sorrt guys
I a.m sure I am being thick so please be kind.
I have a stock m700 which i use purely as a sat nav
I have a htc TD2 as my main phone.
I see that there is a device the io player
http://www.my-io.com/Products/iOPLAY.aspx
which enables me to use the car stereo as a hands free kit on the td2
i can also use the m700 with tomtom6 via the car stereo if the m700 can support a2dp.
had a look on the phone and couldnt see any confirmations.
can someone please confirm if it does have the capacity and if i need to do any tweaks to get it playing through the car stereo via the io player.
thanks in advance
Related
Hi i'm soon to be buying a XDA 2i, so I can bin my existing phone, PDA and Sat nav gear and replace it with one piece of kit ! Whoopee.
Can anyone offer some advice on what is the best car phone kit / cradle option (needs to be good as I do a lot of business phone calls on the road), that will be compatible with Tom Tom 3 or 5.
Not fussed whether car kit / GPS reciever is bluetooth, I just need it to reliably work when switching between calls and sat nav.
Many thanks for any advice recieved - superb site.
car kit holux cr100 gps and amplifiedspeaker and a bt headset works fine
Hi
I just got my new BMW 330 (E90) with Navigation and Bluetooth. I can pair my MDAc but that's it.
When a call comes in, My BMW signals it. Sometimes I can get the call with the button in the steering wheel. Sometimes not. Sometimes I can but the connection breaks down in the middle of the call.
I see the reception of my MDAc in the display and when a call comes I also see the number of the caller.
I cannot make a call (dial out).
I read a lot but did not find a solution yet. Has anyone experience with BMW carkits or any advice what to change in order to get it going. I sort of refuse to have another handy...
BTW I have the latest T-Mobile Update (1.12) but I did not install everything from the extended ROM.
I have exactly the same problem with Audi bluetooth, with my Nokia 6230 works perfectly, with my S100 I have the same problems you have experienced. I have an old ROM 1.06, but I see that even with 1.12 the problems are not solved.
I tell what I tried: I've installed various BT stacks (Toshiba, Widcomm, Bluesoleil also with crack). Toshiba pairs but does not find any service, Widcomm does not run, Bluesoleil does not have the needed profiles.
I have installed the CAB from VCABT project (see the thread in this forum), I can answer from the car I can call using the car voice command but I can't use the S100 buttons.
Hope that somebody could help us.
dgv
fdigianv, have you tried the new A2DP Stereo BT Tool to see if it works better with your Audi.
I just upgraded my JAM to 1.12 and have yet to try it with my Audi A6 4.2 2005 MMI BT System.
I'm tired of waiting for Audi to fix anything. It seems like the only fixes or upgrades they offer come in the form of a new car release.
I like you can call out from the Audi, but those on thger other end of the call complain about sound quality.
I'm getting ready to make a move to the new Treo MS Mobile device, or a smartphone that works better with my Audi.
I spoke to BMW this morning and they claim has more to do with the version of Bluetooth installed on the phone than BMW's implementation of Bluetooth.
BMW supports Bluetooth verson 2 and up.
Hi. I have a MDA Vario, ALK Co-Pilot with Bluetooth GPS & a Pama "Plug'n'Go 4" Bluetooth Car kit.
I can use the Vario and the Car Kit together with out a problem and I can use the Vario and the Sat Nav with out a problem, but I cannot use them both together. When you run the Co-Pilot software on the phone with the car kit paired it disconnects the car kit, then the car kit re-connects itself, then it disconnects etc.......
I have looked in the bluetooth pairng for the Car kit and their are no settings I can change, and the Co-Pilot software talks directly to the Bluetooth GPS receiver and thir are no settings that can be changed in that either. I am stuck. Co-Pilot say its the Car kit and Pama say it is the Sat Nav, and the guy in the T-Mobile shop says it could be the Windows Mobile 5.
Does anyone know if TomTom or any other Sat Nav vendor do a demo version for Windows Mobile 5. That way I can see if it is a Co-Pilot issue or not, I know people with Sat Nav systems but none of them are for Windows Mobile. I also know a couple of people who use bluetooth headsets but not car kits, I cannot get on with headsets, after about half an hour I want to throw it out of the car window. I have asked if I could borrow a car kit from the T-Mobile shop, but they said no!!
I downloaded and installed the latest rom from T-Mobile last night, it was only released on the 19/06/2006, but it did not fix any thing.
Regards
Andrew
Hi sysmanuk i have got copilot and vario and hve used it fine on a parrot 3100 i also used tomtom again no problems this was on the old tmobile rom not used it on new rom but it sounds like it is the pama device causing the problem can you upgrade its firmware if so try that
Hi ya,
I can confirm that i use tomtom, a parrot ck3000 and a holox bt-321 with no problems. They all stay paired.
I can either turn the BT on before i get in the car and thus just have the ck3000 pair, or i can have BT turned on paired up with the ck3000 then start Tomtom and have no issues. Or i can just start tomtom with turns the BT on and then this auto pairs with the GPS unit and the ck3000.
I hope this givess you some help in to finding out what is causing the issue.
I had this issue, using the T-mobile MDA Vario release rom, a Parrot ck3100 & tomtom5.21 with a bluetooth rikaline gps.
If both used together, the car kit would randomly disconnect bluetooth, and the gps would also randomly diconnect.
Used seperately they were fine.
I went back to using the Vario with the Parrot, and my old Ipaq for Tomtom/GPS.
I have now updated to the Mr Clean rom, and plan on retesting once I reload all the software.
Hi all
I have an Orange SPV M600, and a Nokia carkit. I would like them both to work together.
Has anyone ever done this? I'm assuming it's a case of getting a cradle for the M600 from a proper M600 car kit and modifying it to work with the existing wiring?
I don't want to take the existing kit out to fit a new one, as the cabling for the mic goes through the headlining and that would be a pain. I'd rather use the existing if possible? Does an M600 car kit exist?
Thanks for any advice.
I'm hoping someone is having the same experiences or can help recommend a solution.
I have trinity (Obviosuly) with the latest WM6 rom from the Manufacturer, with Radio 1.50.
I use a TomTom One v2 (with bluetooth), and a Parrot 3200ls.
The TomTom has the latest firmware, as does the Parrot.
When trying to get traffic updates to the tomtom thorugh my trinity, the connction works the first time, but switch off both the tomtom and the trinity, the connection never works again and has to be re-setup.
The Parrot will connect to the phone, but sometimes will not connect at all until i reset the trinity, when it does connect sometimes the sound and mic wont be routed to the car kit and you have top physically pick up the phone , not a good idea in communist Great Britain when your driving!
Ive tried different ROMS, I even tried downgrading my radio to 1.45 with no success.
The trinity is a great device but not being able to use the bluetooth car kit safely, and the tomtom plus services, is seriously making me consider going back to my SE k610, which I really dont want to do but I know works flawlessly.
Thanks in advance.
Craig f said:
I'm hoping someone is having the same experiences or can help recommend a solution.
I have trinity (Obviosuly) with the latest WM6 rom from the Manufacturer, with Radio 1.50.
I use a TomTom One v2 (with bluetooth), and a Parrot 3200ls.
The TomTom has the latest firmware, as does the Parrot.
When trying to get traffic updates to the tomtom thorugh my trinity, the connction works the first time, but switch off both the tomtom and the trinity, the connection never works again and has to be re-setup.
The Parrot will connect to the phone, but sometimes will not connect at all until i reset the trinity, when it does connect sometimes the sound and mic wont be routed to the car kit and you have top physically pick up the phone , not a good idea in communist Great Britain when your driving!
Ive tried different ROMS, I even tried downgrading my radio to 1.45 with no success.
The trinity is a great device but not being able to use the bluetooth car kit safely, and the tomtom plus services, is seriously making me consider going back to my SE k610, which I really dont want to do but I know works flawlessly.
Thanks in advance.
Click to expand...
Click to collapse
Hi there,
I havebeen struggling with issues on my P3600i (trinity) and Parrot 3200 LS. It seems parrot have issues with WM6. The problems I was facing was reset of parrot during call, random divert of calls through handset, I answr sometimes and have to turn off handsfree on the call menu on my phone so I can hear the caller through my handset.
Today I downloaded the latest software for the parrot and uploaded it to the car kit via bluetooth on my laptop. There is a new feature in the paired devices list of "Forced Connection". I used that and low and behold my issues apparently have stopped. I noticed that my phone book isnt synchronising but the fact that I can actually use the car kit is fantastic!!!! I have been dealing with these issues for over 7 months!
Update to the latest version and see if this fixes it.!.!.!