I rooted phone succesfully usb drivers loaded now when i plug in the phone in debugging mode it wont load the drivers? any insight??
I am running the OTA ROOT ROM
I have a G1 and recently it started rebooting. I can not get in to the recovery image I can how get to the HBOOT screen. I am trying to flash an recovery.img using adb but I can not enable USB debugging. Is there anyway to do this with out having USB debugging enabled?
To ans directly to your post question, No. You can't use ADB without Debugging.
Hi Folks:
i have read many threads on this problem and how to resolve it but bear with me as I am a newbie.
I have a nexus 4 with bootloader unlocked and USB Debugging disabled. I am looking for some step by step advice on how I would be able to enable usb debugging so that i could access my phone remotely to reset the lock pattern and backup my information. I have adb running on a windows PC and I know how to access stock recovery mode. I have only been able to connect to my device via adb when accessing the ADB sideload function in the recovery console. I have seen that you can sideload a kernel with usb debugging enabled but I have no clue on how to achieve this. i also need to make sure that whatever I do the data will not be affected. Any assistance would be very helpful. Thanks in advance.
Phranqy
Not sure if this would work but you could boot into download mode, flash a custom recovery, boot into custom recovery, and mount the partitions to copy the data to your computer.
Edit: if the digitizer failed, I don't think my method will work unless it is just in the ROM that the digitizer doesn't work.
So i decided to root my A1. But fastboot isn't working for me.
Tried with previous adb files.
Adb works properly.
But when device is rebooted into fastboot mode. Fastboot isn't and to talk to it.
Updated adb and fastboot (sdk tools and even in AIO tool)
Just adb works.
Reboot to fastboot and my device is not detected.
Disabled driver signature enforcement in windows 10
OEM unlocking allowed.
Usb debugging on.
Tried multiple times.
Nothing seems to work.
Maybe driver problem but since adb works i don't think that's the problem and i have installed it again from AIO Toolkit.
Try different usb cable or usb 2.0 port
I had similar issue, fastboot was detected but haven't been able to do any command. So when the phone was powered on with selected usb to transfer files, in device manager the phone was listed as "Android phone - Android Composite ADB Interface", I updated the driver to "ADB Interface", rebooted in bootloader and was able to communicate through fastboot.
bpodnar said:
Try different usb cable or usb 2.0 port
Click to expand...
Click to collapse
I would if i could get my hands on one. But i can't not for few more weeks.
Adb is working fine. File transfer is working fine. Charging is working fine.
So I don't think cable is at fault
alkesh95 said:
So i decided to root my A1. But fastboot isn't working for me.
Tried with previous adb files.
Adb works properly.
But when device is rebooted into fastboot mode. Fastboot isn't and to talk to it.
Updated adb and fastboot (sdk tools and even in AIO tool)
Just adb works.
Reboot to fastboot and my device is not detected.
Disabled driver signature enforcement in windows 10
OEM unlocking allowed.
Usb debugging on.
Tried multiple times.
Nothing seems to work.
Maybe driver problem but since adb works i don't think that's the problem and i have installed it again from AIO Toolkit.
Click to expand...
Click to collapse
I hope drivers are up to date.
alkesh95 said:
I would if i could get my hands on one. But i can't not for few more weeks.
Adb is working fine. File transfer is working fine. Charging is working fine.
So I don't think cable is at fault
Click to expand...
Click to collapse
Did u tested this? Reboot to fastboot mod and connect mobile to pc. then right click my computer then device manager. Then check for A1 port. Update /install driver Automatically from internet. May be it will help , may be not.
ADB drivers are different than fastboot. If you can detect with ADB and not fastboot, I would suspect you have a driver problem. Boot into fastboot, then check device manager for your device. It might not have any drivers installed and be an unrecognized device, or it could have incorrect drivers installed. My device needed fastboot drivers, I had the same problem as you.
Thanks all of you. Fastboot driver was the issue.
alkesh95 said:
Thanks all of you. Fastboot driver was the issue.
Click to expand...
Click to collapse
I have the same problem, can you send me the fastboot driver please?
vu2pmc said:
I have the same problem, can you send me the fastboot driver please?
Click to expand...
Click to collapse
Follow the step. Windows will download correct driver automatically
Hello,
I've got a a500fu device with no screen. How can I connect it to the computer or any other device?
I've checked an article https://forum.xda-developers.com/showthread.php?t=2786395 but USB debugging is not enabled on my device and I do not know how to enter into ADB mode so I could send commands from my PC to the phone.
Update: I have managed to install Clockwork Recovery.
How can I blindly proceed from there to enter adb commands to enable USB debugging?