I have a g1 t-mobile edition, and just unlocked it and put my o2 sim in.
Is there a way to get the latest (1.6 i think) version of android on?
If so will i lose any of the t-mobile branded bits?
Thanks.
Are you rooted?
If not, you can find the Official T-Mobile 1.6 OTA(DRC83) --here-- you will probably need to install CRC1 FIRST which is located on the same page. This was the procedure I followed to update my unrooted G1 from 1.1
If you have root, you can get the rooted 1.6 from --here--
What T-Mobile branded bits are you referring to? I've noticed The Official seems to be missing MyFaves, whereas the rooted has myfaves, don't know what's up with that...
Nope not rooted, the device is straight out of the box.
Sorry for the vagueness but the tmobile bits i was referring to were losing the t-mobile ring tone, and youtube app?
Also i have a UK version, arent these OTA images region specific?
Finally, when you say i should install the CRC1 first do you mean the 883kb file?
Bit confused as 1.6 is 14.3mb (i.e. small). Dont i need to install 1.0 to 1.5 first?
duplicate post.
sry this is where I have to step aside and hope someone else jumps in :/
Ya, the CRC1 is a super small security update but for some reason I couldn't go from CRB43(cupcake) to 1.6(donut) w/o it. (update fails)
Not sure about the UK vs US versions.. (why I'm hoping someone else can jump in)
All t-mobile bits included(I think their actually just left alone), this is actually a small cupcake mod update. yes 14mb is correct.
Under settings->about phone, what does it say under firmware version? Reason I ask is you may need to update to CRB43 before moving onto 1.6. This would probably help the next helper as well..I still have alot to learn
Firmware version is '1.0'
Build number is kila_uk-user 1.0 TC5-RC8
Slightly hesitant about downloading these images as they are us images and i need a uk image (different number format etc).
Also anyone know if i put in a t-mobile pay as you go sim it will update?
Also (sorry!) does this update come through 3g, and if so does it use your data allowance?
Related
I already installed a version of "Cupcake" manually. Will I get the update automatica
A: G1 devices that have been manually updated with an early version of Android 1.5 will not receive the Android 1.5 OTA as the device already assumes it has received the software.
T-Mobile does not support manual installations and will not assume responsibility for any device problems or failures as a result.
This was taken from the tmobile forum...
what do we ave to do to get the tmobile update...
Also..if i have JF 1.5 and wan to switch to haruyko's do i need to remove jf 1.5?
tia
Well, since you're rooted you won't receive the OTA update. If you wanted the "OEM" T-mobile update, you would have to "unroot", or the better alternative (IMO) wait for the modified version of the T-Mobile update once it gets done by one of the update guys (JF, Haykuro, Dude, etc...)
If you have JF 1.5 and you want to move to another one, you don't "remove" the ROM, but just flash the other one on, it's recommended to wipe the phone before moving on to the next one.
Very basic stuff here already covered in the update threads, just an FYI.
Thanks again, pardon me for asking such noob q's but with all the activity going on its just really hard to find answers ..plus with all the bricking going on I just wanted to ask directly.
I've been getting a notification about a security update on my magic. It claims to have already downloaded it (4.6mb), and is asking to install and reboot.
Does anyone know any details about the update? Version numbers, etc? What it changes?
Forgot to mention my current versions:
baseband - 62.50s.20.17u_2.22.19.26I
Kernel - 2.6.27-00392-g8312baf [email protected] #72
Build - crb17
I never received such notification. When I go to System Update, it says that my phone is already up to date. It got exactly the same version as yours.
Me neither - all versions the same. :-o
all Magics with CRB17 software will soon receive an over the air
(OTA) software update approximately 4.5 MB in size
This is a security patch, and nothing to worry about it, everyone with the affected software should get it in the next week.
I'm more worried about it blocking any future hacked firmwares being installed - eg the new rooted firmware 6.0
Upgrade in Vodafone ES network
I have just updated the firmware of my magic. It had CRB17. After the upgrade the new software versions are:
CRB43
62.50S.20.17U_2.22.19.26I
2.6.27-00393-g6607056
bye
i have received today the same notification in my htc (vodafone spain). But, what about the root??
@IsAhT sorry but I did not have it rooted before the update, so I cannot tell you the effects of this upgrade over a rooted terminal.
got the same thing right now...i just updated it..
i guess .......... if it is just a update to the firmware system should not effect the rooting.
How does the update process work? I'm on a rooted Vodafone UK Magic, but using the Orange mobile network. I've installed Haykuro's SPL, and About phone -> System updates says it's up to date, but the build is CRB17.
Maybe I should give his 6.0r1 ROM a try...
well i am on voda uk and i am not getting any updating because im using the 6.0 sapphire rom were the system update is disable obviously.
that you are on orange and still running CRB17 should be able to get the update. i think they roll the update gradually like TMOBILE done with the G1 to upgrade to cupcake 1.5,they started with 10% then 20% and so on of the G1 population till they hit 100%.
so after the rooting process installing haykuro's SPL, whats the 'best' rom to choose and where can i get it?.
im on CRB17 as well after trying to get root, which i dont think worked. Is there pre-rooted rom floating about?
im on vodafone UK magic as well
I've searched around the forum and can't find anything so I figured I'd just ask.
I ran SEUS and it says there is an update available, and the first time it downloaded a 133 MB file, but i didn't notice anything different when I rebooted the phone. Now it keeps telling me there is an update available, but it doesn't seem to download anything and the update doesn't seem to do anything either.
Anyone have this happen or know the thread where it may have been addressed before?
[UPDATE I actually found some other users in the Update 1.6 by country thread so I'm just going to post there from now on. I don't know why I didn't think of looking in there. http://forum.xda-developers.com/showthread.php?t=717818&page=30 ]
You need to give us some information about the update and current version you have FW.
Seus has never found an update for my phone. I've manually upgraded firmware twice and currently using ver R2BA024.
Does Seus allow update by country? Has anyone in Australia gotten update through Seus?
I have. When I plugged my X10 in it and I pressed the Update button it told me there is a newer version available.
Nimche said:
You need to give us some information about the update and current version you have FW.
Click to expand...
Click to collapse
I'm on the stock AT&T firmware. I just got the phone last week.
I am assuming that you don't know where to read the firmware version.
Push the left button on your phone while you are on the main screen(no lock)
select "settings" and then go all the way down to the end and select "About Phone" and read the last number which is says "Build Number"
The page you are actually on has the least information about your phone.
I am aware that there was an update for ATT last to couple weeks ago but sometimes SEUS goes crazy and notify you when there is none. Your phone probably is branded "means that att has locked it" and you may want to unbrand it (you can search the development section for that) you can also root to get access to all the programs if you need to uninstall them.
Unfortunately Android 2.1 is not out for this phone as of now but it will be. They will first release for unbranded phone (this is what they have told us) and then branded later this year. It may take sometimes for ATT to update but if you wait you can flash a different one when its available on this forum later.
I hope I could help you a bit.
Nimche said:
I am assuming that you don't know where to read the firmware version.
Push the left button on your phone while you are on the main screen(no lock)
select "settings" and then go all the way down to the end and select "About Phone" and read the last number which is says "Build Number"
The page you are actually on has the least information about your phone.
I am aware that there was an update for ATT last to couple weeks ago but sometimes SEUS goes crazy and notify you when there is none. Your phone probably is branded "means that att has locked it" and you may want to unbrand it (you can search the development section for that) you can also root to get access to all the programs if you need to uninstall them.
Unfortunately Android 2.1 is not out for this phone as of now but it will be. They will first release for unbranded phone (this is what they have told us) and then branded later this year. It may take sometimes for ATT to update but if you wait you can flash a different one when its available on this forum later.
I hope I could help you a bit.
Click to expand...
Click to collapse
And I assumed you would know that the stock AT&T FW version was 1.6 and the build number is R2CA016 which I thought was common knowledge and is why I didn't initially post it. I guess both of our assumptions were wrong.
I know my way around android and I already knew everything you posted. None of which answers my question except for the part about SEUS going "crazy". I didn't want to even try doing a full root and going to a different build until after the 2.1 update. I've used SWM to load the x10 root app so I could use Titanium to remove the at&t crapware already. I'm sorry if this sounds rude, but I'm not a noob and 90% of your post was made with the assumption I was.
I've been following all of the 2.1 update threads and I wasn't even considering it was the 2.1 update. I just wasn't sure what it COULD have been since I also couldn't find any kind of update history either.
[................delete...............]
I just recently picked up a dell streak. It's brand new with what I'm guessing it the latest shipped rom which is build number 15274 running android version 2.2.2
All I see is custom roms and reflashing back to other roms to root....blah blah blah...is there a way to just root my current rom and not have to flash a completely new one? I'm all for supporting the community, I'd just like to keep this as device as clean as possible and remove all the bloatware.
InGeNeTiCs said:
I just recently picked up a dell streak. It's brand new with what I'm guessing it the latest shipped rom which is build number 15274 running android version 2.2.2
All I see is custom roms and reflashing back to other roms to root....blah blah blah...is there a way to just root my current rom and not have to flash a completely new one? I'm all for supporting the community, I'd just like to keep this as device as clean as possible and remove all the bloatware.
Click to expand...
Click to collapse
Download SuperOneClick v1.5.5 and root away. Dont forget to put your phone into USB debugging mode before rooting, its very important that you do that. Or just follow the steps in this link http://forum.xda-developers.com/showthread.php?t=925853 good luck.
Wow thanks, I totally skipped over that post!!! I guess from what I was reading I was expecting the whole process to be a lot more complicated.
Thanks a ton!
Anytime.
«---:: ((รєภҭ ғг๏๓ ҭђє ๓๏ҭђєг ๏ғ คใใ קђ๏ภє'ร ๔єใใ รҭгєคк!)) ::---»
How come Dell don't push out the 2.2.2 version OTA to their customers?
I check for updates every day, but have just once received any. (2.2)
Their way of saying; "we just don't give a f*ck about our customers"?
You should have gotten that update weeks ago. It's been OTA for probably about a month now. And I don't know how much you've read, but a lot of what happened with not updating from 1.6 was probably AT&T's fault because they wouldn't okay the build (speculated). Dell had the source up for 2.2 for a long time, if I remember correctly.
I'm on unlocked stock EU ROM since day one. Just to clarify.
Do you mean the 2.2.2 was shipped OTA, for EU users too?
Ohhh. Didn't notice you were on EU. I don't know if Dell released one for EU yet (probably hasn't since you don't have the option to OTA). Just remember that it's not just the phone maker responsible for updates, the carrier has some say in it, too. Are you still on 1.6? Because you could always try out DJ Steve's ROM if you wanted to try something different.
No, the one OTA update I received, was the 1.6 --> 2.2 on last October.
Since then - nothing. I guess it's only in America people get the 2.2.2.
Thanx for taking time to reply.
No problem, haha. I hope you get it soon
I really want the update to, I'm in the Uk and I'm still on 2.2, I would do it myself but its just to complicated and don't wanna mess up my phone. Has anyone in the Uk got the 2.2.2 upgrade? And to be honest I really wont the 2.3 upgrade, but seeing as we still don't have the 2.2.2 upgrade, I think we'll be waiting a long time :'(
2.2.2?
If someone updated from 1.6, to the "non official" 2.2, is there any difference between it and 2.2.2?
2.2.2 is supposedly immune to the malware loaded from the 50 or so infested apps that Google removed recently from the market.
Sooooo, like alot of people here that either couldn't wait or didn't think we were getting the update, I flashed my x10a with a generic firmware(now an x10i). I believe my original region code was 1233-6929. My question is, how would I go about putting the official firmware back on? I've searched and can't seem to find out how to do this. Any help would be greatly appreciated.
According to this
http://forum.xda-developers.com/showthread.php?t=1186045
1233-6929 has been updated to 2.3. There is no need to go back to 2.1.
Did you not make a backup of the 2.1 ROM with xrecovery before you flashed 2.3?
Why do I get that feeling that I'm going to kick myself in the butt for not doing that? Anyway, I should have added the fact that I am currently on a generic gingerbread firmware but would like to know how to put the official update on my phone?
No, no you're fine unless you absolutely need to go back to Eclair.
http://forum.xda-developers.com/showthread.php?t=936733
Flash the 2.3 firmware for X10a with the flashtool. I've got to tell you, all the 2.3 upgrade has the same build number (3.0.1.G.0.75) and the firmware you are currently on is no different, except what the "model number" says on phone's property.
You can try updating the firmware through SEUS or PC Companion, but there will be no difference.....
Alright, thanks for the info. Looks like the owner of the thread you linked here doesn't have all the x10a kits added yet (which I'm assuming includes the Rogers one I mentioned) so I may have to wait for a bit before it's available for download so that I can use it with flashtool? The only reason why I want to go with the official update is because I've had a few glitches with the generic one I currently have. Every once in a while I get some error messages pop up on the screen, one that I can recall is "failed to create media transport" and some other ones. Plus if I ever plan on selling the phone, it probably would be best if it had the official update on it (just itching to get the galaxy s2).