Rooted MT3G Tmobile Tethering with T-mobile Hotspot combo - myTouch 3G, Magic General

Hey guys, I recently downgraded to R29, did the root thing, upgraded to TMO OTA DRC83 - US with the expansion (basically donut 1.6) and then loaded the HTC Hero Theme (all found on http://forum.xda-developers.com/showthread.php?t=538456)
Now I've successfully tethered my phone's 3G using it as a wifi and I've did some searching on these forums on setting up a PAN via BT, which doesnt seem like the current build allows for it yet am i right?
Well my problem is that Tmobile 3G is pretty terribad compared to the other 2 companies (Verizon + ATT). I have the 24.99 data plan and I've heard that it allows your phone free access to T-mobile HOTSPOTs at places like Starbucks.
I recently tried to connect the MT3G to one of my wireless networks and successfuly used internet on it. Now when I tether it as a wifi and access the MT3G on my computer and still have the MT3G connected to my home wireless network (note: tethering resets the wireless so you have to reconnect), the MT3G accesses internet fine. However, my computer isn't able to go on the internet at all even though it says it's connected to the MT3G.
Is it becuase you can only have one wireless "instance" @ a time--- aka tether + wireless network = no no on MT3G?
I know the USB tethering is an option, but i'd like my girlfriend and I to both be able to use it too.
Any help is appreciated. Thanks!

This answer might seem vague and very minimalistic...however; the T-Mobile HotSpot Era has come to and end. You're not very likely to have "usable" service from a "HotSpot" anymore.

Related

Wifi Xoom and BT Tether

I've found several threads on the subject of Tethering a Xoom via BT and Wifi but I'm not having much luck and there's a lot of confusion about providers/Xoom versions/phones, etc. so rather than tag on to a thread I hope it's ok to start a new one.
I have the following:
Wifi Xoom (NOT the Verizon version, the one that just came out on March 27th here in the US)
HTC Hero GSM - completely unlocked (purchased in Europe). Running Android 2.1 standard update from HTC. I'm using the AT&T data plan but device is not an AT&T device at all.
I would like to see if I can Tether the Xoom to the phone and use the data connection I have on it. I understand that the Xoom's chipset doesn't allow for Ad-hoc networks. I've tried to do a Wifi Tether and although that works from my Laptop to my Phone the Xoom doesn't see the ad-hoc network. I don't believe there is any way for me to make the Wifi Tether work in Infrastructure mode so I don't think there is an option there (unless the Xoom can be modified somehow to see Ad-hoc).
So now I'm trying to use Bluetooth Tethering. I've tried both PdaNet and Wifi Tether (v2.0.7 and phone rooted via SuperOneClick). Both seem to start up fine and are running. I then pair the two devices but as many others have reported, I don't see any Tethering options on the Xoom so I'm stuck.
I've tried different orders of things... run Wifi Tether, pair, vs. pair then Wifi Tether, work with Airplane mode on vs. off, Wifi on vs. off, etc. but I never see that Tether option show up.
Anyone have this working with an HTC Hero GSM by any chance? Note that this is the Wifi-Only Xoom which seems to have different features than the Verizon 3G Xoom. Could it be that the Hero itself doesn't support this profile? Or can the Xoom be modified to force it to think the device is tetherable.
I'm not sure if rooting the Xoom would help any or maybe flashing a custom ROM like CM7 on the Hero would help any. I'd prefer not to have to do this but if someone has this working with my exact configuration I'd give it a try.
Any help would be appreciated.
From what i know, most tethering tech /apps are establishing a ad-hoc network' which the xoom isnt capable of...
I too have the Xoom wifi only version with a HTC rooted CDMA Hero.
As everyone knows now the Ad hoc will not tether with the Xoom infrastructure as of the latest.
I too get full bluetooth tethering signal from Wireless Tether, but like you the Xoom will "pair but not connect". As you, I am confused as to whether it is the Hero or the Xoom Wifi which will not connect to the bluetooth tether.
I suspect it is the Xoom Wifi, but would also like a definitive answer and better yet a viable solution.
I have no issue tethering my Xoom (Wifi model) with my Verizon Motorola Droid (1 Gen) over Bluetooth.
My Droid is full rooted with custom Gingerbread ROM (2.3.3) and Overclocked Kernel from ChevyNo1. His kernels are everything enable such as tethering and VPN. This might be the difference for some.
The one annoying thing is that everytime I enable the hotspot on my Droid, I have to go into the Xoom settings and enable tethering on the connection to my Droid. This also has to be done if either device goes not a range and brought back. I am trying to find a widget or a Tasker script to auto enable this.
Be sure to already start the wifi tether program on your phone (selecting the blutooth option on it) then bring up the blutooth settings menu on your xoom, just press and hold the little wrench you see to the right of your phone icon. it should bring up the tether option...just press that and you should see it conect via blutooth.
Just be sure to have the wifi tether app on your phone already on and set for blutooth. This works for me everytime (running the atrix) and shoujkd also work for your phone too.
Still no luck on my side with the Tethering on while I do the pairing and/or when I touch the wrench icon.
I'd like to understand more about how the Bluetooth profile is detected. Does my phone have to publish out a certain profile? Or does the Xoom have a list of device types that it knows are tetherable? I've read on another forum that it seemed like Motorola devices like the Droid worked whereas HTCs didn't seem to. I'm wondering if the Xoom detects the type of phone it's connecting to and decides whether it's tetherable or not... Anyone know? If this is the case maybe there's some file that can be tweaked on the Xoom to include additional devices or change the phone to broadcast out a different device name, etc. Maybe I should try changing my device name to 'Droid' or something.
Just guessing at this point....
I had the same issue with my droid, bluetooth tether is a pretty good alternative. I made a video of it, works with most phones with that create the Ad-Hoc. Check out video below to see the easy steps involved. Root on phone required.
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
rosso said:
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
Click to expand...
Click to collapse
I ran into a little bug, and it wouldn't recognize my droid. I had to unpair and turn on the bluetooth tether app. Then pair. The xoom then recognized the bluetooth tether. Hopefully this works, I apologize if it doesn't.
My wifi Xoom works perfectly paired with a CM7 Nexus One.
App: wireless tether
pd: key is the wrench
I tried renaming the bluetooth device name to 'Droid' but that didn't make a difference. I'm sure I'm following the same steps as in the video. Somehow the Xoom doesn't see the Hero as a Tetherable device...
Maybe there are some differences in Bluetooth chipsets?
Wifi tethering works with the Desire Z or the G2
I assume the network it creates is not an ad-hoc otherwise the xoom wouldn't have recognized it?
It's either not ad-hoc or you're using Bluetooth. You'd have to explicitly choose Bluetooth tethering in the Wireless Tether app so I assume you're using Wifi.
From what I understand some phones (the ones that are meant to be used as wifi hotspots) do broadcast in infrastructure mode rather than ad-hoc so I assume that's why it works for you.
Also of note is that Honeycomb only supports PAN tethering, and not DUN tethering.
Your phone also has to have "bluetooth tethering" turned on (however you do it, I don't have an android phone) so that the Xoom can discover the PAN bluetooth service.
Interesting. Something to read up more on. I'm using Wireless Tether to do the Bluetooth tethering but maybe I need something additional switched on. At least it's another direction to look at....
Seems like someone figured out how to get the Xoom to listen to Ad-hoc networks but that needs the Xoom rooted so I'll also research that. I prefer Bluetooth tethering since it uses less juice on the phone....
It does seem that "Wireless Tether" which is what I'm using on my HTC Hero, is running in PAN mode. If I look at the app's directory it has a pand executable, etc. and when I'm running the tether it is running pand in the process list.
Still, if I pair, even while it's running pand the Xoom still doesn't recognize it as tetherable. Grrr.... Wish I had another bluetooth client I could try to connect to see if it's the phone or the Xoom but I don't have anything else.
I'm wondering if it's because I have the Android 2.1 update for my Hero. Wireless Tether seems to support the 1.5 version of the Hero but doesn't mention 2.1. Maybe there is an incompatibility there...
Anyway, will continue to try to figure it out.
Rosso, your not on your own, I am still trying to figure this out on my hero running froydvillian. I have done the wifi ad hoc mod and thats working for me but BT tethering woudl be better, I will let you know If i ever find a solution.
I did see someone else loaded CM7 for the hero and then BT tether worked, but CM7 seems to have been pulled for the hero at the moment due to stability issues.
I have a droid eris (verizon's cdma hero) and I have the same exact problems but I'm on cm7and using wireless tether. I can get the to devices and connect via tethering but 5 seconds after that my phone reboots.
Just picked up a wifi-Xoom for my wife over the weekend. Tried to get it connected to my phone (HD2) as a wifi hotspot and was having problems (the ad-hoc problem). The xoom wouldn't even see the hotspot. I am running AmeriCanDroid 0413 build and it has wifi tether v. 3.0-pre11. So I switched back to winmo and still nothing, then I tried going to Darkstone SuperRam 1.5 (my fallback build). It has an older version of wifi tether, I think 2.06 or something like that and got the xoom to connect. I haven't had a lot of time to fool around with it, but it was able to get a network connection. Maybe you could try an older version of the wifi tether? I haven't experimented with the BT tethering yet. I don't want to root the xoom yet, maybe when my wife is tired of it.
/edit
Just checked the wifi-tether website and there is a new version of wifi tether and it supports softap which may help the xoom recognize the wifi hotspot.
Hi, I have just managed to get my hero bluetooth tethered to my htc hero.
The process I followed was basically what everyone has said:-
download wireless tether i am using 2.0.7
1. start bluetooth on phone and xoom (make discoverable)
2. Do not pair the devices yet
3. start up wireless tether, select bluetooth and tap to start the actual service
4. go back to bluetooth on your xoom and pair the devices
I then got an icon I had not had before and when I tapped the wrench I got the option to tether.
As for wifi tether your phone needs to put out infrastructure wifi for the xoom to see it, if its ad-hoc, you'll need to do the wifi mod so that he xoom sees adhoc
although as stated the new version of 'wifi tether' (which just seems to be the new name for the 'wireless tether' app) may fix that? but doesn't seem to support bluetooth as the 2.07 version does

Tethering a 101 to an Android Phone

Can anyone help me tether my 101 to an android phone (Orange Sanfrancisco AKA ZTE Blade).
I have rooted the phone and tried a few apps but I cant seem to get it to work.
I'd prefer Bluetooth PAN, but I'd settle with USB or turning the phone into a wifi hotspot (Infrastructure mode).
Are there any apps out there that are known to work that you'd recommend?
Many thanks
Dude, good luck. I have been trying to tether via bluetooth since I got my A70 with no luck.
If you have a T-Mo phone with wireless hotspot, you can use that. For some reason, the Archos won't see a wifi hotspot done by an app like Wireless Tether because it's ad-hoc, but it will see the T-Mo wifi hotspot.
That's what I do now. It's a killer on my battery, but I just make sure I have it plugged in or my extra battery on hand.
Have you tried the WiFi Hotspot on most Android phones instead? That's what I use. The 101 just finds the Wireless network then.
On mine it is under
Wireless and network - Tethering and portable hotspot - Portable Wi-Fi hotspot settings
Pete917 said:
Can anyone help me tether my 101 to an android phone (Orange Sanfrancisco AKA ZTE Blade).
I have rooted the phone and tried a few apps but I cant seem to get it to work.
I'd prefer Bluetooth PAN, but I'd settle with USB or turning the phone into a wifi hotspot (Infrastructure mode).
Are there any apps out there that are known to work that you'd recommend?
Many thanks
Click to expand...
Click to collapse
I am able to use Wireless Tether from the market. Go into settings and put a check in the Use Bluetooth option.

WiFi Router / Hotspot / Internet Sharing

I'm looking for the cheapest phone that works with T-Mobile 3G and can be used as a WiFi hotspot. I like my current phone, but it doesn't have a WiFi hotspot feature, so I just want something cheap where I can swap SIM cards when tethering is needed.
I have a grandfathered T-Mobile account with a $10 unlimited data plan called Web2go. Web2go doesn't work with most Android phones, so my choices are Windows Mobile and Symbian.
Do either HTC WiFi Router or WMWiFiRouter work with the T-Mobile HTC Dash 3G? I have see lots of conflicting reports. Some people say it works, some say it doesn't.
Does anyone here have any personal experience and can attest to it working or not? Is there a special trick to make it work?
...or, does anyone have any other ideas for an alternate phone? These seem to go for under $40 used on ebay, so currently it's my leading candidate.
Thanks!
Just in case anyone was following this thread -- I ended up ordering a used Dash 3G and answering my own question.
HTC Wifi Router -- Doesn't work.
WMWifiRouter -- Does work.
Not sure if it's a hardware or software limitation, but WMWiFiRouter only supports WEP encryption on the Dash 3G, but it also supports USB connection, and the connection driver installs automatically without needing to download from the internet.
WMWifiRouter was made free a couple months ago when the Windows Mobile Marketplace shutdown. I learned about this from this thread on slickdeals.net: http://slickdeals.net/f/4747668-WMWifi-Router-Free-Windows-Mobile-Hotspot-program
Their website seems to be down at the moment. They may have shut it down completely.
http://www.wmwifirouter.com/
I have the installer hosted on my skydrive here.
http://sdrv.ms/MPc5DL
Serial: EDFZM-HTXKJ-TJTRH-ZTRCB
This is not a unique key. This is the generic key they told you to enter when the application went free.

[Help] On Verizon, UDP, hotspot being flaky

Hey all,
So I have UDP with Verizon. Got my phone the other day and activated it before I inserted my VZW sim card. Tethering worked fine until today (after Droid-Life posted about it), and now it will work for a few minutes and then I lose internet connectivity on both the phone and hotspot.
To get around this with my previous Moto X 2013, I used the wifi tethering apk from here: https://code.google.com/p/android-wifi-tether/ and then only allow one device at a time to connect. This app doesn't seem to work with Android L (or I can't get the settings right).
Is there anything else I can try? Or is there any way to limit devices with the stock tethering?
(edit)
Other info:
Phone is unlocked.
TWRP installed (phone tethered fine after TWRP installed)
Phone is rooted (same as above)
I installed Xposed today, started having issues. Uninstalled Xposed, still have tethering issue.
(edit2)
Wife's phone, a rooted VZW Samsung GS4 is also being flaky with wifi tethering. I'm guessing that it isn't my device tonight...
hbar98 said:
Hey all,
So I have UDP with Verizon. Got my phone the other day and activated it before I inserted my VZW sim card. Tethering worked fine until today (after Droid-Life posted about it), and now it will work for a few minutes and then I lose internet connectivity on both the phone and hotspot.
To get around this with my previous Moto X 2013, I used the wifi tethering apk from here: https://code.google.com/p/android-wifi-tether/ and then only allow one device at a time to connect. This app doesn't seem to work with Android L (or I can't get the settings right).
Is there anything else I can try? Or is there any way to limit devices with the stock tethering?
(edit)
Other info:
Phone is unlocked.
TWRP installed (phone tethered fine after TWRP installed)
Phone is rooted (same as above)
I installed Xposed today, started having issues. Uninstalled Xposed, still have tethering issue.
(edit2)
Wife's phone, a rooted VZW Samsung GS4 is also being flaky with wifi tethering. I'm guessing that it isn't my device tonight...
Click to expand...
Click to collapse
I have a similar issue but not quite the same. I am also on UDP vzw and the behavior that I get is that the hotspot connection to the Internet is barely usable at all. Some pages load, sometimes but often they timeout. But with all of this the connectivity on the handset itself is unaffected. I'm going to try a usb tether on my Mac with the HoRNDIS package soon to see how the speeds compare. Maybe it's just the wifi tether and sub will be okay?
There have been some that are specifically noticing DNS issues. Maybe that's where the root of the problem is.
Forrice said:
I have a similar issue but not quite the same. I am also on UDP vzw and the behavior that I get is that the hotspot connection to the Internet is barely usable at all. Some pages load, sometimes but often they timeout. But with all of this the connectivity on the handset itself is unaffected. I'm going to try a usb tether on my Mac with the HoRNDIS package soon to see how the speeds compare. Maybe it's just the wifi tether and sub will be okay?
There have been some that are specifically noticing DNS issues. Maybe that's where the root of the problem is.
Click to expand...
Click to collapse
Ever since I found out that VZW allows you to add the tethering package to your UDP line and not mess anything up, I bought it and have experienced zero issues. Before that, every few days I would have some bad DNS issues where google would work, but nothing else would. Now my phone is my ISP and I've had no issues.
My (current) network setup: phone (wifi tether) -> bridge computer (internet sharing) -> router (Asus AC66U) -> wired/wireless network.
I haven't tried the bridge computer as an actual network bridge as that caused some flakiness before... but that was when I wasn't paying for tethering. Eventually I'd like to use my phone as a 4g modem that is directly hooked up to my router.

Running 4GLTE through router (USB DONGLE/CLOCKWORKMOD)

Hello everyone!
So where I am living I cannot get reliable internet service and currently have Hughesnet (satellite isp) that I want to stray from. I have picked up a prepaid true unlimited data plan from Metropcs and want to use it as my default isp as the speeds are astronomical compared to Hughesnet. They are of course limited in usage for tethering and I would have to use a masking application and have chosen Clockworkmod Tether. What I want to do is run a USB dongle to my router (ASUS RT-N56U), connected to my phone (SAMSUNG-SM-G900A), running Android 5.0 with Clockworkmod Tether. Is this possible to do as the router doesn't have a sister application with the phone i.e Pdanet+ needs a windows application running to work?
All feedback is welcome!
So I found a video that kind of explains how to do so but I still have questions. With the process he is demonstrating the phone is using the wifi hotspot option to broadcast signal to the router. My question is.. with all the tether masking apps (PDAnet, FoxFi, Clockwork) you need to connect via USB to work. How would I get around this?
https://www.youtube.com/watch?v=4ykqFgJi-ZE

Categories

Resources