Related
Hi,
Yesterday, all of a sudden, my Tmobile Wing started vibrating and it wouldn't stop. I took a look at it and the front two lights displayed red and blue during this vibration episode. The only way I could stop it was by taking the battery out. After reinstalling it, I did a soft boot and it turned back on and worked perfectly fine for about eight more hours. Then, last night, it started vibrating again on it's own so I did the same exact thing as earlier in the day.
This time, it did not respond to a soft boot. It won't respond to a hard boot either. It won't take a charge (or at register it's taking a charge). Nothing!
The only thing that displays is a little BLUE light on the keyboard where it says, ALT. If I remove the battery, the light goes out. Once I insert the battery again, the blue Alt light goes back on. The phone is completely dead otherwise.
I have not done any hacks, updates, changes whatsoever. It didn't get wet and was not dropped.
Any possible ideas what the little blue light is supposed to mean? It's got to be some kind of service code or something? I'm pretty sure the battery still has a charge, but I haven't tried a new one. I even tried the plugging in the AC adapter and the phone still wouldn't respond at all. Is there any reason to think the computer would recognize it with the USB cable when it won't even power up?
Any solutions or where to turn with this thing? I think the little blue ALT light must signify some error code possibly......
Thanks.
it's the ALT key..
so you can input the blue characters on the keyboard.
you're phone is possessed.. sorry
can it go into bootloader mode(hold camera key and pole hole on side)?
if it can just flash a new rom into it or the original tmobile stock rom.
Have you hard-resetted your phone?
Which ROM are you using?
mv3, the answers to your questions.
Brudha said:
It won't respond to a hard boot either. I have not done any hacks, updates, changes whatsoever. It didn't get wet and was not dropped.
Click to expand...
Click to collapse
--------------------------------------------------------------------------------
Hey I Install The Cube And Enable It But How Do I Run It Like How To I Turn It On What Button Am I Suppose To Put
--------------------------------------------------------------------------------
Hey I Install The Cube And Enable It But How Do I Run It Like How To I Turn It On What Button Am I Suppose To Put
vietkiller said:
--------------------------------------------------------------------------------
Hey I Install The Cube And Enable It But How Do I Run It Like How To I Turn It On What Button Am I Suppose To Put
Click to expand...
Click to collapse
what cube did you install?
well install ftouchflo config by schaps and enable ftouchflo
i suggest you uninstall your cube and install slithers cube here.
then either get ftouchflo config or get the _ftouchflo_config.txt file from the windows folder and make the down-up gesture to be slithers cube.
kidnamedAlbert said:
mv3, the answers to your questions.
Click to expand...
Click to collapse
uhmm...no.
hard boot does not = hard-reset.
boot = to load your device.
there's no such thing as a hard boot or is there?
i assumed this person meant a power cycle..because if the device is not booting even after performing a hard reset command via hardware keys..blablablah..
saying you have a wing does not mention which of the stock ROMs is on the device.
so yeah... my questions werent answered.. :/
mv3 said:
uhmm...no.
hard boot does not = hard-reset.
boot = to load your device.
there's no such thing as a hard boot or is there?
i assumed this person meant a power cycle..because if the device is not booting even after performing a hard reset command via hardware keys..blablablah..
saying you have a wing does not mention which of the stock ROMs is on the device.
so yeah... my questions werent answered.. :/
Click to expand...
Click to collapse
I might be using the words 'reboot' and 'reset' interchangeably (incorrect or not). What I have attempted to do is a soft reset by depressing the little hole by the volume control. This is what worked the first time for me. The phone will NOT respond to that now.
In attempting a hard reset, I pressed the two buttons on the front marked with a '-' at the same time as depressing the same hole. Nothing responds to this at all. Is this the corrrect procedure for a factory reset?
I'm not sure the exact ROM installed. I have not changed it at all since the phone was purchased, so it's original. Since the phone doesn't even work now, doesn't seem like I can find out the ROM version.
Brudha said:
I might be using the words 'reboot' and 'reset' interchangeably (incorrect or not). What I have attempted to do is a soft reset by depressing the little hole by the volume control. This is what worked the first time for me. The phone will NOT respond to that now.
In attempting a hard reset, I pressed the two buttons on the front marked with a '-' at the same time as depressing the same hole. Nothing responds to this at all. Is this the corrrect procedure for a factory reset?
I'm not sure the exact ROM installed. I have not changed it at all since the phone was purchased, so it's original. Since the phone doesn't even work now, doesn't seem like I can find out the ROM version.
Click to expand...
Click to collapse
continue holding the 2 soft keys, don't release. a warning should appear.. if you press the 'Send' key... the send call/talk/etc button.. then it should initiate a dealer specified ("hard")reset.. if you press any other buttons, it will ignore the attempted hard reset.
if that doesn't happen.. then that's very uncool....
Well, after trying just about everything, I've pretty much accepted there's got to be some sort of 'short' to the motherboard. I think the ALT light constantly on signifies the phone thinks that key is indefinitely in a depressed state. Or something like that...........
same thing happened to my phone. does anyone know if there's a known fix for this?
Hi, after reading that the PM10A could take windows mobile 2006 i tried it, installed it and broke my PM10A. Now all the thing does is Vibrate, it wont charge or turn the screen on, all it does is vibrate for a short period of time and if i plug it in it will vibrate continously. Also it cannot be seen by the computer or active sync, everybody i have talked to about this says that it is a complete mystery, what i was hoping was to see if any body knows what is wrong and could help me??
I only bought this around 3-4 days ago and therefore quite upset, i know its my own fault due to WM2006 but is it fixable?
Please help me.
The Magician can't take WM6. wherever you read it, it was not true... It can't take WM5 either
I'm sorry to be harsh, but this is something that has been asked a lot of times, and the answer is still no. Closest you'll get as far as i know is the WM6 lookalike rom that someone here posted...
you bricked your phone, methinks... Buy a new one off ebay or something.
Welcome to the forums though
Enter boot loader hold down camera + power button and reset device.connect cable and update
"
The Bootloader
You can enter the bootloader by holding down the camera + power button, and resetting the device.
the reset button is on the bottom right, a small hole. a wallaby reset pin fits nicely in the hole. the magician unfortunately does not have one.(but you can use the magician pencil) "
Works again! Thanks!
grigoreee said:
Enter boot loader hold down camera + power button and reset device.connect cable and update
"
The Bootloader
You can enter the bootloader by holding down the camera + power button, and resetting the device.
the reset button is on the bottom right, a small hole. a wallaby reset pin fits nicely in the hole. the magician unfortunately does not have one.(but you can use the magician pencil) "
Click to expand...
Click to collapse
Great, this works perfectly and now the PDA works normaly again, thanks a lot for your great help, very much appreciated, thanks a lot,
Thanasie
WM5
grigoreee said:
Enter boot loader hold down camera + power button and reset device.connect cable and update
"
The Bootloader
You can enter the bootloader by holding down the camera + power button, and resetting the device.
the reset button is on the bottom right, a small hole. a wallaby reset pin fits nicely in the hole. the magician unfortunately does not have one.(but you can use the magician pencil) "
Click to expand...
Click to collapse
hello is there no chance to upgrade magician from WM2003SE to WM5 ???
No I don't think so.
aaurnab said:
hello is there no chance to upgrade magician from WM2003SE to WM5 ???
Click to expand...
Click to collapse
I don't think so but if you do find something please let me know, thank you.
My Magicain, seems to be permanently stuck in the bootloader mode. I've tried using the original flash RUU (even the NO_ID version) without success. It either doesn't detect my device, or says that it isn't the correct version for my phone (although I downloaded it from the official site).
Any suggestions?
Nokia 3650 said:
My Magicain, seems to be permanently stuck in the bootloader mode. I've tried using the original flash RUU (even the NO_ID version) without success. It either doesn't detect my device, or says that it isn't the correct version for my phone (although I downloaded it from the official site).
Any suggestions?
Click to expand...
Click to collapse
Hi, i dont know if yours is an I-Mate but try to go to the i-mate website and download it from there it worked for me and i was just thinking you should maybe give it a try, let me know what happens.
Yes, I had already used it. This was what bricked my I-mate Jam, in the first place. I tried using the NO_ID tool, to try to connect with my device, but it keeps saying that my unit is not designed for this tool.
Nokia 3650 said:
Yes, I had already used it. This was what bricked my I-mate Jam, in the first place. I tried using the NO_ID tool, to try to connect with my device, but it keeps saying that my unit is not designed for this tool.
Click to expand...
Click to collapse
Hi, sorry for the late reply, i used the one named : JAM_UK_Aus_11200_171_11 CDL
hope this helps,
i have now purchased a t-mobile mda 2 but i am having problems with this sim card as it will not recognise any sims i put into it, i have had a bad time with these HTC's that maybe i will not buy any more, this new one i have is my 3rd i think
I got the unit re-flashed with the 'big ROM' versiosion.
The unit now works, but I want to get my other Charmer working now. It shows the bootscreen, then the device turns itself off. I have to remove/re-insert the battery, then do a hard reset to ge it back on.
Nokia 3650 said:
I got the unit re-flashed with the 'big ROM' versiosion.
The unit now works, but I want to get my other Charmer working now. It shows the bootscreen, then the device turns itself off. I have to remove/re-insert the battery, then do a hard reset to ge it back on.
Click to expand...
Click to collapse
hi, again sorry for very very late reply, i now fix these PDA's, have you managed to fix your charmer?
No. I haven't fixed the Charmer as yet. I gave up on that project, as it seemed to be more a hardware problem than the actual firmware.
I'll PM you more on this shortly.
Nokia 3650 said:
No. I haven't fixed the Charmer as yet. I gave up on that project, as it seemed to be more a hardware problem than the actual firmware.
I'll PM you more on this shortly.
Click to expand...
Click to collapse
yeah sure PM me any time, thanks
I am not able to access the bootloader by pressing the three buttons. Device freezes on a black screen. What is the solution?
My frigin HD2 keeps freezing on me on the splash screen. How do I fix this? I'm running windows 6.5 and I can't seem to get past the splash screen. It's mocking me. Someone please help before I smash this thing.
flashed anything recently? do you get RGD info, small red txt, bottom left on splashscreen?
This is my fathers phone and I haven't flashed anything for him since I flashed the energy rom stable version. I get to the small red text and then it freezes and nothing happens.
try the factory reset, switch off - press the up and down volume keys together and hold them in - press the power button release the buttons when you get the white screen read and follow the instructions
johnerz said:
try the factory reset, switch off - press the up and down volume keys together and hold them in - press the power button release the buttons when you get the white screen read and follow the instructions
Click to expand...
Click to collapse
Thank you for the advice. I've tried this and I still get stuck with the opening splash screen. Anyone else?
Try booting the HD2 without te sim card or the SD card in, bit do it ome at a time so you can see of the sim card of SD card might be giving you a problem.
If no joy with that option, then put the HD2 in a sealable plastic bag and then in the freezer for 10 to 15 minutes then try to bootx it. If it boots then the device is more than likely experiencing hardware problems. So if the HD2 is still umder warranty flash the stock ROM and SPL back to the HD2 and send it in for repair or ecxhange.
Thanks everyone for the suggestions, it seemed to be a hardware problem. I sent it back to HTC and they repaired it for a small fee. Now I seem to be having problem with it reading sim cards so I'm not really too sure whats going on with that.
HI everyone it seems that i have the same problem now, i dont know if i should open a new thread. Anyways, i installed RiffleLock v14 and combined it with live wallpaper. I guess this was a "deadly" combination. My phone keeps on restarting . Even with hard reset using physical hardware. After i completed the whole process. When it starts, same problem arises, phone keeps on rebooting... can anyone help me on this?
Bought this phone just 2 weeks at ebay. It is an HTC HD2 Android (this is now the ROM inside phone memory) CM7 Typho0n 2.3.4... cant give you anymore info this is my first time to own a droid.
I already PMed a senior member, but any suggestions and help will be very much appreciated. Thanks!!!
earthworm1102 said:
HI everyone it seems that i have the same problem now, i dont know if i should open a new thread. Anyways, i installed RiffleLock v14 and combined it with live wallpaper. I guess this was a "deadly" combination. My phone keeps on restarting . Even with hard reset using physical hardware. After i completed the whole process. When it starts, same problem arises, phone keeps on rebooting... can anyone help me on this?
Bought this phone just 2 weeks at ebay. It is an HTC HD2 Android (this is now the ROM inside phone memory) CM7 Typho0n 2.3.4... cant give you anymore info this is my first time to own a droid.
I already PMed a senior member, but any suggestions and help will be very much appreciated. Thanks!!!
Click to expand...
Click to collapse
kutos for not starting a new thread! (btw what you describe for your android is called nand.)
my suggestion: start over. flash back to WM, then reinstall android on nand. takes ~15 minutes and will give you a clean start. otherwise, who knows what happened. or at the mininum, reflash your rom. or flash a new rom. but i like the WM option as you can see if is hardware or software as the culprit.
however, reboots can also be to bent battery pins.
"kutos for not starting a new thread! (btw what you describe for your android is called nand.)
my suggestion: start over. flash back to WM, then reinstall android on nand. takes ~15 minutes and will give you a clean start. otherwise, who knows what happened. or at the mininum, reflash your rom. or flash a new rom. but i like the WM option as you can see if is hardware or software as the culprit.
however, reboots can also be to bent battery pins"
Tried and checked that battery pins too! But actually it was the hard reset that baffles me. It takes like a second only, and it restarts. But when it do restarts it is like i did not do a hard reset. I like the advise you gave me, but the problem is i only had this phone for a little than 2 weeks. I cant even flash this coz it is stuck on bootscreen, I cant follow even tutorials on you tube coz it doesn't show that it was messed up like mine before they started flashing it. It's like a "Where do i begin Love Story song lol!!
I tried to contact the person who sold me this phone at ebay but he wont respond.
So what choices do i have here, i dont know how to flash with the current situation of my phone. Am even thinking of mailing this to anyone and giving me a dual boot then and just freakin pay and spend more over this phone. I dont have a choice.....
Any more suggestions here would be greatly appreciated.
hard reset ,nothin changed
i think we are talking about a couple of different things here (maybe).
when i say hard reset i mean - boot into bootloader (3 colored screen) - reboot holding volume key down - and via usb or sdcard flash back to windows mobile. have you done that? can you get to bootloader?
sucks you're having issues...
Yeah i can go to the 3 colored screen. That is actually the first i see before the "white screen"... can you teach me how to do that kind of hard reset??
I dont have WinMo anymore... the guy that sold me this phone put Android as the main OS.
earthworm1102 said:
But actually it was the hard reset that baffles me. It takes like a second only, and it restarts. But when it do restarts it is like i did not do a hard reset.
Click to expand...
Click to collapse
doing a hard reset when magldr/android is installed is pointless, because it doesnt reset anything, (or i think ive seen it said that it hard resets magldr, the effect is the same, , , nothing happens) which is why it only took a few seconds.
earthworm1102 said:
Yeah i can go to the 3 colored screen. That is actually the first i see before the "white screen"
Click to expand...
Click to collapse
still got a leoimg.nbh on your sd card? could explain the white screen,,,
when i say hard reset i mean - boot into bootloader (3 colored screen) - reboot holding volume key down - and via usb or sdcard flash back to windows mobile.
Click to expand...
Click to collapse
thats not a hard reset, thats flashing back to stock.
samsamuel said:
thats not a hard reset, thats flashing back to stock.
Click to expand...
Click to collapse
yep yep. tis what i meant.
@ the op, since you didn't put the rom on your phone, i would flash back to stock (aka back to windows mobile) and get rid of android. then put back android. see what happens.
read this thread, #5 to be exact to get back to windows mobile:
http://forum.xda-developers.com/showthread.php?t=893948
this will get rid of android, save your hspl which will make putting android back on easy. however, if the problem exists in wm, is out of my knowledge, and is not seemingly software and more likely hardware. but if samsamuel thinks different, he knows a ton, and has helped me out of many a pickle. cheers.
K bro. Thanks!! +1 thanks for you!!!!
@samsamuel am talking about the white screen wherein you will hard reset ( holding volume up/down and red key). Oh well. I just talked to the person whom i bought the phone he will just put back original rom and i might just have a dual boot. Hope this will be much better. Thanks guys!!
Learn from our mistakes.... this will be sticky for me!!!
guess samsamuel is the man!!!
well glad you will have a solution. but just so you know - dual boot means one of two things - WM on your phone and android on the SD card or WindowsPhone7 on your phone and android on your SD card. No "real" dual boot per se.
honestly, i would try to look at putting on your preferred rom. good luck!
You mean dual boot isn't good? Is that more of a disadvantage rather than an advantage. Or will a noob like me [email protected]##ed this phone again and will be in more trouble?
Not saying good or bad. Rather dual boot means android is on your SD card. Very easy to get this going. Wont hurt your system. Just being informative.
I prefer nand android but that is my preference. If you will never use windows mobile and only android I would forget dual....but is all about preference. Cheers.
Sent from my HTC HD2 using XDA App
I think here might be something wrong with the htc sense, but the thing is, that my hd2 touchscreen wont respond to my touch. When i'm at the unlock screen, i cant slide it to open up. This wont change after reboot either.
So eventually i set a hard-reset on the phone, but it didn't work after that either. I tried three times, no respond. Without the sim and with it in.
I cant recive calls or text messages, because i cant tap my PIN in, neither i could open or answer. I'm f***ed.
Okay, the next day i do my fourth hard-reset, and it starts working again, but after a time of use, it will start getting slow with the touch again, and then it will stop responding again. So I don't now what to do. There is now warranty time left, so i want to see what i can do my self before taking it to a repairing place and pay 100 € for it.
This is my everyday phone, and i would like to get it back to normal state as soon as possible, so many many many thanks to all who try to help me out of this
Cheers,
Nother
notherman10 said:
I think here might be something wrong with the htc sense, but the thing is, that my hd2 touchscreen wont respond to my touch. When i'm at the unlock screen, i cant slide it to open up. This wont change after reboot either.
So eventually i set a hard-reset on the phone, but it didn't work after that either. I tried three times, no respond. Without the sim and with it in.
I cant recive calls or text messages, because i cant tap my PIN in, neither i could open or answer. I'm f***ed.
Okay, the next day i do my fourth hard-reset, and it starts working again, but after a time of use, it will start getting slow with the touch again, and then it will stop responding again. So I don't now what to do. There is now warranty time left, so i want to see what i can do my self before taking it to a repairing place and pay 100 € for it.
This is my everyday phone, and i would like to get it back to normal state as soon as possible, so many many many thanks to all who try to help me out of this
Cheers,
Nother
Click to expand...
Click to collapse
Have you flashed HSPL on it or this is all stock ROM?
honestly it looks like a hardware issue to me.
well i looked at the stats, and seems like i have HSPL on it, but it's not bought from a reseller, it was bought second-hand. it has worked perfectly until a few days ago, then the freezing started.
notherman10 said:
well i looked at the stats, and seems like i have HSPL on it, but it's not bought from a reseller, it was bought second-hand. it has worked perfectly until a few days ago, then the freezing started.
Click to expand...
Click to collapse
ok if it has HSPL on there that means someone flashed something on there.
I would flash task29, then flash the ROM of your choice and see if it still does it.
If the ROM is the problem a hard-reset won't fix it, so let's try this and see what happens.
Okay thanks for the help
the only problem is that i'm running on a mac, and i cant find any software to flash the hd2 on a mac..? Do you now any?
and could you link me a thread or a tutorial to how to flash 'cause i'm quite new with this anyway.
Thanks!
notherman10 said:
Okay thanks for the help
the only problem is that i'm running on a mac, and i cant find any software to flash the hd2 on a mac..? Do you now any?
and could you link me a thread or a tutorial to how to flash 'cause i'm quite new with this anyway.
Thanks!
Click to expand...
Click to collapse
There is no way to do this on a mac, find a PC.
ok, here's the quick version.
1) download the attached file from this post:
http://forum.xda-developers.com/showpost.php?p=5848003&postcount=19
2) turn your phone off, then turn it back on while holding the vol-down arrow, this will bring you to a tri color screen. Make sure you are plugged in via USB.
(you could do this via activesync, but I want to avoid the freeze so this gets you right into bootloader)
3) unzip the file and run it, follow the on-screen instructions, it will flash task 29, which is basically a good reformat.
4) if you are fast, hold the vol down arrow when it reaches 100% and don't let go till you're back at the tri-color screen. If it goes to the splash screen it will stay there forever (because there is nothing flashed on your phone now). You have to do a battery pull or press the reset button. In this case hold the vol-down arrow again and power on the device to get you into the tri-color screen again.
5) Download the ROM of your choice from this forum:
http://forum.xda-developers.com/forumdisplay.php?f=534
They are all custom ROMs, my favorite is the this one currently:
http://hotfile.com/dl/117879873/9b01b43/Energy.Leo.29020.Sense2.5.Cookie.2.0.sencity.May.14.7z.html
It was taken from this thread:
http://forum.xda-developers.com/showthread.php?t=591784
and is the awesome one with big finger friendly buttons as well as that awesome blackish theme (Sencity)
If you don't want a custom ROM then go to the HTC support site and find your stock ROM, download and flash that via SD card (I am assuming you have an international HD2 and not a TMOUS one).
If for some reason you have a TMOUS one DO NOT GO THRU HTC BUT USE TMOBILE'S SUPPORT SITE.
Let's get you rocking and rolling!
Thank you very much for your help, i'm very grateful
I'm going to run W7 virtually, just to be quick.
And I was thinking to flash straight to Android, is that possible? Like android 2.3 or something.
Cheers!
sorry if I made you unhappy, but my phone is now in a technic service due to same problem, it never fixed with a rom update, day by day your problem will appear more frequently, this is a hardware issue, maybe digitizer maybe hardware buttons block your touch screen.. I will see what will happen after my phone come to my hands again..
Okay thanks.
I will see what the reflashing will do. Then if it doesn't work, i will take it to repairing.
Thanks!
notherman10 said:
Then if it doesn't work, i will take it to repairing
Click to expand...
Click to collapse
definitely send to repairing and dont try any thing by you self ... you will end doing more damage - except Software solution...
anyway i wish all the best and i hope you fixit
best regards from me
Hi there people.
my phone is bricked. i can't even get to the TRI COLOR bootloader screen for HSPL.
there's no response with the power button adn the volume key.
i'm basically trying to ask this:
is there anyway to reinstall the very CORE-FIRMWARE of the hd2? that is, reinstall even the tricolor screen itself. because for somereason there's no way to the tricolor screen, the hd2 just won't power on.
thanks for the help .
What a bad situation ... But don't worry ... use JTAG ...
maxmayhem said:
Hi there people.
my phone is bricked. i can't even get to the TRI COLOR bootloader screen for HSPL.
there's no response with the power button adn the volume key.
i'm basically trying to ask this:
is there anyway to reinstall the very CORE-FIRMWARE of the hd2? that is, reinstall even the tricolor screen itself. because for somereason there's no way to the tricolor screen, the hd2 just won't power on.
thanks for the help .
Click to expand...
Click to collapse
Dear friend ... I think you can make it using a JTAG Box ... if you search in the net , you can find many manufacturers which sell / give JTAG service ... that's it ... Good luck
With Best Wishes
Hitman1376
First, check the battery pins aren't bent.
Checked everything
Hi.
i seem to have checked everything when it comes to getting it to power on.
but it won't.
1. checked battery pins,
2. tried freezing.
3. tried reseting,
4. hard resetting.
5. charged the battery from an outside source. nothing wrong with battery.
the phone detects in windows, even when it is powered off.
it says so with the MY HTC drivers,
is there anything i can do with the phone with the phone not powering on, but IS detected in windows.
in other words, what i need is some sort of OFFLINE FLASHER. something that'll flash the phone without turning it on.
hope ya'll can help. there's obviously something i'm missing. you know how it is, sometimes you just miss something and it's right there in front of you........ where did i put my car keys?
thanks.