still locked (even though this rom, and others I've tried state it comes unlocked). Is there some bug, or error, or did an update with zune maybe stop this? I've had no luck with any guides to unlocking, and tried several different registry edits, host edits, chevrons, certs, etc. And always get the dreaded uh oh message.
I guess I'm really asking, does cooked in unlock really mean it's unlocked? I mean, I've been flashing android forever and never had a problem like this. Most roms that state they are pre rooted, are in fact pre rooted, and don't require anything to work, yet any wp7 rom that states it's unlocked, isn't (at least for me) is it my system (remember, I've tried this with a clean win 7 install as well as my previous, all to no avail)?
Rooted and unlocked are two very different things, at least in the WP7 sense.
To be unlocked means you have access to install apps via sideloading
Rooted means you have unrestricted access to the file system
Most ROMs that are not original DFT ROMS are unlocked, these do not need to be re-unlocked, you do not need to use chevron, Zune needs to be installed and connected, the device must be connected to zune, you can try using the application deployment program but run it with admin rights
on the phone make sure the device ISNT pin locked, or on any other screen other than the tiles screen. you should be able to sync music to the phone if you cant then somthing else is wrong.
try all that an get back to us.
Hi guys.
You will all properly think here we go again with this noob question.
I have spent several nights figuring out how to jailbreak / dev unlock my omnia 7 without success.
It was an official t-mobile de version but i did the resistor trick to enter download mode and flashed the retail version i could find in one of the posts.
Now i am on version 7.0.7392 and i would like to unlock the device so i could registry edit my region so i can have a dutch phone when the mango update roles out. ( i also tried downgrading to nodo )
i have read much post but every time i get a error communicating message.
i have edited my host file, installed dev phone software installed certs, stopped running services on port 443, etc. etc.
but i couldn't connect to the phone with chevron.
Do i need to be on a special firmware version or something before this works?
is there someone out hear ho could help?
is there nobody how could help me?
hello,
i had the same issue as you a while back. if i remember correctly, chevron doesn't support nodo - i think it only supports 7008 or earlier. so, flash a pre-nodo rom, and remember to put your phone in aeroplane mode before you connect it to your pc to dev unlock it. also install samsungtools.xap and select prevent devie relock, as well as enable 3g toggle if you want - i find it very handy. reboot your phone after selecting prevent device relock in the samsung tools on your newly developer-unlocked phone.
Hi there thanks for the reply, i have already downgraded to version 7.0.7004
but still the same errors, cant communicate with phone. make sure you are running zune and the usb cable is connected.
do i need to run this from a windows xp machine?
i have done so many things now, installing dev tools. edit registry , airplane mode downgrading firmware, stop running process using port 443, tried 3 diferent machines already now. i cant figure it out.
Is there any solution for this problem .I am on 7008 and getting the same errors I need to install apps on this device
I managed to get get it work. but it is verry strange.
i do not know what it didt to make it work.
but you need to install windows developers tools ( start from a fresh install of zune and developers tools ) run chevron as administrator with the screen unlocked.
Also make sure you install the certificate on your phone.
Hi All,
I have an HTC HD2 and YukiXDA's ROM installed on it..
It the latest version 8107. Due to some reeason, Its not developer unlocked..
I tried it with Chevron, but it says "I have trouble communicating with Phone error", even after following various tutorials and tricks for Chevron.. I also tried installing the "Dev_Unlock.cab" via the Update Cab Sender.. Still no result..
I guess the tutorials are for the version 7720 of Mango & not for 807..
Can anyone help me out here with Unlocking the 8107 build of Mango..?
Thnx in advance..
if cab file not help only way is hard reset and send unlock cab after
or use any other full unlocked ROM