P3400 goes dark (low Light) - P3400 General

Gene P3400:
Does any body got the Service Manual or Schmentic diagram of P3400...
actually the screen goes deem light all of a sudden. I try to reset but no use, further I also try other LCD screen but the same...
it would be appriciated.
search sec. I didnt found any thread.

you tried another battery?

^_^
Hard Reset It Not Only ..... Reset ........

gaurav_v said:
Hard Reset It Not Only ..... Reset ........
Click to expand...
Click to collapse
thanks brother for your reply.
I tried above said trick i.e. replace battery & hard reset but no gain...
sombody got strong solution?
plz help !!!!!!!!!!

does any body got schmentic diagram of gene p3400 ////???????

HTC P3400 service manual
Hello Brother
I have uploaded HTC P3400 service manual(official) for you.
Hope it will solve ur problem
UR LINK
http://ifile.it/tyezgi6
Mods-if i have breached any rules forgive me as i want to help a distressed soul

nelsonoski1972 said:
Hello Brother
I have uploaded HTC P3400 service manual(official) for you.
Hope it will solve ur problem
UR LINK
http://ifile.it/tyezgi6
Mods-if i have breached any rules forgive me as i want to help a distressed soul
Click to expand...
Click to collapse
Thanks Buddy. I need this file desperately........

Related

XDA ROM update crashed - pease help

Hello,
I know, i am not the first one with this problem and i read many threads but i am not clearly understand the way (if there is a way) to fix my problem.
After updating my german xda Device i restarted and have been promped to enter my Pin, but the screen is frozen. So i did first a soft and after this a hard reset. Now after every hard reset i see the the O2-bubbles for some minutes and then the white screen with the blue bar on the top. Nothing is working.
I i wait for 10 or 20 Minuten the bubbles coming back - same game everytime.
I tried to enter the bootloader while holding the Power-Button while soft-resetting. BootLoader is seen, but shows a "gsm error".
I can not establish an active-sync-connection via USB-Cradle.
What can I do to rescue my XDA? Is there any possibility or can i put it to trash?
Any advice is very welcome!
Thanks!
Miwu
Dear all,
I am facing the same problem (XDA ROM update crashed) as miwu now . Can any expert teach me how to solve this problem by myself :?: or I need to let O2 engineer to fixing it :!: .
Thanks a lot !
Please HELP !
Dear all,
I can't get the white screen with the blue bar on the top because I am using 02 xda ver 4.00.11 (PPC2003), so that I can't use the repair.zip to fix it.
Any expert can to teach me how to fixing it by myself ?
Thanks !
Hi,
after half a night i fixed my described problem with the gsm-error in the bootloader.
I will post my solution in a new thread today in the afternoon.
Thanks to XDA-Developers for this great forum, its very helpful.
Thanks and regards from Berlin!
Miwu
Miwu,
That's great for you !
BTW, do you using PPC2003 as well ?
Hope to see your solution soon !
Thanks ! :wink:
Hello,
just posted my solution in a new thread
http://xda-developers.com/phpBB/viewtopic.php?t=2489
take a look there.
We first tried to fix it using 2003-SD-Flash but it become buggier, the pling-sound does not played, so we flashed back to PPC2002 and made it as described in the new thread!
Hope, you can flash CE with an PPC2002, maybe it helps, but I do not really know. Simply try or not!
Best regards from Berlin!
Miwu
I will try but I don't think it will work on mine because I am using bootloader v5.17 . Anyway, think for your help !
Best regards ! :lol:

FORMAT FAIL !! during a hard reset.

hey guys thanks for being helpful alot of times..
My O2 XDA MINI S gets stuck at the startup operator logo ..
I FLASHED IT WITH THE NEW 2.21.4.1 ROM AND OS ,, but its still the same
NOW IM TRYING TO FORMAT IT WITH A HARD RESET BY PRESSING THE SEND BUTTON ,,BUT IT SAYS "FORMAT FAIL"..... Please help me as i really miss the phone..
I am afraid that usually means you have a faulty rom memory chip. Send the device back to the supplier for repair - its a hardware problem not a software problem.
Thankz for the reply ....
BUT IF ITS A hardware fault how was i able to flash it to the newer version ? 2.21 ?
Is there any thing else i can do to the phone ? to make it ? LIKE THE IMEI OR SOME KIND OF LOCK ?
help would be appreciated !!
simlockboy said:
Thankz for the reply ....
BUT IF ITS A hardware fault how was i able to flash it to the newer version ? 2.21 ?
Is there any thing else i can do to the phone ? to make it ? LIKE THE IMEI OR SOME KIND OF LOCK ?
help would be appreciated !!
Click to expand...
Click to collapse
The rom will flash but stll fails to boot - there have been other posts with exact same problem and that was the reply by summiter or faria if I remember right. (Both v experienced at flashing and putting together roms) Do a srearch - failed format will prob find those posts.
alright i will research and get back .... thankyou very much .. appreciate your help
I DID ALOT of researching and got this.. please see it im sure everyone will need it some time.... and please advise me on what to do next ..my email is
[email protected]
if you have a os dump of a O2 XDA MINI S .. please mail it to me
Regards
ive heard if I can upgrade the phone through the SD CARD then it can get back to normal ..
Please some one can be kind enough to guide me through it or mail me the dump of the os for the sd card.. O2 XDA MINI S
Me too ! The same to you !
simlockboy said:
ive heard if I can upgrade the phone through the SD CARD then it can get back to normal ..
Please some one can be kind enough to guide me through it or mail me the dump of the os for the sd card.. O2 XDA MINI S
Click to expand...
Click to collapse
I had and now I can't do anything, so hope somebody help us, try to find out how to save ourlife's !
Pls help us !
ps: My' mobile is T-Mobile MDA
Me too ! The same to you !
Pls Mod delete it for me ! Thanks !
formate failed
i have o2 1.5.4.2
ipl spl 1.05
flashed with lauch rom
steel same
whats a problem...

Dopod C800 stuck in boot screen.... plz Help

Hi Can anyone please help me how to overcome my problem? My device is stuck in the boot screen . Things don't change even after hard reset...Can anyone upload the original shipped rom for Dopod C800 1.09 rom?
hey my friend the same just happend to meee ;(
Do you found a solution ?
murali509 said:
Hi Can anyone please help me how to overcome my problem? My device is stuck in the boot screen . Things don't change even after hard reset...
Click to expand...
Click to collapse
put the phone in bootloader and flash the original rom
I have the same problem. No matter what rom code I flashed, always update error 300. Is there any idea to get rid of this problem? Thanks!
Strange... Isn't error 300 about using a RUU flasher on the wrong device?
Got my device to life after going to the service centre.... Successfully changed my Rom this time after using Hard spl by Canonyang and now I had flashed Touch IT V4.40....
My sincere advice from my experience...
Please read the instructions thoroghly before you attempt anything..
Happy flashing
murali509 said:
Got my device to life after going to the service centre.... Successfully changed my Rom this time after using Hard spl by Canonyang and now I had flashed Touch IT V4.40....
My sincere advice from my experience...
Please read the instructions thoroghly before you attempt anything..
Happy flashing
Click to expand...
Click to collapse
THANKS!!!
We tell it soooooo often. But it is good to hear that your device is back to life.
And it is GOOD to hear that the instructions we are giving - are helpful...
FOR EVERYone...
Hey dude, thanks a lot for your new rom... I'm a novice in this field and dont know anything..Does ur rom touchit4.4 have keyboard issues on Dopod C800?
murali509 said:
Hey dude, thanks a lot for your new rom... I'm a novice in this field and dont know anything..Does ur rom touchit4.4 have keyboard issues on Dopod C800?
Click to expand...
Click to collapse
it´s NOT mine. it is ITJE!!!
please ask in this thread. and please find out keyboardissues by flashing. i guess there is noone else with dopod running it...
Thank u for the quick reply....

SP3 Dead Need Urgent help !!

Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Ok first download a proper ROM for your SP3.
I think you can use the procedure as when you want to revert to wm2003 on this tread:
http://forum.xda-developers.com/showthread.php?t=279464
Thanks !
Hi,
Thanks a lot buddy ! but the said procedure only works if the phone is atleast in the bootlaoder mode (i,e the tricolour mode) but as I said mine is almost completely dead (no lights when charger or the usb is connected and not powering on,I mean not even the LED glows) !!!!
So Am kinda stuck in this stage ! so I need a real trick to some how gain access to the ROM and flash it completely and install the proper one ( I mean I have to erase the EEPROM completely !)
Its similar to the one in the post #8 in the link you've sent !! and the answer to it in post is what I don't want to hear !!
Anyways thanks for quick reply man ! really appreciate it !
Regards.
Hi, are you solved your problem with your phone, if not i can help you, Wright me to PM...
P.S. For all Who unlock his phone via Imei-check, please send me your used "Key file"...
charge ur batire an tray agin baby
and tel me morrrr
handsome1_blr said:
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Click to expand...
Click to collapse
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
defcomg said:
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
Click to expand...
Click to collapse
Wright me to PM...
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
defcomg said:
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
Click to expand...
Click to collapse
For what you want use jtag-pinout-detection? Links on this site are dead, and hear you can find Jtag pins for Typhone: http://forum.xda-developers.com/showthread.php?t=414103

HTC atom arte 200 help!

hi mates!
b4 i ask this question just want to greet all forum members here..
regarding htc atom arte i have problem when im going to programs its getting stuck..
just wana ask wat is the best way i can do on this trouble...
have any idea???how can i hard reset this phone.?
tnx in advance..
br.
richard_xcellent
just want 2 up this one..
i also try 2 hard reset but still dsame problem..
anyone help me!

Categories

Resources