Wondered if anyone can help me with this, been searching for a soloution for hours and can't find one.
I have photos attached to a good deal of my contacts, and when dialling via a speed dial button the contacts photo is not displayed, (Rhodium dialler and canvas), they are when dialling in any other way just not on speed dialling, and this annoys me greatly.
What I want to do is either, make it so that they are displayed, or, disable speed dial completely so that they don't show up on the phone canvas, and you just see recent calls and contacts.
I worked out how to delete the speed dials from 2-9 but can't get rid of the voicemail one, does anybody know how to make this deleteable ?
Thanks' in advance for any help given, Dave.
Related
Just got my new Orange M3100 (Tytn) and I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Also trying to do similar with Bluetooth settings as I swap my BTheadset between phones just as frequently. I have found a link on this site to a utility to do that but not had chance to try it yet...
Can I just make a shortcut to that as well ??
Apart from that it appears a excellent device, running Tomtom etc without any problems....
Thanks in advance Phil
All the ways I tried to create such a shortcut do not work, because it requires an USSD "call". I asked WM5NewMenu author to implement USSD handling, will see...
For now the best solution I've found is to assigh speed dial keys in the dialer to USSD sequencies to divert and cancel diverts. It's OK for a while because speed dial keys can be easily accessed with one hand only (green phone button, then arrow left or down).
EDIT: In case you don't know USSD sequences... You'd better consult your operator to be sure. For me:
Divert all calls: **21*number_to_divert_to#
Cancel divert of all calls: ##21#
There are also codes for conditional diverting, of course.
Hi Phil,
What Lurker0 has mentioned is a good idea. You can save those strings as a number in a contact and maybe assign a speed dial or voice tag to that contact for speed? I guess one contact to enable and another to disable. The commands Lurker0 mentions are standard over all networks.
I'm not sure if there are ways to send AT commands to the modem in the TyTN (M3100) but it is another possible way to do it if someone knows how, if not then it might be useful info to someone else.
The AT command you need to send is AT+CCFC=1,1,<number>,128,1,,, this is the number in local format (no +44) like 07968xxxxxx to enable and AT+CCFC=1,0 to disable.
Gavin.
Phonealarm may be a simpler solution as I think u can add a forward number within a profile so just switching profile from the Today screen (phonealarm skin) would do the trick...
www.pocketmax.net
I've not had any dealing with the ATM commands so to be honest I wouldn't know were to start. I've just tried to install Phone alarm in my Orange SVP
M3100 but after asking me if I need and extra language the software just locks up.. Soft restart then required....
I managed to find the directory that it was installed in, the setup prog is there but I can't find the executable file, I guess that it has not got that far !!!!
Any help please...Phil
I'd suggest to try USSD codes as the easiest and 100% working solution.
Tried the ussd numbers in the contacts list.... works very well both divert and cancel divert... Just need to setup the speed dial now, were is that manual !!
Thanks again.
Phil-w
Hi Phil,
Go into the phone skin (green button) > Menu > Speed Dial...
That's you...
Gav.
Speed Dial is also at "green phone button" then arrow left, or arrow down, or wheel down. So one hand operation is possible.
Many thanks to you both... Nice to find helpfull people on here... Phil
phil-w said:
I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Thanks in advance Phil
Click to expand...
Click to collapse
Phil,
I do the same and installed the O2Plus (and patch) software which tweaks the today screen and gives direct access to mutiple profiles for different forwarding options - works really slickly.
Check this forum for the .cab files
Hope that helps.
Rgds
Lifechanger
i tried putting the codes in a speed dial but Tytn unhelpfully said i had to enter the sequences in from the phone pad directly. all i did was put the **21*<no># in as a speed dial. did i miss something somewhere?
If you are rooted, start a shortcut to "Activities". Scroll down to "Phone", expand that, then scroll down to "Call forwarding". Select! Easy peasy.
Hi.
I've been happily playing and customizing my TyTN and everything was going very smoothly until today. So, I was wondering if someone might know what the hell is going on.
Everything was working fine today in the morning. I have checked my voice mail as usual using the shortcut that gets automatically enabled in speed dial under number 1. Since then, I have installed Handmark Pocket Express, which also installed MS .NET CF 2.0 and then when I went to speed dial Voice Mail was no longer there. And I cannot create a shortcut for that number at all. It does not give me an option to use number 1. Soft Reset did not help. Installing a different SIM from my wife's phone did not help either. Before I start uninstalling and Hard Reseting, I was wondering if anyone else seen this issue before.
HTC TyTN
Latest SA ROM
SuperCID
Any help will be appreciated.
bumping this up
Hi,
Go to phone ==> speed dial ==> long tap on the number 1 (first top) ==> modify, then screen phone, select fifth line "voicemail and SMS" and tap display parameters ==> then, on the voicemail screen key into the voicemail box your number to call your voicemail. After going back to the speed dial screen your voicemail should be recorded.
BR.
Missing Voicemail Speeddial
I have a similar problem, but in my case not only is the speed dial for voicemail missing, but there's no number one on the speed dial screen. When I try to create a new speed dial, the numbers that are listed as either available or already assigned begin at 2. There's no "1" on the speed dial screen so I can't use your solution, and I've created a new speed dial for voicemail, but I've assigned it to 2. How can I make speed dial 1 visible?
can i install a dialer skin for IM+ skype from shapeservices.com????
i want to make calls w/ that program and i would like to be able to dial out.
two other things. How can i make a link in contacts, so i can choose to dial out via the skype in shapeservices, or normal phone.
the last is i want a shortuct on my desktop to that special dialer for shape services...
i was thinkin bout this because then i could use area for contacts Have link to dial out via the skype program in shape services (because it dials via incoming calls not over VOIP) and on one of my softkeys i could like it to the dialer for the shapeservices skype program. That way i can click the green button on my phone to dial normal phone, the left softkey to dial shapeservices Skype, and my right softkey either the PCM contacts (if that is easier modded) or the original contacts (doesnt matter to me.)... anything>?
is there at least anotther program that works in the way IM+ Skype works. how you dial a skype # and it goes over the phonelines as an incoming call, that way you get full call quality as well as, since i have unlimitd incoming minutes, then i get unlimited talkin!
any other program that does this, where i can do what i want mentioned in the posts above?
bumpz it up to the top
anybody w/ any concpet lin k this
I don't know why but reading your post makes my head hurt...
I still don't know what you're asking for... so all I can suggest is, have you tried Fring?
im talkin about basically could i get a dialer skin for skype IM+
anybody?? i mean i could then put a bookmark in params to go directly to the dialer skin>????
Is there a way, other than adding *31# infront of the stored number, to enable caller ID per contact in my 'people' tab?
My number is blocked by default (and I'd like to keep it that way for a variety of reasons) but would like to enable the ID when calling my wife and select other people. The workaround so far has been to add the code above infront of the number but then it seems SMS messages are not going thru which is less than ideal (I could add a separate number entry for messages I guess, but still).
Having looked at the Phone settings it seems I'm able to select "Contacts only" which in my mind (as a dev) means someone has already written a app (or simply extended the current Contact app) to allow for this on a per-contact basis.
Any ideas?
You can try this MagiCall
http://www.mobiion.com/
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
+1 same interrest same issue.
But as time goes on you can use the following workaround: or let's say this is the way I manage it......
If you use the traditional SMS Mode and hit reply sms goes through.
This doesn't work as mentioned in Konversation Mode.
It's uncomfortable because the konversation mode is the better client...but the only way you can send sms to someone stored as *31# contact.
It seems as if the konversation mode always refers to the number stored in your contact, whereas the traditional mode refers to the number which comes with the sms.
I hope someone can fix this, or has a better workaround, I'll be interested to!!!
SWINXNL said:
I was also looking for this.
The MagiCall features don't mention the option to set caller id per contact.
@emigrating: Did you fix it another way?
Anyone else knows a good solution?
Click to expand...
Click to collapse
use MagiCall. Set up a rule: for your wife's phone #, prepend *31#, then dial.
I use it for long distance calls. For all phone # not in my home area code, prepend 1511 (chaper long distance call provider), then dial. A small problem with this: need to disable this rule when roaming in another country.
Give it a try, it is good.
I've downloaded the trial version and set up a rule for Outlook categories, just to test. Change the dialed number to #31#{phone}. When I call someone in the particular category, the MagiCall icon appears in the topbar and my device freezes....
No big problem, I restarted my device to try again.
The same thing happens. Again I take out the battery and restart the phone.
At that point the device became terrible slow somehow.
With a little patience I succeeded uninstalling the app.
Restarting again.
Fortunately, my phome is normal speed again.
Sorry, I'm not a big fan of MagiCall at this moment...
----
Edit: Just trying again, because I can't find a real alternative.
The problem seems to occur when I choose Outlook Category as filter.
Just bad luck for me by choosing that option for my first try.
The program seems to respond on other conditions.
It could be my phone only, otherwise maybe I will contact Mobiion about this..
Edit2: The problem was known and was fixed in a newer version.
So it seems to work after all
Hi guys, I've just moved over from iphone so still finding my feet with android.
For the most part android is far superior but the contact side of things is still bugging me. This is what I want to be able to do:
1. Have my call log as calls only, not texts. I know you can change this to view calls received, dialled etc, but it soons defaults back and shows everything. I just want my log to have dialled and received and nothing else? I'm sure i've read somewhere on the net that this was possible on the SGS through a hack??
2. I want to set up a favourites list of say best mate, gf, work etc and just be able to press their name and it dials there number, not opens another window that shows history, text option, dial option video call option, i.e. just direct dial. I also would like this to be the first screen that opens when I press my phone icon on the dock??
I've set my gf up on my desktop as a direct dial shortcut, but I don't want to be doing that for everyone. I've got a load of contacts but maybe only dial 10 at most on a regular basis.
are there any hacks or thrid party dialers that do this??
Cheers
Lee
landerson07 said:
Hi guys, I've just moved over from iphone so still finding my feet with android.
For the most part android is far superior but the contact side of things is still bugging me. This is what I want to be able to do:
1. Have my call log as calls only, not texts. I know you can change this to view calls received, dialled etc, but it soons defaults back and shows everything. I just want my log to have dialled and received and nothing else? I'm sure i've read somewhere on the net that this was possible on the SGS through a hack??
2. I want to set up a favourites list of say best mate, gf, work etc and just be able to press their name and it dials there number, not opens another window that shows history, text option, dial option video call option, i.e. just direct dial. I also would like this to be the first screen that opens when I press my phone icon on the dock??
I've set my gf up on my desktop as a direct dial shortcut, but I don't want to be doing that for everyone. I've got a load of contacts but maybe only dial 10 at most on a regular basis.
are there any hacks or thrid party dialers that do this??
Cheers
Lee
Click to expand...
Click to collapse
I can help you with #2. Just swipe right on your favorite and you call that favorite immediately. Swipe left to immediately send a message.
landerson07 said:
Hi guys, I've just moved over from iphone so still finding my feet with android.
For the most part android is far superior but the contact side of things is still bugging me. This is what I want to be able to do:
1. Have my call log as calls only, not texts. I know you can change this to view calls received, dialled etc, but it soons defaults back and shows everything. I just want my log to have dialled and received and nothing else? I'm sure i've read somewhere on the net that this was possible on the SGS through a hack??
2. I want to set up a favourites list of say best mate, gf, work etc and just be able to press their name and it dials there number, not opens another window that shows history, text option, dial option video call option, i.e. just direct dial. I also would like this to be the first screen that opens when I press my phone icon on the dock??
I've set my gf up on my desktop as a direct dial shortcut, but I don't want to be doing that for everyone. I've got a load of contacts but maybe only dial 10 at most on a regular basis.
are there any hacks or thrid party dialers that do this??
Cheers
Lee
Click to expand...
Click to collapse
hmmm, can't say i can see a way around No.1, other than using a new dialer/contacts app such as Go Contacts or Dialer One etc..
must say, i actually quite like the comprehensive log, coming from Sense and Stock roms with calls only, i like having it all in one place...
Dialer One would be my choice, but only as i used it on CM7 on my Hero for its smart dial feature... can't comment on Go Contacts
hope this helps
Dickie
I use loads off texts a day so within 10 mins of dialling someone their details are long gone
I'll check out Go Contacts and Dialer One though, thanks for the recommendations
This is a Samsung thing, regular android does not put texts with the call log. I don't think I'd like them to be combined like that.
it is the right thing to do
RogerPodacter said:
This is a Samsung thing, regular android does not put texts with the call log. I don't think I'd like them to be combined like that.
Click to expand...
Click to collapse
I like them combined. There again, there could be an option to control it.
Go Contacts is just the ticket
Thanks guys, much better now